Setup Installation :: 8.1 Pro - Can Use Former Boot Drive For Data With New SSD?

Aug 6, 2014

I am planning on building a new computer, and I want to put a 250GB SSD (Samsung 840 EVO) in it to use with 8.1 Pro. However, most of the programs and data I need are still on the old computer's boot drive, specifically all of my STEAM games (none of which I have the DVDs for.)

My question is if I can create symlinks to the old boot drive without losing data on it. This will most likely be a temporary measure, as the drive's a fairly slow 5900RPM Barracuda, and I want something faster, but I can't afford a better one just yet...

View 4 Replies


ADVERTISEMENT

Setup Installation :: Want To Add Second Sata As Data Drive?

Sep 27, 2013

I had one sata drive wanted to add second sata as data drive.i disconnected older hard drive connected new one,installed windows 8 on it,everything went fine.I did not format older drive yet,reconnected it afterwards,changed boot order in BIOS but the second sata drive reads bus number 0,one with operating system reads bus number 1.Is this O.K.?Usually bus number 0 should be the operating system is on.How can I change this?

View 9 Replies View Related

Setup Installation :: Win 8 Not Loading - Boot Configuration Data File Is Missing

Aug 31, 2013

The computer is an ACER Aspire 3. 4Gb RAM. 500Gb memory.

I've been using the computer for a month and a half more or less and everything went OK only few small problems but 2 days ago. It did not Boot.When starting the PC the following appeared:

Recovery
Your PC needs to be repaired

The boot configuration data file is missing some required information.
File:BCD
Error code: 0x000000d
You'll need to use the recovery tools on your.....

The first thing I did was creating a bootable USB with Windows 8 software, it did not work. SO i used Rufus, it worked and launched the Windows 8 installation and recovery but when I tried to recover, refresh, anything it told me the disk was locked... or anything the only thing I'm able to access is Command Prompt.

I've been trying some commands that I've seen online but no luck so far. Some commands tell me "OK, successfully something" But when reboot and I change to default the boot order and UEFI then the same error appears.

View 9 Replies View Related

Setup Installation :: Boot Configuration Data For PC Missing Or Contains Errors - Status 0xc000000f

Apr 25, 2014

I'm not sure what I did, miss be when I was installing activclient but now I have a boot error asking for the windows installation disk. Also says

File: BootBCD
Status: 0xc000000f
Info: The Boot Configuration Data for your PC is missing or contains errors

I booted in recovery mode but I can't make a system recovery drive on a USB because it says the boot files are missing. And I don't have a recovery disk because SAMSUNG ATIV 6 doesn't have a disc drive. I've been searching the web for a recovery disc download to no avail.

View 1 Replies View Related

Setup Installation :: Boot Configuration Data File Doesn't Have Valid Information Of Operating System?

Mar 15, 2013

I got this msg tryng to refresh my pc . because my vaio gate app wasnt working right . so after the restar i just got the blue screen with this error the boot configutating data file dosent have valid infomation of an operating system.

Error code 0xc000098 /BCD

View 1 Replies View Related

Setup Installation :: Building New System Using Existing SSD Boot Drive

Sep 9, 2013

I built a large desktop system a few years back and it's been upgraded with various bits and pieces including an SSD boot drive. I'm looking at putting together a much smaller system in a Shuttle XH61V and I want to use my existing 2.5" SSD. Can I just put the SSD in and clean install Win 8 from the original system builder disk I bought or will something go wrong because there's already an installation on the drive?

View 7 Replies View Related

Setup Installation :: Removing Old Windows 7 In 2nd Drive (dual Boot)

Jun 28, 2014

Windows 8, 64-bit.

Used to run Win 7 on our main drive, and used a second one for storage (mainly games), however something happened, making us unable to boot. So we decided to upgrade to Windows 8, which we put on our secondary drive, and that's now the main one (boots from here, is Disk 0). When I turn on the PC, it asks me whether to run on Windows 7 or 8 (8 is the default). C: contains Windows 8, D: Contains Win 7.

MAIN PROBLEM: Since we're going to use the old main drive as storage (the one with Windows 7), I wanted to format it, but it won't let me because, I suppose, of the System files still on it (System, Active). Picture of Disk Management below. How do I format it?

