Setup Installation :: Windows 8 Installation Stuck At Setup Is Starting Window?
Mar 11, 2014
I was installing Windows 8 at my desktop pc.Suddenly power cut occured and it caused the compute to shut down.Then when I restarted my pc again a messege appeared saying that the installation has been corrupted and it can't be continued and it doesn't log on.After that when I tried to re-install Windows 8 the setup got stuck at the "setup is starting" window.I waited overnight for it to go and the installation to start.But it doesn't happen.I have tried to re-install several times but the same problen happens again and again.So neither I can log into my computer now nor I can re-install windows.I don't know what to do.
View 9 Replies
ADVERTISEMENT
Aug 31, 2013
Im trying to install Windows 8 (Not 8.1) but it gets stuck at the booting screen (Where setup shuold load files)
My system specs are on my profile.
View 3 Replies
View Related
Jun 5, 2014
In Windows 7 I could adjust the thickness/width of the windows borders.
In Windows 8 I could not find this option in
Personalization-->Window color and appearance-->Advanced appearance any more.
View 1 Replies
View Related
Jan 26, 2014
I'm trying to install Windows 8 on my pc (hp pavillion g6) which its hdd is completely empty; but it gets stuck on expanding files at 98%
I'm installing it via dvd
View 2 Replies
View Related
Jul 29, 2013
I have recently formatted my old windows. But now I am not able to install windows 8(actually even windows XP and seven) . When I try to boot from USB setup starts But 'Getting files ready' (which is second step of installation) stucks at midway like at 14% or 52% or 74% i.e. at any arbitary percentage and nothing happens . Actually I am able to move my cursor but installation no more proceeds further . I have tried to format many times and to run installation but everytime installation stuck at midaway without any error .
My laptop specs are : Acer aspire 5745 , 500GB HDD , 3GB RAM , intel core i3 processor
View 9 Replies
View Related
May 8, 2014
I've purchased my Lenovo Twist (came with Windows 8.0) about a year ago and I've upgraded to windows 8.1 when it was released in the windows store. Months after I upgraded I ran into a few problems, I was unable to access apps on my metro screen. None of the solutions worked so my only choice was to refresh or reset. I've tried going into the recovery option on boot and the refresh option on the settings both said I needed installation media. I was unable to create a recovery media because the checkbox was grayed out on the "Create a Recovery Drive".
After doing some searching I decided to download the evaluation copy of windows 8.1. I extracted the Install.wim file and set it as my OS image on reagentc.exe. I was still unable to refresh because it said "The drive where windows is installed is locked". The reset option worked, after I completed the reset I was expecting it to bring me back to windows 8.1 instead I was on the evaluation version.
I also noticed that the F11 option on boot disappeared after the reset.
View 5 Replies
View Related
Jun 7, 2013
Using Windows 8 Pro: Why when I click on any of my folder shortcuts on the desktop, my windows, such as My Documents, open in a little (approx) 4" x 4" window instead of a full window. How to get them to open in full windows.
View 1 Replies
View Related
Sep 15, 2014
computer specs, GeForce GTX 760 and i5-4670k CPU. MSI Z97-G45 Gaming Series motherboard. 2tb hdd. finally was able to get my new copy of windows 8 to boot from the cd drive. now when i try to install it, (no current operating system is on this hard drive) it keeps getting stuck before it finishes completion. says install failed. think it slugs out at 56%. tried running it 2x same thing. what i could do to make it finish the install?
View 4 Replies
View Related
Jan 27, 2014
I recently decided to buy an ultrabook and I got me this one: LG Z360-7416, with a ssd and windows 8 (x64). As usual, it came with a lot of garbage installed which was using almost half of the ssd storage (128GB), so I decided to do a clean install. I got me a msdnaa copy of the windows 8.1 pro (x64). So, i used a pendrive to boot up on UEFI mode and selected custom install and when i get to the select partition, it shows everything fine, i select a partition and when a click on install, it returns an error saying it cannot install on my partition (i dont remember exactly what it says), and when i click on refresh, all my partitions vanishes, even going into the prompt and using diskpart doesnt show my partitions anymore. I tried to load some drivers, but it didnt work.
