Setup Installation :: Create Windows 8 ISO Image From Pre-installed Windows
Sep 15, 2014
I got two laptops today, one with Windows 7 and the other with Windows 8, both 64-bit machines.
I don't have a windows 8 dvd around and I don't have the internet to download a windows 8 .iso image.
All I have is a USB stick. I'm not sure how creating a system image works but from the last article I read, both computers must have equal disk size or larger and the destination disk of the laptop for the process is a tad smaller than the source partition.
My friend's sister installed Windows 8 twice, and it installed successfully both times. When I start the Netbook it gives me an option to choose between one of the two installs. I'd like to delete one of the installations but I'm not sure how to do so.
I was trying to install windows 8.1 on my new SSD for my laptop. However during the installation process, I accidentally unplugged the USB drive that had the Windows 8.1 install on it and the process was interrupted.
Now whenever I plug in that SSD into my laptop it gets stuck in this "boot loop" kind of deal where I hear it start up and turn off all in a matter of 10 seconds or so and all I get is a black screen.
Without the second hard drive my laptop runs almost flawlessly. Only issue is upon booting up it asks which operating system to use and gives me two options: Boot from Windows 8.1 or Boot from Windows 8.1 volume 4.
Earlier today, I decided to do a fresh install from my retail CD of Windows 8. Windows 8 was my existing OS. (I just wanted to start fresh). For some reason, it did not create the usual two additional small partitions (system reserved and one called recovery). Everything seemed to work alright, but was wondering why this happened (only the C: partition was created).
my laptop came with a pre installed windows 8 having gpt format but i downgraded to windows 7 and reformatted it to ntfs,.. now I want to go back to windows 8 and format the drive to gpt again, but the external hard drive that contains the backup image was corrupted. What should I do?
I bought a Razer Blade 14" laptop last week and it comes pre-installed with windows 8.1 core
Im looking for a way to download the windows 8.1 core x64 iso so that i can format the laptop and reset the partitions of the ssd (14GB is allocated to the system restore)
after much googling i saw that people have been getting an iso through using their windows 8 key, but mine is straight up 8.1 so after trying the method it did not work.
I want to know if it's possible to create a clean install DVD.
with pre-installed Windows 8without product key (when I buyed the notebook Windows 8 was already installed - the personal product key is "inside" the notebook).
By the way, can I include the Windows Updates in the install DVD somehow - (and programs which should be pre-installed)?
My roommate did a thorough wipe of his c drive, then installed 7 then 8.1.1. for some reason he cannot boot in to the win 7 partition. after building up and getting 8.1.1 setup just the way he wants it he doesn't care about the 7 partition any more. i know i can go in delete the 7 partition, stretch 8.1.1 to fill the entire drive, but what i'm not sure of is if the boot info is on 7 or 8.1.1. i do know that once 8.1.1 is the only os i can go into msconfig and delete the win 7 entry. note since both partitions were created using partition wizard there is not 100mb reserved partition, so the boot information is either on 7 or 8.1.1. i also have a copy of Acronis True Image 2014 Premium.
Setting up a dual boot with Win 7x64 on a 120GB SSD. The partition for Win 8 has 48 GB, but the install is failing: "Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks." The first time I tried with the partition formatted, the second with it unallocated, both getting the same result. What am I missing?
I am trying to do a clean install of windows 8 on my laptop (Elitebook 8770W) from a USB stick with original MS Windows OEM iso. Once I boot from usb stick, at the setup screen I enter the product key and then choose advanced to do a clean install. I then choose my hard disk partition to install windows but I get stuck here with this error:
"Windows cannot be installed to disk 0 partition 1"
I deleted the partition and choose to install on the unallocated space (150GIG) But still get the same error and when I click on the error this is what I get:
"Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's Bios"
In bios I have my disk set as Raid and I also have a m-sata Flash cache. If I change raid to AHCI I will be able then to install windows. But if I turn it back to raid after install I will no longer be able to boot I have to be in raid mode to use my m-sat as cache drive.
So here I am stuck not being able to install windows I even downloaded latest intel rapid storage technology drivers and put them on the usb stick with windows setup files. When i got the error I choose to load driver. But even after that I was getting same error and windows would not install on my HDD.
What's the right way to install in this condition (raid)?
I have a Windows 8 pro oem copy and I want to create a bootable Windows 8.1 pro Usb stick in uefi format to do a clean install.
Now I built my machine myself so I am sure there is no embedded windows key in the bios? But I cant seem to download anything that will create the media, it says it my key wont work in a retail copy of windows 8.
