I want to upgrade from Windows 7 64 bit Home edition - To Windows 8 64 bit Home Edition.
I currently have my windows 7 installation on drive C (64GB SSD)
My user profiles, Data and programmes are stored on Drive E ( 1TB HDD )
If i use the windows 8 upgrade option - What will happen?.
I bought an upgrade version of 8.1 Pro from my university, so I need to have an os installed before upgrading. However, I want to install it on my new PC, which means I have to install Win7 before upgrading. I wanted to know if I can install win7 and immediately install the upgrade, or is it better to go to windows update and install all the updates before upgrading?
View 3 Replies View RelatedI am dual booting Windows 8 and Win7, using one 500gb hard drive. Win7 has been my main OS, so all of my music, photos, etc. are stored there.
How can I access the user data from my Win7 install , from my Windows 8 install?
Everytime I try to go to it from Windows 8 ---- > My computer it says that I don't have permission to access the files for that user,then attempts to do so for some random period of time, and in the end nothing happens.
Anyways, my machine is running win7 HP with the drive bitlockered, can i just go install Windows 8 straightaway or do i have to decrypt and disable bitlocker first?
View 3 Replies View RelatedWhen I run setup I get this message:
"Something happened, We can't tell if your PC is ready to continue installing windows 8. Try restarting setup"
What can I do?
I'm running a Win 8 Pro x64 box, with Windows on C: and most of my Applications on D:
Is there any way to reinstall windows to C: without breaking my programs on D: ? I mean, a lot of the stuff will still work without any special tricks, but the things with hundreds of hard to find registry entries concern me.
Could I possibly reinstall to C: then run a repair installation for all the programs that reside on D:?
have Acronis 2013 Plus. What I am trying to do is image the disk of a Windows 7 machine (source) to a machine that had Windows 8 pre-installed (target - Gateway SX2110G).
I connected the Windows 7 drive to the new machine (USB data cable), disabled Secure Boot, and enabled Legacy. Booted to True Image and started the cloning of the drive. Everything seemed to go ok, but as soon as it starts to boot Windows 7, it gives a 7D BSOD. (the same BSOD it gives when I simply plug the source hard drive into the target and try to boot from it).
The source HDD (win 7) boots fine in its original machine.
*I tried the startup repair that's included with the image.. does it matter if I use the one from a disc instead?
I upgraded my system from windows 7 to windows 8 and now my external WDD 1TB drive is displayed in my computer, but when selecting it I get an 'Access Denied'
View 2 Replies View RelatedI am thinking about upgrading my PC from windows 7 to the newer 8.1 Pro when i buy a new SSD drive.
I am concerned that if I upgrade; I may not lose my files, but will i lose the programs already installed on my HDD?
I will load the new OS on my SSD with the HDD disconnected and then connect my HDD once installed, so i have my files etc.
Once I then connect my HDD, will I still be able to acces the programs installed on it?
And also, how would i then delete windows 7 off of the HDD? I am going to invest in an external HDD for a secondary back up and
Trasnferring data - so i could copy the files to there, wipe the Internal HDD and copy the files back.
How can I separate my Drive C User Data & Program Files to Drive D.
I was looking into Microsoft folder locations, you can check it out here: [URL] ......
I was wondering how can I apply that during a clean install.
So I had this recovery error that said my winload.efi was missing so I ran the recovery from boot up and decided to recover. I read that this will delete the files from C: so I turned on the "Maintain User Data" option and selected all including the local disk c from advanced selection. But when the process was finished, my laptop was empty and no data was restored. What happened ? did I just misunderstand how it works and now it's gone ? or is it just somewhere I can't find ?
View 2 Replies View RelatedI want to upgrade my Windows 7 home premium to windows 8 pro, but I have multiple user accounts on this PC. Will it keep all files, settings and applications for all users?
Edit: for the upgrade I will be using the Windows 8 Pro .iso file from the MSDN
I've been using Win7 Ultimate 64x for sometime now and i have all my software Installed on it. I recently bought a copy of Windows 8 and I've been trying not to install it now because i haven't studied a lot of things about it it yet and i need to keep my PC in its current state because of work, but i cant wait anymore..
