im using acer aspire p3, and wish to install a clean Windows 8 cause the hard disk capacity just 58gb and system take around 30gb.
i try to install Windows 8 wif a usb drive inside window, but it seems giving me error: we count install Windows 8 to your pc
then i try to boot wif usb, and i found tat i cant install too because the main partition is oem reserved, any i dea i can install a new clean window?
I'm trying to recreate win 8.1 pro system reserved partition on my ssd. Initially I installed windows on my ssd (c: ) and windows created the sysres partition on my unformatted hd (without telling me anything). After some trouble I managed to be able to boot from ssd directly without going through the sysres partition on the hd. Now if possible I'd like to recreate the sysres on the ssd (by disconnecting my hd so that windows has no other options than creating this on the ssd). If a try a system refresh it tells me it would wipe away all my user installed apps.
View 4 Replies View RelatedI want to install Windows 8 Pro onto the second partition of my laptop that already has W7 Pro installed. What are the correct settings for the second partition(simple, active, primary,etc) so that the existing System Reserved partition used by W7 won't get clobbered? Is this even possible?
View 3 Replies View RelatedI'm trying to upgrade from Windows 7 to Windows 8 (and then 8.1) on a laptop with a 240 GB SSD. When I run setup, it loads, but then says Windows can't be installed because there isn't enough free space on the system reserved partition. My reserved partition is only 32 MB (I believe it was shrunk from 100 MB when I swapped the SSD in).
Is there any way I can resize the reserved partition and install Windows 8, or will I need to totally reformat the drive and repartition? Don't want to reinstall all my software .....
I have a custom PC I built and I was running 8.1 on it. I have to drives a 120gb ssd that had windows on it and I have a 1 TB that had the 350mb system reserved partition and 2 other partitions I had for data and a boatload of free space. I wanted to try and install Linux Ubuntu on the 1tb hard drive. I did a custom install on it because I didn't want it to delete my existing partitions so in the install I made 2 partitions for Ubuntu, after I installed it my 2 data partitions are gone and I don't know what happened with the 350mb system reserved partition.
On that disk now is the 2 Linux partitions and a 150mb partition that I can't tell what it is. But now I can't boot into windows, even when I go from bios. My question is in that system reserved partition is that where the bootmgr is? Because I did nothing with the ssd where windows is and I get a no operating system error when I try to boot off it. How I can fix that disk if the system reserved partition isn't on it.
From many days i was trying to make backup but i was not able to make than i found that my Master File Table it corrupt which located in System Reserved.
Than i thought of Re-Installing Windows than i Formatted System Reserved Drive & My C Drive.Now I am not even able to Install Windows.
Error Shown by the Windows Setup - Setup was unable to create a new system partition or locate an existing system partition.
I have a new HP envy t215 desktop with intel I7 Processor on a Megatrends MB with an EFI partition. The computer came with windows 7 pro but I want to temporally installWindows 8.
I want to remove the hard drive with Windows 7 Pro and insert a new 1TB Sata drive for a fresh install of windows 8. I have an almost new 1TB Sata WD hard drive formatted GPT/NTFS.I have completely wiped the hard drive. I will have to have the EFI partition on the windows hard drive.
The real question is will the windows 8 OEM software create the correct partitions when the system is installed.I know I need the EFI partition and the operating system partition at a minimum.
I want install another copy of windows 8 on another partition. This is useful in installing different group of programs so I boot the suitable one related to specific problems. Moreover you can delete a problem file from the other partition.
View 4 Replies View RelatedI partitioned a 1 Tb drive with windows 8 on first partition. Trying to install windows 7 on 2nd partition. Will boot from DVD & load files but when windows tries to open it stops & must restart computer to get out of freeze. Computer is Gateway DX4860-UR28.
View 4 Replies View RelatedI already have windows 8.1 installed in c: partition
I have created new partition ''New Volume :" to install windows server 2008 on it ,but when I try to boot from the CD to install it this message appear
"Windows cannot be installed to this Hard disk space . The partition contain one or more volumes that are not supported for installation" ...
This is screenshot of disk management ...
