I want to move all my data from my MacBook to a laptop with Windows 8. I have everything backed up on an external HD; when I plug the HD into the laptop, it's not recognized. I've tried transferring via WiFi, but the MacBook is not allowing that to happen. Is there anything I can do with my backup HD so that it is recognized by my new Windows 8 laptop?
View 2 RepliesMy laptop is being replaced as it has a faulty motherboard (but still works). The new laptop will be identical.
Is there any way I can clone my hdd so that when the replacement arrives I can copy all the data onto that hdd without having to reinstall all my programs etc.
I know there are various cloning softwares available, but do they work? Are they any good? and most importantly are they idiot proof??
Any best way to achieve this data transfer to new machine.
I bought a laptop, specifically the Samsung QX410-J01. The Laptop came pre-installed with Windows 7, and I upgraded to Windows 8 on 10/26/2012. I bought the Windows 8 Pro product key, downloaded, and upgraded to Windows 8.
Just last week my laptops Motherboard failed and my computer would no longer start up. The HDD works just fine though so all my files are safe. I decided I wanted to build my own PC and I am simply waiting on my case to arrive.
My question is I want to use Windows 8 on my new PC. The problem I am facing is I do not know how I am going to install Windows on my new machine. I do not want to purchase a new install disk and license since I have already paid for the OS. I can only think of two options and I am not sure if either of them are right.
1. Plug in my laptops hard drive into the new desktop. Run Windows 8.1 on that and use the new Terabyte hard drive I bought as a second hard drive.
2. Somehow put Windows 8.1 on a flash drive and install it from the flash drive onto the new blank hard drive. Then use the product key that I had purchased to activate the OS onto the new hard drive!
I really do not want to have to purchase Windows again, but if I must I guess I will. I believe there has to be a way I doubt after being a loyal Microsoft customer, switching to Windows Phone recently, and buying an Xbox One, that Microsoft will just say "Too bad, buy it again".
I have an old HP laptop with W8.1 x64 which I have to replace. How can I transfer data to my new Asus (W8.1 x64 too) which has a very different hardware layout ?
I thought of retrieving the old "file history" on to the new rig but I'm afraid it would copy files that would make it unstable to to the hardware differences.
I recently bought a new Windows 8.1 computer to replace my old 8.1 laptop. I was going to use Windows Easy Transfer to transfer all my settings and files, but I accidentally (on my old computer) clicked "This is my new computer" and I cannot change it to old.
View 3 Replies View RelatedI have a Toshiba Qosmio X870-BT3G23 and it has 2 1TB HDDs in it. I just purchased a SSD and want to use that drive as primary with OS installed. Is this possible and how would I go about doing it? My computer came pre-installed with Windows 8 64bit.
View 9 Replies View RelatedMy Windows 8.1 installation started developing some problems including malware. So I decided to reinstall Windows, but in order to make it without a hurry, I used a separate disk. This way I could use the old installation for everyday work until the new installation was ready for the switchover. But, I didn't have a spare SATA hard disk to start with, so I decided to use an old IDE hard disk.
My motherboard Asus P8H61 doesn't have an onboard IDE controller, so I used a Logilink IDE/SATA PCI-E card (JMicron JMB36X chipset) to connect the disk. I then managed to transfer some data to other places and freed a spare 500GB SATA disk so I could clone the installation since the old IDE disk was only 120GB. I used Acronis True Image 2014 and did an "As is" clone to make sure that the transfer would be successful and bootable. I would later extend the partition to take all the available space. So far so good.
The problem is that the disk works only connected on the Logilink card (JMicron JMB36X controller) and not when connected onboard (Intel controller). I attempted to repair Windows startup using the DVD-ROM but didn't manage to start Windows successfully, unless I connect the disk on the card. I wouldn't mind too much about it, but the card sometimes blocks when there are too many programs open increasing disk access freezing the system and I have to reset the computer. Not really convenient.
