I'm upgrading from Windows 8* After downloading 3 gig and then it installs automatically. THen it restart automatically and at 68% ("Getting Devices Ready: 68%" it crashed. Restarted it and it restored back to Windows 8..
An error code is:
0xC1900101, 0x30018
Don't want to download 3 gig again, where is the installation file saved?
when the windows 8.1 upgrade came out I updated to it without any problems but a few weeks ago a driver update showed up in windows update thingy. I decided to update it but it went horribly wrong my screen went black and stayed black for a hour, that's when I decided to restart my computer after the logo I just got a black screen with a flashing mouse. I made a recovery stick with my sisters windows 8.1 laptop and renewed my windows to 8. I wanted to upgrade to windows 8.1 again but it didn't work after it rebooted it just went to windows 8 again and gave me an error message that said that it couldn't update to windows 8.1. I searched on Google for a few hour and what I got was that I need to update my video drivers. I tried the default drivers I got (v8.9) it didn't work I tried the newest beta one (v13.11) didn't work either. And because my laptop manufacturer is Toshiba i cant update to the latest release of catalyst control center so i have to use the old version of Toshiba or the beta version. Both didn't work BUT before the driver incident I successfully updated to windows 8.1 with v13.11 beta however now it doesn't want to work anymore.
I've tried this: Windows 8.1 installation has failed - Microsoft Community
CBS LOG:
Code: 2014-01-31 17:19:00, Info CBS TI: --- Initializing Trusted Installer ---2014-01-31 17:19:00, Info CBS TI: Last boot time: 2014-01-31 17:12:24.3842014-01-31 17:19:00, Info CBS Starting TrustedInstaller initialization.2014-01-31 17:19:00, Info CBS Ending TrustedInstaller initialization.2014-01-31 17:19:00, Info CBS Starting the TrustedInstaller main loop.2014-01-31 17:19:00, Info
After Windows 8.1 downloaded and installed an update and also SQL Server 2012 SP1, I restarted it and then it no longer booted. The BIOS splash screen would pop up, then the screen went black and nothing else happened. Even the hard drive activity stopped.
I booted from the Windows 8 DVD and chose Troubleshooting and tried Automatic Repair and System Restore, neither of which worked. I then chose Refresh Your PC. However, it then said the drive was locked and I should unlock it before continuing. I used Diskpart to clear the attributes of the volume but that didn't work.
In the end, I did a reinstall without formatting the disk. Once I booted it up properly, I had a look in the Windows.old folder and all of my documents, pictures and other work are missing.
Firstly, is there any way I can roll back to the original install so I don't have to spend a full day installing everything again, and if not, how do I recover all my files?
computer specs, GeForce GTX 760 and i5-4670k CPU. MSI Z97-G45 Gaming Series motherboard. 2tb hdd. finally was able to get my new copy of windows 8 to boot from the cd drive. now when i try to install it, (no current operating system is on this hard drive) it keeps getting stuck before it finishes completion. says install failed. think it slugs out at 56%. tried running it 2x same thing. what i could do to make it finish the install?
I have upgraded my windows 7 ultimate to windows 8 pro a month ago and activated accordingly.
3 Days ago I tried to install Linux OS on XP partition ( earlier I had a XP+ Windows 7 dual boot and I upgraded windows 7 to Windows 8 Pro).
Unfortunately installation of linux failed and Windows 8 Pro is not booting now
How can I restore/re install windows 8 pro??
I tried by inserting repair DVD , but getting message of " repair could not possible".
Actually windows 8 Pro partition is not formatted, only the partition of XP got formatted ( earlier I had a XP+ Windows 7 dual boot and I upgraded on windows 7) .
Right now PC showing some message regarding Intel/processor/..etc.. on a black screen.
Actually I am least bothered about my personal files.
My ultimate concern is regarding activation of windows 8 pro with same product key.
Is there could be any problem with activation of windows 8 PRO?? and what procedure I have to follow?
Reloading windows 8 or 8.1 on a system that the product key is embedded in the Bios.
