Setup Installation :: HDD To SSD Transfer Make Computer Slow - Dell Inspiron M5040
Feb 13, 2014
The computer I am using is a Dell Inspiron M5040 laptop.
I got a Samsung 840 Pro Series SSD to replace my HDD, and used the Samsung Software that came with it to image my OS over to the SSD. It had an error at first, so I removed my antivirus program and ran it again, and it worked.
Everything works pretty much the same, except for noticeable differences in search and Internet webpage access.
If I search in Explorer, the searches are fast and prompt. But if I search with the regular search charm ( WIN+S ), searches are more than 7x slower than on the previous HDD. Also, webpages a quick to load on different computers (not the internet speed, in other words). But this computer had slow loads, and now the loading is even slower on the new SSD.
Things I've tried:
Multiple SFC scans - all say there is some files that could not be fixed All windows updates installed enabled Trimm, updated SSD firmware, ran Windows SSD optimization, optimized computer for SSD use Reset Internet Explorer Rebuilt index
I'm thinking of ditching this slower laptop in favor of something... anything nearby. Regretting either imaging to another drive, or using Samsung to do it.
View 9 Replies
ADVERTISEMENT
Dec 31, 2012
I have been trying (without success) to transfer my e-mail folder files from my old computer (Dell Inspiron 530 using Vista) to my new computer (Sony Vaio using Windows 8). The transfer is from Windows Mail to Windows Live Mail.
The recommended method on the old machine using a flash drive is as follows: File-Export-Messages-Microsoft Windows Mail-Select Folder (K:New Folder)-Next-Select Folders-Next.
At this point the folders should transfer to the flash drive. Unfortunately I keep getting and error message that says that "Export did complete successfully and Windows Mail was unable to export all messages" - (in fact only a few messages were transferred) The message then goes onto say that " your disk may not have enough space (it is a 32GB flash drive and has more than enough space!) or that some messages may be corrupted. Run disk clean-up or delete some files and try again". I have done this without improvement.
Another approach that was recommended was to find all of the e-mail files (.eml files) and copy them to the new computer via the flash drive. I can copy them to the flash drive without problem but am not sure how/where to import them into the C: drive of the new computer.
View 6 Replies
View Related
Jul 30, 2013
I recently purchased a Dell Inspiron 17R SE.
The first thing I wanted to do to it was transfer the OS to an SSD, and use the 1TB drive that came with the computer as a data drive.
I wanted to shrink the C: OS partition so it would fit on my SSD but the Windows Shrink Partition tool wouldn't let me due to unmovable files.
I tried using the Windows 7 File Recovery backup tool to do a backup. With over 500 GB space on my backup drive and only 65 GB used on the 1Tb drive I was backing up, it kept telling me not enough disk space. Eventually I gave up.
I opted to install EaseUS TODO Backup and tried to backup the the whole 1TB drive. It raised an error indicating too many unnamed partitions. I opted to backup only the C: OS and the EFI System partition - leaving 3 oem hidden partitions not backed up as I wasn't going to do anything to them anyway. It worked.
I used EaseUS Partition Master to shrink the C: OS partition to 120 GB. Worked again.
I thought now would be the time to generate the Windows backup - created an image OK. Afterward however, it failed to generate the system recovery disk indicating some invalid parameter error. This was concerning. I went to the Dell Backup and Recovery tool and it told me it couldn't find the recovery partition. Not good again.
In disk management, all partitions are still there. I'm pretty sure the 3 OEM hidden partitions (40Mb, 500Mb, and 14.73Gb) had names in brackets like 'Healthy (Recovery Partition)', ... They all just say 'Healthy (OEM Partition)'. I'm guessing EaseUS Partition Master messed up their names and/or messed with their content.
At this point, the computer still works fine, and on the second pass I was able to backup the entire drive using EaseUS TODO Backup. I can't use the Dell or Windows backup utilities. I'm not sure what mess I created by messing up the 3 oem partitions, or if I can recover somehow.
View 3 Replies
View Related
Nov 25, 2013
I have a Dell Inspiron 7720. I have created an uefi bootable usn flash disk with rufus 1.4b
I'm trying to boot from it so i can create a Windows 8.1 uefi installation and the problem is that the usb flash disk wont boot.
I have secure boot enabled and legacy option rom disabled.
View 7 Replies
View Related
Jul 9, 2014
I bought a laptop, specifically the Samsung QX410-J01. The Laptop came pre-installed with Windows 7, and I upgraded to Windows 8 on 10/26/2012. I bought the Windows 8 Pro product key, downloaded, and upgraded to Windows 8.
Just last week my laptops Motherboard failed and my computer would no longer start up. The HDD works just fine though so all my files are safe. I decided I wanted to build my own PC and I am simply waiting on my case to arrive.
