My Asus laptop does not give me an option to make recovery CD's it only shows USB as the only option. The laptop has no built in CD-DVD but I have external drive..... Can I make recovery CD's.... I did make a recovery USB but would like CD'S also,
I bought a new PC the other day, and it has Windows 8. It advised me to make recovery disks, so I started the Setup Wizard. However, when it tried to actually burn the first disk there was an error, and it didn't complete.
Now, when I try to do the recovery disks again, right after it has prepared the files, the following error comes up: "Unhandled Exception: cannot create a file when that file already exists.".
So i'm a bit stuck. Is there a way to get my recovery disks done?
One of the first things I did when I had my new PC last year was to make a set of recovery discs. Now having used the free upgrade to Windows 8.1 I would like to make a set of backup discs for this version, however, my pc say that a set has already been made and I can only make the one set.
If things stay like this, when I want to do a recovery using either the hdd partition or the discs I made, it installs Windows 8 and then I have to install what seems like a million updates before I then have to go back to the store and do the upgrade to 8.1.
Is there a way I can make a recovery dvd's for the 8.1 version ?
Some time ago Installed Windows 7 on one of my Windows 8 computers. But during the install i had to delete all partitions and that was the recovery partition that had he recovery software on it. Well now I want to go back to Windows 8 and I don't really want to send my PC to Samsung for re imaging. But I have the image i made with the software before I installed Windows 8. All I need is to get the recover partition back with the software on it. I have 2 other Samsung computers that have the same software on it but I need to find a way to make a image of the recover partition so i can use my backup image for the computer.
I have a Lenovo Z710 laptop(see spec's)and want to make a recovery USB and also setup a backup system. This is a new machine and I don't want to make a mess of it.
I have a 32GB USB drive to make the Recovery on.Lenovo refers me to this method to make a Recovery USB :Methodology to create Recovery Media and reload a Lenovo Think system with Microsoft Windows 8 preload
Is this a good way to do this or is there a better way ?
I also need to setup a backup system, what is the best program to use for this, paid or not ?
I have a 1TB HDD in an external enclosure with 3.0 USB cable to use for the backup's.
If you have a recovery drive - that includes the recovery partition - made on one computer, but have a toshiba laptop with a bad drive (but the recovery partition is ok), can you replace/copy the partition on the recovery drive with the recovery partition from the bad laptop HD?
My friend's laptop would not boot, and would not factory recover, reset, or refresh. I tried to clone the hard drive before I started messing with the disc. It would not clone, but I was able to copy the recovery partition to a USB drive.
He never make recovery discs, so could not re-install, but I can borrow the recovery drive that my aunt made for her laptop.
i have created a custom install.wim of win 8.1 pro using windows pe usb drive and sysprep generalise option. when i run my new setup and enter key it says "this key doesn't work with this edition of windows. try a different key". But i have tried all edition generic keys but none work. I also tried creating a ei.cfg file, but then it says "setup has failed to validate the product key".
I bought a HP notebook with windows 8.1 installed , but no installation DVD . In order to create one I downloaded from Microsoft , ( from windows.microsoft.com/en-us/windows-8/create-reset-refresh-media ) the Windows 8.1 Setup ( file OSGS14-WindowsSetupBox-32bitand64bit-English-4141408.exe ) and ran it but always receiving the message : we can't connect right now . I have tried more than 20 times and failed.
I originally had windows 8 prowmc licensed (I have the iso image for that in case I need to reinstall); I upgraded /updated from store free update; now I have a valid licensed 8.1 running; but I don't have an iso; and if I have to re-install, I have to install 8, activate it and again do a 3.5 gb download to update;
I read from DISM that I can make a install.wim image from the existing hdd OS partition; so is it possible to create an image for the existing 8.1 OS?
Is it possible not to have the partition "recovery"?
Because if you look at the two tutorials:
- UEFI (Unified Extensible Firmware Interface) - Install Windows 7 with - Windows 7 Forums
- UEFI (Unified Extensible Firmware Interface) - Install Windows 8 with
In the tutorial to install Windows 7 in UEFI, there is not that damn partition recovery, while in the tutorial for Windows 8, we can see it.
When I install Windows 7 (MBR mode), I avoid this partition "recovery" by creating a partition with a name before installation. I install the OS on it and everything is fine, no partition "recovery" But here, since one must delete all partitions, If I create a GPT disk with a partitioning tool before installing, is that it might be appropriate?