So what can I do to make the installation usable on the onboard Intel controller? Is there any workaround? Of course I would like to avoid reinstalling everything and waste a week's effort!
I was wondering if there is a way to transfer a 32-bit Windows 8 Pro Upgrade license to a bootcamp partition in a 2012 Mac Mini without having to buy a new one. I bought Windows 8 for my laptop and the laptop will no longer be used. So is there a way I could maybe deactivate the license on my laptop, and reuse the same license on the Mac Mini?
View 7 Replies View RelatedI am currently using windows7 in a 1 tb harddrive. I have another internal harddrive that im not using that has windows 8 on it but is only 150gb. How do i bring windows 8 to the 1tb harddrive i am using to replace windows 7?
View 6 Replies View RelatedI just bought SSD. Is there anyway to transfer the OS from the HDD to the SSD without being needed to reinstall the windows back? The HDD that I install my windows has 3 partition , C (where window were install), E and F in it. It is possible to keep the other 2 partition (E and F)? And I found this tutorial while searching for it but it is wrote nearly 2 years ago, it is still valid to be use? SSD - Install and transfer the Operating System - Windows 7 Forums
View 5 Replies View RelatedI bought a program that will transfer data from my old computer (Vista) to my new computer (Windows 8) I plugged them both in. I had the screen on the Vista computer and it seemed to be working in transferring my stuff. I wanted until the lights on the new computer stopped blinking. Then I disconnected the Vista computer and hooked up all my wires from the Vista onto the Windows 8 computer. I can't find any of the data I supposedly transferred. Where would it be?
So now I think I better do the transfer thing again. So I take the old computer and plug it in (without monitor as I only have 1) No power. It's plugged in but the old computer won't go on. Now, I'm panicking... all my data, documents, spread sheets, genealogy are all in the old computer.
Now I do have backups... portable disks.... I see the info (or some of it) on the backup disks but how do I transfer it onto the Windows 8 computer? Theses were backedup from the old Vista computer.
On my new Asus PC I am trying to transfer Docs, Contacts, Pictures, & Music from a flash drive to the Library in File Explorer. I 'Copy' e.g. Documents from the flash drive, & when I right click in the Library on Documents, the box that opens does not show a 'Paste'. I tried to drag the items across but that won't work either. I do not have the same problem on my other notebook.
View 4 Replies View RelatedOn the same computer. microsoft's shitty "online syncing" they managed to trick me into putting my actual name for the directory in C:/users etc. I want to change this, but apparently the only way is to create a completely new account on my computer. How can I create a duplicate with all the same settings?
View 1 Replies View RelatedMy laptop shows a usb data transfer rate as low as 5MB/s. What can I do to increase it?
View 2 Replies View RelatedI'll try and keep this as short and concise: I've got Windows 8 on a new Toshiba Satellite S855. I didn't create a guest acct. after I got it back in March - as I remember, it seems like I had some issues creating it because of the stupid Msoft forcing me to join/create and acct. for their new setup or something. Anyways, so I just skipped it and been using the desktop on my admin acct. to do all my net browsing, email, etc. I put my wimpy little music collection and some movies on it from my last lapT, and then last week I bought and downloaded Elder Scrolls V: Skyrim from Gamestop/Bethesda/Steam and installed it.
I've been playing catch up reading up on all the different things to do to make a more secure computer other than just letting MS essentials or AVG (on my last lapT) alone to do the work. I've got CCleaner and Malwarebytes on all the computers in the house and running MS essentials on my 8 & my old vista as well as my roomies running 7, but I'm not sure what all else I should install. Mainly though, I just want to know how to transfer things (For Dummies as I'm totally not very tech savvy) from an Admin acct. over to the Guest acct. on the same computer. I was thinking I'm sure there's some way to log into the guest, and then run admin in it and then transfer it over, but I haven't figured out how it's done yet.
