Setup Installation :: Install Win 8 Pro On Win 7 Pro Desktop With EFI Partition
Jun 7, 2014
I have a new HP envy t215 desktop with intel I7 Processor on a Megatrends MB with an EFI partition. The computer came with windows 7 pro but I want to temporally installWindows 8.
I want to remove the hard drive with Windows 7 Pro and insert a new 1TB Sata drive for a fresh install of windows 8. I have an almost new 1TB Sata WD hard drive formatted GPT/NTFS.I have completely wiped the hard drive. I will have to have the EFI partition on the windows hard drive.
The real question is will the windows 8 OEM software create the correct partitions when the system is installed.I know I need the EFI partition and the operating system partition at a minimum.
I want install another copy of windows 8 on another partition. This is useful in installing different group of programs so I boot the suitable one related to specific problems. Moreover you can delete a problem file from the other partition.
I partitioned a 1 Tb drive with windows 8 on first partition. Trying to install windows 7 on 2nd partition. Will boot from DVD & load files but when windows tries to open it stops & must restart computer to get out of freeze. Computer is Gateway DX4860-UR28.
I already have windows 8.1 installed in c: partition
I have created new partition ''New Volume :" to install windows server 2008 on it ,but when I try to boot from the CD to install it this message appear
"Windows cannot be installed to this Hard disk space . The partition contain one or more volumes that are not supported for installation" ...
I built up a new PC featuring a brand new SSD (i.e fully unallocated). Then, I made a clean install of Windows 8.1 pro (64bits) using an ISO DVD. Using Windows disk management tool after the install, I can see that only two partitions have been created: one System partition in NTFS (350MB) and the remaining of the SSD is the C: partition while I was expecting a third one : a recovery partition. Of course, I do not remember a prompt during the install to ask whether I want a recovery parttion or not.
Is it normal ? Is a recovery partition useful knowing I have the install DVD ? If the recovery partition has some advantages, is there a way to create it after the install is completed ?
How to make a clean install on my Samsung Series 5 550P5C, but I hear from here to there that when I do it I will delete my Recovery Partition (which I would like to have on the disc in some radical case). However I saw a thread when someone performed a clean install and didn't lost the recovery partition. Additionally I think it should not be able to remove it installing Windows on C partition, as this is another partition on the disc - than Recovery part.
I swapped the HDD with a new blank SSD in T530 and booted it with the recovery USB of windows 8. System boots from the USB and gives refresh, reset, and other options. However, when I select reset ( to fresh isntall the OS on the SSD), it fails saying a required partition is missing. What! I'm using a blank SSD, shouldn't the installer present me with options to format and use the drive rather than erring out?
Is there any better way of installing the windows 8 os on a new blank SSD using the recovery USB?
I do have gParted live USB. If nothing works, I will partition the SSD using gParted and try the Windows 8 recovery USB again.
I tried to install 32 bit Windows 8 in my friends laptop through bootable usb. It has win7 preloaded. I tried for the dual boot. But when I select the partition drive it said that windows cannot be install in that drive because the selected drive is GPT partition style. How to install Windows 8 os in that GPT partition style hard drive.
Last week, I tried to dual-boot install Fedora Linux onto my Windows 8.1 PC (Asus CM1435 Desktop). I resized the Data Partition (not OS partition) by 100GB. I then restarted the PC, and Fedora seemed to work okay, however, I could not got Windows to start anymore. I then turned on Secure Boot and other Windows 8-optimized settings and tried to start up again; it did not work, Windows could not boot. I tried to search up some details on how to fix this problem, and I came across bcdboot and bootrec commands, and ran them (/fixmbr, /fixboot, /rebuildbcd), however, there was no luck, as /rebuildbcd gave me a 0 disks found error. I also followed the instructions here [URL] At this point, "Windows Bootloader" disappeared from the BIOS. Restarting resulted in a "Missing Operating System" error.
I tried using a Windows 8 installation disk, and tried Reset and Refresh, but neither worked. Reset gave me "Recovery Partition could not be found" (was still there, just got messed up in the resize or something), and Refresh gave me "Disk where windows is located is locked" (perhaps from fast reboot?) Then, I gave up all hope on the current installation. I booted into my Windows 8 recovery disk, formatted C:, and installed it from there. When it got to "Windows needs to restart to continue", restarting put me to "Missing operating system", and I could not continue the installation. I tried it again, (formatted and ran again), but no luck there. TLDR: Installing Linux broke Windows. Deleted Linux and could not reinstall Windows from repair disk. Formatted partition for Windows and used Windows 8 disk to reinstall, but errors.