I have a brand new ASUS G750JX running Win 8. The OS is on a 750 GB HDD and I would like to install a 256 GB SSD and move the OS and a few programs to the SSD. Can I clone the drives than use 750 GB HDD for storage? Or is the a better way of moving all the stuff to my SSD?
Having used Windows 8 satisfactorially for a while now on a VM I'm trying to install it on a real PHYSICAL machine. To save the hassle of burning DVD's I decided I would like to install from a USB drive however when trying to create a bootable USB stick using the usb tool from the tutorial it always fail with "Cannot copy the files".
I've tried on 3 different USB sticks from different manufacturers so it's almost outside the possibility that all 3 USB sticks are defective. I'm trying to run this on W7 X64.
Any links to an alternative tool that will do this ...
I know that by using recimg, you can make a custom refresh image. And I hear that you cannot use it to reset Windows to factory state. is that so? if so, how do I do that?
Also, is it possible to store the recovery image in a hidden partition. hidden in the sense, the drive letter is not automatically assigned when you refresh/reset Windows, nor can you do it from Disk Management. only from diskpart. however, if i can still use reset while keeping the recovery image in a hidden folder in C: drive, that is still fine i guess.
The thing is, the recovery partition of my Dell Latitude 10 tablet is destroyed (it's Dell's fault though) and even though i can easily recover Windows as I have an iso image and can use the USB to reinstall windows like we normally do on our desktops, i want to sell the tablet and i want to make it recoverable via the recovery features in Windows 8. without the ability to recover, the value of the tablet will be pretty low. if all else fails, i will have to buy a cheap USB flash drive, make it a recovery drive and give it with the tablet. sucks!
It is fine if i have to update to Windows 8.1, if it makes it possible in Windows 8.1 even though it was not in Windows 8.
I have over 600 GB on my HDD from games, media, and files. I bought a 250GB SSD to boot my OS off of and put some selected programs on. Even after deselecting all my media files, there is still too much on my HDD for the included Samsung clone client to proceed. I just want to use my new SSD as a boot drive for the OS and for several programs while retaining all my other files on my existing HDD.
I bought my wife a new VAIO Sony laptop. It came with Windows 8 installed. She has been using a Toshiba laptop with Win7. She wants no part of Windows 8. (She is 84 years old) & spends a lot of time on her laptop.
I want to put Win7 on the Sony VAIO. I don't want to save anything on it. I want to make a Clean install by reformatting the HD. However, I know you can not completely reformat the HD because of the "System Reserved" partition. How to do a factory reformat?
The computer I am using is a Dell Inspiron M5040 laptop.
I got a Samsung 840 Pro Series SSD to replace my HDD, and used the Samsung Software that came with it to image my OS over to the SSD. It had an error at first, so I removed my antivirus program and ran it again, and it worked.
Everything works pretty much the same, except for noticeable differences in search and Internet webpage access.
If I search in Explorer, the searches are fast and prompt. But if I search with the regular search charm ( WIN+S ), searches are more than 7x slower than on the previous HDD. Also, webpages a quick to load on different computers (not the internet speed, in other words). But this computer had slow loads, and now the loading is even slower on the new SSD.
Things I've tried:
Multiple SFC scans - all say there is some files that could not be fixed All windows updates installed enabled Trimm, updated SSD firmware, ran Windows SSD optimization, optimized computer for SSD use Reset Internet Explorer Rebuilt index
I'm thinking of ditching this slower laptop in favor of something... anything nearby. Regretting either imaging to another drive, or using Samsung to do it.
I recently picked up an Asus laptop, a SDD to replace the the laptop's HDD, and a HDD caddy to hold the HDD in place of the CD/DVD drive. After a fresh Win 8.1 install on the SDD, I made system images of both the SDD and the HDD with the Win 8 OEM install (both stored on external drive). I also created a USB recovery drive and then formatted the HDD.
Fast forward a few weeks... It's last Friday. I'm about to leave for a business trip. I boot up my laptop and a screen comes up telling me to "reboot and select proper boot device". I pull the SDD out, hook it up to my desktop, and see that the drive shows up, but it's blank. A little googling turned up a few reviews from other people with the same issue. On rare occasion, it will wipe itself. Using the USB recovery drive and the Win 8.1 system image, I got things up and running again.
