Enable System Recovery Or Recovery Media Creation And Make Recovery Disk?
May 29, 2014
I pay a used laptop Sony Vaio SVF 143100c from china , they install windows 8 Enterbrise and no other software or drivers
when I check I found a recovery volume on the hard disk I assign this volume and copy all the recovery content to external Hard disk, size is 18 GB
and the product key is valid for Win 8 RTM CoreCountrySpecific OEMM,
I don't have a Recovery Media disk or usb to return to Factory condition, how to create a recovery disk to access tis image and re install tis laptop to Factory condition
I just bought Dell Inspiron 14, 3421 yesterday and trying to create Disc from Backup and Recovery Software provided by Dell.
I have bought this india and found mulitple post facing the problem what I am facing. I have upgraded Dell Support Center and Also Dell Backup and Recovery using the Update tile. I have windows 8. BIOS A04.
These are the problems I am facing....
Problem1: After writing to Disc1, it does not accept 2nd disc and keep ejecting 2nd disc again and again
Problem2: Even if I insert USB, the software still does not dectect USB.
I am not able to create any backup even after trying 3-4 times.
Not sure if it's Lenovos only, but trying to migrate Windows 8 OEM to an SSD has been a huge pain in the ass. This process should not be as difficult as Lenovo/Microsoft has made it.
I purchased a Y400 along with a 256G SSD. I'd like to clean install Windows onto the SSD, I did not want to copy image. I went through forums for hours trying to put a recovery system on a usb with no luck (even with the instructions given by a Lenovo moderator on their website), I kept getting "missing partition drive". I broke down and paid Lenovo the ridiculous "shipping charge" of $59 for the recovery disks.
These are my steps so far:
-My SSD is installed and I removed the HDD (until Windows 8 was installed, I'd then format it) -Put Disk 1 into the optical drive (Disk 1 states it's the format sequence and starting point for restore, Windows 8 actually on disk 2, I believe) -Pressed the "Novo" button on the left side of the machine (gives options of Normal Startup, BIOS Setup, Boot Manager and System Recovery)
*FYI - Boot Manager lists: Windows Boot Manager and 2 EFI volumes (when HDD is plugged in, just the EFI's when uninstalled) System Recovery only works with the HDD installed and it's Lenovo's One Key Recovery which just restores to a restoration point.*
Went into BIOS setup Tabbed over to "Security" Disabled the "Secure Boot" Tabbed over to "Boot" Changed the Boot Mode to "Legacy Support" Changed Boot Priority to "Legacy First" Saved then exited.
Pressed the "Novo" button once more, went into BIOS setup Tabbed back to "Boot" Boot device priority was now displayed with SATA ODD, SSD and Network Boot. I reordered to boot from SATA ODD Saved and exited
Upon restart, I pressed F12 (select boot device), and chose the SATA ODD It went into a DOS looking screen and gives "No Bootable Device - Insert boot disk and press a key" I've also tried variations of the above procedures for a few hours with no luck.
I have not tried to boot from "Lenovo Recovery System" (which is only available with the HDD installed), I figured it would default to the HDD and not let me chose to install onto SSD.
I am trying to get a handle on how these 2 functions are related. I assume the Recovery disk would be needed if you can't boot to the computer (assume the OS needs to be present) and does the Recovery disk replace the boot files that may be damaged and then after you get booted up I assume the System Image (is that is referred to as a "backup")?? would be ran to get the computer back to the working order when the Image was taken. Assume that the Recovery disk would take place of the OS installation disk if it were not available and you couldn't just reinstall the OS and so you could load the Image.
I decided that I should, create a System Recovery DVD for my new computer. However when I try and do it I only get the option to create a recovery USB Drive.
I did that but I'd still like to make a DVD disk.
Ps. I see that my system recovery USB drive has an empty folder called Sources. If I was to place a backup of my C: drive in that folder would it be automatically accessible and usable from the DVD drive?
Hmmm, I can't seem to find a way to use Windows to create a backup of my C: drive either.
I have a Lenovo Z710 laptop(see spec's)and want to make a recovery USB and also setup a backup system. This is a new machine and I don't want to make a mess of it.