Current Issue: Cannot install
Deleted all partitions except a factory recovery partition and a data partition. SYSTEM partitions and boot partitions were deleted.
Put Windows 8.1 disk in, installed into unallocated space. After installation got to the "Restart Needed" part, PC restarts and does NOT continue installation. I looked at the partitions the setup installer made, and it seems everything is correct (MSR's, EFI boot partition, etc). However, PC won't boot from Windows Bootloader. My PC is on a GPT disk, UEFI BIOS. Windows Bootloader used to be listed in the UEFI menu, but now it is not listed, and cannot be booted to it. When I disable UEFI and boot, I get "Missing Operating System". With UEFI, it just says I need to disable it to boot.
I have win 8 pro installed & two HDDs with two partions each , I want to migrate the boot partition to another partition on the second drive .
It would have been easier if i would have just cloned the complete drives but one of the partions on the 2nd drive has data which cannot be deleted .
So I have Drive
1 - Partitions C: ( boot partition ) & D:
Drive 2 - Partitions E: & F:
I want to remove Drive 1 from my PC so i want to copy C: to E: then remove drive 1 & boot from E:
I tried "Easeus todo backup" , did not work, it does not make the copy bootable , to make it bootale the whole drive has to be copied .
I tried making an image of C: using Windows 8 inbuilt backup feature then removed drive 1 , installed Windows 8 on E: then tried restoring the image of C: but i got some error.
I'm trying to recreate win 8.1 pro system reserved partition on my ssd. Initially I installed windows on my ssd (c: ) and windows created the sysres partition on my unformatted hd (without telling me anything). After some trouble I managed to be able to boot from ssd directly without going through the sysres partition on the hd. Now if possible I'd like to recreate the sysres on the ssd (by disconnecting my hd so that windows has no other options than creating this on the ssd). If a try a system refresh it tells me it would wipe away all my user installed apps.
Is it possible not to have the partition "recovery"?
Because if you look at the two tutorials:
- UEFI (Unified Extensible Firmware Interface) - Install Windows 7 with - Windows 7 Forums
- UEFI (Unified Extensible Firmware Interface) - Install Windows 8 with
In the tutorial to install Windows 7 in UEFI, there is not that damn partition recovery, while in the tutorial for Windows 8, we can see it.
When I install Windows 7 (MBR mode), I avoid this partition "recovery" by creating a partition with a name before installation. I install the OS on it and everything is fine, no partition "recovery" But here, since one must delete all partitions, If I create a GPT disk with a partitioning tool before installing, is that it might be appropriate?
I just got a new laptop, a Lenovo X230, for which I paid extra to have the OS on it as Windows 8 Pro.
So--now I have it, and Win 8 Pro 64 is installed and activated on it. I am a legal owner of Win 8 Pro.
However, I would like to do a clean install of Win 8 on the computer, to have it free of bloatware, etc. (In fact, I would like to set up a multi-boot with Win 7, and perhaps even triple boot with Xp as well. (I have installation media and my product keys for XP and 7 though, so those are not really a problem.)
The computer came with no discs at all. There is a procedure to make recovery disks. I may do that, but I think those will be to restore the computer to how it came from the factory, and therefore not usable for a clean install.
I don't see my product key for Win 8 anywhere. Not on the computer, not on any kind of card that came with it, etc.
I looked at the tutorial here for clean install of Windows 8, but it requires an install disc and product key. I have neither, although I am a legal owner of Windows 8.
Is there a way I can create (from my installed Windows 8) a win 8 install disk, that can be used for a clean install? Or a link to download one? Is there a way I can get my product key?
I recently picked up an Asus laptop, a SDD to replace the the laptop's HDD, and a HDD caddy to hold the HDD in place of the CD/DVD drive. After a fresh Win 8.1 install on the SDD, I made system images of both the SDD and the HDD with the Win 8 OEM install (both stored on external drive). I also created a USB recovery drive and then formatted the HDD.
