I have an ASUS mother board and don't use an graphics card.
I had two monitors and an HDMI cable plugged in. The short story is that the Intel drivers seem to get lost.
Windows installed normally until it went into to the final setup.
The program will switch to another screen at this point and picked a monitor and the HDMI to TV connection.
Unplugging the HDMI cable allowed me to finish.
Just reinstalled Windows 8.1 and can't figure out what the deal is. I have a four monitor setup, and all of this worked perfectly before I reinstalled. I actually remember dealing with this issue before, but I couldn't remember how I fixed it.
Basically, with two monitors, everything works perfectly. The minute I connect my third monitor, it's like all the screen flicker, and then I get logged out and back to the start screen.
I've tried updating nvidia drivers but it doesn't work.
My setup is :-
Windows 8.1, 64 bit;
Asus RAIDR Express PCIe SSD;
Asus GT630-SL-2GD3-L GPU;
Asus SABERTOOTH Z97 MARK 1 Motherboard, BIOS version 0602, (the first version).
I have two monitors, a Dell u2412m which is plugged into the DVI socket on the GPU, and an iiyama XB2776QS which is connected to the DisplayPort socket on the motherboard. This was the only way I could find to get each monitor to use the maximum resolution it is capable of.
Whenever I open a program I have no idea on which monitor it will be displayed, sometimes a program will display in the iiyama, but the next time I open it I can see it on the Dell. I also find that if I switch the monitors off for a few hours, the next time I switch them on the programme might be displaying in a different monitor.
I am not sure if this is because I am not using the new, horrible, Metro style which Microsoft thought to introduce, or something else. I did try a piece of software called MurGeeMon, but this did not solve the problem.
Could it be because one of my monitors is connected to the GPU and the other to the MoBo?
I've been looking at some of the MATROX graphic cards for multi-monitor output -- up to 8 possible !!
Now any decent software to run these -- the standard software seems OK at running TWO monitors but I want to be able to run several more. You can run more but it gets a bit complicated managing this from within the standard windows system itself.
Five Best Tools for Managing Your Multi-Monitor Setup
After sorting out my problem installing multiple Hard Drives and getting past that I am now faced with another problem, which is that no screen is displayed on start-up to allow selecting other drives to boot from.
I can select other drives to boot from if I boot up into the default drive and select "Change PC Settings" but that is very slow and allows mistakes if one is tired.
I think the reason for the problem is because I installed all the drives on their own separately (took out the other drives) and they are now all installed properly except for this problem.
I only need to boot from the default drive when I need to do something with that particular drive or to boot from "Windows 7 Ultimate" I tried to fix the problem with Drive Freshen (I think its called) but that didn't work.
Is there a way to fix this problem and have the screen that offers to allow booting from another drive added to the default drive, without doing a total re-install?
On a multi boot system it is the first screen to display before booting the OS, and shows all the installed Drives in boxes with their names (labels) on, so that you can choose which Drive to boot from..
When moving my cursor between my two monitors, it stops at the border. To get to the other screen I either have to keep moving my mouse towards the border or move the cursor at high speed between the two. The issue occurs no matter where I cross, and does not appear to be related to the metro charms or multitasking.
My desktop just recently installed the Windows 8.1 Update (Pro 64-bit), and since then I have had this problem off and on. I do not know what causes it to happen. I have two monitors, side by side. A 1050x1680 monitor on the left, with a 1920x1080 monitor on the right. The top edges of these monitors are aligned.
This phenomenon is incredibly annoying, so any methods of stopping. I'd also be interested to know how and why this happens.
Currently, I run Windows 7 Pro on dual 24" monitors, and life is good.
In Win 8, if I open the desktop tile, I presume that the default action is to open the full-screen desktop app on just 1 of the 2 monitors. I'm guessing that the "Start" screen remains on the 2nd monitor.
Can I have the desktop app open, full screen, across both monitors? Can I have icons for my so-called legacy programs littered across both monitors like I have them on the Win 7 desktop? Just to clarify, I am NOT asking about having the background wallpaper extend across both monitors. I want the actual desktop application to extend across both monitors.