I was only able to install windows 7(x64), where nothing of these things happens, it installs realy easy. I tried to install windows 8 from windows 7, like an upgrade, but after it restarts, it gets stuck also. My disk is formatted on GPT, as im using EUFI on my windows 7 installation.
Tried almost a hundred times using all solutions i found online, but always the same result. And to get even more weird, some rare times it gets to the installation part, where it says the progress, but stays on 0% of unpacking files...
Its seens to be missing some especific driver to windows 8 be able to work with my ssd, but i cant get it right, but if it came installed with windows 8, it must be a way to make then work together.
Unfortunately i deleted the recovery partitions, so im stuck on windows 7.
View 1 Replies
View Related
Sep 1, 2013
I did a PC Refresh and Reset and it's stuck at 1%
View 3 Replies
View Related
Jan 31, 2013
I am trying to upgrade my sons win 7 32 bit to windows 8 32 bit he had bought a few days ago.I have tried 5 times .All 5 times it installs fine and reboots and gets to the point where it says 89% getting ready it then reboots and crashes with a blue screen from windows 8 ,the new one.What could be the problem, I have tried no startup items,checked off hide Microsoft services and disabled the rest.The mobo is a Asus P5LD2 . I am all up to date with windows also in win 7.
View 1 Replies
View Related
Oct 23, 2013
I have an HP p6720f that came with Windows 7 installed. I upgraded to 8 with no issues around December of last year.
I downloaded 8.1 from the Windows app store without problem. I tried the first install without changing anything (for some reason, I just thought it would work). It got to "Setting up a few more things 59%" and stayed there. For 6 hours. I finally powered it off and went through the restore process. My error code was 0xC1900101 - 0x4000D.
After some reading I tried again, this time unplugging everything but the mouse and keyboard. I made sure I had all the latest updates from Windows and all my drivers were updated. Uninstalled a couple of programs that the compatibility checker said were not compatible (old version of Yahoo Update, an old baseball game). I cleared the Windows Store cache and disabled Windows Defender and Firewall. I did a clean boot and started the upgrade process over again. Same thing. Stuck at "Setting up a few more things 59%". Started the upgrade at 8pm, checked in the morning around 7am with no change. Came back around 1pm and still no change - 59%. Over 15 hours and still, the upgrade failed.
I gave up and used Microsoft remote tech support. The guy ran a check disk thing that scanned for errors. No errors. He then did some sort of network scan or repair, not entirely sure. It took a long time. He started the upgrade. Stuck at 59% once again. They called and took control of my computer. This time only checking Windows Update to make sure there were not updates to install, then went right into the 8.1 upgrade. I knew this wouldn't work. Same result.
For my most recent attempt I did a system refresh (under PC settings, General). This got rid of all my apps and installed programs, but kept my personal files. I was sure this would work. Nothing left to cause any issues. But again, hung on "Setting up a few more things 59%" overnight (8+ hours).
When it's stuck there, the circle/dots are moving like it's working. My activity light starts out doing a short, regular blink, then just doesn't do anything.
What else can I do? I don't NEED to upgrade to 8.1, but i should be able to. And it shouldn't be that complicated.
View 3 Replies
View Related
Sep 15, 2014
I'm working on a Toshiba L75D-A7283. Upon checkin, symptoms were booting up to a black screen to log in, then a black screen with cursor after that. Fixed that with a system restore point and a virus removal.My coworker upgraded the machine to 8.1 over the weekend without a Microsoft Account. When it failed, he put the machine into audit mode, I'm guessing so that we could have updates finished and have the system set up with a Microsoft Account when the customer came back in.