I have an old desktop running windows 7 (spec below). I had a 60GB partition and figured I'd install 8.1. I downloaded 8.1, proceeded to the install and everything went fine.
Upon reboot the desktop loaded to the windows 8 icon and immediately rebooted itself, and then launched into windows 8 automatic repair (without showing OS choice beforehand).
The pc has been stuck in this loop and I cant get out of it. I've attempted to reinstall a few times but it's the same story. I ran a disk check but no problems were found.
Windows 7 runs fine and has done for years, just a little sluggish as it needs some cleaning.
I installed Windows 8 with UEFI on a GPT SSD like the tutorial on this very forum states, but I ran into an issue when I plugged in my secondary HDD (1tb MBR?). It won't boot even if I make sure Windows Boot Manager is the primary boot option. What can I do about this?
If I unplug the drive, it boots fine. If I plug it back in, it stops and Windows tries to repair itself.
Apparently if you're using Win 8 with UEFI, you can't have a 2nd drive that uses extended or logical partition. Since I had Ubuntu on the 2nd drive (logical) it wouldn't boot. I haven't done it yet, but If I delete the partition it should work just fine. I created a bootable usb with Gparted and will fix it later.
I am trying to set up my windows 7 laptop so that it duel boots between 7 and 8 which sounds great. My existing W7 partition has been shrunk and a new partition has been created ready for the install however when trying to install using the disk, I keep being told that windows cant be installed onto the partition due to the disk being a MBR format (think that what the three letters are) .
Is there a way round this without having to remove the current install and remove all of my content.
I don't know what Windows 8.1 has done to my system but after getting rid of it and re-installing Windows 8 ENTERPRISE again I cannot create Windows to GO any more
It doesn't matter if I plug in an SSD, a standard USB stick or a standard external USB HDD - I get No suitable devices found when launching the application from the control panel.
(I can do it manually the old fashioned way but I don't know why the standard method is broken when it was working perfectly before).
I am using Windows 8.1. I have an Acer Aspire V5-571P computer with Windows 8.1 pre-installed. I want to install my licensed copy of Windows 7 Professional on it as a dual boot to dual boot Windows 7 and Windows 8.1. I have seen that it can be done, but I cannot figure out how to correctly do it. I have already had to re-install Windows 8.1 once from a USB Recovery drive which was not fun. So how to do it and get it done. I love windows 7 Pro but I can't figure out how to do it.
I have already turned off secure boot in bios. However, UEFI mode is still active vs legacy bios which is the other mode I have.
So I'm creating a Windows 8 image with custom software installed, but now i'm stuck on the next steps, I've captured the image but the below link send me in a bit of confusion on the next steps! With win 7 in the past I used to be able to just capture the image and replace the original boot.wim file. Windows 8 doesn't seem to want to let me me do that. it will boot to install but a licence key field appears and doesn't like any licence I use (VLK by the way) What steps should I try and follow next?
Ok so i am trying to install windows 8 X64 onto a different hard drive as windows 7 so i can switch between the two at startup.Ok so my problems started yesterday when trying to install windows 8 onto the Hard Drive i was getting"Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks."To fix this i converted the disk to a GPT disk in Disk ManagerNow im getting the Error "Setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more Information." Here is a screenshot of disk manager at the moment.I am trying to install Windows 8 to Disk 2.
I'm trying to get my existing installation of windows to boot as an external hard drive. I had it installed on an internal drive, then removed the hard drive and put it in an external enclosure. Then trying to boot off the drive results in windows loading the recovery screen and giving me a bunch of options. The only thing I can do is restart the computer with all the other options (refresh, reinstall) saying that the drive is locked. Putting the drive back into the computer will allow me to boot normally from it, but I want to be able to boot from it via USB 3.
What can I do to either create a fresh install of windows on this drive that can be booted by usb or migrate/modify my existing installation to work.
I set up Windows 8 Consumer the way I like it -- had to create a custom inf for the screen of my Dell Mini 10 among other things.
I then created a system image on another computer on my network.
Next I wiped and reformatted the disk in the Mini.
But now, when I try to restore from the system image on the network, Windows 8 can't see or recognize the backup. I can browse to the location on my network perfectly well, but no matter what folder I browse to, from the drive letter of the backup drive to the folder named "Backup 2012-03-14 015251," I keep getting a message that there is no image there.
I have been doing so research lately into system imaging and deploying said image across multiple devices.
I want to image Surface Pro 3s (about 40 of them) with several dozen apps from the app store. My understanding is that if I want to use an image across multiple devices I have to use sysprep to generalize the image. The problem is any app off the app store is account specific and cannot be generalize. If you try to sysprep with apps installed you will get a Fetal Error, and you cant install apps from the store while in audit mode either.
Are there any options available to me, or will this have to be done manually?
I installed Windows on my friends MacBook Air using Bootcamp a few months ago. At that time I made a Windows Image to an external hard drive, not really sure if it was even feasible to restore it. How to do a restore in a situation like this, or if it is possible?
Brand new laptop. HP. 17e UEFI +GPT etc. Upgraded to 8.1 from 8, first thing. Then clicked on the MS, create recovery. (in blind hope of a clean 8.1 restore). Inserted (32gb stick) (later found out is illegal windows 8 version, that is not removable.) SD-extreme, 32gb. list on toms HW, as winner of all, (and is useless for this app).
So I pull out my very old SD cruiser glide, 32gb (old , slow and not win 8 cert (a good thing). Yes all 32gb extremes are mapped as HDD not removable media and is doomed. (known on all forums) but same error.
The cruiser shows up i device manager under removable media....btw i want to find out why the missing files error. I have a HDD and SSD, with latter mirrored. both the orig, HDD fails and SSD fails. same way. I parked the HDD , and run only SSD. but both fail... (my guess is , upgrades 8.0 to windows 8.1 is cause).
now the screen, attached
How can i find the log of these errors, it's not in event viewer.. oddly. sfc/ scannow works. as does chkdsk, and restore (create) works,. and system is Fast a lightning. All HP apps works, cept there version of create disk for same reasons.
My HP create recovery now works on the GLIDE. (old very old 32gb stick i had laying about). So now I am thinking HP? blocks the MS create so you will use theirs? But I'd lilke to know this, what files are missing....
I have two laptops, both Samsung, one mine and one my sisters. My one is Windows 8 and her one is a slightly older model so Windows 7. Now both are are very similar in spec, being 4GB and Intel Pentium 2.3GHz models. She recently asked me if i could sort out her laptop with Windows 8, so I said yep should be no problem.
I went and bought a Windows 8 Pro 64bit and was at first going to just do a plain install. But then had a bright idea and thought why not do an image of mine and recover it to hers, and then when started up just enter the key of the new one. that way she gets a full original Samsung install along with all the apps and everything.
At first I tried the samsung built in Recovery software but had no luck as it was just a complete nightmare. Not booting the USB I put it on for the first few times, then eventually after changing the BIOS setting to UEFI and formatting her Disk to GPT it started but then said no image found. In end I tried the old way by using the Windows built in File Recovery Image tool which made me a repair disc and 3 discs for the image itself.
This booted first go and went all way through the recovery, and then did the usual "restarting in X seconds ..." But after it rebooted to my horror the Samsung Logo screen appears and then after that it just stays blank.
It does every few seconds momentarily flicker on the screen but then just goes bank again. I cant even get into the BIOS anymore or boot from anything.
I have a few questions about dual booting windows 7 and windows 8 preinstalled (UEFI) on my Dell laptop.
1. Can I install a non-UEFI version of Windows 7 on my laptop, if so how? 2. Will installing a non-UEFI version of Windows 7 on my laptop break it? 3. Can I use EasyBCD for UEFI? 4. How do I create a UEFI windows 7?
In a few days I will receive a Lenovo Thinkpad X1 Carbon with Windows 8 installed. And separately I will receive an OEM Win7. Win7 is certainly what I intend to use, and I had originally thought I would wipe out Windows 8 and install Win7. But now I am wondering if I can somehow preserve Windows 8 for occasional use. (I would have ordered the machine with Win7 but this is a refurbished machine.)
I would rather not have to understand UEFI. (I'm sure it would be interesting, I just have other things to do with my time.) And, although I do it sometimes, and will if I have to, I do not like diddling with BIOS settings.
I know that factory installed operating systems generally can't be moved to other machines. And I fear that the factory installed Windows 8 that I will receive may not even tolerate being installed, e.g., in a smaller partition or under something like VMware (another complication I'd like to avoid).
My girlfriend has recently got a new laptop and unfortunately she doesn't like it, despite me loving Windows 8.1.
She would like to try Windows 8 but is going back to Uni soon so would like Windows 7 as a back-up dual booted.
I've shrunk the partition and created a simple partition for Windows 7 but really unsure about Installing Windows 7 on a Windows 8 Laptop, it's an ASUS X550CA-XX417H. I've checked power shell with SecureBootUEFI and result is True.
