Setup Installation :: Creating Windows 8 Image Using Dism
Aug 15, 2013
So I'm creating a Windows 8 image with custom software installed, but now i'm stuck on the next steps, I've captured the image but the below link send me in a bit of confusion on the next steps! With win 7 in the past I used to be able to just capture the image and replace the original boot.wim file. Windows 8 doesn't seem to want to let me me do that. it will boot to install but a licence key field appears and doesn't like any licence I use (VLK by the way) What steps should I try and follow next?
View 3 Replies
ADVERTISEMENT
Aug 27, 2014
I have been doing so research lately into system imaging and deploying said image across multiple devices.
I want to image Surface Pro 3s (about 40 of them) with several dozen apps from the app store. My understanding is that if I want to use an image across multiple devices I have to use sysprep to generalize the image. The problem is any app off the app store is account specific and cannot be generalize. If you try to sysprep with apps installed you will get a Fetal Error, and you cant install apps from the store while in audit mode either.
Are there any options available to me, or will this have to be done manually?
View 1 Replies
View Related
Apr 3, 2013
I'm trying to create a Windows Blue WMC image using DISM. I'm running it from my host command prompt (9200).
I think I have to use the following commands:
DISM.exe /Mount-Wim /WimFile:S:Bluereadinstall.wim /index:1 /MountDir:S:Bluemount
DISM.exe /image:S:Bluemount /Set-edition:ProfessionalWMC
DISM.exe /Unmount-Wim /MountDir:S:Bluemount
The first command completes without problems, but the second one generates this error log:
2013-04-03 14:47:37, Info DISM DISM.EXE: <----- Starting Dism.exe session ----->
2013-04-03 14:47:37, Info DISM DISM.EXE:
2013-04-03 14:47:37, Info DISM DISM.EXE: Host machine information: OS Version=6.2.9200, Running architecture=amd64, Number of processors=4
2013-04-03 14:47:37, Info DISM DISM.EXE: Dism.exe version: 6.2.9200.16384
[Code]....
View 3 Replies
View Related
Feb 27, 2014
I am trying to change my language in windows 8.1 from Spanish to English using DISM.
I have downloaded the language pack that I want to install and saved it to the root of my C Drive and renamed it to LP.mlc
I know little about what I am doing! I tried the command in CMD prompt, "dism /Online /Add-Package /PackagePath:C:LP.mlc"
I keep getting the above error code and it wont install.
View 8 Replies
View Related
Apr 15, 2014
I want to try creating a Windows 8 installation USB on my computer and using it to try booting up and repairing my friend's computer which is stuck in recovery mode.
If I put the installation files onto my own personal flash drive and create an installation USB out of it, would I later be able to delete the files off it and continue using it as a regular flash drive?
View 1 Replies
View Related
Mar 1, 2013
I want to know if it's possible to create a clean install DVD.
with pre-installed Windows 8without product key (when I buyed the notebook Windows 8 was already installed - the personal product key is "inside" the notebook).
By the way, can I include the Windows Updates in the install DVD somehow - (and programs which should be pre-installed)?
View 9 Replies
View Related
Dec 8, 2013
I have a Toshiba Laptop System Model: Satellite L875D-S7332 Part Number: PSKFQU-008003 Pre Installed with Windows 8 x64. I want to create a Windows 8 x64 Install Disk.
View 9 Replies
View Related
May 2, 2014
Its my first time to create my first system image in my windows 8. Can I exclude a certain file if not how many blank cd's do I need I got 146GB used currently in my C drive and while creating a system image could it take the process an hour or more?
View 4 Replies
View Related
Jun 29, 2014
I just bought a Laptop with Windows 8.1 it does not come with an install disk and the supplier flat-out refused to provide one, pointing me to the recovery partition saying that was all I needed.
The recovery program just reinstalls, losing data and does not have Windows trouble shooting options as found on the Windows 8 install disk. How do I create a Windows 8.1 install disk.
View 8 Replies
View Related
Aug 17, 2013
I need creating a recovery image of my system. I would like to create an image recovery drive with just the barebones needed for Windows 8 to run. I all ready have a recovery partition created. I just don't know how to create a recovery image for usage whenever something happens to the system.
View 1 Replies
View Related
Jul 8, 2013
I have a laptop that runs Windows 8 (64 bit), and the hard drive is apparently a dynamic (as opposed to basic) disk. My problem comes when I try to make a backup image of my active drive. I know a lot of backup software has troubles making an image of a dynamic disk. Now after researching, I know that Windows 8 comes with its own imaging tool, "Windows 7 File Recovery". I tried to create a basic partition, and used the file recovery tool to create an image file, but the file would not be saved, maybe because the partition itself is on the same dynamic hard-drive (the error said something about the partition not being large enough etc... even though I made it 40GB).
My question is, is the native system imaging tool of Windows 8 unable to copy a dynamic drive, or is it because I need to save the image file to some place other than the hard drive (maybe a whole bunch of DVDs, since it is an option). The last computer that I own is as old as a dinosaur, so I really did not keep up with all these advancement- I just feel that dynamic format is a beast to work with.
View 3 Replies
View Related
Jun 6, 2013
I started to use the "Create System Image" of the "Windows 7 File Recovery" on my Windows 8 laptop. But after the screen which flashes the total size that would be required, when I ask it to start the process expecting it to prompt me for the 1st DVD, it flashes the message, - "The back-up failed. The system is not ready. (0x80070015) " . I am trying this on an out-of-the-box laptop with pre-installed Windows 8. Also tried it by disabling the anti-virus, but to no avail.