I have a 32GB USB drive to make the Recovery on.Lenovo refers me to this method to make a Recovery USB :Methodology to create Recovery Media and reload a Lenovo Think system with Microsoft Windows 8 preload
Is this a good way to do this or is there a better way ?
I also need to setup a backup system, what is the best program to use for this, paid or not ?
I have a 1TB HDD in an external enclosure with 3.0 USB cable to use for the backup's.
I have done the partition of HDD of my new Dell inspiron 7520 laptop and now I am not able to create a System Recovery disk nor in USB drive. System keeps on reading the disk or Drive.
I have bought a new PC/Server to be used as a media server, I have 2 x 2TB disks installed which I believe I have mirrored.
See below screenshot.
From the reading and research I have done I don't believe if one disk was to fail the other one would work, I think I may need to mirror the EFI system Partition and Recovery Partition of which I'm not too sure how to do this?
If you have a recovery drive - that includes the recovery partition - made on one computer, but have a toshiba laptop with a bad drive (but the recovery partition is ok), can you replace/copy the partition on the recovery drive with the recovery partition from the bad laptop HD?
My friend's laptop would not boot, and would not factory recover, reset, or refresh. I tried to clone the hard drive before I started messing with the disc. It would not clone, but I was able to copy the recovery partition to a USB drive.
He never make recovery discs, so could not re-install, but I can borrow the recovery drive that my aunt made for her laptop.
I am trying to create recovery discs from "Dell backup and Recovery application" however when i was asked to insert the second DVD,the optical drive keeps rejecting the DVD. The application will not continue to burn the second DVD and appears to be frozen. I tried with different brands/makers of DVD and also -/+ R. Unfortunately .Issue remains. I was able to find this article 593906 Published on 2013-01-21 ( relative link [URL]... ).
Although i have done the updates ,i am still not able to create recovery discs !! Current Issue: after inserting the 3rd Disc application gives the following message "Dbr.exe -No disc found" and stays there and rejects the DVD. I spoke with Dell's Greek Support team. I was told that warranty does not cover sw support even if my unit is less than a week old. Furthermore i was informed that although "Dell backup and recovery" application says DELL is not actually a Dell product thus they can't support it. They suggested my to use windows 7 file recovery instead (which needs at least 8 DVDs !).
My Asus laptop does not give me an option to make recovery CD's it only shows USB as the only option. The laptop has no built in CD-DVD but I have external drive..... Can I make recovery CD's.... I did make a recovery USB but would like CD'S also,
How to make a Widows 8.1 DVD disk that works as a recovery disk.What your actually making is an Windows 8.1 Enterprise Evaluation installation disk. When the disk boots up, you select repair disk instead of install. This will give you access to all the repair programs as well as system image recovery option.
All you have to is, go to this webpage (Download Windows 8.1 Enterprise Evaluation) and download the ISO for Windows 8.1 Enterprise evaluation. This will let download the ISO file. Warning, this file is 3.7 gig big and takes a few minutes. After that simply burn to disk. When you boot this disk, just choose repair instead of install. Just note, that like all install disk it takes time to load. 2 minutes and 20seconds on my machine.
I tried to make recovery discs but Win 8.1 won't allow that anymore. This is from a MS full install disk, not OEM partition or similar. I tried the flash drive method and it did do that. However, the customer had only a USB flash drive adapter that allows MSD to fit. It accepted that and created the recovery flash drive using that setup. However, upon rebooting it just doesn't go into recovery mode. It just sits there prior to boot menu setup after pressing [ESC] for the laptop. What is going on? I know the flash drive is holding the boot process after I press [ESC] to enter boot menu for the laptop, what gives. I really don't think a true flash drive will work as well, though i couldn't test that at the time.
Win8.1 32-bit installed and updated HP probook 4510s 2gb ram celeron cpu
I want to create bootable recovery media in case the computer fails. I have tried to create a recovery image using the in-built windows recovery tool but the RefreshImage/ Customrefresh.wim file will not copy onto a usb stick.