However, we can't get it out of audit mode. We've tried several things, including this:Sysprep Error with windows 8.1 At the setupact log, the error that presents is: spopk.dll: Sysprep will not run on an upgraded OS. You can only run Sysprep on a custom (clean) install version of Windows.
At that point the sysprep fails, and I'm stuck in audit mode after a restart. I don't know how to get this machine back to vanilla Windows 8 without a full reinstall.
View 7 Replies
View Related
Aug 12, 2014
For some odd reason my laptop decided to not boot into windows anymore; It would be stuck "boot looping" with my MSI laptop logo and a loading sign (rotating circle). I had Kali Linux and Windows 8 installed on the laptop and neither one would work. So I formatted the entire HDD with all 3 partitions, windows partition, even my storage, and kali's partition because the automatic repair wouldn't work as well; it'll be stuck on Preparing automatic repair and wouldn't get past that screen. I have formatted my HDD with my other windows 7 machine by just right clicking -> format.
I have downloaded a torrented version of Win 8 iso (just for the purposes of installation, my laptop came with a Serial # and I have purchased an product key only version as well). I have burned a DVD of win 8 via winISO and changed my boot options to boot from DVD as well.
Now my problem is, when I am prompted to press any key to boot from CD/DVD and I press a key I am redirected to Preparing Automatic Repair and back to square one of my problems. I believe the recovery/backup partition is still on there.
I have tried being in both LEGACY and UIEF. UIEF sends me to Preparing Repair and LEGACY takes me to the windows 8 logo with the rotating circle underneath with nothing after that (not sure if it takes a VERY long time or not)
New laptop MSI ge70
View 1 Replies
View Related
Sep 15, 2014
I need to change some setting in my UEFI/BIOS but it is stuck in ready only mode. All options are blanked out except for "exit". How can I get it to let me edit the settings again?
View 9 Replies
View Related
Nov 5, 2013
I bought a Win 8 Pro 64 bit upgrade dvd in order to upgrade from Win 7-64bit. After completion I downloaded win 8.1 pro upgrade from the store. At the end of the installation it says "getting devices ready". It starts the process showing the rate and it gets stuck at 6%. Turned off the laptop (by disconnecting power and battery) and got the following message:
".......... Could not complete the update to Win 8.1 ......... error 0x1900101-0x30018 "
I tried to install this upgrade a third time to no avail.
I checked that I got all the win 8 updates.
I did a system restore.
I updated the nvidia driver.
I checked the requirements, including CMPXCHGb support in my 64bit version, by using Coreinfo.exe.
View 4 Replies
View Related
Sep 15, 2014
I have a HP Envy 4 Ultrabook and I want to install Windows 8 from scratch, I put the installation files on a flash drive from a DVD of Win 8 I had, but when I go to install it, it says the "We couldn't find any drives". I have tried using DiskPart within the CMD as well, but it only finds my flash drive when I run list disk. Also, my drives are completely formatted, and I accidentally wiped the recovery partition. I tried with a USB of Win 8 Pro, and it was fine, showing all of my drives correctly, but that version is linked to another PC, so I can't install it. Also, I booted into a Linux Mint live CD and tried to install it, it sees my hard drive correctly, but the Windows install does not, I can't figure this out, never encountered it before. Is Linux my only option at this point?
View 1 Replies
View Related
Oct 18, 2013
I am trying to upgrade from windows 8 pro to windows 8.1 on a samsung laptop. The download completes and installation starts.
After a while the following message appears "you cant install windows on a usb flash drive with setup"
I am not actually trying to install to a flash drive. I contacted Microsoft and after 5 hours they said that I should connect to the internet with a cable and not by wireless in order to solve the problem (this didn't work of course and I had told them that it was an install problem and not a download problem).
View 2 Replies
View Related
Jan 27, 2014
Until very recently i was running Windows 8 with a 240 GB Sandisk SSD as a primary and a 2 TB Western Digital Green HDD as a storage. I decided to set up a RAID 1 setup so i purchased a second 2 TB HDD and installed it.