I have brought a Dell Inspiron 17R SE. It came with a 1.5TB HDD With a rotating speed of 5400 RPM. As the day is passing the Laptop is becoming slow and slower. So I have thought to buy a Samsung 840 Pro 128GB SSD and install it along with my HDD. So my question is that is there any way to move all the files from my C: drive to that SSD and make that SSD as boot drive without losing all my files. Then my 1.5 TB HDD would be my data storing drive.
Samsung 840 Pro 128GB Specs - Solid State Drives MZ-7PD128 | Samsung Memory & Storage
I had one sata drive wanted to add second sata as data drive.i disconnected older hard drive connected new one,installed windows 8 on it,everything went fine.I did not format older drive yet,reconnected it afterwards,changed boot order in BIOS but the second sata drive reads bus number 0,one with operating system reads bus number 1.Is this O.K.?Usually bus number 0 should be the operating system is on.How can I change this?
View 9 Replies View RelatedI am planning on building a new computer, and I want to put a 250GB SSD (Samsung 840 EVO) in it to use with 8.1 Pro. However, most of the programs and data I need are still on the old computer's boot drive, specifically all of my STEAM games (none of which I have the DVDs for.)
My question is if I can create symlinks to the old boot drive without losing data on it. This will most likely be a temporary measure, as the drive's a fairly slow 5900RPM Barracuda, and I want something faster, but I can't afford a better one just yet...
I was wondering is there any way to increase the data transfer rate on SATA drives. My MB has SATA 3 and I have a Samsung HD 154UI drive on SATA /300 where I have Windows 8 x64 installed. The performance under Windows is 5.9. This is the lowest on the list. CPU 7.4, Memory 7.4, Graphics 7.9, Gaming graphics 7.9, Hard disk 5.9...Is there a way to get it higher without replacing the drive. The drive is new (only 3 months old) I have two of these drives and two Seagate drives that are 2 tera which are 1 year old.
View 9 Replies View RelatedThe computer I am using is a Dell Inspiron M5040 laptop.
I got a Samsung 840 Pro Series SSD to replace my HDD, and used the Samsung Software that came with it to image my OS over to the SSD. It had an error at first, so I removed my antivirus program and ran it again, and it worked.
Everything works pretty much the same, except for noticeable differences in search and Internet webpage access.
If I search in Explorer, the searches are fast and prompt. But if I search with the regular search charm ( WIN+S ), searches are more than 7x slower than on the previous HDD. Also, webpages a quick to load on different computers (not the internet speed, in other words). But this computer had slow loads, and now the loading is even slower on the new SSD.
Things I've tried:
Multiple SFC scans - all say there is some files that could not be fixed All windows updates installed enabled Trimm, updated SSD firmware, ran Windows SSD optimization, optimized computer for SSD use Reset Internet Explorer Rebuilt index
I'm thinking of ditching this slower laptop in favor of something... anything nearby. Regretting either imaging to another drive, or using Samsung to do it.
I recently bought a usb 3.0 pendrive expecting it to be faster, but it gives me similar data transfer speeds(5-6mbps) while using it on usb 3.0 (superspeed ports)or usb 2.0 ports..... I have installed renesas electronics usb 3.0 driver....and using win8 as operating system..
Do I expect similar speeds from usb 2.0 as well as usb 3.0 ports or can it be enhanced in any way??
Also any link for compatible 3.0 driver or bios upgrade.
How I could go about doing this. Last year I bought a Windows 8 Pro upgrade disc we used to upgrade our machines from Windows 7 home Premium to 8 Pro. Is it possible for me to use that same upgrade product key for Windows 8 Pro on 8.1 so I could have a Pro version of 8.1? The computer I originally did the upgrade on I am no longer using and is there a way to deactivate the license on that one so it could be used on the new computer I bought? Also I just want the extra's of the Pro version so does it matter it is the license for Windows 8 even though the new computer uses 8.1?