So here are the FAQs if i may..
1- Can I install Windows 8 and keep my old copy of Win7?
2- Will software such as Adobe Photoshop be installed on Windows 8?
3- Is it as good of a System as Win7?
I have a Lenovo K450 with Windows 8 pre-installed.
I have a new copy of Win7 I purchased from Microsoft a few years back that I would like to install, but my PC seems to be locked to Windows 8.
I can disable the secure boot in BIOS, and install WIN7, but windows update will not function with secure boot disabled.
Can I circumvent this entirely by replacing the motherboard?
Win7 installed on SSD for 1 year now. 2 more HDD: one 2TB (name K: ) one 4TB (name T: )
About 3 weeks ago tried WN8.1 on a third HDD (1TB). After install all looked OK. Boot on WIN7 and windows tried to check disk. I let it and all looked OK. Worked normally in WIN7 and add 300GB+ of MXF files (video recorded with my camera) and 100GB+ on NEF.
After a week (approximate) boot again in Windows 8.1 . Moved from another 1TB HDD (name J: ) 55GB date on partition T (4TB HDD) and downloaded from camera 6GB MXF on partition K. On this moment I realized that on K I don't see recent MXF wrote on WIN7 after last Windows 8.1 boot.
Boot again in WIN7 and let it do Check Disk. No result: in WIN7 a see only what I see in Windows 8.1. Check Disk made an FOUND.000 on K but no files. On T I had back-up all K but some back-up was not complete after writing 55GB on it in Windows 8.1.
Now I'm scanning with recovery programs but on T I thing all is lost because of those 55GB wrote. On partition K a don't see hundred of GB (1.14TB see windows as properties of files but only 150GB free on partition so ther ar some files that ar not see by WIN7 or Windows 8.1). On T partition no unseen files (total partition space - free space = total file properties).
For testing I tried on another 1TB HDD: partition created in WIN7 and write file on it, boot Windows 8.1 and see all files, boot again WIN7 and write another files, boot Windows 8.1 and second write files are not seen.
Now I bought new 4TB HDD for scaning partition K and saving all files from it on new HDD. At this moment I have aprox. 100GB of NEF and MXF on partition K that was overwrite in back-up on partition T and for the moment is lost. Didn't work dual boot with WIN7 and Windows 8.1
I have just downloaded win 8 from Microsoft but I want to triple boot my laptop.
Extra info :
ram 4gb
Hard disk 320gb
Core 2duo processor
I have a Windows 7 computer with Lotus 8.5 on it and I need to transfer Lotus 8.5 and all it's files and emails and the encryption key to the Windows 8 computer. I do not think that Windows 8 will recognize Lotus 8.5 so I had the idea to partition the Windows 8 computer and install Windows 7 on one of the partitions thus making it a dual boot computer, then install Lotus 8.5 to the Windows 7 partition. My problem is Windows 8 is already installed on the computer and Windows website warns not to install the older operating system second.
Windows website warns, "You must install the older operating system first, and then install the more recent operating system. If you don't (for example, if you install Windows Vista on a computer already running Windows 7), you can render your system inoperable. This can happen because earlier versions of Windows don't recognize the startup files used in more recent versions of Windows and can overwrite them." What should I do? I have found some information on installing Windows 7 as a second operating system on a Windows 8 computer thus creating a Dual Boot computer and giving you the best of both worlds and full app compatibility as some of your Windows 7 applications may not be supported in a Windows 8 environment. T
Is it possible to repair or reinstall windows 8 pro while keeping the desktop app using the windows 8 installation disk and if so any link to a site that explain how to do it.
View 6 Replies View Relatedi have one 750GB hard disk with 8 partition. i installed windows 7 in first partition and windows 8 in second partition. i want to hide windows 8 drive when i boot in windows 7 and hide windows 7 drive when i boot in windows 8. with NeoGrub tools in EasyBCD can do this,
View 1 Replies View RelatedIs it possible to upgrade from Windows 8 32bit to Windows 8 x64bit or trick the PC into thinking its x64bit so I can install x64bit programs
View 3 Replies View RelatedHow to clean up the windows containing hard drive from everything but the system files, because I upgraded my windows and not installed it to a clean hard drive. I have a lot of unneeded files. How to do it, without reinstalling windows.