My intent was to run windows 8 off the 240 SSD as a primary and have a RAID 1 setup for my 2TB HDDs.
I learnt that my data configuration was set to AHCI. I decided to do a complete clean install and change the sata configuration in BIOS to RAID.
After successfully creating a RAID volume using my 2TB HDDs i proceeded to install Windows off my primary. I am however having difficulties in that it will not allow me to install windows on either drive.
View 3 Replies
View Related
May 11, 2014
I am trying to setup a new Windows 8 computer that is going to be a gift. I need to go through the setup procedure so I can install some software which is also part of the gift. How can I do this without having to use a Microsoft account, or at least with leaving the least amount of account remnants for the new user?
View 2 Replies
View Related
Apr 10, 2014
I have tried updating my Windows 8.1 Pro (64-bit, upgraded from Windows 8 Pro) with the new "Update 1" (KB2919355) but it always fails with ERROR code 8007005 (or 80073712).
What I have tried do to fix:
Run WindowsUpdateDiagnostic (that e.g. removes files from C:WindowsSoftwareDistributionDownload and cleans Windows update history metadata info)DISM.exe /Online /Cleanup-image /ScanhealthDISM.exe /Online /Cleanup-image /RestorehealthDISM.EXE /online /cleanup-image /startcomponentcleanup
After all of this, still the update (KB2919355) fails
There must be something that Microsoft needs to fix, there are xxxxxxxxxxxx amount of similar complains and reports out there...
View 9 Replies
View Related
Sep 12, 2013
I decided to install Win 8.1 RTM x64 yesterday but what I expected to be a breeze turned into a nightmare. Installation fails, I am even unable to get into Safe Mode.
I was running Win 7 Ultimate x64 before without any issues whatsoever.
I already described my issues here, with errors and logs: Windows 8.1 RTM installation fails on Dell XPS 1340
Changed memory from 2x4GB to original 2x2GB but completely same issue
View 9 Replies
View Related
Jan 19, 2013
I have Windows 8 consumer preview installed on my laptop. A couple days ago its licence expired, so I got Windows 8 professional to upgrade.
I made an install USB with the win7 USB utility and proceeded to boot from the stick. The setup then told me I should restart my pc and restart the installation from windows.
I did that, but Windows 8 setup won't start. It just starts reading from the usb for a second, then stops. The setup from the .iso I downloaded does the same thing.
To make things more interesting, the first time I restarted my PC after trying to upgrade windows from USB at start-up, I ran Windows 8 setup and it did start and started doing some things, on that small blue screen that pops up. I didn't pay attention to it until the blue setup screen disappeared and nothing else happened...
One more thing, I tried to install Microsoft windows server 2012 on my laptop a month ago and the same thing happened with the setup.
Did a few hours of research on the internet, tried to run it in compatibility mode.Can't really afford to do a "clean" install now, and on top of that, my PC reboots every 2 hours because my licence is expired...
View 9 Replies
View Related
Jun 23, 2013
I have an ASUS mother board and don't use an graphics card.
I had two monitors and an HDMI cable plugged in. The short story is that the Intel drivers seem to get lost.
Windows installed normally until it went into to the final setup.
The program will switch to another screen at this point and picked a monitor and the HDMI to TV connection.
Unplugging the HDMI cable allowed me to finish.
View 4 Replies
View Related
Sep 2, 2013
Windows 8.1 RTM installation says (Display) not supported
1. I tried with windows 8 x64 RTM upgrade,it started and after restart it displayed display not supported
2. So I tried with windows 8.1 x64 beta upgrade still same msg,so itried updating all display drivers and other driver and tried again still same message
3. So tried clean install with windows 8.1 RTM, still same msg diplay not supported
Config details
Acer x153W monitor
Gigabyte B75M D3H motherboard
Intel core i3 3220 ,4GB RAM sandisk
Intel HD graphics 4000
Windows 8.1 x64 RTM
View 8 Replies
View Related
Jan 14, 2013
I just finished building my computer. Clean SSD and HDD.