I built up a new PC featuring a brand new SSD (i.e fully unallocated). Then, I made a clean install of Windows 8.1 pro (64bits) using an ISO DVD. Using Windows disk management tool after the install, I can see that only two partitions have been created: one System partition in NTFS (350MB) and the remaining of the SSD is the C: partition while I was expecting a third one : a recovery partition. Of course, I do not remember a prompt during the install to ask whether I want a recovery parttion or not.
Is it normal ? Is a recovery partition useful knowing I have the install DVD ? If the recovery partition has some advantages, is there a way to create it after the install is completed ?
How to make a clean install on my Samsung Series 5 550P5C, but I hear from here to there that when I do it I will delete my Recovery Partition (which I would like to have on the disc in some radical case). However I saw a thread when someone performed a clean install and didn't lost the recovery partition. Additionally I think it should not be able to remove it installing Windows on C partition, as this is another partition on the disc - than Recovery part.
View 5 Replies View RelatedI swapped the HDD with a new blank SSD in T530 and booted it with the recovery USB of windows 8. System boots from the USB and gives refresh, reset, and other options. However, when I select reset ( to fresh isntall the OS on the SSD), it fails saying a required partition is missing. What! I'm using a blank SSD, shouldn't the installer present me with options to format and use the drive rather than erring out?
Is there any better way of installing the windows 8 os on a new blank SSD using the recovery USB?
I do have gParted live USB. If nothing works, I will partition the SSD using gParted and try the Windows 8 recovery USB again.
Windows 8 creates its own hidden recovery partition during the install. In my case, it's 450MB.
I know not to touch this partition, and I'd like to know what's in that partition and how it's used.
I used to have System Reserved on separate partion to C: but on my last fresh re-install, I decided to make C: and System Reserved in one partition. Here's what shows on Disk Management:
My question is, which is better. System Reserved on the same partition with C: or on a separate partition?
I tried to install 32 bit Windows 8 in my friends laptop through bootable usb. It has win7 preloaded. I tried for the dual boot. But when I select the partition drive it said that windows cannot be install in that drive because the selected drive is GPT partition style. How to install Windows 8 os in that GPT partition style hard drive.
Laptop has Hard disk-500 gb,64 bit win7.
I have win7 hp 64bit and i want to install win 8/8.1 on a separate partition(duel boot).
How do I do this? i do not want to upgrade I want to keep separate systems.
I tried restoring my computer using Easeus backup, but an error occurred during the restoration process. I've managed to fix it by doing diskpart /fixmbr and then using the windows dvd automated repair, however, what I ended up with is this:
So there are now two visible drives on my PC - C and Q (system reserved), and it doesn't see the data drive.
What I want to do is to make the data drive visible, and merge the C and Q drives into one (or make Q invisible), if that is possible. So, how do I do that?
Install 8.1 Pro over email, he gets to the HDD selection screen in setup, deletes the old Windows 7 partition, deletes the old 100MB System Reserved partition, creates a new partition as normal
At this point it should have asked him to allow setup to create a new 350MB system reserved partition, but no, it just automatically began installing 8.1
I told him, let it complete install, then check disk management to see if it has created the 350MB partition and this is the screenshot he sent me
why his storage drive is Dynamic, could this be why there was no system reserved partition created on the main drive?
So that is a screen shot of my disk management screen. As you can see, disk0 and disk1 both have system reserved partitions on them.
Disk0 is a SSD that I only want Windows, Office, and possibly my video and photo editing software on it.
Disk1 is a 2TB SATA HD that is split into 2 partitions used for programs on 1 and media on the other
Disk2 is a 2TB SATA HD that is used just for Media storage, and I'm thinking about adding a partition for backups
What the 25MB partition is on Disk2. I also don't know why I cannot access the system reserved partition on Disk0, and why there is another system reserved partition on Disk1 that I can explore, and contains the boot folders.
How did this happen in the first place? Is there anyway for me to fix this issue without wiping everything? I have done some searching and found quick fixes but haven't found an explanation as to how this happened in the first place.
I also would like to create repair DVDs and a full system image of my C drive, but have not done either of these before.
I have win 8 pro installed & two HDDs with two partions each , I want to migrate the boot partition to another partition on the second drive .
It would have been easier if i would have just cloned the complete drives but one of the partions on the 2nd drive has data which cannot be deleted .
So I have Drive
1 - Partitions C: ( boot partition ) & D:
Drive 2 - Partitions E: & F:
I want to remove Drive 1 from my PC so i want to copy C: to E: then remove drive 1 & boot from E:
I tried "Easeus todo backup" , did not work, it does not make the copy bootable , to make it bootale the whole drive has to be copied .
I tried making an image of C: using Windows 8 inbuilt backup feature then removed drive 1 , installed Windows 8 on E: then tried restoring the image of C: but i got some error.
I have my system reserved partition attached with my personal partition and i have a lot of useful data in it.
Because of it i'm not able to format system reserved at start to avoid boot loader asking me wether you want to choose between windows 8 or the earlier version of windows.
How can I seperate system reserved from my partition .
System reserved is attached with My folder (G)
My disk management look like this.
I was recently messing around with installing Windows 8 on an external USB 3.0 HDD (NOT a flash drive) (How To Install Windows 7 On USB Flash Drive or External Hard Drive), and found website that showed a method for doing so by way of a "NT6 Fast Installer". I tried many times to get it to work and just when I was about to give up it finally succeeded. I rebooted into the external drive (unplugged my internal HDD) and it finished installing successfully. After booting/logging in for the first time I noticed that performance was near-native to what it would be if you ran it from an internal HDD. Games even ran well. But I noticed that there was only 1 partition and no System Reserved, and it appeared that the boot files were located on the C drive.
So my question is, on a regular 8 installation to an internal HDD, how can you delete System Reserved and move the boot files to the C drive? Is there any advantage in doing so (or disadvantages)? I just figured that with a C drive and a System Reserved that makes 2 primary partitions out of an available 4 being taken up, by having everthing on C you would only have 1 primary partition and 8 would still work. The steps listed at the above website are meant for 7 and Vista, but I tested them to the tee and they worked without modification on 8. I just had to flag the partition as active/bootable before booting into it for the first time, or else it would throw an error. I know alot of people think that it cant be done or is hard to do, but it can. But that's not what I'm trying to prove. It essentially amounts to being almost the same thing, if not exactly the same, as Windows To Go, except that you're installing via an unofficial method since the official installer wont allow installation to a USB HDD.
Windows 8.1 reserved partition will not optimize on SSD. Even if you try to run it manually. Have the latest firmware update for the SSD and Trim in enabled.
Image attached.
My Inspiron 7520 laptop arrived today and I've been trying to get the various Intel features to work on it. I've got the rapid storage (ssd cache drive) set up but I think I may have broken the rapid start feature of it along the way. Now when I start the laptop I get an error saying 'your system does not appear to have intel rapid start enabled'. When entering my BIOS, the intel Rapid Start Technology is greyed out and I can't click it.
I thought it may have been because i set all available space on my SSD to the rapid storage feature. So I changed it and made it so that it only takes about 20gb (of the 32gb) and tried to follow the intel guide of setting up the rapid start feature [URL] ....., however I received an error on the part where it said 'setid=84 override' which said my partition it was not of the right type or format. So after reading another guide online it said to try using the partition type of MSR instead of Primary. So I tried that and now the partition is hidden from disk management and I can't seem to delete it from diskpart either.
Last night clean installed windows 7 pro and noticed that system reserved partition is created with 100MB. Then upgrade it to windows 8 pro and finally updated it to windows 8.1 pro.
After complete installation of windows 8.1 pro and noticed in computer management that still system reserved partition is 100MB. whereas if in case i did clean installation of windows 8 pro then system reserved partition will be 350MB.
My HDD capacity is 2TB and i have nearly 1TB of unallocated space. C drive is 200GB
Therefore i would like to increase my system reserved partition from 100MB to 350MB.
How to increase system reserved partition from 100MB to 350MB with step by step ?
What is the advantages of allowing 350MB to system reserved partition in windows 8.1 pro?
