i cannot boot my asus n82jv with a UEFI usb win7 64bit. It only says:
Windows failed to start. A recent hardware or software change might be the cause. To fix this prob:
1 insert your win installation disc and restart your computer.
2 choose your language settings and then clck next
3 click repair your computer
Status 0xc0000225
Info an unexpected error has occured.
My manager a newbie to the computer world downloaded the new windows 8.1 and she didnt back up anything. She said all she did was install and clicked the microsoft agreement.
Is there a easy way to downgrade ?
Basically, I upgraded from windows 8 to 8.1 a few weeks ago and since I could barely run any games, they have compatibility issues and all sorts.
I tried updating my drivers, it says they're all up to date I spent countless hours looking for solutions on how to downgrade All the solutions require me to have a disk, but I lost it I also looked up on how to set it back to it's factory setting, but it doesn't work
I was told to press F8 or F9 (can't remember at them moment) as soon as the computer turns on until the recovery screen pops up, but it never does.
I'm using an Alienware x51. Is it even possible to reset my computer without the disk? if not, then where can i get another disk that came with the computer?
I got my new PC and wanted to downgrade to Windows 7 since it was running Windows 8 and I found it unbareable. It didnt let me run the USB on any of the advanced menus so I tried just overinstalling it so I could go back to the old menu and try it like that (windows 8 never showed the company logo when booting up, it just was a black screen til pop! it was fully loaded) so I just ran it off my USB on my computer (bootable usb) and then it went through normal installation and expanded files and wanted a pc restart. After restart it wont show up anything on my monitor... the keyboard lights up and works for a little bit. The pc runs for like a minute or 2 and then restarts when i guess it cant find the monitor signal. I installed it on the windows C: partition but not deleted or overwrited the recovery one by default.
View 2 Replies View RelatedI am having an issue with downgrading to Windows 7 and It's not nearly as easy as normally installing an OS. I get to the expanding files screen, and once the system reboots it goes back to the Windows 7 install screen. This is an issue, because it should continue with the installation.
View 2 Replies View RelatedWhen I run setup I get this message:
"Something happened, We can't tell if your PC is ready to continue installing windows 8. Try restarting setup"
What can I do?
My system:
Brand new Asus CM6870 desktop
2 TB HD
16 GB RAM
Win 8 Core (originally installed by Asus)
Motherboard; Asus P8H77-M Pro (AMI BIOS 0606)
Asus did not supply and will not supply original Win 8 media
I also purchased an OCZ SSD with the intention of moving Win 8 to the SSD. The exisiting HD is installed as a UEFI device and I wanted to install Win 8 on the SSD as an UEFI device too.
I installed the SSD on port 1 of the SATA III (AHCI). In every win install attempt I had the HD disconnected. When reconnected, it was on SATA III port 2 (AHCI).
After MANY, MANY attempts, I have Win 8 installed on the SSD and the original Windows 8 remains on the HD. I was unable to to a UEFI install, so I gave up and did an MBR traditional install. When I boot to the SSD, Windows works but I can't see the HD. When I boot to the HD, Windows works but I can't see the SSD.
To make a VERY long saga, less long, I attempted the following.....- created a recovery drive to use to do a clean install on the SSD - didn't work
- "found" original Win 8 Core media and used it to install on the SSD. (It worked but it was a MBR install. I tried this many times using both a DVD and a UEFI formatted USB drive using instructions found on this forum)
Up to this point, any time that Win 8 was installed on the SSD, I could see the HD as a secondary drive. If I booted to the HD, I could see the SSD as a secondary drive.- I then tried to clone the system using Paragaon - it couldn't see the SSD
- I then tried to clone the system using Mini Tool Partition Wizard (as recommended by OCZ) - it proceeded but failed and I got the "Starting Automatic Repair" message that froze the system. After unplugging the SSD, it booted to the HD.
- Based on posts here and other forums, I read that you could use the Windows 8 Pro upgrade to do a clean install. I bought it and upgraded my HD.