View 5 Replies View Related

Setup Installation :: Remove Boot Drive From Old Windows 7 Computer?

Sep 13, 2013

If I remove the boot drive from my old Windows 7 computer and put it into my new Windows 8 computer, how can I set up the new computer to allow dual boot at start-up?

View 1 Replies View Related

Setup Installation :: Windows 8 And XP - Dual Boot Drive Letters

Jul 6, 2013

Installed Windows 8 first, then installed Win XP to a second partition on the same disk.

In windows 8, the XP partition is seen as D:

If I boot to XP, XP sees itself as I:

it sees the windows 8 partition as C: and that is what I want, is C: being win 8 and XP being D:

Is there anyway to change the lettering on the XP partition?

View 9 Replies View Related

Dual Boot Windows 7 / 8 Without Loosing C Drive Data

Nov 11, 2012

I downloaded and directly installed windows 8 on my laptop's E drive, while I already had windows 7 on C drive, on the same HDD.

Now it directly boots to windows 8. How to dual boot windows 7 & windows 8, or any other way to use windows 7 in my laptop without losing my C drive's data.

View 3 Replies View Related

Setup Installation :: BIOS Boot Priority / Windows Loading Off Different Drive

Mar 10, 2013

Re-install windows 8 with new motherboard and CPU

I ended up managed to be able to boot into windows after i swapped out my motherboard and CPU to the new ones and everything seems to be working as it should, windows automatically installed the intel drivers and all my old programs and settings are there perfectly.

I can only boot into windows if i select my backup drive as #1 boot device in the BIOS, the SSD isnt even on the list.

The thing I don't understand lies in that, if i select my SSD as priority, where the directory of windows is installed, i get a bootmgr missing error - I've tried the various methods of recovering this using the cmd and a windows installation disc.

This isn't a huge issue but it's really tripping me out as to why this is occurring? I initially had some issues getting windows to boot so i installed a clean windows8 on this backup drive, i didnt change any settings at all. was only making sure that the SSD was being recognized and i hadn't corrupted it somehow. is it possible that the backup drive boot manager is directing it to the SSD.

View 7 Replies View Related

Setup Installation :: 8GB USB Flash Drive Not Eligible As Installer Boot Media?

Feb 28, 2014

For some reason, Windows 8.1. downloader package refuses to see my 8GB SanDisk flash drive as a target for creating bootable Windows 8.1 installer USB media. A 16GB Patriot drive is detected and processed properly, but 8GB SanDisk is ignored. The same is true for the Windows 7 USB/DVD tool.

What could be causing this?

When I create the media on the 16GB drive, only 3+GB is used, which means that 8GB drive should be sufficiently large.

UPDATE: It appears that the SanDisk drive is not detected as "removable", so neither Windows 8 downloader nor Windows 7 USB/DVD tool see it as a valid target. There are quite a few reports of that issue on the Net. So, how do I create a bootable Windows 8.1 install media from that SanDisk drive?

View 6 Replies View Related

Setup Installation :: Dell Inspiron 7720 - Unable To Change Boot Drive

Oct 20, 2013

I have a Dell Inspiron 7720 Win 8 x64 PC which includes UEFI (described in Microsoft link below). However, UEFI is accessed on Win 8 from Settings Charm > "Change PC Settings". This requires that you have booted the system already. In case of a main disk crash, you need to boot from another drive, like a thumb drive.

During restart my Dell PC displays "F12 Boot Options" in lower right of screen during restart, but multiple presses of F12 during startup are ignored. Likewise when I try F1 or F2 during startup. So I have no way to specify an alternate boot drive.

I am thinking maybe my PC is defective, but also maybe I'm missing something. What is UEFI? - Microsoft Windows Support

View 3 Replies View Related

Setup Installation :: Windows 8.1 On Sony Vaio E Series Laptop - Cannot Boot Through USB Thumb Drive?

