Earlier today, I decided to do a fresh install from my retail CD of Windows 8. Windows 8 was my existing OS. (I just wanted to start fresh). For some reason, it did not create the usual two additional small partitions (system reserved and one called recovery). Everything seemed to work alright, but was wondering why this happened (only the C: partition was created).
View 2 RepliesMy roommate did a thorough wipe of his c drive, then installed 7 then 8.1.1. for some reason he cannot boot in to the win 7 partition. after building up and getting 8.1.1 setup just the way he wants it he doesn't care about the 7 partition any more. i know i can go in delete the 7 partition, stretch 8.1.1 to fill the entire drive, but what i'm not sure of is if the boot info is on 7 or 8.1.1. i do know that once 8.1.1 is the only os i can go into msconfig and delete the win 7 entry. note since both partitions were created using partition wizard there is not 100mb reserved partition, so the boot information is either on 7 or 8.1.1. i also have a copy of Acronis True Image 2014 Premium.
View 4 Replies View RelatedI am trying to do a clean install of windows 8 on my laptop (Elitebook 8770W) from a USB stick with original MS Windows OEM iso. Once I boot from usb stick, at the setup screen I enter the product key and then choose advanced to do a clean install. I then choose my hard disk partition to install windows but I get stuck here with this error:
"Windows cannot be installed to disk 0 partition 1"
I deleted the partition and choose to install on the unallocated space (150GIG) But still get the same error and when I click on the error this is what I get:
"Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's Bios"
In bios I have my disk set as Raid and I also have a m-sata Flash cache. If I change raid to AHCI I will be able then to install windows. But if I turn it back to raid after install I will no longer be able to boot I have to be in raid mode to use my m-sat as cache drive.
So here I am stuck not being able to install windows I even downloaded latest intel rapid storage technology drivers and put them on the usb stick with windows setup files. When i got the error I choose to load driver. But even after that I was getting same error and windows would not install on my HDD.
What's the right way to install in this condition (raid)?
I have win 8 pro installed & two HDDs with two partions each , I want to migrate the boot partition to another partition on the second drive .
It would have been easier if i would have just cloned the complete drives but one of the partions on the 2nd drive has data which cannot be deleted .
So I have Drive
1 - Partitions C: ( boot partition ) & D:
Drive 2 - Partitions E: & F:
I want to remove Drive 1 from my PC so i want to copy C: to E: then remove drive 1 & boot from E:
I tried "Easeus todo backup" , did not work, it does not make the copy bootable , to make it bootale the whole drive has to be copied .
I tried making an image of C: using Windows 8 inbuilt backup feature then removed drive 1 , installed Windows 8 on E: then tried restoring the image of C: but i got some error.
My friend's sister installed Windows 8 twice, and it installed successfully both times. When I start the Netbook it gives me an option to choose between one of the two installs. I'd like to delete one of the installations but I'm not sure how to do so.
View 4 Replies View RelatedI was trying to install windows 8.1 on my new SSD for my laptop. However during the installation process, I accidentally unplugged the USB drive that had the Windows 8.1 install on it and the process was interrupted.
Now whenever I plug in that SSD into my laptop it gets stuck in this "boot loop" kind of deal where I hear it start up and turn off all in a matter of 10 seconds or so and all I get is a black screen.
Without the second hard drive my laptop runs almost flawlessly. Only issue is upon booting up it asks which operating system to use and gives me two options: Boot from Windows 8.1 or Boot from Windows 8.1 volume 4.
my laptop came with a pre installed windows 8 having gpt format but i downgraded to windows 7 and reformatted it to ntfs,.. now I want to go back to windows 8 and format the drive to gpt again, but the external hard drive that contains the backup image was corrupted. What should I do?
View 6 Replies View RelatedI am gonna buy a laptop that comes with windows 8. I want to replace that HDD with an SSD . So how do I go about this.
View 9 Replies View RelatedI bought a Razer Blade 14" laptop last week and it comes pre-installed with windows 8.1 core
Im looking for a way to download the windows 8.1 core x64 iso so that i can format the laptop and reset the partitions of the ssd (14GB is allocated to the system restore)
after much googling i saw that people have been getting an iso through using their windows 8 key, but mine is straight up 8.1 so after trying the method it did not work.
I want to know if it's possible to create a clean install DVD.
with pre-installed Windows 8without product key (when I buyed the notebook Windows 8 was already installed - the personal product key is "inside" the notebook).
