Setup Installation :: Building New System Using Existing SSD Boot Drive
Sep 9, 2013
I built a large desktop system a few years back and it's been upgraded with various bits and pieces including an SSD boot drive. I'm looking at putting together a much smaller system in a Shuttle XH61V and I want to use my existing 2.5" SSD. Can I just put the SSD in and clean install Win 8 from the original system builder disk I bought or will something go wrong because there's already an installation on the drive?
I just received an Asus Zenbook with 8 preinstalled.
It was configured with static IP and my office configuration, I would like to split the existing partition, create a new primary partition and clone the Win 8 installation in the new one.
Then set up a dual boot configuration, so I can have a clean "office config" and an "home config" with the same licenses and software in which I can mess with the configuration and setup my home stuff (DLNA server, access to home headless server, software to flash android handset, etc).
I am about to upgrade another PC (about 4 months old) currently running Windows 7 64bit. The PC is set up so that although the PC has the OS and programs on the SSD (C drive), all other data and info is on the 2Tb hard drive. Their is only a single user with no password and the PC was setup (configured) so that the user profile knows to put that user info and data on the 2Tb hard drive.
I want to do a clean install and am happy to clear everything on the C drive (SSD) and the hard drive. When installing Windows 8 from the ISO image on a DVD, how do I create the similar situation that I had for user profile when running Windows 7?
Also is it possible to be able to boot up straight in to the user without having to enter a password, as I can currently do on the Windows 7 boot?
I have just upgraded an older Windows Vista PC to Windows 8 Pro through a clean install and that went perfectly, but only had a single 1Tb hard drive (C drive).
I have a new Asus X102BA it has modest performance so as I have a spare OCZ 120GB ssd I thought I would see if it could be improved. I have tried to install win 8 Pro using a powered DVD drive but I get the message in my title. The primary partition is shown on screen and I have nothing but the DVD drive plugged into the computer...
I have a VHDX which I sometimes boot from and sometimes use as a VM in Hyper V. It has Windows installed on the default C: drive.
This is somewhat confusing as the C: may be the original C: drive or the VHDX C: drive (with the original C: drive renamed to H: in my case). I want C: to always be the native boot and T: (for example) to always be the boot for the VHDX.
Can I change the VHDX to have Windows installed to say T:? I was thinking of renaming all instances of C: to T: in the registry and updating BCDEDIT. It is not possible to change system disk in disk management.
If this is not possible can I re-install windows on the VHDX and specify a different letter and C:?
This is how it looks when booting from VHDX:
Code: DISKPART> list disk Disk ### Status Size Free Dyn Gpt -------- ------------- ------- ------- --- --- Disk 0 Online 465 GB 1024 KB Disk 1 Online 931 GB 31 GB * Disk 2 Online 483 MB 0 B Disk 3 Online 65 GB 381 MB
I am planning on building a new computer, and I want to put a 250GB SSD (Samsung 840 EVO) in it to use with 8.1 Pro. However, most of the programs and data I need are still on the old computer's boot drive, specifically all of my STEAM games (none of which I have the DVDs for.)
My question is if I can create symlinks to the old boot drive without losing data on it. This will most likely be a temporary measure, as the drive's a fairly slow 5900RPM Barracuda, and I want something faster, but I can't afford a better one just yet...
Been running this system since 2010 win7 and upgraded to win 8.
When I switched over to win 8 I also bought an ssd drive (C) and it seemed to be working fine ever since.
I recently bought a couple 3TB drives and wanted to replace the old HDD (F), installed the drives, transferred all data off F and then shut down the pc. I took F out of the pc and it won't boot.
Going from loads of tutorials on here I found that F was listed as active and a system drive.
Any attempts at making it inactive and activating C resulted in nothing. I used my startup repair disc but there was no OS listed to repair??
Whenever C is active and F inactive, I've no options at all with startup repair.