Jan 28, 2014

I'm trying to install windows 8.1 on a sony vaio E series laptop which had windows 8 preloaded on it. I made a bootable usb thumb drive with Windows USB CD/DVD Download tool. When i try to boot through the pdrive it doesn't boot. I selected the option to boot from external device and selected the boot mode as UEFI. But it doesnot go into the windows 8.1 setup.

Then i selected the legacy mode and started the setup but it booted into the 8.1 setup. I formatted the C: Drive and selected that partition to install windows 8.1 on it but it showed mean an error showing that the partition is of GPT style and windows cannot install. I was doomed...

it happens because it is not booted in the UEFI mode and then i tried again but it doesnot go into the windows setup and shows a black screen with the notification that no operating system was found.

View 4 Replies View Related

Deleting Or Changing Drive Letter On External Data Result In Data Loss?

Dec 6, 2013

I am trying to get my external hard drives setup from a freshly rebooted installed computer. I recently placed an external hard drive with all my back up files on my computer, but this drive is not going to be my main drive. I have two others I will be using as a main hdd and a backup drive that are brand new.

So, the question is, if I were to use a utility like the Windows 8.1 disk management feature to either delete the drive letter or even change it to another one, will that mess up the external hard drive or even lose data? Because until I transfer my files to my backup disk I am afraid of losing my only copy of my files.

View 3 Replies View Related

Setup Installation :: How To Move OS To SSD Without Losing Data

Feb 20, 2013

I have brought a Dell Inspiron 17R SE. It came with a 1.5TB HDD With a rotating speed of 5400 RPM. As the day is passing the Laptop is becoming slow and slower. So I have thought to buy a Samsung 840 Pro 128GB SSD and install it along with my HDD. So my question is that is there any way to move all the files from my C: drive to that SSD and make that SSD as boot drive without losing all my files. Then my 1.5 TB HDD would be my data storing drive.

Samsung 840 Pro 128GB Specs - Solid State Drives MZ-7PD128 | Samsung Memory & Storage

View 7 Replies View Related

Setup Installation :: Data Transfer From Mac To Windows 8 Laptop

Jan 6, 2013

I want to move all my data from my MacBook to a laptop with Windows 8. I have everything backed up on an external HD; when I plug the HD into the laptop, it's not recognized. I've tried transferring via WiFi, but the MacBook is not allowing that to happen. Is there anything I can do with my backup HD so that it is recognized by my new Windows 8 laptop?

View 2 Replies View Related

Setup Installation :: How To Separate Program Files And User Data On Another HDD

Feb 11, 2013

How can I separate my Drive C User Data & Program Files to Drive D.

I was looking into Microsoft folder locations, you can check it out here: [URL] ......

I was wondering how can I apply that during a clean install.

View 7 Replies View Related

Setup Installation :: 8.1 Pro - Upgrading Without Loosing Data Or Installed Software Settings

Sep 15, 2014

I want to upgrade windows 7 Pro system to windows 8.1 pro without loosing data or installed software settings.

is there a easy/legal way to this???

View 2 Replies View Related

Setup Installation :: Upgrade Win7 To Win8 Keeping User Data And Programs On 2nd HDD

Jan 11, 2013

I want to upgrade from Windows 7 64 bit Home edition - To Windows 8 64 bit Home Edition.

I currently have my windows 7 installation on drive C (64GB SSD)

My user profiles, Data and programmes are stored on Drive E ( 1TB HDD )

If i use the windows 8 upgrade option - What will happen?.

View 8 Replies View Related

Setup Installation :: Samsung Recovery Error - Maintain User Data Option

Mar 28, 2014

So I had this recovery error that said my winload.efi was missing so I ran the recovery from boot up and decided to recover. I read that this will delete the files from C: so I turned on the "Maintain User Data" option and selected all including the local disk c from advanced selection. But when the process was finished, my laptop was empty and no data was restored. What happened ? did I just misunderstand how it works and now it's gone ? or is it just somewhere I can't find ?

View 2 Replies View Related

Setup Installation :: GPT Win 8 Dual Boot Installation Killed Win 7 MBR Boot Opt

Feb 2, 2014

I've had Win 7 Pro on my laptop for over a year. I installed a 2nd hard drive to it recently and today I installed Windows 8 Pro on the 2nd hard drive. It's been a roller coaster of good & bad luck.