Now for my question, instead of constantly carrying around the 2 USB drives holding the recovery and system image, can I create a recovery partition on my HDD that I can boot too if my SDD wipes again? (Could I copy or clone my Recovery USB to a partition on my HDD?) Then I could just keep the SSD system image on the HDD in case I need to restore it, right?
Disk 0: SDD disk that wiped itself Disk 1: HDD that I'd like to have a recovery partition and system image on
I also have: Win 8 OEM system imageWin 8.1 system imageRecovery USB drive (8.1)Win 8.1 USB Install drive
OK, my company has a licensing agreement with MS with Software Assurance, so i downloaded the US English Win 8.1 Pro ISO.
Details on the ISO below: MD5 (SW_DVD5_Win_Pro_8.1_64BIT_English_MLF_X18-96634.ISO) = ae933ae02925d6ece7f325ca93dcb118
First I tried installing on a late 2013 27" iMac running Mavericks. I ran the Boot Camp Assistant and tried installing multiple times, both options: 1) with a DVD (which was verified when burned) and USB drive for the Apple drivers, & 2) with a USB drive only, that Apple extracts the ISO to and loads its drivers on. Each time I got the following message:
Your PC needs to be repaired
The operating system couldn't be loaded because a critical system driver is missing or contains errors.
You'll need to use the recovery tools on your installation media. If you don't have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer.
Press Enter to try again
Press F8 for Startup Settings
If I simply power off the iMac and boot it back up, it goes straight into OS X. If I run Boot Camp Assistant again, it prompts me to remove Windows & resizes the disk back to all OS X.
So I decided to try on an old DELL that uses a BIOS and is already running Windows 8.1 Pro. It fails if I try to run setup.exe from within Windows, & if I boot with the DVD I get the exact same message I get on the iMac.
My son's laptop (Windows 8) failed, and despite F9 options to reset or refresh, and CHKDSK was unable to recover the system due to bad disk sectors. I bought a new disk , but as I had made no recovery media, and the OEM doesn't supply any, I have no way of reinstalling Windows 8.
However I did mange to install Ubuntu Linux on the new disk and the Laptop is now working fine. Out of curiosity I connected the old bad disk via a USB enclosure, and lo and behold Disk utility was able to read the OEM Recovery and Restore partitions. I have made several copies of these on a Win 7 laptop, USB and LInux partitions, and all look good (as far as i can tell).
My issue is that as the OEM recovery partitions seem fine, I reckon they should be installable onto the new disk, but I am at a loss as to how I can use this data to reinstall Win 8 onto my laptop. Most of the advice I can see assumes a working copy of WIn 8 or having a retail Win 8 ISO, which of course I do not have. Remember , unlike Win 7, WIn 8 has no product key identifiable as it is contained in the BIOS somewhere, but I reckon it should recognise the OEM's recovery partition if I only could manage to load it.
I now have a sketchy knowledge of lots of new terms (mounting , partitioning, MBRs, boot sequences etc ) so exactly what to do. [ The tutorial on this form requires a retail win 8 ISO]. I did find a Linux method involcing DD, DDRESCUE , PARTPROBE etc ) which I have tried but all to no avail - I am sure I was close though! ]
Basically, I upgraded from windows 8 to 8.1 a few weeks ago and since I could barely run any games, they have compatibility issues and all sorts.
I tried updating my drivers, it says they're all up to date I spent countless hours looking for solutions on how to downgrade All the solutions require me to have a disk, but I lost it I also looked up on how to set it back to it's factory setting, but it doesn't work
I was told to press F8 or F9 (can't remember at them moment) as soon as the computer turns on until the recovery screen pops up, but it never does.
I'm using an Alienware x51. Is it even possible to reset my computer without the disk? if not, then where can i get another disk that came with the computer?
I am sure I have recovery images. Factory, and refresh. Asus shipped no recovery media. I obtained a copy of windows 8. I found out what my product key is. I have attempted every which way i can think of to get my system to recognize my recovery images exist. If i try to use "reset your pc" option it tells me unable to reset your pc. A required drive partition is missing.
If i choose system image recovery, hit cancel because it thinks the partition that definitely exists, doesn't, choose select a system image. Gives me a blank list. Choose Advanced...install a driver (you don't need to install sata driver as it recognizes my hard drive and Is listing it to choose a driver from should need be) i get an error installation had failed.