- The upgrade would not install on the SSD. It would only upgrade so I re-installed Win 8 Core on the SSD and then upgraded to Pro. (I had to add a PID.txt file with my upgrade licence to the upgrade disk.) After I did this, I could no longer see the secondary drive regardless of whether I booted to the HD or the SSD.- Then I re-installed Win 8 Core on the SSD to see if the Pro upgrade was the issue. - no change I looked in Device Manager and I don't see any errors but I don't see the secondary drive.
I'll attach jpgs of the Device Manager from both the SSD and the HD Win installation"
The SSD appears as unallocated on the HD Disk Manager even though Win 8 is working on that drive! The HD does not appear on the SSD Disk Manager.
I've worked on so many alternatives over the past week that I feel like I'm going around in circles.
I'll settle for a Win 8 MBR installation on the SSD with access to the secondard HD.
I am trying to install a new OS and I want to boot from the CD on Windows 8?
How would I do that?
So I'm using linux on my hp laptop where was previously windows 8. I have made backup of Windows 8 with HP recovery manager on a dvd and completely formated hdd. Now I want to install windows 8 but only on external hdd. I have tried using official windows 8 iso but it says that my key cannot be used to install retail version of Windows 8.
View 2 Replies View RelatedAnyways, my machine is running win7 HP with the drive bitlockered, can i just go install Windows 8 straightaway or do i have to decrypt and disable bitlocker first?
View 3 Replies View RelatedI already bought and installed Windows 8. I have a i7 laptop with 64bit proccessor but somewhat the company decided to pull it out with win7 32 bit OS. When I upgraded to Windows 8 I wanted to switch to 64bit but didn't find the option for that during the installation proccess. Can I do it now? switching from 32 to 64 (I understand that I will need to reinstall the windows again, I just don't wanna pay again for that).
View 9 Replies View RelatedI have a Windows 8 / Vista dual boot - Windows 8 on SSD on C: and Vista on HDD on D: (data only on E: ) I have not used Vista since installing Windows 8 and now want to remove to free up some space and remove dual boot
Is there an option to keep my files on the drive but simply remove the Vista OS folder and remove the dual boot option? Or do I need to follow process here and "delete volume" and then copy all the files across again from backup?
If I do need to "delete volume" my first issue is that this option is greyed out and cannot be selected for D: drive? How can I sort this? also what do I do with 11GB recovery partition and 3.54GB OEM partition?
pic attached (hopefully)
I bought an upgrade version of 8.1 Pro from my university, so I need to have an os installed before upgrading. However, I want to install it on my new PC, which means I have to install Win7 before upgrading. I wanted to know if I can install win7 and immediately install the upgrade, or is it better to go to windows update and install all the updates before upgrading?
View 3 Replies View RelatedI updated my windows 8 os to windows 8.1 via windows store and now my laptop slows up. Booting takes a couple of minute around 3-5 then loading apps also now takes a minute to load and in gaming i sometimes have fps drops which i dont have in windows 8
And i find this "refresh" in the setting which says that it will refresh my laptop back to default. Does this mean that this will restore back the default os which my laptop comes with (windows 8 single language)?
it also states that "GO TO STORE TO REINSTALL WINDOWS 8.1 and YOUR APPS" (does this actually mean that windows 8.1 will be uninstalled/ removed?
have Acronis 2013 Plus. What I am trying to do is image the disk of a Windows 7 machine (source) to a machine that had Windows 8 pre-installed (target - Gateway SX2110G).
I connected the Windows 7 drive to the new machine (USB data cable), disabled Secure Boot, and enabled Legacy. Booted to True Image and started the cloning of the drive. Everything seemed to go ok, but as soon as it starts to boot Windows 7, it gives a 7D BSOD. (the same BSOD it gives when I simply plug the source hard drive into the target and try to boot from it).
The source HDD (win 7) boots fine in its original machine.
*I tried the startup repair that's included with the image.. does it matter if I use the one from a disc instead?
I am having problems installing UEFI & a Error 0x80004005 with Windows 8.1 OEM saying it can't create partitions for UEFI then creating 2 partitions for MBR installation instead. This using a 400 TB, hard drive, setup with a GPT system & nothing else & ready for Windows 8.1 to create the partitions.
