Setup Installation :: Can't Install Windows 8.1 On Asus Desktop
Aug 7, 2014
Last week, I tried to dual-boot install Fedora Linux onto my Windows 8.1 PC (Asus CM1435 Desktop). I resized the Data Partition (not OS partition) by 100GB. I then restarted the PC, and Fedora seemed to work okay, however, I could not got Windows to start anymore. I then turned on Secure Boot and other Windows 8-optimized settings and tried to start up again; it did not work, Windows could not boot. I tried to search up some details on how to fix this problem, and I came across bcdboot and bootrec commands, and ran them (/fixmbr, /fixboot, /rebuildbcd), however, there was no luck, as /rebuildbcd gave me a 0 disks found error. I also followed the instructions here [URL] At this point, "Windows Bootloader" disappeared from the BIOS. Restarting resulted in a "Missing Operating System" error.
I tried using a Windows 8 installation disk, and tried Reset and Refresh, but neither worked. Reset gave me "Recovery Partition could not be found" (was still there, just got messed up in the resize or something), and Refresh gave me "Disk where windows is located is locked" (perhaps from fast reboot?) Then, I gave up all hope on the current installation. I booted into my Windows 8 recovery disk, formatted C:, and installed it from there. When it got to "Windows needs to restart to continue", restarting put me to "Missing operating system", and I could not continue the installation. I tried it again, (formatted and ran again), but no luck there. TLDR: Installing Linux broke Windows. Deleted Linux and could not reinstall Windows from repair disk. Formatted partition for Windows and used Windows 8 disk to reinstall, but errors.
Current Issue: Cannot install
Deleted all partitions except a factory recovery partition and a data partition. SYSTEM partitions and boot partitions were deleted.
Put Windows 8.1 disk in, installed into unallocated space. After installation got to the "Restart Needed" part, PC restarts and does NOT continue installation. I looked at the partitions the setup installer made, and it seems everything is correct (MSR's, EFI boot partition, etc). However, PC won't boot from Windows Bootloader. My PC is on a GPT disk, UEFI BIOS. Windows Bootloader used to be listed in the UEFI menu, but now it is not listed, and cannot be booted to it. When I disable UEFI and boot, I get "Missing Operating System". With UEFI, it just says I need to disable it to boot.
I got a new ASUS x751M with a freedos and I tried to install win 8.1 the ordinary way (burnd a dvd). Changed boot priority to the dvd rom also enabled launch CSM. Also when I tried to launch efi shell it just said not found.
After reading many threads about this UEFI stuff, i'm confused. I have a Asus Sabertooth z77 motherboard and will be fresh installing windows 8.1 full to Samsung 250gb ssd. I'm not quite getting what i'm supposed to configure on the MB for UEFI boot prior to installing the windows 8.1.
I have a new HP envy t215 desktop with intel I7 Processor on a Megatrends MB with an EFI partition. The computer came with windows 7 pro but I want to temporally installWindows 8.
I want to remove the hard drive with Windows 7 Pro and insert a new 1TB Sata drive for a fresh install of windows 8. I have an almost new 1TB Sata WD hard drive formatted GPT/NTFS.I have completely wiped the hard drive. I will have to have the EFI partition on the windows hard drive.
The real question is will the windows 8 OEM software create the correct partitions when the system is installed.I know I need the EFI partition and the operating system partition at a minimum.
I have some problems with my laptop ASUS K55VD. I had windows 8, but with the store of windows I have updated to windows 8.1.
I have tried to use the recovery partition, but every time I try appears a message. Failed to reset your computer. A partition of unity necessary is missing. For that reason I have looking for some information, and with CMD commands like "diskpart". I have noticed that I have 8 volumen.
And in Computer Management appears this.
Then googling recommend to use EaseUS Partition, and some many things change. In the beginning, I had the same 3 partions in red and I don't know what happened.
But in diskpart change too, and I only have 4 volume, and it have dissapeared the recovery partition, and I don't know why?
Before to use EaseUS partition I have created a USB booteable with 9.79gb, and I had this:
But, in this days I have tried to create the USB booteable again, but I can't. And everytime I have tried to run the usb, appears to select the language, the keyboard, and then appears the same windows with troubleshoting and turn off (it returns at the previous windows in blue)
Recently my computer has been encountering problems involving speed and whatnot, and I have found no method of fixing them. I have been looking to reset my PC, and went to do so through the built-in tool that is supplied on my ASUS laptop, by pressing F9 at startup. I chose to reset my PC, but it returned an error saying the recovery partition couldn't be found. So I went to do so through the PC settings, and it rebooted my computer and told me the reset failed. I checked and found the recovery partition using MiniTool Partition Wizard, so it still exists.