The first install went fine, until I tried to install the Windows 8.1 upgrade from the Windows store, then things went bad and I had to go into Windows 7 and eventually delete the Windows 8 volume and change it from MBR to GPT because of UEFI (no secure boot enabled). What a stretch of error messages telling me I can't install Windows 8 on the blank hard drive because it was or wasn't MBR or GPT, or the automagically made partitions weren't in the right order.

After spending over 7 hours twice in a row installing Windows 8, I finally find out that there's no boot option for Windows 7 anymore.

The only clue I have is to use a Windows 7 repair disk and use diskpart.exe and make the Win 7 drive "active" but that's a little foreign to me at this point.

I'm looking in Computer Management / Disk Management from within Windows 8.

Disk 0: SYSTEM D: 438 MB NTFS (lengthened from 199 MB with EaseUS because Acronis 2014 thought it too small while crashing), Healthy (Active, Primary Partition); Win 7 E: 930.98 GB NTFS Healthy (Primary Partition); HP_TOOLS F: 102 MB FAT 32 Healthy (Primary Partition)

Disk 1: 300 MB Healthy (Recovery Partition) {no letter}; 100 MB Healthy (EFI System Partition) {no letter}; C: 931.00 GB NTFS Healthy (Boot, Page File, Crash Dump, Primary Partition)

And several other external disks which don't deserve mention today.

View 1 Replies View Related

Setup Installation :: New Computer - C Drive Too Small / D Drive Wrong Place?

Aug 13, 2014

I have just bought an AIO Asus desktop with 1 Tb of storage. The c: (Windows)drive is allocated 100gb and the d: drive 931gb. I just want to transfer all the data from my old computer. This was pretty much all in the folder c:>Users>Myname, but when I try to transfer it all into the same folder on the new computer, obviously with 100gb there is not enough space.

View 2 Replies View Related

Setup Installation :: Recover Legacy Boot And Remove Old Entries From UEFI Boot

Aug 21, 2013

First, some context: I have a Dell Inspiron 15R SE that came with Windows 8.

I've managed to get a working dual-boot system with Ubuntu 12.10. I can't remember exactly how I done that, but I remember that I had to disable secure boot. I think that the boot configuration those days was:

Secure boot: DisabledLoad legacy option rom: EnabledBoot list option: Legacy

This "configuration" worked perfectly for 6-7 months.

Then, one day (last week, can't remember the exact day), when I was using Windows 8 the computer crashed. I hard-rebooted and got this screen:

After executed boot-repair from a Ubuntu LiveCD dozens of times I've decided to eliminate Ubuntu temporarily and focus to get a system with Windows 8 working nice.

Then I used my recovery DVDs to recover the system. Yup, Windows has booted. But when I restarted first time I got the same error. Then I, digging a solution, pressed F12 after a reboot and got here:

The highlighted option allows me to boot into Windows 8. So I went to boot options (F2) and changed the following configuration:

Load legacy option rom: DisabledBoot list option: UEFI

Now I can boot directly to Windows without need to press F12.

But my objective isn't complete. I want to erase all Ubuntu entries from the seconds image and restore the legacy boot from the first imagem (because they worked before).

I did two things:

I erased all partitions related to Ubuntu (root partition and home partition).I created a Windows recovery disk (not a system recovery disk).

I used the recovery disk to run the automatic recovery procedure (I forgot the exactly name). I've runned it at least 10 times with no success. Then I went to command prompt to try the famous triad: bootrec /fixmbr, bootrec /fixboot and bootrec /rebuildbcd. Still, no solution.

View 2 Replies View Related

Setup Installation :: Windows Boot Manager - Deleted UEFI Boot Option?

Mar 24, 2014

After creating a UEFI bootable USB thumb drive with Rufus (using Windows 8.1 Enterprise ISO x64), for a Dell Optiplex 3010 (configured as UEFI only, no CSM, latest firmware version, Windows 8 installed), I didn't see a USB boot option, so I tried to add one manually. Unfortunately I erased the existing boot option (boot manager) by mistake. Although there were two boot options for PXE booting, the machine will not start anymore, even when there is an active WDS server on the network.