Background: I have upgraded 4 home computers from Windows 7 to 8 to 8.1. The upgrades were done through the Microsoft website and Store as downloads. I had problems on two computers with Windows 8 and the recovery usbs I made did not work with them (missing files) - I had to reinstall the whole system again through renewed download. I want to avoid this problem again. This is the situation on my own main computer at present. I opened the create recovery tool in windows. It could not detect a recovery partition/ image so I went ahead and created the RefreshImage/ CustomRefresh.wim file using the instructions from the Microsoft tutorial. This is now sitting happily on my C drive, but the create recovery tool does not recognise it ('copy' box is greyed out). I see that I have 3 disk partitions on my hard drive: Volume 1 is called the Restore Partition. It has no letter designation and says it is 100MB in size but 100% free Volume 2 is the normal C drive for booting. Volume 3 is a hidden PQService partition of about 19GB with 60% free - I am not sure if this is new or belongs to the original OEM.
create a bootable USB stick for windows 8.1? I am not sure why the windows tool does not recognise the refreshimage folder for copying onto the stick and, based on my previous experience with windows 8, the basic recovery usb that I can make does not contain the files that are needed when something goes badly wrong.
I bought a new PC the other day, and it has Windows 8. It advised me to make recovery disks, so I started the Setup Wizard. However, when it tried to actually burn the first disk there was an error, and it didn't complete.
Now, when I try to do the recovery disks again, right after it has prepared the files, the following error comes up: "Unhandled Exception: cannot create a file when that file already exists.".
So i'm a bit stuck. Is there a way to get my recovery disks done?
One of the first things I did when I had my new PC last year was to make a set of recovery discs. Now having used the free upgrade to Windows 8.1 I would like to make a set of backup discs for this version, however, my pc say that a set has already been made and I can only make the one set.
If things stay like this, when I want to do a recovery using either the hdd partition or the discs I made, it installs Windows 8 and then I have to install what seems like a million updates before I then have to go back to the store and do the upgrade to 8.1.
Is there a way I can make a recovery dvd's for the 8.1 version ?
I purchased a Dell Inspiron 15 pre-installed with Windows 8, then after I upgraded to 8.1. How do I make sure I have bootable disks or a backup copy of Windows in case there was a system failure since the PC didn't come with a copy of Windows in CD format?
I built my own PC last year and I've done several OS upgrades in that time frame. First I started with windows 7 basic which I then promptly upgraded to 7 ultimate because my university offered upgrades for $7. I then upgraded to 8 when it first came out and then 8.1 too. I put a new SSD in my PC and copied all my 8.1 data on to it I then turned the old SSD in to a second boot drive for OS X. I'm having problems with 8.1. I wanted to create a repair drive to hopefully root out and fix whatever is causing windows explorer to crash. It's not a virus I've made sure of that. I have a feeling whatever caused this happened when I upgraded to 8.1 and then copied over the SSD. What my product key is for 8.1 pro i just found the email microsoft sent me with my windows 8 key but i have no disc.
when i followed the instructions to make a recovery drive it told me that some of the required files are missing and to use a windows installation disc or media which is a problem because all my windows 8 upgrades have been done online.
also my PC currently doesn't have a disc drive i removed it because i only ever used it to install windows 7 basic.
I'm trying to do a complete recovery of my Windows 8.1 laptop (The "Remove everything and reinstall Windows" option). A few seconds after I try to initiate the recovery, I am stopped by a message that says:
"Some Media Files are Missing. Your Windows installation or recovery media will provide these files"
After this message appears I am prompted to cancel the restoration. How can I bypass this message to continue with the recovery? My laptop is 4 years old and is ready for a recovery.
My laptop was purchased running Windows 7 64bit, from which I upgraded to Win 8 64bit Pro through a free download from my school. I have my Windows 8 installation key, but not the download files. I upgraded to 8.1 through the Windows Store free download.
I have a Dell 15r and a Recovery Media for Windows 8 in DVD.
I would like to be able to install Windows 8 (UEFI) from an USB drive. I've already tried the usual methods (Microsoft and also some 3rd party tools to create an USB-bootable media), but I got different kind of errors. It seems the image is not compatible with these methods.