My question is I want to use Windows 8 on my new PC. The problem I am facing is I do not know how I am going to install Windows on my new machine. I do not want to purchase a new install disk and license since I have already paid for the OS. I can only think of two options and I am not sure if either of them are right.
1. Plug in my laptops hard drive into the new desktop. Run Windows 8.1 on that and use the new Terabyte hard drive I bought as a second hard drive.
2. Somehow put Windows 8.1 on a flash drive and install it from the flash drive onto the new blank hard drive. Then use the product key that I had purchased to activate the OS onto the new hard drive!
I really do not want to have to purchase Windows again, but if I must I guess I will. I believe there has to be a way I doubt after being a loyal Microsoft customer, switching to Windows Phone recently, and buying an Xbox One, that Microsoft will just say "Too bad, buy it again".
View 9 Replies
View Related
Apr 4, 2013
I recently bought a usb 3.0 pendrive expecting it to be faster, but it gives me similar data transfer speeds(5-6mbps) while using it on usb 3.0 (superspeed ports)or usb 2.0 ports..... I have installed renesas electronics usb 3.0 driver....and using win8 as operating system..
Do I expect similar speeds from usb 2.0 as well as usb 3.0 ports or can it be enhanced in any way??
Also any link for compatible 3.0 driver or bios upgrade.
View 2 Replies
View Related
Mar 21, 2014
I have bought a Dell Inspiron 15R which arrived this week. I have already decided that I am going to install my own copy of Windows 8.1 Professional on to my system.
I have tried this several times now and I keep failing. I am booting from my DVD and the install goes fine. However during install I am normally prompted to enter my Serial for 8.1 and it does not do this. It progresses as though everything is ok, I can format the Hard drive and then it proceeds to install Windows 8.1.
Once fully installed I then go to see if it is activated and to my surprise it is. It has activated with the same Serial as the OEM that came with the laptop.
I have also noticed that this copy of 8.1 cannot join the laptop to my own domain (the options to do this are greyed out) which I am also wanting to do. So this copy of 8.1 is not the copy I am trying to install.
How can I install my own copy of 8.1. I think this is something to do with Dells bios configuration but not sure where to start.
View 9 Replies
View Related
Jan 19, 2013
I have a Core i5 Dell Inspiron N5110 with 4 GB Ram.I tried Clean Installation of Windows 8 64 Bit (Downloaded From Microsoft Dreamspark Account) with bootable USB many times about every possible management of partitions but it goes black after the installation ,where it says "Getting Device Ready @ 62% Or 60%" , & Restarts Automatically an then it says Repairing Drive E or F, O.o even i have only one partiton of 500 GB
View 6 Replies
View Related
Oct 18, 2013
I have 2.5 years old Dell Inspiron 15r n5010 with Intel Core i3 processor (M370 @2.4 GHz) and 3gb RAM. Right now I have Windows 7 (64 bit) installed on my machine. I have two questions:
1. Can I install Windows 8.1 (64bit) on my machine?
2. There is no driver available for Windows 8 for this series of laptop on Dell's site. In that case, can I use Video, Wireless LAN, Bluetooth drivers of Windows 7 (64 bit) for Windows 8.1 (64 bit)?
P.S.: Dell provide drivers for Windows 8 for Inspiron 15r n5110 series of laptop. Can I use n5110 series of drivers on my n5010 series of laptop?
View 2 Replies
View Related
Aug 19, 2013
I have been given a dell inspiron 531 with 64 bit AMD processor, running 32 bit vista home basic, that has responded well to RAM upgrade to 4GB.
I want to install 64 bit win 8 pro media centre which I have on an original MS CD. either over current vista or on separate partition as dual boot.
For some reason the dell wont read the MS win 8 64 disk (or any other original MS OS disks I have (vista-32/7-64/8-32)) but reads pretty much everything else (DVD's excepted as currently has no DVD reading software.)..either through explorer or during boot..it is not only original ms discs that are a problem as dell won't read Windows 8-64 enterprise trial iso I burned myself either.
I have tried turning off security software (MS security essentials/MS firewall)..no change.
CD's all read fine via explorer on my lightly hopped up HP tx1340ea running win 8-64 pro media centre.
View 2 Replies
View Related
Oct 20, 2013
I have a Dell Inspiron 7720 Win 8 x64 PC which includes UEFI (described in Microsoft link below). However, UEFI is accessed on Win 8 from Settings Charm > "Change PC Settings". This requires that you have booted the system already. In case of a main disk crash, you need to boot from another drive, like a thumb drive.
During restart my Dell PC displays "F12 Boot Options" in lower right of screen during restart, but multiple presses of F12 during startup are ignored. Likewise when I try F1 or F2 during startup. So I have no way to specify an alternate boot drive.