By the way, can I include the Windows Updates in the install DVD somehow - (and programs which should be pre-installed)?
And if so, will it perform slower? Or only boot time will be affected? Any other disadvantage of doing so?
View 9 Replies View RelatedSetting up a dual boot with Win 7x64 on a 120GB SSD. The partition for Win 8 has 48 GB, but the install is failing: "Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks." The first time I tried with the partition formatted, the second with it unallocated, both getting the same result. What am I missing?
View 9 Replies View RelatedBought new pc with windows 8.0 installed. Can't download windows 8.1 from store
View 6 Replies View RelatedI have an old desktop running windows 7 (spec below). I had a 60GB partition and figured I'd install 8.1. I downloaded 8.1, proceeded to the install and everything went fine.
Upon reboot the desktop loaded to the windows 8 icon and immediately rebooted itself, and then launched into windows 8 automatic repair (without showing OS choice beforehand).
The pc has been stuck in this loop and I cant get out of it. I've attempted to reinstall a few times but it's the same story. I ran a disk check but no problems were found.
Windows 7 runs fine and has done for years, just a little sluggish as it needs some cleaning.
Spec:
Mobo: nForce M-a
CPU: Athlon X2 3800+
GPU: GeForce 8500 GT
2GB ram
I installed Windows 8 with UEFI on a GPT SSD like the tutorial on this very forum states, but I ran into an issue when I plugged in my secondary HDD (1tb MBR?). It won't boot even if I make sure Windows Boot Manager is the primary boot option. What can I do about this?
If I unplug the drive, it boots fine. If I plug it back in, it stops and Windows tries to repair itself.
Apparently if you're using Win 8 with UEFI, you can't have a 2nd drive that uses extended or logical partition. Since I had Ubuntu on the 2nd drive (logical) it wouldn't boot. I haven't done it yet, but If I delete the partition it should work just fine. I created a bootable usb with Gparted and will fix it later.
I am trying to set up my windows 7 laptop so that it duel boots between 7 and 8 which sounds great. My existing W7 partition has been shrunk and a new partition has been created ready for the install however when trying to install using the disk, I keep being told that windows cant be installed onto the partition due to the disk being a MBR format (think that what the three letters are) .
Is there a way round this without having to remove the current install and remove all of my content.
I am using Windows 8.1. I have an Acer Aspire V5-571P computer with Windows 8.1 pre-installed. I want to install my licensed copy of Windows 7 Professional on it as a dual boot to dual boot Windows 7 and Windows 8.1. I have seen that it can be done, but I cannot figure out how to correctly do it. I have already had to re-install Windows 8.1 once from a USB Recovery drive which was not fun. So how to do it and get it done. I love windows 7 Pro but I can't figure out how to do it.
I have already turned off secure boot in bios. However, UEFI mode is still active vs legacy bios which is the other mode I have.
At work i have Windows 8 Pro installed from an MSDN ISO, having been waiting for the 8.1 update today i have now just seen a quote on Microsoft's site saying "If you installed Windows 8 using an MSDN ISO, you might be able to install Windows 8.1 using a similar ISO from MSDN"
Is there an easy upgrade option for this type of Windows 8 install? Preferably, without losing any data.
Windows 7 was having feature in which if we want to install any software it can be installed as older version modes XP,2000 etc.). Is there something similar in 8.1?
View 5 Replies View RelatedI was upgrading to Win 8.1 pro with WMC, but when the download was just 5% completed, the net got disconnected due to power cut. When I restarted the system and Click on the Upgrade Tile in the Store, it goes to Download Page. And when I click on the Download button, it says Application is installed. I can't find it in My apps either so that I can click on uninstall and do a fresh upgrade. The download was only 5% completed. Now I am unable to upgrade.
PS: I googled somewhere and found that I had to empty the SoftwareDistribution folder is to be emptied. After doing that, now when I try to upgrade I get "Your Windows 8.1 installation could not be completed, something went wrong and the windows installation could not complete".
Because it does not contain enough free space. Clearly I have enough free space... [URL] ....
What should I do? I want to do a dual boot, so I can keep Windows 7 in case I don't like 8.1...
I formatted and deleted that partition and I tried again with 201gb, and no luck. [URL] ....
I'm trying to recreate win 8.1 pro system reserved partition on my ssd. Initially I installed windows on my ssd (c: ) and windows created the sysres partition on my unformatted hd (without telling me anything). After some trouble I managed to be able to boot from ssd directly without going through the sysres partition on the hd. Now if possible I'd like to recreate the sysres on the ssd (by disconnecting my hd so that windows has no other options than creating this on the ssd). If a try a system refresh it tells me it would wipe away all my user installed apps.
View 4 Replies View RelatedIs it possible not to have the partition "recovery"?
Because if you look at the two tutorials:
- UEFI (Unified Extensible Firmware Interface) - Install Windows 7 with - Windows 7 Forums
- UEFI (Unified Extensible Firmware Interface) - Install Windows 8 with
In the tutorial to install Windows 7 in UEFI, there is not that damn partition recovery, while in the tutorial for Windows 8, we can see it.
When I install Windows 7 (MBR mode), I avoid this partition "recovery" by creating a partition with a name before installation. I install the OS on it and everything is fine, no partition "recovery" But here, since one must delete all partitions, If I create a GPT disk with a partitioning tool before installing, is that it might be appropriate?
My disk situation is as in the attached screenshot. I have two Windows 8 installed on 2 different partitions of the same SSD. Now I would like to remove the first installation, Windows 8 (H: )
The problem is that the Windows 8 (H: ) partition is marked as System, Active so from reading the forum I know there may be some problems with bootmgr... but I can't understand exactly what to do.
I had a Windows 7 laptop until I decided to upgrade it to Windows 8. What I did was create a partition on the Windows 7 side and went through setting up the dual boot process with no problems. Now, after using Windows 8, I would like to expand the partition size on the Windows 8 side since I only created about 30GB and Windows 8 will become my primary. So, what I was wanting to know is how easy or difficult is it to resize he partition without corrupting the OS.The closest I found was from this link Dual Boot Windows 7 and Windows 8 - Delete Windows 7 which discusses how to delete the old Windows 7 partition. Would this work on reducing the Windows 7 partition as well? I am thinking it should? I have backed up both partitions using True Image and there really isn't any valuable data on the laptops, so not concerned about losing anything.
View 1 Replies View RelatedI want install another copy of windows 8 on another partition. This is useful in installing different group of programs so I boot the suitable one related to specific problems. Moreover you can delete a problem file from the other partition.
View 4 Replies View RelatedI get this error: when I try to clean install to a gpt format hdd. Haven't found setup txt yet.
This will be Windows 8 Pro on an HP Pavilion G7-2243us, 500 gb hitachi hdd, and 4 gb memory.
I partitioned a 1 Tb drive with windows 8 on first partition. Trying to install windows 7 on 2nd partition. Will boot from DVD & load files but when windows tries to open it stops & must restart computer to get out of freeze. Computer is Gateway DX4860-UR28.
View 4 Replies View RelatedThe os that i have in my laptop is windows 8. Any time I put on the computer a message pop up that new update of 8.1 is available. Really I want to update to 8.1 but i don't want to loss my files and other programs installed. will it be possible to update it without losing my all ready installed programs?
View 1 Replies View RelatedOk so i am trying to install windows 8 X64 onto a different hard drive as windows 7 so i can switch between the two at startup.Ok so my problems started yesterday when trying to install windows 8 onto the Hard Drive i was getting"Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks."To fix this i converted the disk to a GPT disk in Disk ManagerNow im getting the Error "Setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more Information." Here is a screenshot of disk manager at the moment.I am trying to install Windows 8 to Disk 2.
View 9 Replies View RelatedI have some problems with my laptop ASUS K55VD. I had windows 8, but with the store of windows I have updated to windows 8.1.
I have tried to use the recovery partition, but every time I try appears a message. Failed to reset your computer. A partition of unity necessary is missing.
For that reason I have looking for some information, and with CMD commands like "diskpart". I have noticed that I have 8 volumen.
And in Computer Management appears this.
Then googling recommend to use EaseUS Partition, and some many things change. In the beginning, I had the same 3 partions in red and I don't know what happened.
But in diskpart change too, and I only have 4 volume, and it have dissapeared the recovery partition, and I don't know why?
Before to use EaseUS partition I have created a USB booteable with 9.79gb, and I had this:
But, in this days I have tried to create the USB booteable again, but I can't. And everytime I have tried to run the usb, appears to select the language, the keyboard, and then appears the same windows with troubleshoting and turn off (it returns at the previous windows in blue)