Apparently this is an error other ASUS users have found after updating to Windows 8.1. I don't know how to solve this problem, and figured I may as well reinstall a fresh copy of Windows 8 without all the ASUS bloatware and garbage. So I hunted for a Windows 8 ISO file, and failed. I've tried multiple methods. One involving using a product key to download Windows 8 to an ISO file through Microsoft's Windows 8 Setup, and that failed because the product key was OEM BIOS-based, and not retail.
I can either try and do a factory reset by somehow fixing the recovery partition through some miracle, or;With extreme luck find a Windows 8 Core ISO setup, and install that and refind the drivers for my PC.
I've bought a new laptop , it's an Asus K95 series. (K95VB)
Since it has an open slot for a second drive i also bought an SSD for it , a Crucial M500 240Gb if that should matter.
So the laptop comes preinstalled with windows 8. There are no discs (recovery,repair,...) with the system. (a google search learned that this is normal)
Offcourse i want my laptop to run the Windows 8 from the SSD instead of the 1TB HDD (wich is actually a 3.5" , first time i see that in a laptop ).
1) What is the best way to do this ? Clone , fresh install , recover to SSD ? (alltough it seems the last one isn't possible)
I know a clean install is always the best way but since i don't have any Windows 8 disk to install from , i don't know how ... (read as : can you do a fresh install with a recovery disk ?)
2) How do i do it ? (a nice step by step if possible)
3) If i manage to do it , what do i do with the original HDD ?
Because it has 5 partitions now : 100MB (EFI-systempartition) - 900MB (recoverypartition) - 20,01GB (recoverypartition) - and a C and D (OS and Data).
Can/may they be deleted ? (want to use this just for data , all progams/games/apps will go to the SSD offcourse)
Haven't installed anything yet , just turned it on and did the basic installation stuff Windows 8 asks for the first time.
Not a noob to pc/laptop installs , but new to Windows 8 and it looks like it changed a bit since W7 and everything before that.
I've just received an Asus S301L laptop, with Windows 8 Pro preinstalled. The owner wants Windows 8 wiped and Win7 installed along with Scientific Linux.
I've disabled secure boot and enabled CSM in the BIOS, thus getting rid of the annoying UEFI boot process, and I'm now able to boot old-style from thumbdrives and whatnot.
My question is: given this partition configuration as shown by gparted, is it safe to wipe the whole damn thing and repartition from scratch, or will I run into bootup problems with the BIOS not seeing stuff where it wants to see it (like that suspicious FAT32 partition labeled "boot")?
I imagine this isn't a problem since I disabled everything UEFI, but better safe.
I just got a new laptop, a Lenovo X230, for which I paid extra to have the OS on it as Windows 8 Pro.
So--now I have it, and Win 8 Pro 64 is installed and activated on it. I am a legal owner of Win 8 Pro.
However, I would like to do a clean install of Win 8 on the computer, to have it free of bloatware, etc. (In fact, I would like to set up a multi-boot with Win 7, and perhaps even triple boot with Xp as well. (I have installation media and my product keys for XP and 7 though, so those are not really a problem.)
The computer came with no discs at all. There is a procedure to make recovery disks. I may do that, but I think those will be to restore the computer to how it came from the factory, and therefore not usable for a clean install.
I don't see my product key for Win 8 anywhere. Not on the computer, not on any kind of card that came with it, etc.
I looked at the tutorial here for clean install of Windows 8, but it requires an install disc and product key. I have neither, although I am a legal owner of Windows 8.
Is there a way I can create (from my installed Windows 8) a win 8 install disk, that can be used for a clean install? Or a link to download one? Is there a way I can get my product key?
I was playing around with my OS dual booting them from Windows 8, W7 and XP but I accidentally erased my recovery partition. The bios i have is different from anything I've seen before. To boot from a cd/dvd i had to enable launch csm and secure boot control. Its the asus Q500a laptop. I just wanna know if i can download the recovery partition from somewhere and put it in my hdd.
I have an Asus P5QL VM DO montherboard in my homemade PC. This is an older system that I use for testing, so I put my Windows 8 install on it. Unfortunately, the Asus driver installation CD will not run in Win 8, and I am missing one driver which I am unable to locate anywhere. It is for the PCI Simpe Communications Controller.
I have an ASUS VivoBook X200CA that is running a Windows 8.1 Upgrade. For about 5 months, this laptop has been running perfectly without any problems and I have managed to reset the computer many times due to certain errors and problems that have arisen from software and hardware compatibility.