View 9 Replies View RelatedHow can I separate my Drive C User Data & Program Files to Drive D.
I was looking into Microsoft folder locations, you can check it out here: [URL] ......
I was wondering how can I apply that during a clean install.
The computer is an ACER Aspire 3. 4Gb RAM. 500Gb memory.
I've been using the computer for a month and a half more or less and everything went OK only few small problems but 2 days ago. It did not Boot.When starting the PC the following appeared:
Recovery
Your PC needs to be repaired
The boot configuration data file is missing some required information.
File:BCD
Error code: 0x000000d
You'll need to use the recovery tools on your.....
The first thing I did was creating a bootable USB with Windows 8 software, it did not work. SO i used Rufus, it worked and launched the Windows 8 installation and recovery but when I tried to recover, refresh, anything it told me the disk was locked... or anything the only thing I'm able to access is Command Prompt.
I've been trying some commands that I've seen online but no luck so far. Some commands tell me "OK, successfully something" But when reboot and I change to default the boot order and UEFI then the same error appears.
I want to upgrade windows 7 Pro system to windows 8.1 pro without loosing data or installed software settings.
is there a easy/legal way to this???
I want to upgrade from Windows 7 64 bit Home edition - To Windows 8 64 bit Home Edition.
I currently have my windows 7 installation on drive C (64GB SSD)
My user profiles, Data and programmes are stored on Drive E ( 1TB HDD )
If i use the windows 8 upgrade option - What will happen?.
So I had this recovery error that said my winload.efi was missing so I ran the recovery from boot up and decided to recover. I read that this will delete the files from C: so I turned on the "Maintain User Data" option and selected all including the local disk c from advanced selection. But when the process was finished, my laptop was empty and no data was restored. What happened ? did I just misunderstand how it works and now it's gone ? or is it just somewhere I can't find ?
View 2 Replies View RelatedI'm not sure what I did, miss be when I was installing activclient but now I have a boot error asking for the windows installation disk. Also says
File: BootBCD
Status: 0xc000000f
Info: The Boot Configuration Data for your PC is missing or contains errors
I booted in recovery mode but I can't make a system recovery drive on a USB because it says the boot files are missing. And I don't have a recovery disk because SAMSUNG ATIV 6 doesn't have a disc drive. I've been searching the web for a recovery disc download to no avail.
I got this msg tryng to refresh my pc . because my vaio gate app wasnt working right . so after the restar i just got the blue screen with this error the boot configutating data file dosent have valid infomation of an operating system.
Error code 0xc000098 /BCD
I was working on a windows 8 laptop and wanted to transfer user files to the new laptop. I pulled the drive from the Windows 8 laptop, plugged it into an open sata port on my windows 7 bench machine (which already contained the files to be transferred) and booted without problem. I assigned the windows 8 drive a letter and opened the drive. All the files of the Windows 8 drive were visible. I opened a directory off of the root, created a new directory and copied the files. No problem. I opened some of the image files and all looked well. I shut down the win7 box, pulled the Windows 8 drive and put it back in the laptop and it booted, no problem.
When I went looking for the files, they were no where to be found! Win 8 showed the "used space" as if the copy never happened. Thinking I made an error on the copy I shut down the Windows 8 laptop and pulled the drive, plugged it back into the win7 box and booted. The win7 boot detected "file corruption" on the volume in question and did some "orphan" recovering and a bunch of other stuff. When it finally finished and booted all the files copied were in a "found.000" directory. I took ownership and repeated. Funny thing is that while the win7 showed the drive with the expected 40gb of data taking up space, the windows 8 showed the "used space" as if the data wasnt even there? why as I try to copy the files from the win7 drive converted to a usb external directly into the Windows 8 laptop.
i have a newish samsung laptop that came preinstalled with windows 8 but i need to format the stock hard drive and i was wondering how i would reinstall full windows 8 without a product key.
View 9 Replies View Related