Internal error occurred (0x8007054F). No matter which driver IM trying to install. Usb, sata, dvd etc... So can't get my system image from my 32 gig stick, or my hdd.Image won't fit on dvd's. Worried i won't be able to do a clean install, as Asus's backups seem do reliable in mysituation(sarcasm) that i will lose all functionality like DVD playback, smart gesture touchpad, and some driver related setbacks.
I have checked and rechecked, and i have three system images to choose from. Total of six partitions.
i installed monitoring and filtering software on the computer. my kids just restarted the computer and choose refresh and it was gone. in win 7 i set a new restore point and deleted the previous ones solving that problem. i know that there is a way to not allow using the system refresh with group policy and regedit hacks but i would not like to have to go down that road.
how can i control what the restore and refresh settings do?
I have some problems with my laptop ASUS K55VD. I had windows 8, but with the store of windows I have updated to windows 8.1.
I have tried to use the recovery partition, but every time I try appears a message. Failed to reset your computer. A partition of unity necessary is missing. For that reason I have looking for some information, and with CMD commands like "diskpart". I have noticed that I have 8 volumen.
And in Computer Management appears this.
Then googling recommend to use EaseUS Partition, and some many things change. In the beginning, I had the same 3 partions in red and I don't know what happened.
But in diskpart change too, and I only have 4 volume, and it have dissapeared the recovery partition, and I don't know why?
Before to use EaseUS partition I have created a USB booteable with 9.79gb, and I had this:
But, in this days I have tried to create the USB booteable again, but I can't. And everytime I have tried to run the usb, appears to select the language, the keyboard, and then appears the same windows with troubleshoting and turn off (it returns at the previous windows in blue)
My daughter brought her Gateway NE71B laptop to me because it was running like a snail. She had NO anti-virus software so I plugged in an external HDD and created what I thought was a Recovery Partition. When I had the computer boot to the external drive I tried the auto repair twice and failed both times.
When I tried to recover from the external drive I got an error message that said I/O error that could be caused by the fact that a portable device needed to be plugged in to continue.
Didn't know what to do so I unplugged the drive and tried again. No bootable devices found. Plugged the external drive back in and got the same I/O error. So I thought I'd just order the recovery media from Gateway. The day it arrived, I put the System Recovery disk in, It booted to the recovery screen with 3 options; Full recovery (original factory setup), Full recovery after removing data and Exit. I've tried both the first 2 options and up pops a window that says; Recovery must be done in Legacy Mode.
So I changed the bios from UEFI to legacy, restarted the computer with the Sys. Disk still in DVD tray, It start to load the recovery screen and up pops a window that says; Recovery Can Only Be Done In UEFI Mode.
If I were to guess, I would say I have an MBR virus and it's playing tricks with me. I've ordered a new identical hard drive to install when it arrives and hope to be able to get the recovery media to get back to normal.
I have a brand new system with an OEM version of Windows 8 installed (Core not Pro)
ASUS CM 6870 2 TB HD 16 TB RAM ASUS P8H77-M Pro Motherboard
The new system works well but I have also purchased an OCZ Vector 256GB SSD and intend to install it as my primary hard drive.
ASUS didn't and will not supply a recovery disk.
ASUS provides an activation key for a downloadable version of Acronis True image. I tried that but their version is not compatible with Windows 8. I managed to get a newer version but it didn't recognize that the SSD was installed.
Next, I used Win 8 to make a recovery drive USB drive thinking that I would be able to do a clean install of Win with it. I had the 2TB HD disconnected and the SSD installed but the recovery drive refused to install Win 8. I either got the message "The drive where windows is installed is locked. Unlock and try again." or "The drive is too small to format" (the wording on the last may not be exact)
I was able to "find" a Windows 8 ISO file. I burned it to a DVD and was able to install Win 8 but it was not a UEFI installation. There were only 2 SSD HD partitions: 1. System Reserved - 350 MB NTFS. 2. 238.13 GB NTFS Healthy.
I then deleted these volumes and followed the UEFI installation instructions in the thread: UEFI (Unified Extensible Firmware Interface) - Install Windows 8 with
Windows installed but it was not a UEFI installation. I got the same partitions as above. At step 6, I only saw the 2 partitions. I tried this process twice with the same results.
The USB stick was prepared using the instructions in this thread:
UEFI Bootable USB Flash Drive - Create in Windows
I think that the USB drive should have had 4 partitions on it but it only has one: