Setup Installation :: Create System Reserved Partition After Installation?
Jun 15, 2014
I'm trying to recreate win 8.1 pro system reserved partition on my ssd. Initially I installed windows on my ssd (c: ) and windows created the sysres partition on my unformatted hd (without telling me anything). After some trouble I managed to be able to boot from ssd directly without going through the sysres partition on the hd. Now if possible I'd like to recreate the sysres on the ssd (by disconnecting my hd so that windows has no other options than creating this on the ssd). If a try a system refresh it tells me it would wipe away all my user installed apps.
View 4 Replies
ADVERTISEMENT
Sep 14, 2013
I want to install Windows 8 Pro onto the second partition of my laptop that already has W7 Pro installed. What are the correct settings for the second partition(simple, active, primary,etc) so that the existing System Reserved partition used by W7 won't get clobbered? Is this even possible?
View 3 Replies
View Related
Dec 26, 2013
I'm trying to upgrade from Windows 7 to Windows 8 (and then 8.1) on a laptop with a 240 GB SSD. When I run setup, it loads, but then says Windows can't be installed because there isn't enough free space on the system reserved partition. My reserved partition is only 32 MB (I believe it was shrunk from 100 MB when I swapped the SSD in).
Is there any way I can resize the reserved partition and install Windows 8, or will I need to totally reformat the drive and repartition? Don't want to reinstall all my software .....
View 8 Replies
View Related
Mar 15, 2014
I have a custom PC I built and I was running 8.1 on it. I have to drives a 120gb ssd that had windows on it and I have a 1 TB that had the 350mb system reserved partition and 2 other partitions I had for data and a boatload of free space. I wanted to try and install Linux Ubuntu on the 1tb hard drive. I did a custom install on it because I didn't want it to delete my existing partitions so in the install I made 2 partitions for Ubuntu, after I installed it my 2 data partitions are gone and I don't know what happened with the 350mb system reserved partition.
On that disk now is the 2 Linux partitions and a 150mb partition that I can't tell what it is. But now I can't boot into windows, even when I go from bios. My question is in that system reserved partition is that where the bootmgr is? Because I did nothing with the ssd where windows is and I get a no operating system error when I try to boot off it. How I can fix that disk if the system reserved partition isn't on it.
View 3 Replies
View Related
Mar 3, 2012
Ok so i am trying to install windows 8 X64 onto a different hard drive as windows 7 so i can switch between the two at startup.Ok so my problems started yesterday when trying to install windows 8 onto the Hard Drive i was getting"Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks."To fix this i converted the disk to a GPT disk in Disk ManagerNow im getting the Error "Setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more Information." Here is a screenshot of disk manager at the moment.I am trying to install Windows 8 to Disk 2.
View 9 Replies
View Related
Jun 28, 2013
im using acer aspire p3, and wish to install a clean Windows 8 cause the hard disk capacity just 58gb and system take around 30gb.
i try to install Windows 8 wif a usb drive inside window, but it seems giving me error: we count install Windows 8 to your pc
then i try to boot wif usb, and i found tat i cant install too because the main partition is oem reserved, any i dea i can install a new clean window?
View 1 Replies
View Related
Jun 14, 2014
From many days i was trying to make backup but i was not able to make than i found that my Master File Table it corrupt which located in System Reserved.
Than i thought of Re-Installing Windows than i Formatted System Reserved Drive & My C Drive.Now I am not even able to Install Windows.
Error Shown by the Windows Setup - Setup was unable to create a new system partition or locate an existing system partition.
View 7 Replies
View Related
Nov 29, 2013
I tried restoring my computer using Easeus backup, but an error occurred during the restoration process. I've managed to fix it by doing diskpart /fixmbr and then using the windows dvd automated repair, however, what I ended up with is this:
So there are now two visible drives on my PC - C and Q (system reserved), and it doesn't see the data drive.
What I want to do is to make the data drive visible, and merge the C and Q drives into one (or make Q invisible), if that is possible. So, how do I do that?