Recently, I went to reset my laptop, it restarted and then it took me to the WinRE screen. I went into Troubleshooting > Advanced Options and I clicked on the Reset option. It then took me through each of the various warnings and making sure that my data was backed up and then, once I had clicked on the "Reset" button, it hung for a bit and then said "Reset has failed - Required Partition is Missing".
Seen as my Windows 8.1 installation may be completely useless, I am going to booting up from BIOS. I have been putting Windows 7 (32-bit) on my USB drive and when I boot it with my laptop it shows up and says "Reboot and select proper device or insert boot media and press key". I have some important exams coming up and I need to do some revision - plus this is my only laptop!
I have a brand new ASUS G750JX running Win 8. The OS is on a 750 GB HDD and I would like to install a 256 GB SSD and move the OS and a few programs to the SSD. Can I clone the drives than use 750 GB HDD for storage? Or is the a better way of moving all the stuff to my SSD?
I just bought an ASUS VivoBook S551LB laptop which comes with Windows 8. It has a 1TB harddrive and an extra 24GB SSD which is used for cache i guess. I wanted to reinstall Windows 8 because I didn't want to use the OEM version. Doing that took enough work. But after reinstalling i decided to check if the cache drive was still working. The Disk Management interface showed that the SSD was empty when previously it was completely full, so I guessed that the cache needed to be set up again.
I installed everything from my laptop's driver page and ran windows update until there were no more updates left. I looked in every ASUS and Intel application installed on the computer for options regarding the cache drive but there was nothing. The Condusiv ExpressCache program had no gui and the command line didn't work, and the Intel Rapid Storage Technology program wasn't showing most of the options which other people have.
I read lots of threads and everything seemed to point to the need for RAID. I tried the registry edits, BIOS options (and with safe boot), and looking for RAID drivers for my laptop. The BIOS only has the option for AHCI, and there are no RAID drivers that I can find for my laptop. I installed different versions of the IRST program, tried deleting the SSD volume, formatting it, etc. The fixes people talk about in other threads don't work for me because my programs, BIOS, etc seem to be missing options. Is RAID my problem?
Just rechecked BIOS settings for the 20th time and the only SATA configuration option is AHCI, and there are no extra options in the BIOS regarding either of the Intel IRSTs
It has an ASUS M2N-E motherboard with an old single core AMD Athlon 64 (I cannot remember which model specifically).
Last week, I provided him with a couple of old HDDs and 8GB worth PC-5300 DDR2 667 MHz RAM. We also installed Windows 8.1 64-bit, and other than the CPU being a single core and a bit slow, things were proceeding relatively smoothly.
He has an NVIDIA Geforce 8500 on the board, and he's ordered a PNY-made Geforce GTX 650 that's on it's way at present.
He's wanting to upgrade the CPU to the AMD PHENOM X4 9950, so we've been periodically meeting over the past couple of weeks to perform surgery on this old machine.
At any rate, we found that to update the CPU, we needed to update his BIOS from the one that was installed, which was at revision 0502. The needed BIOS revision for the CPU was 1504, but would also work with revision 1701.
After jumping through several hoops to update the BIOS, we updated it to 1701. However, since then the machine will not boot into Windows 8.1. He gets an instant BSOD. I did not see the error code, so I cannot say what it was. He told me that he's attempted to do a repair install to no avail. The repair attempt results in a constant loop of the machine rebooting and BSODing.
At any rate, here are some URLs that detail the board specs and the list of BIOS revisions for that board.
Motherboard Specs: Motherboards - M2N-E - ASUS CPU Compatibility list: ASUSTeK Computer Inc. -Support- CPU Support M2N-E
Alright, so my ASUS laptop has been getting a little slow lately, so I decided to reinstall. Now I know my PC has an ASUS recovery partition, which reinstall the pc with all the tools, drivers etc, since I've used it before. But now when I restart the computer and press F9 and reset, it doesn't work. This is what I do:
This is where it was supposed to give me the option to restore whole drive or just install windows to the primary partition. But now it asks for a CD, which I don't have. This PC never used to have a recovery CD, just a recovery partition.
Then, I read somewhere I could do the same from inside Windows 8, so I tried that as well by going to the charms bar, then Settings and then "Change PC settings". Then I selected "Update and recovery" from the left, and then went to Recovery, where I pressed the button to remove everything and reinstall windows. This is what I got:
So, I tried to see if EaseUs Partition manager showed the recovery partition. I started ASUS and these are the partitions it found:
I saw it found both a "Recovery" partition and a "Restore" partition. Now I assume the Recovery partition is the one Windows 8 boots into, and the Restore partition is the one created by ASUS. So, these are the contents of the Recovery partition:
And these are the contents of the Restore partition:
As you can see outlined in red, it does contain an install.wim file, so I know the recovery data is there. However the Windows 8 recovery environment just isn't able to find it.
