My friend's sister installed Windows 8 twice, and it installed successfully both times. When I start the Netbook it gives me an option to choose between one of the two installs. I'd like to delete one of the installations but I'm not sure how to do so.
View 4 Replies
Upgrading Netbook, with an SSD, so naturally I made sure I let him know beforehand that an SSD was not going to perform as advertised on his Netbook given that it only has a SATA 2 (3Gb/s) interface and a pretty low end Intel Atom based CPU.
The SSD is a Crucial MX100 128GB.
So... Is there a software I need to be running in order to get the most out of Crucial SSD's?, I'm running a Plextor SSD on my main gaming rig and it runs absolutely beastly without any software, etc.
I made sure I changed the SATA Mode to ACHI before installing Windows 8.1.
Also, I did not install any Intel Chipset drivers or anything on the Netbook given how old it is, Windows should have the latest drivers for it (I did run Windows Update).
I was trying to install windows 8.1 on my new SSD for my laptop. However during the installation process, I accidentally unplugged the USB drive that had the Windows 8.1 install on it and the process was interrupted.
Now whenever I plug in that SSD into my laptop it gets stuck in this "boot loop" kind of deal where I hear it start up and turn off all in a matter of 10 seconds or so and all I get is a black screen.
Without the second hard drive my laptop runs almost flawlessly. Only issue is upon booting up it asks which operating system to use and gives me two options: Boot from Windows 8.1 or Boot from Windows 8.1 volume 4.
Earlier today, I decided to do a fresh install from my retail CD of Windows 8. Windows 8 was my existing OS. (I just wanted to start fresh). For some reason, it did not create the usual two additional small partitions (system reserved and one called recovery). Everything seemed to work alright, but was wondering why this happened (only the C: partition was created).
View 2 Replies View Relatedmy laptop came with a pre installed windows 8 having gpt format but i downgraded to windows 7 and reformatted it to ntfs,.. now I want to go back to windows 8 and format the drive to gpt again, but the external hard drive that contains the backup image was corrupted. What should I do?
View 6 Replies View RelatedI am gonna buy a laptop that comes with windows 8. I want to replace that HDD with an SSD . So how do I go about this.
View 9 Replies View RelatedI bought a Razer Blade 14" laptop last week and it comes pre-installed with windows 8.1 core
Im looking for a way to download the windows 8.1 core x64 iso so that i can format the laptop and reset the partitions of the ssd (14GB is allocated to the system restore)
after much googling i saw that people have been getting an iso through using their windows 8 key, but mine is straight up 8.1 so after trying the method it did not work.
Attempted to install my 2002 XP Standard for Students and Teachers on my new Netbook. (It's an Office program.) I had already installed it on my Vista Desktop and my laptop Win 7 with no issues at all.
When I try to install it on my Netbook, I continue to get an error message about the - Err 25003Installation Source has been corrupted.
I've googled this error and there are plenty. But nothing works and I can NOT get this program installed.
I want to know if it's possible to create a clean install DVD.
with pre-installed Windows 8without product key (when I buyed the notebook Windows 8 was already installed - the personal product key is "inside" the notebook).
By the way, can I include the Windows Updates in the install DVD somehow - (and programs which should be pre-installed)?
My roommate did a thorough wipe of his c drive, then installed 7 then 8.1.1. for some reason he cannot boot in to the win 7 partition. after building up and getting 8.1.1 setup just the way he wants it he doesn't care about the 7 partition any more. i know i can go in delete the 7 partition, stretch 8.1.1 to fill the entire drive, but what i'm not sure of is if the boot info is on 7 or 8.1.1. i do know that once 8.1.1 is the only os i can go into msconfig and delete the win 7 entry. note since both partitions were created using partition wizard there is not 100mb reserved partition, so the boot information is either on 7 or 8.1.1. i also have a copy of Acronis True Image 2014 Premium.
View 4 Replies View RelatedAnd if so, will it perform slower? Or only boot time will be affected? Any other disadvantage of doing so?
View 9 Replies View RelatedSetting up a dual boot with Win 7x64 on a 120GB SSD. The partition for Win 8 has 48 GB, but the install is failing: "Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks." The first time I tried with the partition formatted, the second with it unallocated, both getting the same result. What am I missing?