View 1 Replies
View Related
Jun 29, 2014
I recently picked up an Asus laptop, a SDD to replace the the laptop's HDD, and a HDD caddy to hold the HDD in place of the CD/DVD drive. After a fresh Win 8.1 install on the SDD, I made system images of both the SDD and the HDD with the Win 8 OEM install (both stored on external drive). I also created a USB recovery drive and then formatted the HDD.
Fast forward a few weeks... It's last Friday. I'm about to leave for a business trip. I boot up my laptop and a screen comes up telling me to "reboot and select proper boot device". I pull the SDD out, hook it up to my desktop, and see that the drive shows up, but it's blank. A little googling turned up a few reviews from other people with the same issue. On rare occasion, it will wipe itself. Using the USB recovery drive and the Win 8.1 system image, I got things up and running again.
Now for my question, instead of constantly carrying around the 2 USB drives holding the recovery and system image, can I create a recovery partition on my HDD that I can boot too if my SDD wipes again? (Could I copy or clone my Recovery USB to a partition on my HDD?) Then I could just keep the SSD system image on the HDD in case I need to restore it, right?
Disk 0: SDD disk that wiped itself
Disk 1: HDD that I'd like to have a recovery partition and system image on
I also have: Win 8 OEM system imageWin 8.1 system imageRecovery USB drive (8.1)Win 8.1 USB Install drive
View 9 Replies
View Related
Apr 20, 2014
I have a new Asus X102BA it has modest performance so as I have a spare OCZ 120GB ssd I thought I would see if it could be improved. I have tried to install win 8 Pro using a powered DVD drive but I get the message in my title. The primary partition is shown on screen and I have nothing but the DVD drive plugged into the computer...
View 5 Replies
View Related
Dec 12, 2013
I used to have System Reserved on separate partion to C: but on my last fresh re-install, I decided to make C: and System Reserved in one partition. Here's what shows on Disk Management:
My question is, which is better. System Reserved on the same partition with C: or on a separate partition?
View 3 Replies
View Related
Oct 17, 2013
Because it does not contain enough free space. Clearly I have enough free space... [URL] ....
What should I do? I want to do a dual boot, so I can keep Windows 7 in case I don't like 8.1...
I formatted and deleted that partition and I tried again with 201gb, and no luck. [URL] ....
View 6 Replies
View Related
May 6, 2014
I already have windows 8.1 installed in c: partition
I have created new partition ''New Volume :" to install windows server 2008 on it ,but when I try to boot from the CD to install it this message appear
"Windows cannot be installed to this Hard disk space . The partition contain one or more volumes that are not supported for installation" ...
This is screenshot of disk management ...
View 9 Replies
View Related
Jun 15, 2014
Here is the deal I have 2 hdds (160 gb and 1 tb) late last night used the 1 tb as a flash drive and re installed my OS on the 160 gb drive. The "system" files are on the 1 tb drive and all other files ( boot crash dump etc ) are on the other one.
PROBLEM: while doing a cold start the system fails to spin up th bigger drive in time for the software to detect the system file on the bigger drive and it brings up the boot manager saying files are not present to load, a restart fixes the problem as the bigger drive would be up to speed by then, any work around to delay the boot till both drives are up to speed .........???.
Further i think that moving the "system partition " to the other disk will eliminate this issue ...... how do i go about doing that ... See the image below
QUESTION :if i remove the 1 tb disk physically and reinstall OS and connect it back will everything be as good as new or will it pose problems as then there would be two "system " partitions .....
View 9 Replies
View Related
Jan 8, 2014
I installed Windows 8/8.1 on a system with a Gigabyte GA-Z77X-UD5H MB. When I look at the SSD where Windows is installed I have one partition. I also installed Windows 8/8.1 on an ASRock Z77 OC Formula MB. When I look at the SSD where Windows is installed I have three partitions - 300MB (Recovery Partition), 100MB (EFI System Partition) and 111.27GB (Boot,....Partition). Why did the Windows 8 installer create three partitions on the ASRock system? I think I understand the EFI partition since the ASRock BIOS has a "Load UEFI Defaults" option. The Gigabyte MB does not have this option in the BIOS? Is that because the ASRock MB has truly implemented EFI and uses the EFI System Partition to store boot information?