Recently I upgraded my wife's Dell All In One from Windows 8 to 8.1 by going to Microsoft Store and selecting the upgrade panel for 8.1. It went smoothly even if slowly. I then tried doing the same thing for my Asus Q200E Laptop.
When I went to the store all I saw were apps for ASUS. How can I get to the real Microsoft Store to get the 8.1 upgrade?
I upgraded the O/S to Windows 8 Pro from Standard in order to use the WMC and now the Sleep mode doesn't behave as before. How to reset it back to the factory settings? The Windows 8 RESET function under the Control panel returns it back to a fresh copy of Windows 8 Pro and not Windows 8 Standard. I also see a recovery partition on its Hard Drive.
I am trying to upgrade from windows 8 pro to windows 8.1 on a samsung laptop. The download completes and installation starts.
After a while the following message appears "you cant install windows on a usb flash drive with setup"
I am not actually trying to install to a flash drive. I contacted Microsoft and after 5 hours they said that I should connect to the internet with a cable and not by wireless in order to solve the problem (this didn't work of course and I had told them that it was an install problem and not a download problem).
Until very recently i was running Windows 8 with a 240 GB Sandisk SSD as a primary and a 2 TB Western Digital Green HDD as a storage. I decided to set up a RAID 1 setup so i purchased a second 2 TB HDD and installed it.
My intent was to run windows 8 off the 240 SSD as a primary and have a RAID 1 setup for my 2TB HDDs.
I learnt that my data configuration was set to AHCI. I decided to do a complete clean install and change the sata configuration in BIOS to RAID.
After successfully creating a RAID volume using my 2TB HDDs i proceeded to install Windows off my primary. I am however having difficulties in that it will not allow me to install windows on either drive.
I have an asus s500ca ultrabook it has a 24gb ssd which is being used as a cache drive and a 500gb HDD which has windows installed on it. If I wipe out the 500gb hdd and re-install windows 8.1 on it and leave the 24gb drive alone will it still act like a cache drive?
I have done a re-install of Windows 8 due to stabilty and speed issues.
It is a DUAL boot with Ubuntu 13.04, but this is not the problem.
The DESKTOP (I use Classic Shell) to get to the Desktop not the START screen. This worked well with my previous install.
However, I can't put ANYTHING on the blank Desktop - the folder Desktop has TONS of stuff in it.
Checked Permissions. Tried to Create a new folder or shortcut - it SAYS it's OK, and puts the New Folder in the Desktop folder, but it does NOT appear on my Desktop.
The Background works and I can get the Next Background by right clicking and selectin Next Desktop Background.
The START screen Icon of Desktop is also blank, except for my Background.
I have never dabbled in the installation or reinstallation of Windows 8 so far, but I am looking for information on how to re-install windows 8 onto a desktop computer that does not come with restore discs.
Now is it true that the CD-Key is stored on the BIOS? Or was that just a rumor that was floating around, I have never had true clarification on that.
If the answer is no, where would I find the CD-Key at that point?
Basically it is for a desktop computer that is no longer functioning and there were no restore discs created during original operation of the computer.
Original ACER desktop with Windows 8 and it was upgraded through the Windows Store to Windows 8.1 The upgrade came up with errors "the Secure Boot watermark".
I tried various things suggested to fix the error but was unable to.
I backed up the computer data.
I formatted the drive and installed Windows 8.1 from a thumb drive and it installed correctly without errors.
I was unable to install a Product Key Licence as the computer had it imbedded in the bios and I have no label with the key on the machine.
I should not have to purchase another licence. How do I find the original licence key?
My laptop originally had Windows 8 installed on it on an SSD and an HDD. I have since wiped the drive clean. But now, I need to get Windows 8 back for work. How can I replicate the original layout with Windows 8 being put on both a SSD and a HDD. The nature of my work involves a lot of CAD software usage for projects as well as research and the like. As such, I would like for such software to be located on my SSD for faster speeds.
Tried numerous times to install the update but keeps hanging when at "Applying PC Settings". It usually stops at around 84%, eventually the screen will go black only showing the cursor then finally it shows the bsod. The bsod says: driver power state failure.
I have Windows 7 64 bit Ultimate installed and activated. I am trying to upgrade to Windows 8 and the upgrade assistant tells me it needs at least 2gb when I have 8gb and Windows 7 sees and knows I have 8gb
I am thinking it could be my bios, but it's already at the latest version
Here are some photos from my bios, so you can tell me if there is anything I need to enable.
These are photos from my bios. I need to change to get this to work.