View 3 Replies View RelatedI have tried installing Win 7 in UEFI on my old Asus K56JV Laptop.
I have used a tutorial by Brink to create the bootable usb. The system can see it but after it has loaded, I get the following message:
Windows failed to start. A recent hardware or software change might be the cause. To fix problem
1. Insert your Windows installation disc and restart
2. Choose your language setting and click next
3. click "repair your computer"
status 0xc0000225
What should I do from here?
I have tried to make the usb both manually and with rufus usb software. The system does not currently run on UEFI, but it supports it, and I have changed it in BIOS. Also I run Ubuntu in dual boot. I don't know if the GRUB interface does anything here, because the recovery will not start either, though I believe it did so last time I formatted the laptop
1st partition is Win7 SysPrep and the 2nd partition is Windows 8.1 Sysprep. I install Win7 and press Ctrl-Shift-F3 to form SysPrep, same as Windows 8.1 in 2nd partition. I made this becuase I've 25 Dell new Windows 8.1 Computer which are UEFI. I want to clone it to the other 24 Dell computers.
CASE 1 : 2 different partitions with 2 different Windows :
---------------------------------------------------------------
If I install both Windows like above, when Sysprep Generalize Win7, it works fine. But if I SysPrep Generalize Windows 8.1, it's fine also, but never can boot again back to Win7. The start boot option is like this :
Windows 7
Windows 8.1
If I choose to boot Windows 8.1, it's fine. If I choose to boot Windows 7, it ever boot to Windows 8.1. It means nomatter I choose to boot which Windows, it all goes to Windows 8.1 ?
CASE 2 : 1 partition for Win7 + Win81.VHD :
---------------------------------------------------------------
I install Win7 (C and press Ctrl-Shift-F3 to form SysPrep.
I create a Win81.VHD in Drive D: , imagex Windows 8.1 install.wim in it. Also press Ctrl-Shift-F3 to form SysPrep.
Sysprep Generalize Win7 is OK , SysPrep Generalize Windows 8.1 is also OK. But after that I can only boot to Windows 7 fine, when choose to boot Windows 8.1 , it always restart and back to the boot menu ?
Upgraded from 8 to 8.1 about a 2 weeks ago. Noticed about a week later that my nightly backup stopped running from the time 8.1 went in. Something stuck 2 new lines of code in the .xml for the task and also changed the run-userid. My admin userid got changed to a MS admin userid. I removed the two lines of code and changed the run-userid back to the correct one and now the backup runs OK. Then I noticed that it wasn't keeping task history. Next I noticed that no tasks were keeping history at all! And I'm unable to turn history on. It said it was on, I turned it off, turned it back on again. Still no history.
View 2 Replies View RelatedI had a computer with windows 7 home premium x64. A while ago I decided that I wanted to up grade to windows 8 and so I partitioned my os drive and installed (OEM) windows 8 Pro on the new partition. During the set up I was able to set up a duel boot system with windows 8 and windows 7. When I look at the drive structure I noticed that there isn't a system recovery partition for windows 7 or windows 8.
I would like to generate a system recovery partition for windows 8 and remove windows 7 but I am not sure how to go about doing this.
My system:
Brand new Asus CM6870 desktop
2 TB HD
16 GB RAM
Win 8 Core (originally installed by Asus)
Motherboard; Asus P8H77-M Pro (AMI BIOS 0606)
Asus did not supply and will not supply original Win 8 media
I also purchased an OCZ SSD with the intention of moving Win 8 to the SSD. The exisiting HD is installed as a UEFI device and I wanted to install Win 8 on the SSD as an UEFI device too.
I installed the SSD on port 1 of the SATA III (AHCI). In every win install attempt I had the HD disconnected. When reconnected, it was on SATA III port 2 (AHCI).
After MANY, MANY attempts, I have Win 8 installed on the SSD and the original Windows 8 remains on the HD. I was unable to to a UEFI install, so I gave up and did an MBR traditional install. When I boot to the SSD, Windows works but I can't see the HD. When I boot to the HD, Windows works but I can't see the SSD.