I boot on USB with Win 8 in it.
I go through with it, installing on partitioned first and after failing that on unallocated space.
Both ways result in the installer preparing files, going through everything fine. Then at the end of that window my computer restarts and starts the whole set up all over again.
I can install Windows 8 in my SSD, right?
View 2 Replies
View Related
Oct 23, 2013
I'm currently using windows 7 and want to install 8.1
I just launched the setup, and on the window where it asks what to keep, the only option is 'Nothing'.
Does windows 8.1 setup delete everything I've got on my current partition, or will it transfer my current system into a windows.old folder like Windows 7 Setup does?
Because I really need to keep my files.
View 1 Replies
View Related
Jan 17, 2014
I previously setup a DVP 11 pro tablet by logging in with my outlook.com email account.
Now I am about to setup an AIO desktop . So I am sure the same questions will be asked about logging in with email account and password when first powering up the computer.
My questions are:
a) Should I use the same outlook.com email and password for the second computer as the first ? Will Win 8 even accept this because one tablet is already setup using this same email address and pw . Even if it accepts what are the implications?
b) I would prefer not to sync the Tablet and the AIO computer . In this case should I setup another outlook.com account with separate email address and PW? I guess I can do this by clicking on setup a new account .
c) Actually I would prefer to setup the 2nd computer with local account . But from my experience with the DVP 11 Pro , this option is not available in the setup screens. ie I can't get pass the the first screen that asks for email and password. Since this is a purchased machine and not a clean install , I believe the only way to do this is to first setup with an email account then subsequently disconnect and setup local name and password.
View 4 Replies
View Related
Jan 6, 2013
Here: [URL] .....
Somewhere in that link it says:
During POST enter "BIOS Boot Selector Menu" by pressing F7.
Intel says: <F7> No uefi setup option in boot selection
Others say: <F8> No uefi setup option in boot selection
I say: <F12> No uefi setup option in boot selection
Lenovo Z580, my brand new laptop that is, its UEFI based and vymrdal's ISO from MSDN is also created to be installed as an UEFI Install.
View 3 Replies
View Related
Jun 19, 2014
Here's my issue; I am a math and science teacher in a public middle school and am outfitting my class with thirty brand-new Lenovo touch computers. I consider myself above-average savvy with computers, having worked with every version of Windows extensively since the late 80s and DOS. The only OS that I haven't spent much time on is Windows 8.
These computers are all brand-new and of course have legal copies of Windows 8 -- irritatingly, though not yet updated to 8.1. Soo...It took me a larger part of one day just to get ONE of these computers ready for class use. It involved several stages of the Windows update/reboot dance, followed by removing myriad unneeded bloatware applications, setting up multiple child accounts on the machine, and finally installing some freeware educational materials needed for instruction. It was all unbelievably tedious!
I turned around and look at all the remaining twenty-nine computers with dread. Obviously I'm trying to work out some kind of shortcut to avoid having to spend my whole summer updating each of the new machines individually. In an ideal world, I would make some sort of image of the machine that I just spent several hours updating/configuring, and then replicate that across the other twenty-nine. In terms of hardware, this shouldn't be a problem since all of the machines are exactly the same make and model. But I anticipate other problems such as, for example, the serial number of the Windows version and the computer name will then be the same on all the machines and have to be adjusted. There very well could be other issues with replicated serial numbers, etc.
I'm thinking maybe I just have to bite the bullet and work at each individual computer one of the time. And then image them individually so that when the kids mess around with them, I can do an easy restore. How I could make this work?
View 3 Replies
View Related
Feb 9, 2013
When I run setup I get this message:
"Something happened, We can't tell if your PC is ready to continue installing windows 8. Try restarting setup"
What can I do?
View 3 Replies
View Related