Why was the Recovery Partition created? I built this system from scratch so there is not any third party involvement. If I reinstall Windows 8 using a new - never used SSD will I get the three partitions? If I format the SSD with one partition prior to Installing Windows 8 what will I get?
I not concerned about the loss of 300MB,why I got different partition configurations on fresh installs of Windows 8 on two different MB's/Systems?
View 9 Replies
View Related
Mar 18, 2013
I was having a problem since my computer shows "windows cannot delete the active system partition on this disk". How to delete the partition on which i have windows 7 installed.
Here is the screen shot ...
View 2 Replies
View Related
Nov 30, 2013
While I was messing around with my laptop, I decided to add on a fourth operating system, Arch Linux. I suppose I was pushing my luck a bit . Anyways, during the installation, I accidentally deleted the EFI system partition from my laptop, which contained the Windows Boot Manager and necessary files to boot. Great. I only made things worse by trying to troubleshoot, and broke grub as well.
I have a Windows 8 repair disk I made using the Windows 8 built in utility, but it does not boot: the computer turns on, and just hangs at the Toshiba splash screen.
I also can obviously not access the Toshiba recovery partitions, as they are booted into just like Windows itself.
I found a bootx64.efi file on one of my system's recovery partitions (Toshiba seems to have some really complex system going on) and placed it in EFIootootx64.efi. According to this site, FGA: The EFI boot process., I need to place the bkpbootmgfw.efi (on my system, that was what it was called, but I suspect boot-repair (ubuntu tool) messed something up when I was first setting up grub and the ESP and the bkp stands for backup) back onto the EFI System Partition.
Where to look for in the various Windows Imaging Format .wim and .swm files I have laying around my recovery partition(s) in order to extract the necessary EFI files. Any Windows Repair iso that works.
View 9 Replies
View Related
Jan 26, 2014
Install 8.1 Pro over email, he gets to the HDD selection screen in setup, deletes the old Windows 7 partition, deletes the old 100MB System Reserved partition, creates a new partition as normal
At this point it should have asked him to allow setup to create a new 350MB system reserved partition, but no, it just automatically began installing 8.1
I told him, let it complete install, then check disk management to see if it has created the 350MB partition and this is the screenshot he sent me
why his storage drive is Dynamic, could this be why there was no system reserved partition created on the main drive?
View 8 Replies
View Related
Dec 14, 2013
So that is a screen shot of my disk management screen. As you can see, disk0 and disk1 both have system reserved partitions on them.
Disk0 is a SSD that I only want Windows, Office, and possibly my video and photo editing software on it.
Disk1 is a 2TB SATA HD that is split into 2 partitions used for programs on 1 and media on the other
Disk2 is a 2TB SATA HD that is used just for Media storage, and I'm thinking about adding a partition for backups
What the 25MB partition is on Disk2. I also don't know why I cannot access the system reserved partition on Disk0, and why there is another system reserved partition on Disk1 that I can explore, and contains the boot folders.
How did this happen in the first place? Is there anyway for me to fix this issue without wiping everything? I have done some searching and found quick fixes but haven't found an explanation as to how this happened in the first place.
I also would like to create repair DVDs and a full system image of my C drive, but have not done either of these before.
View 2 Replies
View Related
May 1, 2014
I have my system reserved partition attached with my personal partition and i have a lot of useful data in it.
Because of it i'm not able to format system reserved at start to avoid boot loader asking me wether you want to choose between windows 8 or the earlier version of windows.
How can I seperate system reserved from my partition .
System reserved is attached with My folder (G)
My disk management look like this.