To make a VERY long saga, less long, I attempted the following.....- created a recovery drive to use to do a clean install on the SSD - didn't work
- "found" original Win 8 Core media and used it to install on the SSD. (It worked but it was a MBR install. I tried this many times using both a DVD and a UEFI formatted USB drive using instructions found on this forum)
Up to this point, any time that Win 8 was installed on the SSD, I could see the HD as a secondary drive. If I booted to the HD, I could see the SSD as a secondary drive.- I then tried to clone the system using Paragaon - it couldn't see the SSD
- I then tried to clone the system using Mini Tool Partition Wizard (as recommended by OCZ) - it proceeded but failed and I got the "Starting Automatic Repair" message that froze the system. After unplugging the SSD, it booted to the HD.
- Based on posts here and other forums, I read that you could use the Windows 8 Pro upgrade to do a clean install. I bought it and upgraded my HD.
- The upgrade would not install on the SSD. It would only upgrade so I re-installed Win 8 Core on the SSD and then upgraded to Pro. (I had to add a PID.txt file with my upgrade licence to the upgrade disk.) After I did this, I could no longer see the secondary drive regardless of whether I booted to the HD or the SSD.- Then I re-installed Win 8 Core on the SSD to see if the Pro upgrade was the issue. - no change I looked in Device Manager and I don't see any errors but I don't see the secondary drive.
I'll attach jpgs of the Device Manager from both the SSD and the HD Win installation"
The SSD appears as unallocated on the HD Disk Manager even though Win 8 is working on that drive! The HD does not appear on the SSD Disk Manager.
I've worked on so many alternatives over the past week that I feel like I'm going around in circles.
I'll settle for a Win 8 MBR installation on the SSD with access to the secondard HD.
I am currently running windows 8 64bit OS. I have a windows 7 32bit .iso file. I want to install the windows 7 32 bit while keeping the windows 8 64bit too.
View 7 Replies View RelatedI am trying to install a new OS and I want to boot from the CD on Windows 8?
How would I do that?
i cannot boot my asus n82jv with a UEFI usb win7 64bit. It only says:
Windows failed to start. A recent hardware or software change might be the cause. To fix this prob:
1 insert your win installation disc and restart your computer.
2 choose your language settings and then clck next
3 click repair your computer
Status 0xc0000225
Info an unexpected error has occured.
Yesterday, I clean-installed Windows 8 Pro x86 on an old Dell Vostro 1400 laptop which had been running Windows 7 Ultimate, and it activated and ran fine, without even a single exclamation point in Device Manager. I applied the update necessary to make the Store offer 8.1 and proceeded to install it as I've done on a couple other machines. After downloading the thing, it errored out with:
Couldn't install Windows 8.1
Contact your PC manufacturer to see if you can upgrade the System BIOS
When I clicked the OK button, it then gave me the informative and grammar-challenged error box:
Something happened and the Windows 8.1 couldn't be installed. Please try again. Error code: 0xc1900104
Try again Cancel
Ever the optimist, I clicked Try again, and of course, it proceeded to download all over again from scratch, only to error out in the same way. I then downloaded all the Windows 8 updates, although just the one had been necessary on my other machines that successfully upgraded to 8.1, and tried again, only to get the same result.
Today, I've discovered the Windows 8.1 Compatibility Assistant, which avoids the lengthy download of the upgrade every time (Microsoft, maybe you should run it implicitly before downloading 3 GB of transient data), and it tells me:
This PC doesn't meet system requirements
Contact your PC manufacturer to see if you can upgrade the System BIOS
Obviously, no BIOS updates are available, and what exactly is the problem here with my BIOS. The obvious googling turned up nothing except some people with Sony Vaios that had the same problem, which was corrected with a BIOS update, and of course, there is no information on what their BIOS update does to make the 8.1 upgrade possible.
So I'm using linux on my hp laptop where was previously windows 8. I have made backup of Windows 8 with HP recovery manager on a dvd and completely formated hdd. Now I want to install windows 8 but only on external hdd. I have tried using official windows 8 iso but it says that my key cannot be used to install retail version of Windows 8.
View 2 Replies View Related