Fast forward a few weeks... It's last Friday. I'm about to leave for a business trip. I boot up my laptop and a screen comes up telling me to "reboot and select proper boot device". I pull the SDD out, hook it up to my desktop, and see that the drive shows up, but it's blank. A little googling turned up a few reviews from other people with the same issue. On rare occasion, it will wipe itself. Using the USB recovery drive and the Win 8.1 system image, I got things up and running again.
Now for my question, instead of constantly carrying around the 2 USB drives holding the recovery and system image, can I create a recovery partition on my HDD that I can boot too if my SDD wipes again? (Could I copy or clone my Recovery USB to a partition on my HDD?) Then I could just keep the SSD system image on the HDD in case I need to restore it, right?
Disk 0: SDD disk that wiped itself Disk 1: HDD that I'd like to have a recovery partition and system image on
I also have: Win 8 OEM system imageWin 8.1 system imageRecovery USB drive (8.1)Win 8.1 USB Install drive
Lenovo g505 History - What I did so far, is further down Computer went badly wrong and would not Boot into Windows (belongs to my mates 11 year old) I decided to a Factory Restore it seemed the best Option as my knowledge stops, til now, at Win 7 I did it, but it doesnt Boot into Windows CURRENT I have the HDD connected to another computer which is running Win 7 I can now see that it did indeed do a Restore to the System Partition Pic Shows Disk in Disk Management
Pic shows content of Windows8 Drive
Pic shows content of the Windows8 Windows Folder
PDF of the 3 Pics - easy to read detail
In Disk Management I see 7 Partitions Now I think I understand what the Problem is - ?too many Partitions? But I dont have a clue how to Resolve it correctly My inclination is to Run DiskCheck from Win7 on the HDD but I am not sure if that will work on Windows 8? same with FixBoot if it is Possible? The LENOVO H Drive has 3 Folders with Data in it Lenovo & Drivers & Applications
HISTORY I did the Restore took 3 hours but then said Success Option to Reboot or Shutdown Chose Reboot eventualy Booted to a Windows Pale Blue screen with the Cursor half hour later, the Box came up to start the Restore again I did it, same as above time and Result so this time I chose Shut Down Started - Logo for long time then loading Files and back at the Box to Start Restore again
I have since tried booting with Default Options UEFI and Legacy in the BIOS In the middle of all this, as it is about 4 hours to do the restore.
I have a dell laptop with win 8 on it that it came win. the recovery partitions are intact etc. only thing not intact is the OS partition. the recovery of course fails because of the partition missing.
Is there a command i can type in diskpart to recreate the partition and successfully restore the os with the recovery built in?
My disk situation is as in the attached screenshot. I have two Windows 8 installed on 2 different partitions of the same SSD. Now I would like to remove the first installation, Windows 8 (H: )
The problem is that the Windows 8 (H: ) partition is marked as System, Active so from reading the forum I know there may be some problems with bootmgr... but I can't understand exactly what to do.
Need to move partition over, did a minimal image restore with my new laptop. What it does is skip the recovery partition setup. So instead of 4 partitons I have 3. The problem is the first partition is now a 401 mb unallocated partition, the second is the EFI partition, and c: drive is last. When attempting to move unallocated 401 mb to the end of drive, so I can extend it, the program I use, EaseUS partiton does not "see" the first 401 mb and intead shows 0.0 unallocated space. Because of this I cannot resize/move the partition. What other method is there to remedy the situation.
My son's laptop (Windows 8) failed, and despite F9 options to reset or refresh, and CHKDSK was unable to recover the system due to bad disk sectors. I bought a new disk , but as I had made no recovery media, and the OEM doesn't supply any, I have no way of reinstalling Windows 8.
However I did mange to install Ubuntu Linux on the new disk and the Laptop is now working fine. Out of curiosity I connected the old bad disk via a USB enclosure, and lo and behold Disk utility was able to read the OEM Recovery and Restore partitions. I have made several copies of these on a Win 7 laptop, USB and LInux partitions, and all look good (as far as i can tell).
My issue is that as the OEM recovery partitions seem fine, I reckon they should be installable onto the new disk, but I am at a loss as to how I can use this data to reinstall Win 8 onto my laptop. Most of the advice I can see assumes a working copy of WIn 8 or having a retail Win 8 ISO, which of course I do not have. Remember , unlike Win 7, WIn 8 has no product key identifiable as it is contained in the BIOS somewhere, but I reckon it should recognise the OEM's recovery partition if I only could manage to load it.
I now have a sketchy knowledge of lots of new terms (mounting , partitioning, MBRs, boot sequences etc ) so exactly what to do. [ The tutorial on this form requires a retail win 8 ISO]. I did find a Linux method involcing DD, DDRESCUE , PARTPROBE etc ) which I have tried but all to no avail - I am sure I was close though! ]
I had a Windows 7 laptop until I decided to upgrade it to Windows 8. What I did was create a partition on the Windows 7 side and went through setting up the dual boot process with no problems. Now, after using Windows 8, I would like to expand the partition size on the Windows 8 side since I only created about 30GB and Windows 8 will become my primary. So, what I was wanting to know is how easy or difficult is it to resize he partition without corrupting the OS.The closest I found was from this link Dual Boot Windows 7 and Windows 8 - Delete Windows 7 which discusses how to delete the old Windows 7 partition. Would this work on reducing the Windows 7 partition as well? I am thinking it should? I have backed up both partitions using True Image and there really isn't any valuable data on the laptops, so not concerned about losing anything.
Earlier today, I decided to do a fresh install from my retail CD of Windows 8. Windows 8 was my existing OS. (I just wanted to start fresh). For some reason, it did not create the usual two additional small partitions (system reserved and one called recovery). Everything seemed to work alright, but was wondering why this happened (only the C: partition was created).
History - What I did so far, is further down. Computer went badly wrong and would not Boot into Windows. I decided to a Factory Restore, it seemed the best Option as my knowledge stops, til now, at Win 7. I did it, but it doesnt Boot into Windows.
CURRENT I have the HDD connected to another computer which is running Win 7 I can now see that it did indeed do a Restore to the System Partition Pic Shows Disk in Disk Management
Pic shows content of Windows8 Drive Pic shows content of the Windows8 Windows Folder PDF 3 Pics to read Details Lenovo hdd.pdf
In Disk Management I see 7 Partitions. Now I think I understand what the Problem is - ?too many Partitions? But I dont have a clue how to Resolve it correctly. My inclination is to Run DiskCheck from Win7 on the HDD but I am not sure if that will work on Windows 8? Same with FixBoot if it is Possible? The LENOVO H Drive has 3 Folders with Data in it Lenovo & Drivers & Applications.
HISTORY I did the Restore, took 3 hours, but then said Success Option to Reboot or Shutdown Chose Reboot
Eventually Booted to a Windows Pale Blue screen with the Cursor half hour later, the Box came up to start the Restore again I did it, same as above time and Result so this time I chose Shut Down Started - Logo for long time then loading Files and back at the Box to Start Restore again I have since tried booting with Default Options UEFI and Legacy in the BIOS In the middle of all this, as it is about 4 hours to do the restore.
Ok so i am trying to install windows 8 X64 onto a different hard drive as windows 7 so i can switch between the two at startup.Ok so my problems started yesterday when trying to install windows 8 onto the Hard Drive i was getting"Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks."To fix this i converted the disk to a GPT disk in Disk ManagerNow im getting the Error "Setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more Information." Here is a screenshot of disk manager at the moment.I am trying to install Windows 8 to Disk 2.
I have some problems with my laptop ASUS K55VD. I had windows 8, but with the store of windows I have updated to windows 8.1.
I have tried to use the recovery partition, but every time I try appears a message. Failed to reset your computer. A partition of unity necessary is missing. For that reason I have looking for some information, and with CMD commands like "diskpart". I have noticed that I have 8 volumen.
And in Computer Management appears this.
Then googling recommend to use EaseUS Partition, and some many things change. In the beginning, I had the same 3 partions in red and I don't know what happened.
But in diskpart change too, and I only have 4 volume, and it have dissapeared the recovery partition, and I don't know why?
Before to use EaseUS partition I have created a USB booteable with 9.79gb, and I had this:
But, in this days I have tried to create the USB booteable again, but I can't. And everytime I have tried to run the usb, appears to select the language, the keyboard, and then appears the same windows with troubleshoting and turn off (it returns at the previous windows in blue)