View 2 Replies
View Related
Feb 4, 2013
I was recently messing around with installing Windows 8 on an external USB 3.0 HDD (NOT a flash drive) (How To Install Windows 7 On USB Flash Drive or External Hard Drive), and found website that showed a method for doing so by way of a "NT6 Fast Installer". I tried many times to get it to work and just when I was about to give up it finally succeeded. I rebooted into the external drive (unplugged my internal HDD) and it finished installing successfully. After booting/logging in for the first time I noticed that performance was near-native to what it would be if you ran it from an internal HDD. Games even ran well. But I noticed that there was only 1 partition and no System Reserved, and it appeared that the boot files were located on the C drive.
So my question is, on a regular 8 installation to an internal HDD, how can you delete System Reserved and move the boot files to the C drive? Is there any advantage in doing so (or disadvantages)? I just figured that with a C drive and a System Reserved that makes 2 primary partitions out of an available 4 being taken up, by having everthing on C you would only have 1 primary partition and 8 would still work. The steps listed at the above website are meant for 7 and Vista, but I tested them to the tee and they worked without modification on 8. I just had to flag the partition as active/bootable before booting into it for the first time, or else it would throw an error. I know alot of people think that it cant be done or is hard to do, but it can. But that's not what I'm trying to prove. It essentially amounts to being almost the same thing, if not exactly the same, as Windows To Go, except that you're installing via an unofficial method since the official installer wont allow installation to a USB HDD.
View 2 Replies
View Related
Oct 28, 2013
Windows 8.1 reserved partition will not optimize on SSD. Even if you try to run it manually. Have the latest firmware update for the SSD and Trim in enabled.
Image attached.
View 4 Replies
View Related
Jan 8, 2014
Last night clean installed windows 7 pro and noticed that system reserved partition is created with 100MB. Then upgrade it to windows 8 pro and finally updated it to windows 8.1 pro.
After complete installation of windows 8.1 pro and noticed in computer management that still system reserved partition is 100MB. whereas if in case i did clean installation of windows 8 pro then system reserved partition will be 350MB.
My HDD capacity is 2TB and i have nearly 1TB of unallocated space. C drive is 200GB
Therefore i would like to increase my system reserved partition from 100MB to 350MB.
How to increase system reserved partition from 100MB to 350MB with step by step ?
What is the advantages of allowing 350MB to system reserved partition in windows 8.1 pro?
View 2 Replies
View Related
Jan 28, 2013
Is it possible not to have the partition "recovery"?
Because if you look at the two tutorials:
- UEFI (Unified Extensible Firmware Interface) - Install Windows 7 with - Windows 7 Forums
- UEFI (Unified Extensible Firmware Interface) - Install Windows 8 with
In the tutorial to install Windows 7 in UEFI, there is not that damn partition recovery, while in the tutorial for Windows 8, we can see it.
When I install Windows 7 (MBR mode), I avoid this partition "recovery" by creating a partition with a name before installation. I install the OS on it and everything is fine, no partition "recovery" But here, since one must delete all partitions, If I create a GPT disk with a partitioning tool before installing, is that it might be appropriate?
View 6 Replies
View Related
Jan 30, 2013
I have win 8 pro installed & two HDDs with two partions each , I want to migrate the boot partition to another partition on the second drive .
It would have been easier if i would have just cloned the complete drives but one of the partions on the 2nd drive has data which cannot be deleted .
So I have Drive
1 - Partitions C: ( boot partition ) & D:
Drive 2 - Partitions E: & F:
I want to remove Drive 1 from my PC so i want to copy C: to E: then remove drive 1 & boot from E:
I tried "Easeus todo backup" , did not work, it does not make the copy bootable , to make it bootale the whole drive has to be copied .
I tried making an image of C: using Windows 8 inbuilt backup feature then removed drive 1 , installed Windows 8 on E: then tried restoring the image of C: but i got some error.
View 9 Replies
View Related
Nov 5, 2013
I am trying to create a system image backup and I keep getting this error message
[COLOR=#FF0000]'Threre is not enough disk space to create the volum shadow copy on storage location. Make sure that for all volume to be backup up, the minimum disk space required for shadow copy creation is available. this applies to both the backup storage destination and volume included in the backup. Minimum requirement for Volumes less than 500 megabytes, the minimum is 50 megabyte of free space. for voulimes more than 500 megabytes, the minimum is 320 megabytes of free space. Recommended at least 1 gigabytes free of disk space on each volumes if volumes size is more than 1 gigabytes (0x80780119)"
I am backing it up to a external HDD with over a tb of free space but I understand its not letting me perform the backup because the hidden 100mb hidden system partition is full...if i create a larger partition how can I copy that system partition to it? if that is possible....