So i have a 12 duo, and it has been acting slow lately and i figured it is time to bring it back to its younger days. I tried doing the reset within windows 8, but it asked for installation/recovery media, which i don't have. And i know what you're thinking, just use the recovery partition. No can do... it is gone. I do not remember getting rid of it but anyways, its not an option. I tried creating a recovery usb via this link but my key did not work for retail versions. What can I do?
Some time ago Installed Windows 7 on one of my Windows 8 computers. But during the install i had to delete all partitions and that was the recovery partition that had he recovery software on it. Well now I want to go back to Windows 8 and I don't really want to send my PC to Samsung for re imaging. But I have the image i made with the software before I installed Windows 8. All I need is to get the recover partition back with the software on it. I have 2 other Samsung computers that have the same software on it but I need to find a way to make a image of the recover partition so i can use my backup image for the computer.
I have (had) a dual boot with Windows 8.1 and win7 and I was using EasyBCD to edit the boot order. Now, when I try to reboot, I get a blue screen - saying 'RECOVERY - Your PC needs to be repaired'. I have a bootable USB recovery medium for win 8 but the problem is that I can't boot to it and fix the problem because I can't access the boot menu in my BIOS. The usual F12 option to select the boot device isn't showing up no matter what I do. I read that it has something to do with Windows 8's hybrid shutdown system. Is there any way to get out of this 'hybrid shutdown' so I can once again access the boot menu?
I have an HP Envy notebook. bought it 3 months ago. made recovery disk (actually it's on a flash drive). Had troubles with the notebook. HP support walked me through factory reset. Twice.
Never used the flash drive. used whatever was on the computer. Whether or not to keep the recovery stuff I put on the flash drive? Just wondering if its a waste of a perfectly good flash drive, seeing as I never used it when I reset.
All of a sudden I can't reliably play any video media on my Win 8 64bit computer -- was working fine yesterday and AFAIK nothing (other than perhaps Windows automatic updates) changed. My first thought was to try and restore but even though I'm sure I created a restore point it tells me there isn't one. Sigh.
Okay, so then I try to perform a reset (but keeping all my files) and it tells me some files are missing and to insert my recovery media. All well and good, I actually have that (and know where it is) but when I insert the disk it tells me it is NOT a recovery disk.
It is, of course, precisely that -- a Windows 8 Recovery Media for Windows 8 Products 64 bit. I am running an official copy of Win 8 (well, 8.1, but I have no media for that since it was a free update). Yes, it's OEM (Dell) but that shouldn't make a difference. And, more importantly, what I am to do now?
I had some problems with Ubuntu, and wanted to recover my Windows 8 MBR, so that I can boot back into it, and not a corrupted version of Grub2. Anyway, I burned an iso for the Windows 8 recovery disk, and the disk is fine since it works on another computer. However, it doesn't work on the computer I want to use it on. The recovery disk says
Code: Loading files...
And completes a loading process. Then, blue squares go along the top of the screen. However, it suddenly turns off my computer in the middle of the process. I've tried this multiple times with the same result.
My hard disk crashed. I have a recovery cd created on the time of purchase. I bought a new hard disk for this purpose. Now when I am trying to recover from the same cd it is getting stuck at 40 % showing error. I searched for this error and got something as such recovery disk can work on OEM hd. As my old hd has crashed how can I recover over there. Is there any system that dell provide me with necessary operating system so that atleast I can use my system.
In july 2013 I have installed windows 7 (because of s/w that I had to use and were not supported by windows 8) on my Dell Inspiron (Service Tag DYGGMV1, I know its out of warranty) and was guided by dell support and was assured that I will be able to again install windows 8 with recovery media, and when I requested for Windows 8 setup CD and key I was told its not needed as I have recovery media with me. Now I am willing to shift to windows 8 again but recovery media is showing error ( error 0x4001100200001005).
After refreshing my windows 8, i noticed that my second drive i.e recovery disk (D: winretools) is no longer visible in my computer. My laptop model is Dell inspiron 15R