I reinstalled windows 8.1 on my Samsung NP530U3C-A10EE. And now the problem this that I can't boot it without usb stick that contains windows installation files. I can boot up windows and remove the usb stick evertything is working perfectly, but if I try to boot up win without usb, it gives error "Operating system not found. Press CTRL+ALT+DEL to restart". VOLUME C: is one where windows are installed (SSD), System Reserved is the system partition that windows create automaticaly (SSD), volumes D: and F: are my hdd volumes D: is empty & F: is stored with my personal files (photos, music etc.)
How to clean up the windows containing hard drive from everything but the system files, because I upgraded my windows and not installed it to a clean hard drive. I have a lot of unneeded files. How to do it, without reinstalling windows.
From many days i was trying to make backup but i was not able to make than i found that my Master File Table it corrupt which located in System Reserved.
Than i thought of Re-Installing Windows than i Formatted System Reserved Drive & My C Drive.Now I am not even able to Install Windows.
Error Shown by the Windows Setup - Setup was unable to create a new system partition or locate an existing system partition.
I have a Windows 8.1 Update 1 ISO and would like to use it to perform a clean install on a system which supports UEFI Secure Boot but has no optical drive. What would be the best way to approach this?
WIMBoot would be nice to have as well, if there's a way to do it without making things too complicated.
While I was messing around with my laptop, I decided to add on a fourth operating system, Arch Linux. I suppose I was pushing my luck a bit . Anyways, during the installation, I accidentally deleted the EFI system partition from my laptop, which contained the Windows Boot Manager and necessary files to boot. Great. I only made things worse by trying to troubleshoot, and broke grub as well.
I have a Windows 8 repair disk I made using the Windows 8 built in utility, but it does not boot: the computer turns on, and just hangs at the Toshiba splash screen.
I also can obviously not access the Toshiba recovery partitions, as they are booted into just like Windows itself.
I found a bootx64.efi file on one of my system's recovery partitions (Toshiba seems to have some really complex system going on) and placed it in EFIootootx64.efi. According to this site, FGA: The EFI boot process., I need to place the bkpbootmgfw.efi (on my system, that was what it was called, but I suspect boot-repair (ubuntu tool) messed something up when I was first setting up grub and the ESP and the bkp stands for backup) back onto the EFI System Partition.
Where to look for in the various Windows Imaging Format .wim and .swm files I have laying around my recovery partition(s) in order to extract the necessary EFI files. Any Windows Repair iso that works.
Used to run Win 7 on our main drive, and used a second one for storage (mainly games), however something happened, making us unable to boot. So we decided to upgrade to Windows 8, which we put on our secondary drive, and that's now the main one (boots from here, is Disk 0). When I turn on the PC, it asks me whether to run on Windows 7 or 8 (8 is the default). C: contains Windows 8, D: Contains Win 7.
MAIN PROBLEM: Since we're going to use the old main drive as storage (the one with Windows 7), I wanted to format it, but it won't let me because, I suppose, of the System files still on it (System, Active). Picture of Disk Management below. How do I format it?
If I remove the boot drive from my old Windows 7 computer and put it into my new Windows 8 computer, how can I set up the new computer to allow dual boot at start-up?
I ended up managed to be able to boot into windows after i swapped out my motherboard and CPU to the new ones and everything seems to be working as it should, windows automatically installed the intel drivers and all my old programs and settings are there perfectly.
I can only boot into windows if i select my backup drive as #1 boot device in the BIOS, the SSD isnt even on the list.
The thing I don't understand lies in that, if i select my SSD as priority, where the directory of windows is installed, i get a bootmgr missing error - I've tried the various methods of recovering this using the cmd and a windows installation disc.
This isn't a huge issue but it's really tripping me out as to why this is occurring? I initially had some issues getting windows to boot so i installed a clean windows8 on this backup drive, i didnt change any settings at all. was only making sure that the SSD was being recognized and i hadn't corrupted it somehow. is it possible that the backup drive boot manager is directing it to the SSD.
For some reason, Windows 8.1. downloader package refuses to see my 8GB SanDisk flash drive as a target for creating bootable Windows 8.1 installer USB media. A 16GB Patriot drive is detected and processed properly, but 8GB SanDisk is ignored. The same is true for the Windows 7 USB/DVD tool.