View 9 Replies View RelatedBought new pc with windows 8.0 installed. Can't download windows 8.1 from store
View 6 Replies View RelatedI am trying to do a clean install of windows 8 on my laptop (Elitebook 8770W) from a USB stick with original MS Windows OEM iso. Once I boot from usb stick, at the setup screen I enter the product key and then choose advanced to do a clean install. I then choose my hard disk partition to install windows but I get stuck here with this error:
"Windows cannot be installed to disk 0 partition 1"
I deleted the partition and choose to install on the unallocated space (150GIG) But still get the same error and when I click on the error this is what I get:
"Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's Bios"
In bios I have my disk set as Raid and I also have a m-sata Flash cache. If I change raid to AHCI I will be able then to install windows. But if I turn it back to raid after install I will no longer be able to boot I have to be in raid mode to use my m-sat as cache drive.
So here I am stuck not being able to install windows I even downloaded latest intel rapid storage technology drivers and put them on the usb stick with windows setup files. When i got the error I choose to load driver. But even after that I was getting same error and windows would not install on my HDD.
What's the right way to install in this condition (raid)?
I have an old desktop running windows 7 (spec below). I had a 60GB partition and figured I'd install 8.1. I downloaded 8.1, proceeded to the install and everything went fine.
Upon reboot the desktop loaded to the windows 8 icon and immediately rebooted itself, and then launched into windows 8 automatic repair (without showing OS choice beforehand).
The pc has been stuck in this loop and I cant get out of it. I've attempted to reinstall a few times but it's the same story. I ran a disk check but no problems were found.
Windows 7 runs fine and has done for years, just a little sluggish as it needs some cleaning.
Spec:
Mobo: nForce M-a
CPU: Athlon X2 3800+
GPU: GeForce 8500 GT
2GB ram
I installed Windows 8 with UEFI on a GPT SSD like the tutorial on this very forum states, but I ran into an issue when I plugged in my secondary HDD (1tb MBR?). It won't boot even if I make sure Windows Boot Manager is the primary boot option. What can I do about this?
If I unplug the drive, it boots fine. If I plug it back in, it stops and Windows tries to repair itself.
Apparently if you're using Win 8 with UEFI, you can't have a 2nd drive that uses extended or logical partition. Since I had Ubuntu on the 2nd drive (logical) it wouldn't boot. I haven't done it yet, but If I delete the partition it should work just fine. I created a bootable usb with Gparted and will fix it later.
I am trying to set up my windows 7 laptop so that it duel boots between 7 and 8 which sounds great. My existing W7 partition has been shrunk and a new partition has been created ready for the install however when trying to install using the disk, I keep being told that windows cant be installed onto the partition due to the disk being a MBR format (think that what the three letters are) .
Is there a way round this without having to remove the current install and remove all of my content.
I am using Windows 8.1. I have an Acer Aspire V5-571P computer with Windows 8.1 pre-installed. I want to install my licensed copy of Windows 7 Professional on it as a dual boot to dual boot Windows 7 and Windows 8.1. I have seen that it can be done, but I cannot figure out how to correctly do it. I have already had to re-install Windows 8.1 once from a USB Recovery drive which was not fun. So how to do it and get it done. I love windows 7 Pro but I can't figure out how to do it.
I have already turned off secure boot in bios. However, UEFI mode is still active vs legacy bios which is the other mode I have.
At work i have Windows 8 Pro installed from an MSDN ISO, having been waiting for the 8.1 update today i have now just seen a quote on Microsoft's site saying "If you installed Windows 8 using an MSDN ISO, you might be able to install Windows 8.1 using a similar ISO from MSDN"
Is there an easy upgrade option for this type of Windows 8 install? Preferably, without losing any data.
Windows 7 was having feature in which if we want to install any software it can be installed as older version modes XP,2000 etc.). Is there something similar in 8.1?
View 5 Replies View RelatedI was upgrading to Win 8.1 pro with WMC, but when the download was just 5% completed, the net got disconnected due to power cut. When I restarted the system and Click on the Upgrade Tile in the Store, it goes to Download Page. And when I click on the Download button, it says Application is installed. I can't find it in My apps either so that I can click on uninstall and do a fresh upgrade. The download was only 5% completed. Now I am unable to upgrade.
PS: I googled somewhere and found that I had to empty the SoftwareDistribution folder is to be emptied. After doing that, now when I try to upgrade I get "Your Windows 8.1 installation could not be completed, something went wrong and the windows installation could not complete".
The os that i have in my laptop is windows 8. Any time I put on the computer a message pop up that new update of 8.1 is available. Really I want to update to 8.1 but i don't want to loss my files and other programs installed. will it be possible to update it without losing my all ready installed programs?
View 1 Replies View RelatedHow to hid all the partitions in the factory installed HDD for Lenovo Y580.
This is the scenario.
Firstly, i successfully migrated all of the following partitions:
OEM/Hidden partition,
C partition: boot drive/ program files and data drive &
D partition: containing drivers
from my Lenovo factory installed HDD to the SSD and to use the SSD as the primary boot drive . Now, i plan to use the factory installed HDD as my data drive. (I am using a caddy tray for this whereby i plan to swap out the optical drive and pluck in the Lenovo factory installed HDD). However, for "safety reasons" i do not plan to re-format the entire factory installed HDD but rather to keep those partitions just in case if my SSD fails.
Hence, how do i turn all the three partitions above (in the Lenovo factory installed HDD) to become dormant? I want the computer to boot up from the existing SSD but then to treat the factory installed HDD as the data drive and not to read from any of the three partitions in the factory installed HDD.
I am planning to use EASUS as my disk partition freeware.
I want to upgrade windows 7 Pro system to windows 8.1 pro without loosing data or installed software settings.
is there a easy/legal way to this???
I have a few questions about dual booting windows 7 and windows 8 preinstalled (UEFI) on my Dell laptop.
1. Can I install a non-UEFI version of Windows 7 on my laptop, if so how?
2. Will installing a non-UEFI version of Windows 7 on my laptop break it?
3. Can I use EasyBCD for UEFI?
4. How do I create a UEFI windows 7?
In a few days I will receive a Lenovo Thinkpad X1 Carbon with Windows 8 installed. And separately I will receive an OEM Win7. Win7 is certainly what I intend to use, and I had originally thought I would wipe out Windows 8 and install Win7. But now I am wondering if I can somehow preserve Windows 8 for occasional use. (I would have ordered the machine with Win7 but this is a refurbished machine.)
I would rather not have to understand UEFI. (I'm sure it would be interesting, I just have other things to do with my time.) And, although I do it sometimes, and will if I have to, I do not like diddling with BIOS settings.
I know that factory installed operating systems generally can't be moved to other machines. And I fear that the factory installed Windows 8 that I will receive may not even tolerate being installed, e.g., in a smaller partition or under something like VMware (another complication I'd like to avoid).
My girlfriend has recently got a new laptop and unfortunately she doesn't like it, despite me loving Windows 8.1.
She would like to try Windows 8 but is going back to Uni soon so would like Windows 7 as a back-up dual booted.
I've shrunk the partition and created a simple partition for Windows 7 but really unsure about Installing Windows 7 on a Windows 8 Laptop, it's an ASUS X550CA-XX417H. I've checked power shell with SecureBootUEFI and result is True.
What would be the best way to dual boot?
I got two laptops today, one with Windows 7 and the other with Windows 8, both 64-bit machines.
I don't have a windows 8 dvd around and I don't have the internet to download a windows 8 .iso image.
All I have is a USB stick. I'm not sure how creating a system image works but from the last article I read, both computers must have equal disk size or larger and the destination disk of the laptop for the process is a tad smaller than the source partition.
I had installed windows 7 in other drive that was empty after installion I noticed my windows 8 that I installed earlier got moved from c local drive to other drive and my windows 8 files are there but I can boot into it even in system configuration only windows 7 os can be seen and even on boot it is not showing ..
View 8 Replies View Relatedit installs without a hitch, comes up, runs fine ... just don't try running any Metro apps because most of them won't work - the screen resolution I have is something like 1024 x 600 (fine for this device) but that's too small for most apps. The desktop is fine but virtually nothing else can be run outside that.
I like my little netbook but Windows 8 doesn't. I made an image of that drive becuase I'll be restoring that soon.
I installed Windows 8 on my little aspire one netbook.. it runs amazing.. only problem is the metro apps will not open... and the reason is the screen resolution.. is there any way around this? If not is there a way to roll back to my old windows xp?
View 3 Replies View Related