I am thinking maybe my PC is defective, but also maybe I'm missing something. What is UEFI? - Microsoft Windows Support
View 3 Replies
View Related
Feb 27, 2014
trying to reset to factory settings my Dell Inspiron 660s that uses Windows 8. Some how my ex had downloaded a interface to make Windows 8 look like windows 7. It has virus on it that I just want to reset it. I have tried to reset thru going thru change pc settings-to general-to recovery. It gives me an error code of 800....???. So I restart it, hit F12 brings up a boot window where my options are Boot Manger (clicking on this takes me back to my desktop) Boot Setup is the 2nd options, then Diagnostics (which I have run and says nothing is wrong then takes me to my desktop) then I forget what the last option is.
View 7 Replies
View Related
Aug 5, 2014
My laptop (Dell Inspiron 2013 64-bit) was playing up today and instead of restarting it, I foolishly clicked on the option to "refresh the pc". i know this would remove all my current programs. I decided then to do a System Restore. Now, all my programs are back, however, the majority of my programs such Firefox, Microsoft Office and such will not even open! I would just like to know if there is anyway to get these programs running again without having to reinstall them all? Furthermore, would I need to reset or refresh my pc as I can not uninstall old programs via Control Panel?
View 1 Replies
View Related
Jul 4, 2014
I recently bought a new Windows 8.1 computer to replace my old 8.1 laptop. I was going to use Windows Easy Transfer to transfer all my settings and files, but I accidentally (on my old computer) clicked "This is my new computer" and I cannot change it to old.
View 3 Replies
View Related
Feb 14, 2014
How I could go about doing this. Last year I bought a Windows 8 Pro upgrade disc we used to upgrade our machines from Windows 7 home Premium to 8 Pro. Is it possible for me to use that same upgrade product key for Windows 8 Pro on 8.1 so I could have a Pro version of 8.1? The computer I originally did the upgrade on I am no longer using and is there a way to deactivate the license on that one so it could be used on the new computer I bought? Also I just want the extra's of the Pro version so does it matter it is the license for Windows 8 even though the new computer uses 8.1?
View 9 Replies
View Related
Nov 9, 2012
I just bought a DELL Inspiron 17R laptop with Windows 8 and additionally the Microsoft Office 2010 Home and Student software.
how I can install the Office software and enter the license key code?
I've looked on the Start screen and cannot see any 'tiles' that are relevant, switched to the desktop and there are no icons and no Start button.
View 4 Replies
View Related
Feb 8, 2013
I just bought SSD. Is there anyway to transfer the OS from the HDD to the SSD without being needed to reinstall the windows back? The HDD that I install my windows has 3 partition , C (where window were install), E and F in it. It is possible to keep the other 2 partition (E and F)? And I found this tutorial while searching for it but it is wrote nearly 2 years ago, it is still valid to be use? SSD - Install and transfer the Operating System - Windows 7 Forums
View 5 Replies
View Related
Feb 25, 2014
I have a Toshiba Qosmio X870-BT3G23 and it has 2 1TB HDDs in it. I just purchased a SSD and want to use that drive as primary with OS installed. Is this possible and how would I go about doing it? My computer came pre-installed with Windows 8 64bit.
View 9 Replies
View Related
Apr 23, 2014
My Windows 8.1 installation started developing some problems including malware. So I decided to reinstall Windows, but in order to make it without a hurry, I used a separate disk. This way I could use the old installation for everyday work until the new installation was ready for the switchover. But, I didn't have a spare SATA hard disk to start with, so I decided to use an old IDE hard disk.
My motherboard Asus P8H61 doesn't have an onboard IDE controller, so I used a Logilink IDE/SATA PCI-E card (JMicron JMB36X chipset) to connect the disk. I then managed to transfer some data to other places and freed a spare 500GB SATA disk so I could clone the installation since the old IDE disk was only 120GB. I used Acronis True Image 2014 and did an "As is" clone to make sure that the transfer would be successful and bootable. I would later extend the partition to take all the available space. So far so good.
The problem is that the disk works only connected on the Logilink card (JMicron JMB36X controller) and not when connected onboard (Intel controller). I attempted to repair Windows startup using the DVD-ROM but didn't manage to start Windows successfully, unless I connect the disk on the card. I wouldn't mind too much about it, but the card sometimes blocks when there are too many programs open increasing disk access freezing the system and I have to reset the computer. Not really convenient.
So what can I do to make the installation usable on the onboard Intel controller? Is there any workaround? Of course I would like to avoid reinstalling everything and waste a week's effort!