I also see Led's 2 and 3 lighting up, meaning according to the manual 'hardware ok but bios possibly damaged/corrupt'.

I understand I cannot start the machine from a bios boot disk because of GPT partitioning, and the UEFI USB boot disk I made might be corrupt (as it didn't show up as a boot option), however I don't understand why it won't boot from the PXE network card, as these boot options are still there.

View 4 Replies View Related

Setup Installation :: Resetting PC On New SSD Drive Using Recovery Drive

Jul 16, 2014

I just purchased an Asus R510CC notebook with windows 8 and I bought a SSD drive to replace the current one.

I used Recovery Drive in Windows to create an USB boot drive with the recovery partition on it. I then installed the SSD and booted from the USB. When I get to the option to reset my computer I encounter an error with the following message: "Unable to reset PC. A required drive partition is missing". I already did a bit of research and BIOS tweaking but I can't install Windows onto my SSD.

View 9 Replies View Related

Setup Installation :: Add Boot Menu At Start For Blue Dual Boot

Jun 28, 2013

I have installed Blue 8.1 on a separate drive in my system along side 8.0. When I restart the 8.0 boots unless I manually select the 8.1 drive in bios. How can I alter the Boot menu to add the option to boot from either OS?

View 3 Replies View Related

Setup Installation :: Artificial Dual Boot - Mount Both SSDs In HP Case And Switch To Either One At Boot?

Feb 18, 2013

Late last Fall I bought a new Desktop, an HP H81414, with Windows 8 installed with the intention of installing Windows 7 on an SSD. I migrated Window 8 to an SSD, removed that from the system, installed new SSD and put Windows 7 on it. Both worked fine. I wound up with 2 SSD's. capable of running on the EFI BIOS machine with Secure Boot turned off. I later bought a new laptop with Windows 8. I found the Win 8 with Classic Shell to be very acceptable.

What I would like to do now ,if possible, is to mount both SSD's in the HP case and switch to either one of them at boot.

View 3 Replies View Related

Hardware Drivers :: Main Drive And Data Drive SATA Connectors?

Jul 1, 2014

When I go to Computer Management my main (OS) drive shows as "Disk 1" and my 2nd internal data drive shows as "Disk 0". Should I switch the SATA cables so that the main drive will show as "Disk 0 and the 2nd internal drive as "Disk 1"?

View 5 Replies View Related

Setup Installation :: Dual Boot - Removed Old HD Now No Boot At All

Apr 28, 2014

I had windows 7 running on my computer. When windows 8 came out I used a second harddrive as the windows 8 installation drive. Windows 8 automatically setup a dual boot system where every time I started the computer it took me a windows screen where I could select either windows 7 or windows 8. This has been going on since Windows 8 was released.

I decided it was getting old so I decided it was time to remove the old windows 7 harddrive. I tried doing it inside the windows 8 dual boot screen but could not find an option. So I decided to reformat the windows 7 harddrive. I did this in command prompt mode. After doing so when my computer restarted it said it could not find any harddrive to boot. Windows 8 is installed on the other harddrive, the one that was not reformatted. So how do I get it to start using that harddrive as the boot drive? I checked my bios and even physically disconnected the old HD that had windows 7 on it, but none of that seemed to work even though the Windows 8 HD is definitely in the boot order in the bios.

View 5 Replies View Related

Setup Installation :: Windows 8 Core Installation Won't Recognize Hard Drive

Sep 15, 2014

I have a HP Envy 4 Ultrabook and I want to install Windows 8 from scratch, I put the installation files on a flash drive from a DVD of Win 8 I had, but when I go to install it, it says the "We couldn't find any drives". I have tried using DiskPart within the CMD as well, but it only finds my flash drive when I run list disk. Also, my drives are completely formatted, and I accidentally wiped the recovery partition. I tried with a USB of Win 8 Pro, and it was fine, showing all of my drives correctly, but that version is linked to another PC, so I can't install it. Also, I booted into a Linux Mint live CD and tried to install it, it sees my hard drive correctly, but the Windows install does not, I can't figure this out, never encountered it before. Is Linux my only option at this point?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved