I have win7 hp 64bit and i want to install win 8/8.1 on a separate partition(duel boot).
How do I do this? i do not want to upgrade I want to keep separate systems.
I had a computer with windows 7 home premium x64. A while ago I decided that I wanted to up grade to windows 8 and so I partitioned my os drive and installed (OEM) windows 8 Pro on the new partition. During the set up I was able to set up a duel boot system with windows 8 and windows 7. When I look at the drive structure I noticed that there isn't a system recovery partition for windows 7 or windows 8.
I would like to generate a system recovery partition for windows 8 and remove windows 7 but I am not sure how to go about doing this.
I currently have windows 8 installed. I wish to install another windows 8 os on a separate hdd on the same pc. I wish to do this because I share this pc with my brother who is paranoid that my constant tweaking somehow breaks his games installs. Is dual booting two windows 8 installations possible? If it is, what is the best way of going about it? I have an external hard drive that I backup all of my partitions to using acronis, so I'm not too worried about breaking something.
View 8 Replies View RelatedI have made my Windows 8.1 DVD, but I haven't committed to installing it yet.
I'd like to just install it on a separate partition on my second hard drive.
Normally I wouldn't hesitate to just go ahead and install it, but I'm not sure if the new Uefi bios will just except it and automatically set up the dual boot menus etc, the way that it did in the past.
Are there extra steps that I need to take before going ahead with the install.
I definitely don't want to replace my current Windows 8 install until the final version comes online at that time I will probably do a complete new install of all my software.
Dual install without using VM?
Will it be possible to boot Windows 8 from a GPT partition using BIOS (not UEFI)? I'll be using the 64bit version.
Technically, I know it's possible as I'm doing it with FreeBSD, many Linux distros etc. Using hybrid MBR/GPT, I've read others have Win7 booting off GPT partitons as all. I'd rather not go that route.
I'm trying to dual boot Windows 7 Ultimate 64-bit and Windows 8 Pro. I want to have each OS installed on separate Hard drives. I want the default OS to be Windows 7 (loads automatically) or goes to the boot manager screen and choose either Win 7 and Win 8.
I've been running Windows 7 on an SSD hard drive with a UEFI Boot. I'm looking to install Windows 8 on a WD Caviar Black 1 TB drive.
Steps taken:
-Burnt Windows 8 to DVD to boot and install from.
-Re-ordered boot order to boot from DVD
-Windows 8 install starts
-Windows 8 drive screen - format the WD Caviar Black 1 TB to install Windows 8 on.
-ERROR Message appears - Can't find media location (I didn't write it down but will on next install I will update). Something like 0x00007B. The solution I found was to disconnect my Windows 7 drive (and all other hard drives).
(Issue: won't that affect the set up of the dual boot?)
-Disconnected Windows 7 drive and was able to install Windows 8.
-After successful install of Windows 8 I re-started my system expecting to see the dual boot menu options. However, Windows 8 loaded directly.
-Changed boot drive order to SSD (with Windows 7) then WD 1TB Drive (with Windows 8). However, Windows 7 then loaded directly.
-I rebooted into Windows 8 and went to the boot order menu in Settings > Control Panel > System > Startup and Restore > (might be a few other tabs). The drop down box shows Windows 8 but no Windows 7.
So, I'm sure I did something wrong on the install. Any thoughts?
If the SSD is a UEFI boot should the WD 1TB (Win 8 install drive) be the same? Is it critical to have the Windows 8 drive connected while installing Windows 8 to the other hard drive? If so, I will have to solve the error message I get after formatting the WD 1TB drive during the Win 8 install. (I know not having the specific error code doesn't work - will update tonight with that info).
Also, I have a 2TB drive that I think has a MBR partition. Would that affect things? Should I even have that? I'll confirm that too. Just hoping to possibly get the ball rolling with answers.
I have Win 7 on a 60gb ssd hard drive. I would like to put another 60gb ssd drive in my computer and run win 8 off of this. Is it possible to run this as a dual boot system. Will I get the option to boot into either when I boot up.
View 4 Replies View RelatedI'm having trouble Windows 8 64bit on a computer. It gets near the end and when it comes to restarting, get this error code 0xc0000001 and saying windows failed to install. Also tried installing Windows XP and it does the same and also another hard drive to see if it was that but it still does it.
The computer is a mix of new and old bits from an other computer i used...
CPU - Intel 750 2.66ghz - old
Motherboard - Gigabyte GA-P55M-UD2 - old
Memory - 8gb - old
Hard drive - Seagate 350gb - New
Graphics Card - Nvidia GF210 - New
Don't understand why it won't install windows cos part of this computer worked fine and now something is wrong even though hasn't been used for a few months.
Downloaded WindowsBlue-ClientwithApps-64bit-English-X1899605.ISO from Microsoft Site Burned Into DVD and USB Flash Using Windows 7 USB DVD Download Tool After booting from DVD or USB i stuck at the fish logo !! and the screen is turned off after 2 or 3 minutes with activity in USB or DVD !!
tried it several times using different HDD with no success
Windows 8 Installation is OK without a single problem
Motherboard Gigabyte EP35-DS3L
Processor: Intel(R) Core(TM)2 Duo CPU E7200 @ 2.53GHz (2 CPUs), ~2.5GHz
Memory: 4096MB RAM
ATI Radeon HD 3650
HDD : SAMSUNG HD753LJ , WDC WD3200AAJS-00B4A0 and SAMSUNG HD154UI
My system in HP Pavilion g6 with 64bit processor but am running 32bit. I would like to install 64bit because all the software I need for my project as an Architectural student were all 64bit based softwares. I need a step by step on how to do this.
View 4 Replies View RelatedI upgraded to Windows 8 from XP via unlock key without CD, forgetting that it'd be 32bit too.. I'm making a rebuild soon and I think 64bit would really benefit me, apart from some programs I use that are being discontinued in 32bit. A friend of mine recently upgraded to Win 8 too, but he bought the CD. Could I use his CD to overwrite my Win 8 32bit with a 64bit one? And another question: if I could (and I hope I can) is there an option during install to leave some free space for Linux? Having Windows 8 only is not safe ..
View 7 Replies View RelatedI have a copy of Windows 8.1pro 64 bit which I run on my main computer, I have an old laptop which is about 7-8 years old, I'd like to install a copy of Win 8 for test purposes and mess around with for a few months.
The laptop is so old it won't let me install 64 bit, is there a 32 bit version on the disk hidden away I could install or are they totally separate disks?
Is it possible to download a copy which would work for 30 days without entering a serial number or even an old beta copy.
I have win 8 pro installed & two HDDs with two partions each , I want to migrate the boot partition to another partition on the second drive .
It would have been easier if i would have just cloned the complete drives but one of the partions on the 2nd drive has data which cannot be deleted .
So I have Drive
1 - Partitions C: ( boot partition ) & D:
Drive 2 - Partitions E: & F:
I want to remove Drive 1 from my PC so i want to copy C: to E: then remove drive 1 & boot from E:
I tried "Easeus todo backup" , did not work, it does not make the copy bootable , to make it bootale the whole drive has to be copied .
I tried making an image of C: using Windows 8 inbuilt backup feature then removed drive 1 , installed Windows 8 on E: then tried restoring the image of C: but i got some error.
I have been given a dell inspiron 531 with 64 bit AMD processor, running 32 bit vista home basic, that has responded well to RAM upgrade to 4GB.
I want to install 64 bit win 8 pro media centre which I have on an original MS CD. either over current vista or on separate partition as dual boot.
For some reason the dell wont read the MS win 8 64 disk (or any other original MS OS disks I have (vista-32/7-64/8-32)) but reads pretty much everything else (DVD's excepted as currently has no DVD reading software.)..either through explorer or during boot..it is not only original ms discs that are a problem as dell won't read Windows 8-64 enterprise trial iso I burned myself either.
I have tried turning off security software (MS security essentials/MS firewall)..no change.
CD's all read fine via explorer on my lightly hopped up HP tx1340ea running win 8-64 pro media centre.
I want install another copy of windows 8 on another partition. This is useful in installing different group of programs so I boot the suitable one related to specific problems. Moreover you can delete a problem file from the other partition.
View 4 Replies View RelatedI partitioned a 1 Tb drive with windows 8 on first partition. Trying to install windows 7 on 2nd partition. Will boot from DVD & load files but when windows tries to open it stops & must restart computer to get out of freeze. Computer is Gateway DX4860-UR28.
View 4 Replies View RelatedI am currently running windows 8 64bit OS. I have a windows 7 32bit .iso file. I want to install the windows 7 32 bit while keeping the windows 8 64bit too.
View 7 Replies View RelatedI built up a new PC featuring a brand new SSD (i.e fully unallocated). Then, I made a clean install of Windows 8.1 pro (64bits) using an ISO DVD. Using Windows disk management tool after the install, I can see that only two partitions have been created: one System partition in NTFS (350MB) and the remaining of the SSD is the C: partition while I was expecting a third one : a recovery partition. Of course, I do not remember a prompt during the install to ask whether I want a recovery parttion or not.
Is it normal ? Is a recovery partition useful knowing I have the install DVD ? If the recovery partition has some advantages, is there a way to create it after the install is completed ?
I swapped the HDD with a new blank SSD in T530 and booted it with the recovery USB of windows 8. System boots from the USB and gives refresh, reset, and other options. However, when I select reset ( to fresh isntall the OS on the SSD), it fails saying a required partition is missing. What! I'm using a blank SSD, shouldn't the installer present me with options to format and use the drive rather than erring out?
Is there any better way of installing the windows 8 os on a new blank SSD using the recovery USB?
I do have gParted live USB. If nothing works, I will partition the SSD using gParted and try the Windows 8 recovery USB again.
Windows 8 creates its own hidden recovery partition during the install. In my case, it's 450MB.
I know not to touch this partition, and I'd like to know what's in that partition and how it's used.
im using acer aspire p3, and wish to install a clean Windows 8 cause the hard disk capacity just 58gb and system take around 30gb.
i try to install Windows 8 wif a usb drive inside window, but it seems giving me error: we count install Windows 8 to your pc
then i try to boot wif usb, and i found tat i cant install too because the main partition is oem reserved, any i dea i can install a new clean window?
I have a new HP envy t215 desktop with intel I7 Processor on a Megatrends MB with an EFI partition. The computer came with windows 7 pro but I want to temporally installWindows 8.
I want to remove the hard drive with Windows 7 Pro and insert a new 1TB Sata drive for a fresh install of windows 8. I have an almost new 1TB Sata WD hard drive formatted GPT/NTFS.I have completely wiped the hard drive. I will have to have the EFI partition on the windows hard drive.
The real question is will the windows 8 OEM software create the correct partitions when the system is installed.I know I need the EFI partition and the operating system partition at a minimum.
I tried to install 32 bit Windows 8 in my friends laptop through bootable usb. It has win7 preloaded. I tried for the dual boot. But when I select the partition drive it said that windows cannot be install in that drive because the selected drive is GPT partition style. How to install Windows 8 os in that GPT partition style hard drive.
Laptop has Hard disk-500 gb,64 bit win7.
I already have windows 8.1 installed in c: partition
I have created new partition ''New Volume :" to install windows server 2008 on it ,but when I try to boot from the CD to install it this message appear
"Windows cannot be installed to this Hard disk space . The partition contain one or more volumes that are not supported for installation" ...
This is screenshot of disk management ...
Lenovo g505 History - What I did so far, is further down Computer went badly wrong and would not Boot into Windows (belongs to my mates 11 year old) I decided to a Factory Restore it seemed the best Option as my knowledge stops, til now, at Win 7 I did it, but it doesnt Boot into Windows CURRENT I have the HDD connected to another computer which is running Win 7 I can now see that it did indeed do a Restore to the System Partition Pic Shows Disk in Disk Management
Pic shows content of Windows8 Drive
Pic shows content of the Windows8 Windows Folder
PDF of the 3 Pics - easy to read detail
In Disk Management I see 7 Partitions Now I think I understand what the Problem is - ?too many Partitions? But I dont have a clue how to Resolve it correctly My inclination is to Run DiskCheck from Win7 on the HDD but I am not sure if that will work on Windows 8? same with FixBoot if it is Possible? The LENOVO H Drive has 3 Folders with Data in it Lenovo & Drivers & Applications
HISTORY
I did the Restore
took 3 hours
but then said Success
Option to Reboot or Shutdown
Chose Reboot
eventualy Booted to a Windows Pale Blue screen with the Cursor half hour later, the Box came up to start the Restore again I did it, same as above time and Result so this time I chose Shut Down Started - Logo for long time then loading Files and back at the Box to Start Restore again
I have since tried booting with Default Options UEFI and Legacy in the BIOS In the middle of all this, as it is about 4 hours to do the restore.
Lenovo g505
History - What I did so far, is further down. Computer went badly wrong and would not Boot into Windows. I decided to a Factory Restore, it seemed the best Option as my knowledge stops, til now, at Win 7. I did it, but it doesnt Boot into Windows.
CURRENT
I have the HDD connected to another computer which is running Win 7
I can now see that it did indeed do a Restore to the System Partition
Pic Shows Disk in Disk Management
Pic shows content of Windows8 Drive
Pic shows content of the Windows8 Windows Folder
PDF 3 Pics to read Details
Lenovo hdd.pdf
In Disk Management I see 7 Partitions. Now I think I understand what the Problem is - ?too many Partitions? But I dont have a clue how to Resolve it correctly. My inclination is to Run DiskCheck from Win7 on the HDD but I am not sure if that will work on Windows 8? Same with FixBoot if it is Possible? The LENOVO H Drive has 3 Folders with Data in it Lenovo & Drivers & Applications.
HISTORY
I did the Restore, took 3 hours, but then said Success
Option to Reboot or Shutdown
Chose Reboot
Eventually Booted to a Windows Pale Blue screen with the Cursor half hour later, the Box came up to start the Restore again I did it, same as above time and Result so this time I chose Shut Down Started - Logo for long time then loading Files and back at the Box to Start Restore again I have since tried booting with Default Options UEFI and Legacy in the BIOS In the middle of all this, as it is about 4 hours to do the restore.
How to make a clean install on my Samsung Series 5 550P5C, but I hear from here to there that when I do it I will delete my Recovery Partition (which I would like to have on the disc in some radical case). However I saw a thread when someone performed a clean install and didn't lost the recovery partition. Additionally I think it should not be able to remove it installing Windows on C partition, as this is another partition on the disc - than Recovery part.
View 5 Replies View RelatedI used to have System Reserved on separate partion to C: but on my last fresh re-install, I decided to make C: and System Reserved in one partition. Here's what shows on Disk Management:
My question is, which is better. System Reserved on the same partition with C: or on a separate partition?
I lost my restore link to the recovery partition after i installed another version of windows.
This is a ASUS x550L with a pre-installed Windows 8 inside. What i need to do is set my recovery partition as active, boot from there, use that to reformat/re-install windows on drive C. I just dont know how to do it.
Booting Asus recovery partition.
Set boot partition as Active partition.
I wish to upgrade my pc from Windows 7 Home Premium 64 to Windows 8 Professional 64.
I have purchased and received the Windows 8 Professional (Upgrade Edition) 32/64 DVDs.
Do I need to disable Norton Internet Security (NIS) 2013, before I proceed with the upgrade (Keeping all apps, settings, and files) ?
Would I need to reinstall NIS 2013 after upgrade is completed ?
How long (on average) am I looking for the upgrade to fully complete from start to finish ?
And finally, does everything transfer successfully (as I'll be using the 'Keep all apps, settings, and files' option) ?
While I was messing around with my laptop, I decided to add on a fourth operating system, Arch Linux. I suppose I was pushing my luck a bit . Anyways, during the installation, I accidentally deleted the EFI system partition from my laptop, which contained the Windows Boot Manager and necessary files to boot. Great. I only made things worse by trying to troubleshoot, and broke grub as well.
I have a Windows 8 repair disk I made using the Windows 8 built in utility, but it does not boot: the computer turns on, and just hangs at the Toshiba splash screen.
I also can obviously not access the Toshiba recovery partitions, as they are booted into just like Windows itself.
I found a bootx64.efi file on one of my system's recovery partitions (Toshiba seems to have some really complex system going on) and placed it in EFIootootx64.efi. According to this site, FGA: The EFI boot process., I need to place the bkpbootmgfw.efi (on my system, that was what it was called, but I suspect boot-repair (ubuntu tool) messed something up when I was first setting up grub and the ESP and the bkp stands for backup) back onto the EFI System Partition.
Where to look for in the various Windows Imaging Format .wim and .swm files I have laying around my recovery partition(s) in order to extract the necessary EFI files. Any Windows Repair iso that works.