View 2 Replies
View Related
Sep 27, 2013
I was wondering if there is a way to transfer a 32-bit Windows 8 Pro Upgrade license to a bootcamp partition in a 2012 Mac Mini without having to buy a new one. I bought Windows 8 for my laptop and the laptop will no longer be used. So is there a way I could maybe deactivate the license on my laptop, and reuse the same license on the Mac Mini?
View 7 Replies
View Related
Jan 6, 2013
I want to move all my data from my MacBook to a laptop with Windows 8. I have everything backed up on an external HD; when I plug the HD into the laptop, it's not recognized. I've tried transferring via WiFi, but the MacBook is not allowing that to happen. Is there anything I can do with my backup HD so that it is recognized by my new Windows 8 laptop?
View 2 Replies
View Related
Apr 16, 2014
I am currently using windows7 in a 1 tb harddrive. I have another internal harddrive that im not using that has windows 8 on it but is only 150gb. How do i bring windows 8 to the 1tb harddrive i am using to replace windows 7?
View 6 Replies
View Related
Feb 25, 2014
i have created a custom install.wim of win 8.1 pro using windows pe usb drive and sysprep generalise option. when i run my new setup and enter key it says "this key doesn't work with this edition of windows. try a different key". But i have tried all edition generic keys but none work. I also tried creating a ei.cfg file, but then it says "setup has failed to validate the product key".
View 4 Replies
View Related
Jul 1, 2014
My Asus laptop does not give me an option to make recovery CD's it only shows USB as the only option. The laptop has no built in CD-DVD but I have external drive..... Can I make recovery CD's.... I did make a recovery USB but would like CD'S also,
View 9 Replies
View Related
Mar 28, 2013
I plan to get a ssd drive and run only windows with few other most useful software on it.
I transfer only windows 8 system with system settings. can I make a image of windows system only, not whole hard drive? and how to backup activation. the windows 8 I have is a upgrade license I brought from Microsoft upgraded my existing windows 7.
View 11 Replies
View Related
Feb 10, 2013
I have two cards, a class 6 and a class 10. The problem is not reproducible on my laptop, which transfers around 8mg/sec.
I've had intermittent problems since upgrading. At first i was getting what i consider a normal transfer rate of 8-10 mg/sec with each card. But several weeks ago I began experiencing rates of UNDER 1 mg/sec. That is KILObytes. It takes an hour to transfer my photographs, which is amazingly not ok.
I have a standard HP set-up, basic computer model, AMD Phenom 8450 Triple-Core 2.1 GHz
I've noticed that when i turn the indexing off, the transfer rate rebounds to normal. But then i have to turn it back on and reboot before either I or a program can locate a file.
Which is also amazingly not ok.
I've tried everything i can think of short of a clean reinstall. Which i REALLY would like to avoid. I've already done that twice since upgrading in November.
View 1 Replies
View Related
Jun 2, 2014
I bought a HP notebook with windows 8.1 installed , but no installation DVD . In order to create one I downloaded from Microsoft , ( from windows.microsoft.com/en-us/windows-8/create-reset-refresh-media ) the Windows 8.1 Setup ( file OSGS14-WindowsSetupBox-32bitand64bit-English-4141408.exe ) and ran it but always receiving the message : we can't connect right now . I have tried more than 20 times and failed.
View 2 Replies
View Related
Jan 6, 2013
I bought a new PC the other day, and it has Windows 8. It advised me to make recovery disks, so I started the Setup Wizard. However, when it tried to actually burn the first disk there was an error, and it didn't complete.
Now, when I try to do the recovery disks again, right after it has prepared the files, the following error comes up: "Unhandled Exception: cannot create a file when that file already exists.".
So i'm a bit stuck. Is there a way to get my recovery disks done?
View 5 Replies
View Related
Aug 19, 2013
I tried the sys command which used to work under older operating systems.
View 9 Replies
View Related
Jun 15, 2014
One of the first things I did when I had my new PC last year was to make a set of recovery discs. Now having used the free upgrade to Windows 8.1 I would like to make a set of backup discs for this version, however, my pc say that a set has already been made and I can only make the one set.
If things stay like this, when I want to do a recovery using either the hdd partition or the discs I made, it installs Windows 8 and then I have to install what seems like a million updates before I then have to go back to the store and do the upgrade to 8.1.
Is there a way I can make a recovery dvd's for the 8.1 version ?
View 9 Replies
View Related
Oct 28, 2013
I originally had windows 8 prowmc licensed (I have the iso image for that in case I need to reinstall); I upgraded /updated from store free update; now I have a valid licensed 8.1 running; but I don't have an iso; and if I have to re-install, I have to install 8, activate it and again do a 3.5 gb download to update;
I read from DISM that I can make a install.wim image from the existing hdd OS partition; so is it possible to create an image for the existing 8.1 OS?
View 8 Replies
View Related