What could be causing this?
When I create the media on the 16GB drive, only 3+GB is used, which means that 8GB drive should be sufficiently large.
UPDATE: It appears that the SanDisk drive is not detected as "removable", so neither Windows 8 downloader nor Windows 7 USB/DVD tool see it as a valid target. There are quite a few reports of that issue on the Net. So, how do I create a bootable Windows 8.1 install media from that SanDisk drive?
I got this msg tryng to refresh my pc . because my vaio gate app wasnt working right . so after the restar i just got the blue screen with this error the boot configutating data file dosent have valid infomation of an operating system.
I have a Dell Inspiron 7720 Win 8 x64 PC which includes UEFI (described in Microsoft link below). However, UEFI is accessed on Win 8 from Settings Charm > "Change PC Settings". This requires that you have booted the system already. In case of a main disk crash, you need to boot from another drive, like a thumb drive.
During restart my Dell PC displays "F12 Boot Options" in lower right of screen during restart, but multiple presses of F12 during startup are ignored. Likewise when I try F1 or F2 during startup. So I have no way to specify an alternate boot drive.
I am thinking maybe my PC is defective, but also maybe I'm missing something. What is UEFI? - Microsoft Windows Support
I'm trying to install windows 8.1 on a sony vaio E series laptop which had windows 8 preloaded on it. I made a bootable usb thumb drive with Windows USB CD/DVD Download tool. When i try to boot through the pdrive it doesn't boot. I selected the option to boot from external device and selected the boot mode as UEFI. But it doesnot go into the windows 8.1 setup.
Then i selected the legacy mode and started the setup but it booted into the 8.1 setup. I formatted the C: Drive and selected that partition to install windows 8.1 on it but it showed mean an error showing that the partition is of GPT style and windows cannot install. I was doomed...
it happens because it is not booted in the UEFI mode and then i tried again but it doesnot go into the windows setup and shows a black screen with the notification that no operating system was found.
I have a relatively new installation of windows 8 with just a few programs installed. Problem is my new SSD is smaller than the existing drive. Using the tutorials on this site, can I just shrink the volume of my existing HDD partition before creating the image to recover from?
I've had a home network with a Windosw7 PC, sometimes a windows 7 laptop, an Imac, and 2 Mac Powerbooks. I never did anything special to set up a network, I just connected them all to the router. I also have a network printer, a Cannon, which they all print to.
I added a new Windows 8 computer and during the set up process added the printer connection. After doing that, none of the other computers could print to the printer, they all got a "printer offline message. So I deleted it from the Windows 8 profile and it worked for the others again.
Is there a way to set up the printer for the windows 8 computer without cutting off the others?
Also, I'd like to homeshare the two windows 7 and the windows 8 computers, is there a way to do that and have networking still with the MAC computers - I'm particularly concerned with the printer. We don't really need to share files between the macs and pcs.
I've had Win 7 Pro on my laptop for over a year. I installed a 2nd hard drive to it recently and today I installed Windows 8 Pro on the 2nd hard drive. It's been a roller coaster of good & bad luck.
The first install went fine, until I tried to install the Windows 8.1 upgrade from the Windows store, then things went bad and I had to go into Windows 7 and eventually delete the Windows 8 volume and change it from MBR to GPT because of UEFI (no secure boot enabled). What a stretch of error messages telling me I can't install Windows 8 on the blank hard drive because it was or wasn't MBR or GPT, or the automagically made partitions weren't in the right order.
After spending over 7 hours twice in a row installing Windows 8, I finally find out that there's no boot option for Windows 7 anymore.
The only clue I have is to use a Windows 7 repair disk and use diskpart.exe and make the Win 7 drive "active" but that's a little foreign to me at this point.
I'm looking in Computer Management / Disk Management from within Windows 8.
Disk 0: SYSTEM D: 438 MB NTFS (lengthened from 199 MB with EaseUS because Acronis 2014 thought it too small while crashing), Healthy (Active, Primary Partition); Win 7 E: 930.98 GB NTFS Healthy (Primary Partition); HP_TOOLS F: 102 MB FAT 32 Healthy (Primary Partition)
I have just bought an AIO Asus desktop with 1 Tb of storage. The c: (Windows)drive is allocated 100gb and the d: drive 931gb. I just want to transfer all the data from my old computer. This was pretty much all in the folder c:>Users>Myname, but when I try to transfer it all into the same folder on the new computer, obviously with 100gb there is not enough space.
First, some context: I have a Dell Inspiron 15R SE that came with Windows 8.
I've managed to get a working dual-boot system with Ubuntu 12.10. I can't remember exactly how I done that, but I remember that I had to disable secure boot. I think that the boot configuration those days was:
Secure boot: DisabledLoad legacy option rom: EnabledBoot list option: Legacy
This "configuration" worked perfectly for 6-7 months.
Then, one day (last week, can't remember the exact day), when I was using Windows 8 the computer crashed. I hard-rebooted and got this screen:
After executed boot-repair from a Ubuntu LiveCD dozens of times I've decided to eliminate Ubuntu temporarily and focus to get a system with Windows 8 working nice.
Then I used my recovery DVDs to recover the system. Yup, Windows has booted. But when I restarted first time I got the same error. Then I, digging a solution, pressed F12 after a reboot and got here:
The highlighted option allows me to boot into Windows 8. So I went to boot options (F2) and changed the following configuration:
Load legacy option rom: DisabledBoot list option: UEFI
Now I can boot directly to Windows without need to press F12.
But my objective isn't complete. I want to erase all Ubuntu entries from the seconds image and restore the legacy boot from the first imagem (because they worked before).
I did two things:
I erased all partitions related to Ubuntu (root partition and home partition).I created a Windows recovery disk (not a system recovery disk).
I used the recovery disk to run the automatic recovery procedure (I forgot the exactly name). I've runned it at least 10 times with no success. Then I went to command prompt to try the famous triad: bootrec /fixmbr, bootrec /fixboot and bootrec /rebuildbcd. Still, no solution.
After creating a UEFI bootable USB thumb drive with Rufus (using Windows 8.1 Enterprise ISO x64), for a Dell Optiplex 3010 (configured as UEFI only, no CSM, latest firmware version, Windows 8 installed), I didn't see a USB boot option, so I tried to add one manually. Unfortunately I erased the existing boot option (boot manager) by mistake. Although there were two boot options for PXE booting, the machine will not start anymore, even when there is an active WDS server on the network.
I also see Led's 2 and 3 lighting up, meaning according to the manual 'hardware ok but bios possibly damaged/corrupt'.
I understand I cannot start the machine from a bios boot disk because of GPT partitioning, and the UEFI USB boot disk I made might be corrupt (as it didn't show up as a boot option), however I don't understand why it won't boot from the PXE network card, as these boot options are still there.
I just purchased an Asus R510CC notebook with windows 8 and I bought a SSD drive to replace the current one.
I used Recovery Drive in Windows to create an USB boot drive with the recovery partition on it. I then installed the SSD and booted from the USB. When I get to the option to reset my computer I encounter an error with the following message: "Unable to reset PC. A required drive partition is missing". I already did a bit of research and BIOS tweaking but I can't install Windows onto my SSD.
I have installed Blue 8.1 on a separate drive in my system along side 8.0. When I restart the 8.0 boots unless I manually select the 8.1 drive in bios. How can I alter the Boot menu to add the option to boot from either OS?
Late last Fall I bought a new Desktop, an HP H81414, with Windows 8 installed with the intention of installing Windows 7 on an SSD. I migrated Window 8 to an SSD, removed that from the system, installed new SSD and put Windows 7 on it. Both worked fine. I wound up with 2 SSD's. capable of running on the EFI BIOS machine with Secure Boot turned off. I later bought a new laptop with Windows 8. I found the Win 8 with Classic Shell to be very acceptable.
What I would like to do now ,if possible, is to mount both SSD's in the HP case and switch to either one of them at boot.