I am dual booting my dell e6420, 8 gb ram. I have windows 8 on my HD and windows 8 on my ssd. Since I do live audio work, I keep the ssd system super clean. It doesn't get on the net, etc.
Recently windows prompted me to upgrade my hd os from 8 to 8.1, which I did. Since then, every few minutes, I get a popup saying I have Low disk space on my system reserved partition. It's 300 mb, which seems larger than most, but there is indeed only 1 mb free. But of course when I run disk cleanup, there is nothing that can be deleted!
It's now popping up about every 2 minutes. Very annoying.
I have 2 os's, do I even need the srp? But why on earth would it run out of memory? Maybe because of the dual boot? But I'd think they'd account for that.
should I expand the volume? That just seemed a little dangerous, and hopefully unnecessary.
Because it does not contain enough free space. Clearly I have enough free space... [URL] ....
What should I do? I want to do a dual boot, so I can keep Windows 7 in case I don't like 8.1...
I formatted and deleted that partition and I tried again with 201gb, and no luck. [URL] ....
Is it possible not to have the partition "recovery"?
Because if you look at the two tutorials:
- UEFI (Unified Extensible Firmware Interface) - Install Windows 7 with - Windows 7 Forums
- UEFI (Unified Extensible Firmware Interface) - Install Windows 8 with
In the tutorial to install Windows 7 in UEFI, there is not that damn partition recovery, while in the tutorial for Windows 8, we can see it.
When I install Windows 7 (MBR mode), I avoid this partition "recovery" by creating a partition with a name before installation. I install the OS on it and everything is fine, no partition "recovery" But here, since one must delete all partitions, If I create a GPT disk with a partitioning tool before installing, is that it might be appropriate?
I just got a new laptop, a Lenovo X230, for which I paid extra to have the OS on it as Windows 8 Pro.
So--now I have it, and Win 8 Pro 64 is installed and activated on it. I am a legal owner of Win 8 Pro.
However, I would like to do a clean install of Win 8 on the computer, to have it free of bloatware, etc. (In fact, I would like to set up a multi-boot with Win 7, and perhaps even triple boot with Xp as well. (I have installation media and my product keys for XP and 7 though, so those are not really a problem.)
The computer came with no discs at all. There is a procedure to make recovery disks. I may do that, but I think those will be to restore the computer to how it came from the factory, and therefore not usable for a clean install.
I don't see my product key for Win 8 anywhere. Not on the computer, not on any kind of card that came with it, etc.
I looked at the tutorial here for clean install of Windows 8, but it requires an install disc and product key. I have neither, although I am a legal owner of Windows 8.
Is there a way I can create (from my installed Windows 8) a win 8 install disk, that can be used for a clean install? Or a link to download one? Is there a way I can get my product key?
I recently picked up an Asus laptop, a SDD to replace the the laptop's HDD, and a HDD caddy to hold the HDD in place of the CD/DVD drive. After a fresh Win 8.1 install on the SDD, I made system images of both the SDD and the HDD with the Win 8 OEM install (both stored on external drive). I also created a USB recovery drive and then formatted the HDD.
Fast forward a few weeks... It's last Friday. I'm about to leave for a business trip. I boot up my laptop and a screen comes up telling me to "reboot and select proper boot device". I pull the SDD out, hook it up to my desktop, and see that the drive shows up, but it's blank. A little googling turned up a few reviews from other people with the same issue. On rare occasion, it will wipe itself. Using the USB recovery drive and the Win 8.1 system image, I got things up and running again.
Now for my question, instead of constantly carrying around the 2 USB drives holding the recovery and system image, can I create a recovery partition on my HDD that I can boot too if my SDD wipes again? (Could I copy or clone my Recovery USB to a partition on my HDD?) Then I could just keep the SSD system image on the HDD in case I need to restore it, right?
Disk 0: SDD disk that wiped itself
Disk 1: HDD that I'd like to have a recovery partition and system image on
I also have: Win 8 OEM system imageWin 8.1 system imageRecovery USB drive (8.1)Win 8.1 USB Install drive