I have two monitors. Some of my programs can take the whole screen, covering up everything including the task bar. In W7, I just used the MS clock gadget which I moved to the second screen so I could always see the time. Now in Windows 8.1 Update, I can see all the apps that I've pined to the active task bar, but I don't see the system tray with the time to the right. Doesn't have to be the task bar, of course -- could be a floating clock in the upper right or left or anywhere you like.
View 1 Replies View RelatedI have a brand-new HDCP supporting monitor (native resolution 1920 x 1080,) on which I play the latest blu ray movies from the computers built-in blu ray drive, and a 9 year old flat screen non-HD plasma TV (on which I watch You Tube, BBC iPlayer and 4OD, streamed from the PC via a VGA cable,) both connected to my GT610 NVidia graphics card.
It seems I can only get them at the same resolution. My desktop does however have it's own on board graphics processor. Is it possible to run these two devices at different resolutions? (Since the ancient flat screen can only handle resolutions up to 1600 x 1200.)
ASUS P8 Z77-V LK mobo has 1 each VGA, HDMI, DVI-D & Display
At first I was not confused thinking I could use VGA or DVI for my monitor and HDMI or VGA for my TV
Then I started reading about 'Display Port' and confusion set in.
1. -> Can I just use HDMI & DVI off the board at the same time to use 2 monitors ?
2. -> or Do I have to use an adapter and 'Display Port' for the 2nd monitor ?
I have just rebuilt my PC and decided to make the jump from Windows XP to Windows 8. The jump has not been smooth, but it looks like I have ironed out my biggest problem (incorrect installation due to not creating a system partition therefore Windows 8 = no DVD, no boot; rookie error).
Now I am stuck with an issue - windows detects my only screen as more than one. Sometimes it thinks I have two, more often it thinks I have 3 or 4. Installing the current nVidia drivers did not work.
What I have at the moment is 2 generic non-PnP monitors and 2 generic PnP monitors detected, according to device manager. nVidia control panel calls them Dell SX2210, VGA display, (i can't recall the 3rd one, I'm on my laptop now), and TV. Windows display setup calls two of the SX2210, and the other two are either generic non-PnP or PnP monitors. In nVidia control panel it looks as though I have a clone setup (2 screens enabled) with the Dell SX2210 and the VGA display. In windows display setup it looks as though I have a clone setup (2 screens enabled) with Dell SX2210 and generic monitor.
I have repeatedly unchecked the secondary monitors in both nVidia control panel and windows display setup, leaving me with what should be a single monitor arrangement and 3 disabled monitors. This works until I restart my computer, which then reverts back to what it was before. This is OK as a workaround most of the time, but sometimes when I boot up the computer it detects the wrong screen as the primary and I get a monitor which goes to power save mode. The solution to this is Win Key + P and change the display selection while blind, which works now I know how. Sometimes my screen will refresh (installing programs or drivers) and I get the same result. Detect displays also results in no signal to my monitor.
Currently using DVI from the graphics card to DVI on the monitor.
System specs:
CPU: Intel 3570K (stock clock)
MB: ASRock Extreme4 Z77
RAM: 4 x 4GB 2133 GSkill
VIDEO: Gigabyte GTX260 OC
MONITOR: Dell SX2210 @ 1920 x 1080
OS: Windows 8 64bit
*Yes I know the 260 is an older card, it has come from my old system for economics reasons (to be upgraded later), but it was working perfect on that machine.
I was installing Windows 8 at my desktop pc.Suddenly power cut occured and it caused the compute to shut down.Then when I restarted my pc again a messege appeared saying that the installation has been corrupted and it can't be continued and it doesn't log on.After that when I tried to re-install Windows 8 the setup got stuck at the "setup is starting" window.I waited overnight for it to go and the installation to start.But it doesn't happen.I have tried to re-install several times but the same problen happens again and again.So neither I can log into my computer now nor I can re-install windows.I don't know what to do.
View 9 Replies View RelatedI have a HP Envy 4 Ultrabook and I want to install Windows 8 from scratch, I put the installation files on a flash drive from a DVD of Win 8 I had, but when I go to install it, it says the "We couldn't find any drives". I have tried using DiskPart within the CMD as well, but it only finds my flash drive when I run list disk. Also, my drives are completely formatted, and I accidentally wiped the recovery partition. I tried with a USB of Win 8 Pro, and it was fine, showing all of my drives correctly, but that version is linked to another PC, so I can't install it. Also, I booted into a Linux Mint live CD and tried to install it, it sees my hard drive correctly, but the Windows install does not, I can't figure this out, never encountered it before. Is Linux my only option at this point?
View 1 Replies View RelatedI have tried updating my Windows 8.1 Pro (64-bit, upgraded from Windows 8 Pro) with the new "Update 1" (KB2919355) but it always fails with ERROR code 8007005 (or 80073712).
What I have tried do to fix:
Run WindowsUpdateDiagnostic (that e.g. removes files from C:WindowsSoftwareDistributionDownload and cleans Windows update history metadata info)DISM.exe /Online /Cleanup-image /ScanhealthDISM.exe /Online /Cleanup-image /RestorehealthDISM.EXE /online /cleanup-image /startcomponentcleanup
After all of this, still the update (KB2919355) fails
There must be something that Microsoft needs to fix, there are xxxxxxxxxxxx amount of similar complains and reports out there...
I decided to install Win 8.1 RTM x64 yesterday but what I expected to be a breeze turned into a nightmare. Installation fails, I am even unable to get into Safe Mode.
I was running Win 7 Ultimate x64 before without any issues whatsoever.
I already described my issues here, with errors and logs: Windows 8.1 RTM installation fails on Dell XPS 1340
Changed memory from 2x4GB to original 2x2GB but completely same issue
I'm trying to install Windows 8 on my pc (hp pavillion g6) which its hdd is completely empty; but it gets stuck on expanding files at 98%
I'm installing it via dvd
I have recently formatted my old windows. But now I am not able to install windows 8(actually even windows XP and seven) . When I try to boot from USB setup starts But 'Getting files ready' (which is second step of installation) stucks at midway like at 14% or 52% or 74% i.e. at any arbitary percentage and nothing happens . Actually I am able to move my cursor but installation no more proceeds further . I have tried to format many times and to run installation but everytime installation stuck at midaway without any error .
My laptop specs are : Acer aspire 5745 , 500GB HDD , 3GB RAM , intel core i3 processor
Windows 8.1 RTM installation says (Display) not supported
1. I tried with windows 8 x64 RTM upgrade,it started and after restart it displayed display not supported
2. So I tried with windows 8.1 x64 beta upgrade still same msg,so itried updating all display drivers and other driver and tried again still same message
3. So tried clean install with windows 8.1 RTM, still same msg diplay not supported
Config details
Acer x153W monitor
Gigabyte B75M D3H motherboard
Intel core i3 3220 ,4GB RAM sandisk
Intel HD graphics 4000
Windows 8.1 x64 RTM
I just finished building my computer. Clean SSD and HDD.
I boot on USB with Win 8 in it.
I go through with it, installing on partitioned first and after failing that on unallocated space.
Both ways result in the installer preparing files, going through everything fine. Then at the end of that window my computer restarts and starts the whole set up all over again.
I can install Windows 8 in my SSD, right?
I have just installed windows 8.1 on Dual Core Laptop. Just wanted to know how can I create a backup of my Windows 8.1 installation so that in future if Windows crashes I can restore the installation+other s/w installed, like we do fresh install of Windows through USB boot.
View 2 Replies View RelatedMy friend has an ultrabook (hp envy 6-1113tx) which came with windows 8 pre-installed and after of more than 1 year of usage the OS became unstable and sluggish so he wanted to do a reinstall. I made bootable usb and enabled the legacy mode in BIOS after which the usb became visible in boot options. But it didn't show any HDD to install the OS on during installation. And also the HDD partition style is GPT.
View 4 Replies View RelatedI want to try creating a Windows 8 installation USB on my computer and using it to try booting up and repairing my friend's computer which is stuck in recovery mode.
If I put the installation files onto my own personal flash drive and create an installation USB out of it, would I later be able to delete the files off it and continue using it as a regular flash drive?
I am installing the Windows 8 upgrage on a windows 7 professional 64 machine.
The upgrade assistant noted the DVD and Secure boot issues that I believe are common incompatibilities.
I ordered the $39.99 upgrade and tried to install and it fails out at 32%
Never asks for product key.
I have chkdsk/r/f, turned off Avast, backed up with no success.
Of course MS is not taking calls over the weekend for this little problem, so i remain frustrated and a little disappointed.
I have a Dell Inspiron 7720. I have created an uefi bootable usn flash disk with rufus 1.4b
I'm trying to boot from it so i can create a Windows 8.1 uefi installation and the problem is that the usb flash disk wont boot.
I have secure boot enabled and legacy option rom disabled.
I get as far as " a driver is needed to continue installation" not found, make sure its on the right media. Here is what i got done on my own..
1- BIOS setting "legacy" and U E F I" boot from USB.
2- F 9 to choose boot order.. selected USB device
3- Installation starts for WIN 7
4- Driver is needed to continue, and i have no clue what it is..some one pointed me to . f 6 f l p y-x 64 because its an HP Envy...
5- Driver not found / wrong driver..
6- Shut down restart.......................
My DVD is Windows 7 ultimate X 32, X 64..
No matter what i cant boot form my USB /U E Fl /WIN 7 pen drive.seems like its not recognized or drivers for the USB chip set not installed.. Of course using the O E M DVD of win 7 fails. because of the G P T style.
I'm trying to recreate win 8.1 pro system reserved partition on my ssd. Initially I installed windows on my ssd (c: ) and windows created the sysres partition on my unformatted hd (without telling me anything). After some trouble I managed to be able to boot from ssd directly without going through the sysres partition on the hd. Now if possible I'd like to recreate the sysres on the ssd (by disconnecting my hd so that windows has no other options than creating this on the ssd). If a try a system refresh it tells me it would wipe away all my user installed apps.
View 4 Replies View RelatedI've been trying to install the printer software for an HP Laserjet printer and can't get it installed. I've even had an HP tech person try to install it via remote control and he couldn't. I was told that something on my system is preventing the installation.
I ran sfc /scannow and it found corrupted files that it couldn't repair. I would be happy to send any log files that may be needed.
I partitioned my hard disk into a 150GB (C) and 500GB (D) and upgraded from Win7 to Windows 8 (and subsequently Windows 8.1 after the recent updates). The OS is installed onto the C Drive.
Performed a Clean Installation of Windows 8 on my C Drive. Under the Choose What To Keep Option, I selected Nothing.
Technically speaking my C Drive would have been wiped clean but after the Windows 8 installation, my C Drive only has 5GB of space left (145GB is being used). The Windows 8 OS is not detecting any of the old programs in my C Drive and the automated Disk Clean up feature only offers removal of temporary internet files. Which brings me to one possible assumption...
The Clean Installation Failed. Windows 8 simply installed itself again on my C Drive and the remaining disk space (containing my previous Windows 8.1 OS and programs) is locked down somewhere. I suspect this had something to do with changing my HD format 3 years ago when I wiped clean my pre-loaded ASUS laptop Win7 and partitioned it to install my Windows 8.
How to remove my previous OS?
Is it possible not to have the partition "recovery"?
Because if you look at the two tutorials:
- UEFI (Unified Extensible Firmware Interface) - Install Windows 7 with - Windows 7 Forums
- UEFI (Unified Extensible Firmware Interface) - Install Windows 8 with
In the tutorial to install Windows 7 in UEFI, there is not that damn partition recovery, while in the tutorial for Windows 8, we can see it.
When I install Windows 7 (MBR mode), I avoid this partition "recovery" by creating a partition with a name before installation. I install the OS on it and everything is fine, no partition "recovery" But here, since one must delete all partitions, If I create a GPT disk with a partitioning tool before installing, is that it might be appropriate?
I updated one laptop with one promo code bought etc and all fine. Came to do the same with another pc but after i inserted the promo code and clicked to submit the payment the screen froze at that point and wouldn't go any further.
Have received an email from Paypal to tell me the payment has been processed but obviously when i try to re-install it etc it's asking me for a promo code and to pay again... i can't carry on from where i left off !! what i can do now?
This is all done via the online offer and Windows Upgrade Offer using the downloaded Upgrade Assistant.
bypass this error code installing my win 8 software
"your computer needs repaired
error code: 0xc0000260