View 6 Replies
View Related
May 16, 2014
Trying to create an ISO of the windows 8.1 dvd. I want to make a bootable USB stick when I go to install it to speed things up and make a backup copy. I can create the ISO using Alcohol 120 but when I use the Windows 7 USB/DVD tool to open the ISO it says it is not a valid ISO file.
Every other bit of software can read it okay so it is an ISO file as far as I can tell.
View 9 Replies
View Related
Jun 1, 2014
I have a UEFI PC with an SSD and an HDD. I installed Windows 8 and upgraded to Windows 8.1 on the SSD.
For reasons I don't understand, Windows created the system reserved partition on the HDD, not the SSD. Not knowing this, I erased and reformatted the HDD, and now the system will not boot. The Windows 8.1 install is still present on the SDD, but the system reserved partition is absent.
Is there a way to re-create the system reserved partition? I have the Windows 8 install DVD, but the upgrades to 8.1 were made using Microsoft Update and the Microsoft Store.
View 3 Replies
View Related
Sep 15, 2014
I have a Windows 8 pro oem copy and I want to create a bootable Windows 8.1 pro Usb stick in uefi format to do a clean install.
Now I built my machine myself so I am sure there is no embedded windows key in the bios? But I cant seem to download anything that will create the media, it says it my key wont work in a retail copy of windows 8.
View 3 Replies
View Related
Apr 26, 2014
I already have a Windows 8 Pro USB installer setup but I don't think it can be used to do a repair install for my Windows 8.1 Pro upgrade. So I'm trying to create a new USB installer setup specifically for Win 8.1 Pro. However, the Windows 8.1 setup window is not accepting the 8.1 Product Key that I extracted from Belarc, ProduKey and WPkey. Is there a way to get around that issue so that I can create the Win 8.1 USB installer?
View 3 Replies
View Related
Feb 1, 2014
Why windows 7 and windows 8 introduced a limitation when using Disk Management, and is NOT possible to create more than 3 Primary Partitions? However, using DiskPart from command line it is VERY possible, no warnings or notices.
Code: C:Windowssystem32>diskpartMicrosoft DiskPart version 6.3.9600Copyright (C) 1999-2013 Microsoft Corporation.On computer: PAINKILLERDISKPART> listMicrosoft DiskPart version 6.3.9600DISK [code]....
As far as I know, there is a maximum of 4 Primary partitions on a hardisk, or 3 primary and one extended, and IN the extended partitions more that 4 logical drivers.However, from any disk utility like the old, deprecated, and buggy Partition Magic, acronis disk partition utility, gparted Linux, parted, cfdisk, fdisk, or even on the older Windows like Xp, nt, 2000, 98, me, ms-dos, freedos, I WAS ALWAYS BEEN ABLE TO CREATE 4 PRIMARY PARTITIONS, but with the new WINDOWS 7 and the new WINDOWS 8, it appears this limitation of only 3 PRIMARY PARTITIONS instead of 4. Don't know about Vista as I have skipped that version of windows on every PC that I have build or worked.
Or is working like this because of some hidden reason which I can't figure out by myself what could It be, and the only thing that I can observe is that while technology is evolving (hardware and software), we have limitations like this, to create only 3 primary instead of 4 primary while using Disk Management from administrative tools or right clicking on the computer and "manage" console.
Personally I am a little irritated/annoyed that now the disk management is having "handicap" and I can NOT find a serious reason for this idiocratic limitation. As we are "evolving" the normal path It would be more normal to be able to use more that 4 primary on a hardisk, from my point of view, not limiting to ONLY 3 Primary.
View 9 Replies
View Related