The first time it happened I used MiniTool Partition Wizard Professional, to delete the partitions created by Windows 8.1 & convert the MBR to GPT, then used Wipe Disk function to erase all data and set all the bits to a 1.
The only thing that I can think is upsetting the installation is that I have left the other drives in the system including 1x3 TB drive, 1x2 TB drive and a second 4 TB drive.
The 2 TB drive has "Win 7 Ultimate" installed using MBR, the 3 TB drive is empty but ready to install Windows 8.1 setup with GPT, and the other 4 TB drive has a UEFI Windows 8.1 installed but broken.
I have also tried to install UEFI Win 8.1 on the 3 TB drive but it failed with the same error code as above.
This UEFI takes a lot to get ones head around dose't it, and me being much older than I once was makes it even harder. I have tried this installation at least 3 to 4 times now and doing these "Wipe Disk Functions" every time has so far lost me 3 whole days just in wasted time.
I want to upgrade from Windows 7 64 bit Home edition - To Windows 8 64 bit Home Edition.
I currently have my windows 7 installation on drive C (64GB SSD)
My user profiles, Data and programmes are stored on Drive E ( 1TB HDD )
If i use the windows 8 upgrade option - What will happen?.
Is it possible to upgrade from Windows 8 32bit to Windows 8 x64bit or trick the PC into thinking its x64bit so I can install x64bit programs
View 3 Replies View Relatedis there any way to downgrade from win 8.1 to 8? Without losing my data? I want my windows 8 back so desperately, I feel very frustrated with windows 8.1 which doesn't supports many of my apps.
View 9 Replies View RelatedI was installing Windows 8 at my desktop pc.Suddenly power cut occured and it caused the compute to shut down.Then when I restarted my pc again a messege appeared saying that the installation has been corrupted and it can't be continued and it doesn't log on.After that when I tried to re-install Windows 8 the setup got stuck at the "setup is starting" window.I waited overnight for it to go and the installation to start.But it doesn't happen.I have tried to re-install several times but the same problen happens again and again.So neither I can log into my computer now nor I can re-install windows.I don't know what to do.
View 9 Replies View RelatedI much prefer WMP 11 but I can't seem to fire it up on Windows 8.
View 9 Replies View RelatedI was looking around the settings and found add features. I did that and set it up. I now started it and it says I am unable to activate it, so I would like to remove it and just go back to 8.1.
P.S. I know it's possible to activate it using a program, but I support Microsoft and would like to acquire it legally.
Can I use the system backup I created in win7 to downgrade from Windows 8? I clean installed win 8 on my other laptop I didn't get the chance to get the win7 key because it came preinstalled. Or, is there any other way to get back to win7 without having to buy it.
View 3 Replies View RelatedI recently upgraded my HP Pavilion m6-1000 to windows 8 from windows 7 using windowsupgradeoffer. Since then, I have only experienced bugs and problems with my computer so I want to downgrade to windows 7. I didn't get a recovery disc when I bought the computer, but I have a recovery partition on the computer, called "Recovery (D:)". I also have the product key for windows 7
I have read that it is possible to downgrade using this partition
I need to downgrade and in my search for a way to return to windows 7 Ive come across these downgrade rights for windows 8 professional. My thoughts are to upgrade to pro using my school email for $40 then downgrading to 7 but I dont see mention of this option to downgrade anywhere. This seems like my cheapest option, otherwise I will have to buy a copy of 7 brand new and do a clean install. Is the option to downgrade only available on machines with Windows 8 Pro preinstalled, and if so why?
...and yes, im sure I want to go back to 7 as the programs I use most frequently for school and are given to me by my university only work on windows 7.
I want to try the 8.1 update on my XPS 15, but I'm not sure if everything will work flawlessly.
Just in case something goes wrong, I want to switch back to 8.
So, is it possible to "downgrade" using a system restore point (from Windows 8)?