Scenario only concerning windows 8 or 8.1 any version, also data recover is not a concern: Systems are coming in that are built by a manufacturer (Dell, Toshiba, HP, Compaq, Emachine ect.) the system(s) are out of warranty, They are either in a boot loop, blue screening when loading windows or the hard drive has crashed and isn't loading windows at all. The customers never created recovery disks, nor can we due to windows not loading. We can not get to advanced mode and even if and when we can, creating recovery media is not available.
So let us be clear: We have a system that had windows 8 or 8.1 preinstalled by manufacturer, it was used for multiple months, no recovery media create, now the operating system is not loading, recovery partition corrupt or not accessible, refresh not available, windows product key is embedded in the Bios and is out of warranty.
What we have tried: System with failed hard drive with windows 8 sticker on it. Ran software that extracts product key from BIOS, Inserted an OEM disk for windows 8 and 8.1 when asked to input key, we used the key that was extracted, the installation tells us that the product key is not a OEM key. We do not have a skip button to continue? How in the world can we reload windows 8 or 8.1 on these systems? We have gone through all of the BIOS settings and have tried everything we can think of. If the product key for windows 8 or 8.1 is embedded in the BIOS what do we need to do to make the installation find the key and use it to continue the installation and activate.
From what we are seeing we are not the only one(s) asking this question, the problem is that the reply(s) are: use system refresh, use recovery partition, use recovery media? We understand the reasoning behind having the product key embedded but it shouldn't be this hard to use what the system already has?
I am trying to upgrade to Windows 8.1 from Windows 8 PRO. Though, every time I try to install it, it reaches around 82% and then it stops to give an error code. 0x8007004 I think...
Anyway, I've done some researching and apparently the update does not work unless the user directory is not in its default location.
It's true for my setup. I run both an SSD and HDD, and I moved the user directory to the HDD using a Symbolic Link. That way to trick the system that it still is at C: Drive, but is actually writing the data at D: Drive.
Anyway, what are the steps I can take so that I can install Windows 8.1? There are a few features I want to use that are in that update, but this has prevented me from doing so for a while now. I would prefer to keep it setup this way because I don't want to harm my SSD and keep it in tip top shape.
I have a Lenovo G580 laptop 2gb RAM, i5, and 500gb HDD. It had windows 8 RTM 32 bit installed on its C drive. It had come with DOS preinstalled so I had to do a fresh install of windows 8 via bootable usb. It worked well for few months but now it refuses to boot and goes into "automatic recovery mode" and then it says that your pc needs to be repaired with a recovery disc.
I did not made any recovery disc when it was working so I tried to do a fresh install of win 8 and then win 7 via bootable usb, but both have failed. The screen freezes after blue logo of windows appears and then it restarts saying it has encountered an error and needs to be restarted.
I have tried booting it in safe mode along with all other options on start-up menu but it doesn't work.
I bought a laptop, specifically the Samsung QX410-J01. The Laptop came pre-installed with Windows 7, and I upgraded to Windows 8 on 10/26/2012. I bought the Windows 8 Pro product key, downloaded, and upgraded to Windows 8.
Just last week my laptops Motherboard failed and my computer would no longer start up. The HDD works just fine though so all my files are safe. I decided I wanted to build my own PC and I am simply waiting on my case to arrive.
My question is I want to use Windows 8 on my new PC. The problem I am facing is I do not know how I am going to install Windows on my new machine. I do not want to purchase a new install disk and license since I have already paid for the OS. I can only think of two options and I am not sure if either of them are right.
1. Plug in my laptops hard drive into the new desktop. Run Windows 8.1 on that and use the new Terabyte hard drive I bought as a second hard drive.
2. Somehow put Windows 8.1 on a flash drive and install it from the flash drive onto the new blank hard drive. Then use the product key that I had purchased to activate the OS onto the new hard drive!
I really do not want to have to purchase Windows again, but if I must I guess I will. I believe there has to be a way I doubt after being a loyal Microsoft customer, switching to Windows Phone recently, and buying an Xbox One, that Microsoft will just say "Too bad, buy it again".
I'm using Windows 7 Ultimate 64 bit,i choose upgrade in the installation process of Windows 8 Pro 64 bit,at the end my computer restart 2 times,showing an error with sad smile "" after that it restart again and says that upgrading failed and it revert back to Windows 7 Ultimate 64 bit...
Today i used Windows 8 Upgrade Assistant (Windows8-UpgradeAssistant.exe) ,it found 4 incompatible programs,are they the cause of fail upgrade
Although during the upgrade the Windows 8 Setup didn't found any incompatible programs..
Yesterday, I clean-installed Windows 8 Pro x86 on an old Dell Vostro 1400 laptop which had been running Windows 7 Ultimate, and it activated and ran fine, without even a single exclamation point in Device Manager. I applied the update necessary to make the Store offer 8.1 and proceeded to install it as I've done on a couple other machines. After downloading the thing, it errored out with:
Couldn't install Windows 8.1
Contact your PC manufacturer to see if you can upgrade the System BIOS
When I clicked the OK button, it then gave me the informative and grammar-challenged error box:
Something happened and the Windows 8.1 couldn't be installed. Please try again. Error code: 0xc1900104
Try again Cancel
Ever the optimist, I clicked Try again, and of course, it proceeded to download all over again from scratch, only to error out in the same way. I then downloaded all the Windows 8 updates, although just the one had been necessary on my other machines that successfully upgraded to 8.1, and tried again, only to get the same result.
Today, I've discovered the Windows 8.1 Compatibility Assistant, which avoids the lengthy download of the upgrade every time (Microsoft, maybe you should run it implicitly before downloading 3 GB of transient data), and it tells me:
This PC doesn't meet system requirements
Contact your PC manufacturer to see if you can upgrade the System BIOS
Obviously, no BIOS updates are available, and what exactly is the problem here with my BIOS. The obvious googling turned up nothing except some people with Sony Vaios that had the same problem, which was corrected with a BIOS update, and of course, there is no information on what their BIOS update does to make the 8.1 upgrade possible.
I was installing Windows 8 at my desktop pc.Suddenly power cut occured and it caused the compute to shut down.Then when I restarted my pc again a messege appeared saying that the installation has been corrupted and it can't be continued and it doesn't log on.After that when I tried to re-install Windows 8 the setup got stuck at the "setup is starting" window.I waited overnight for it to go and the installation to start.But it doesn't happen.I have tried to re-install several times but the same problen happens again and again.So neither I can log into my computer now nor I can re-install windows.I don't know what to do.
I have a HP Envy 4 Ultrabook and I want to install Windows 8 from scratch, I put the installation files on a flash drive from a DVD of Win 8 I had, but when I go to install it, it says the "We couldn't find any drives". I have tried using DiskPart within the CMD as well, but it only finds my flash drive when I run list disk. Also, my drives are completely formatted, and I accidentally wiped the recovery partition. I tried with a USB of Win 8 Pro, and it was fine, showing all of my drives correctly, but that version is linked to another PC, so I can't install it. Also, I booted into a Linux Mint live CD and tried to install it, it sees my hard drive correctly, but the Windows install does not, I can't figure this out, never encountered it before. Is Linux my only option at this point?
I have tried updating my Windows 8.1 Pro (64-bit, upgraded from Windows 8 Pro) with the new "Update 1" (KB2919355) but it always fails with ERROR code 8007005 (or 80073712).
What I have tried do to fix:
Run WindowsUpdateDiagnostic (that e.g. removes files from C:WindowsSoftwareDistributionDownload and cleans Windows update history metadata info)DISM.exe /Online /Cleanup-image /ScanhealthDISM.exe /Online /Cleanup-image /RestorehealthDISM.EXE /online /cleanup-image /startcomponentcleanup
After all of this, still the update (KB2919355) fails
There must be something that Microsoft needs to fix, there are xxxxxxxxxxxx amount of similar complains and reports out there...
I decided to install Win 8.1 RTM x64 yesterday but what I expected to be a breeze turned into a nightmare. Installation fails, I am even unable to get into Safe Mode.
I was running Win 7 Ultimate x64 before without any issues whatsoever.
I already described my issues here, with errors and logs: Windows 8.1 RTM installation fails on Dell XPS 1340
Changed memory from 2x4GB to original 2x2GB but completely same issue
I have recently formatted my old windows. But now I am not able to install windows 8(actually even windows XP and seven) . When I try to boot from USB setup starts But 'Getting files ready' (which is second step of installation) stucks at midway like at 14% or 52% or 74% i.e. at any arbitary percentage and nothing happens . Actually I am able to move my cursor but installation no more proceeds further . I have tried to format many times and to run installation but everytime installation stuck at midaway without any error .
My laptop specs are : Acer aspire 5745 , 500GB HDD , 3GB RAM , intel core i3 processor
Windows 8.1 RTM installation says (Display) not supported
1. I tried with windows 8 x64 RTM upgrade,it started and after restart it displayed display not supported
2. So I tried with windows 8.1 x64 beta upgrade still same msg,so itried updating all display drivers and other driver and tried again still same message
3. So tried clean install with windows 8.1 RTM, still same msg diplay not supported
I just finished building my computer. Clean SSD and HDD.
I boot on USB with Win 8 in it.
I go through with it, installing on partitioned first and after failing that on unallocated space.
Both ways result in the installer preparing files, going through everything fine. Then at the end of that window my computer restarts and starts the whole set up all over again.
I have just installed windows 8.1 on Dual Core Laptop. Just wanted to know how can I create a backup of my Windows 8.1 installation so that in future if Windows crashes I can restore the installation+other s/w installed, like we do fresh install of Windows through USB boot.
My friend has an ultrabook (hp envy 6-1113tx) which came with windows 8 pre-installed and after of more than 1 year of usage the OS became unstable and sluggish so he wanted to do a reinstall. I made bootable usb and enabled the legacy mode in BIOS after which the usb became visible in boot options. But it didn't show any HDD to install the OS on during installation. And also the HDD partition style is GPT.
I want to try creating a Windows 8 installation USB on my computer and using it to try booting up and repairing my friend's computer which is stuck in recovery mode.
If I put the installation files onto my own personal flash drive and create an installation USB out of it, would I later be able to delete the files off it and continue using it as a regular flash drive?
I get as far as " a driver is needed to continue installation" not found, make sure its on the right media. Here is what i got done on my own..
1- BIOS setting "legacy" and U E F I" boot from USB. 2- F 9 to choose boot order.. selected USB device 3- Installation starts for WIN 7 4- Driver is needed to continue, and i have no clue what it is..some one pointed me to . f 6 f l p y-x 64 because its an HP Envy... 5- Driver not found / wrong driver.. 6- Shut down restart.......................
My DVD is Windows 7 ultimate X 32, X 64..
No matter what i cant boot form my USB /U E Fl /WIN 7 pen drive.seems like its not recognized or drivers for the USB chip set not installed.. Of course using the O E M DVD of win 7 fails. because of the G P T style.
I have a toshiba canvio basics 1TB portable external hard drive usb powered. Model no. E05A100BBU2AK. I had purchased it some 3-4years back. It worked for some 4-5months or so. Then, whenever i plug it in the port, an error comes "FAILED DRIVER SOFTWARE INSTALLATION". The device doesn't come with a software installation CD or guide... It's plug and play only I think. The white LED light goes on flickering right when i plug it in till i remove it. A click sound along with metallic scratching sound comes from the device at a regular interval while plugged in & also I can feel the drive moving inside as soon as it is plugged.
I had tested it in all the ports of my system, also in many other systems of my friends but gives the same error on plugging in or the system does not identify it. It cannot be seen in My Computer. the hard drive is not getting recognised. In Device manager I cannot see any error in USB ports & everything is workng properly. USB ports works when other devices are plugged in.
I'm trying to recreate win 8.1 pro system reserved partition on my ssd. Initially I installed windows on my ssd (c: ) and windows created the sysres partition on my unformatted hd (without telling me anything). After some trouble I managed to be able to boot from ssd directly without going through the sysres partition on the hd. Now if possible I'd like to recreate the sysres on the ssd (by disconnecting my hd so that windows has no other options than creating this on the ssd). If a try a system refresh it tells me it would wipe away all my user installed apps.
I've been trying to install the printer software for an HP Laserjet printer and can't get it installed. I've even had an HP tech person try to install it via remote control and he couldn't. I was told that something on my system is preventing the installation.
I ran sfc /scannow and it found corrupted files that it couldn't repair. I would be happy to send any log files that may be needed.