I purchased a new Lenovo y50-70 laptop (non-touch) a month ago, and have been enjoying it for a while, but Windows 8 was becoming a huge problem, and generally I just like Win7 better, so today I decided to downgrade. I followed this tutorial here: Downgrade Windows 8 to Windows 7
Everything was running pretty smoothly, I downloaded the Win7 ISO from here: Windows 7 Direct Download Links, Official Disk Images from Digital River
The specific file was "Windows 7 Home Premium x64 SP1 U (media refresh)"
I have a copy of Windows 7 OEM edition from building a PC, but I decided to download the ISO for the sake of the guide.
Back on track, everything was running pretty smoothly except for one error, I forgot to enable Legacy Mode in BIOS, which I did then was excited when I finally got the Windows 7 installer to load completely (it had been freezing on the "Starting Windows screen as a result of Legacy Mode being off) until I hit the drive management section. In the screen, I saw 2 drives, Drive 0 (931.7 GB) and Drive 1 (7.5 GB). As per the guide, I launched a command prompt (Shift-F10), DISKPART, DISK LIST, SELECT, and CLEAN'd both of them. Then, when I selected my 931.7 GB drive I was presented with the Error: "Windows is unable to install to the selected location. Error:0x803000001" I tried creating new drives, formatting, but no matter what I got the same error.
Googling around, I looked for answers and one man said to turn off and back on into BIOS, then make sure my drives were in the right order, then attempt again. I booted into BIOS, made sure my drives were in order, then rebooted, hit F12, selected the USB, and then got into prompt of text, where my computer then rebooted, and now I am stuck in a boot loop.
In BIOS, I recieve no list of drives under the UEFI section, only under legacy are 3 drives listed, my SATA drive, my USB, and some network function.
My application s/w runs only on ie8, how to downgrade from ie 10 to ie 8 in windows 8.
View 3 Replies View RelatedI downgraded this laptop from 8 to 7. The only driver I'm having problems is the USB controller.
I went to the HP we site and selected the Windows 7 driver but I get an error:
(This computer does not meet the minimum requirements for installing the software.)
I have downgraded many machines now and this is my 2nd one that I have had issues. My last computer I had to grab drivers from a computer that was close to the same model.
I tried the programs DriverMax and Slimdrives and they found an USB controller driver that seemed to work but when I plug in the flash drive it does nothing.
Here: [URL] .....
Somewhere in that link it says:
During POST enter "BIOS Boot Selector Menu" by pressing F7.
Intel says: <F7> No uefi setup option in boot selection
Others say: <F8> No uefi setup option in boot selection
I say: <F12> No uefi setup option in boot selection
Lenovo Z580, my brand new laptop that is, its UEFI based and vymrdal's ISO from MSDN is also created to be installed as an UEFI Install.
Here's my issue; I am a math and science teacher in a public middle school and am outfitting my class with thirty brand-new Lenovo touch computers. I consider myself above-average savvy with computers, having worked with every version of Windows extensively since the late 80s and DOS. The only OS that I haven't spent much time on is Windows 8.
These computers are all brand-new and of course have legal copies of Windows 8 -- irritatingly, though not yet updated to 8.1. Soo...It took me a larger part of one day just to get ONE of these computers ready for class use. It involved several stages of the Windows update/reboot dance, followed by removing myriad unneeded bloatware applications, setting up multiple child accounts on the machine, and finally installing some freeware educational materials needed for instruction. It was all unbelievably tedious!
I turned around and look at all the remaining twenty-nine computers with dread. Obviously I'm trying to work out some kind of shortcut to avoid having to spend my whole summer updating each of the new machines individually. In an ideal world, I would make some sort of image of the machine that I just spent several hours updating/configuring, and then replicate that across the other twenty-nine. In terms of hardware, this shouldn't be a problem since all of the machines are exactly the same make and model. But I anticipate other problems such as, for example, the serial number of the Windows version and the computer name will then be the same on all the machines and have to be adjusted. There very well could be other issues with replicated serial numbers, etc.
I'm thinking maybe I just have to bite the bullet and work at each individual computer one of the time. And then image them individually so that when the kids mess around with them, I can do an easy restore. How I could make this work?