Then I tried to start the process with a 4.7 GB blank DVD already in place. Then it flashed the message "Insert a blank media bigger than 1 GB". Since I expected it take anywhere between 3-8 DVDs, I kept about 9 DVDs ready. I also inserted a USB pen-drive of 16 GB and tried to create the system image. Again it flashed the same message of insert a blank media greater than 1 GB in F: (same drive as USB) -??????? I mean the USB is already in place and has been assigned the drive letter as F:. How can I insert a blank media there ??
I am using Windows 8 Single Language. I was able create a repair disc without issues, though.
View 4 Replies
View Related
Aug 12, 2013
Since a week is it impossible to make a Win7 Backup Image (Control Panel).
This is the feature that got removed in 8.1 but now (on 8) I'm still using it in case I need to restore the OS.
The message shows this:
"Not enough disk space" but I have 360GB free on one disk and 150GB on another. The image is calculated at 67GB and it worked each time until now.
All OS updates installed.
View 9 Replies
View Related
Sep 15, 2014
I couldn't repair/replace my laptop's corrupt files doing an sfc or dism scan and had to do a reset as I couldn't do a refresh. I thought my laptop was clean when I created my last system image, last month, but when it came to using the system image I realised there was corrupt files on there too so I had to do another reset. What checks should I do before creating a system image? so I know that as well as there being no viruses there are no corrupt files either. Check for errors in Event Viewer and do an sfc and dism scan?
View 2 Replies
View Related
Mar 14, 2012
I set up Windows 8 Consumer the way I like it -- had to create a custom inf for the screen of my Dell Mini 10 among other things.
I then created a system image on another computer on my network.
Next I wiped and reformatted the disk in the Mini.
But now, when I try to restore from the system image on the network, Windows 8 can't see or recognize the backup. I can browse to the location on my network perfectly well, but no matter what folder I browse to, from the drive letter of the backup drive to the folder named "Backup 2012-03-14 015251," I keep getting a message that there is no image there.
View 4 Replies
View Related
May 27, 2014
I installed Windows on my friends MacBook Air using Bootcamp a few months ago. At that time I made a Windows Image to an external hard drive, not really sure if it was even feasible to restore it. How to do a restore in a situation like this, or if it is possible?
View 3 Replies
View Related
Sep 13, 2013
I have two laptops, both Samsung, one mine and one my sisters. My one is Windows 8 and her one is a slightly older model so Windows 7. Now both are are very similar in spec, being 4GB and Intel Pentium 2.3GHz models. She recently asked me if i could sort out her laptop with Windows 8, so I said yep should be no problem.
I went and bought a Windows 8 Pro 64bit and was at first going to just do a plain install. But then had a bright idea and thought why not do an image of mine and recover it to hers, and then when started up just enter the key of the new one. that way she gets a full original Samsung install along with all the apps and everything.
At first I tried the samsung built in Recovery software but had no luck as it was just a complete nightmare. Not booting the USB I put it on for the first few times, then eventually after changing the BIOS setting to UEFI and formatting her Disk to GPT it started but then said no image found. In end I tried the old way by using the Windows built in File Recovery Image tool which made me a repair disc and 3 discs for the image itself.
This booted first go and went all way through the recovery, and then did the usual "restarting in X seconds ..." But after it rebooted to my horror the Samsung Logo screen appears and then after that it just stays blank.
It does every few seconds momentarily flicker on the screen but then just goes bank again. I cant even get into the BIOS anymore or boot from anything.
View 8 Replies
View Related
May 17, 2013
I want to reformat the hard drive in Windows 8 - Factory Image - in an HP Notebook computer.
HP sent me 3 disks.
View 7 Replies
View Related
Sep 15, 2014
I bought a toshiba satellite with a preinstalled win 8.1. I formatted all that partitioned caos and installed my beloved well known Win 7. Now I have installed win 8.1 again via recovery discs, in order to have a dual boot. Is there a way to install the last image that I created of C:/Win 7 in a new partition? When I try to install it the only chance that seems to be is that of replacing C:/win 8.1. Software, change of Drive letters (how?).
View 5 Replies
View Related
Dec 20, 2013
I am sure I have recovery images. Factory, and refresh. Asus shipped no recovery media. I obtained a copy of windows 8. I found out what my product key is. I have attempted every which way i can think of to get my system to recognize my recovery images exist. If i try to use "reset your pc" option it tells me unable to reset your pc. A required drive partition is missing.
If i choose system image recovery, hit cancel because it thinks the partition that definitely exists, doesn't, choose select a system image. Gives me a blank list. Choose Advanced...install a driver (you don't need to install sata driver as it recognizes my hard drive and Is listing it to choose a driver from should need be) i get an error installation had failed.
Internal error occurred (0x8007054F). No matter which driver IM trying to install. Usb, sata, dvd etc... So can't get my system image from my 32 gig stick, or my hdd.Image won't fit on dvd's. Worried i won't be able to do a clean install, as Asus's backups seem do reliable in mysituation(sarcasm) that i will lose all functionality like DVD playback, smart gesture touchpad, and some driver related setbacks.
I have checked and rechecked, and i have three system images to choose from. Total of six partitions.
View 9 Replies
View Related
Feb 5, 2013
Ive used pirated bootables with preinstalled product keys in the past but am now on the straight and narrow, wanting to add my product key to my legitimate copy of windows 8. This way I wont have to worry about having it written down, losing it or entering it incorrectly, since it will be automatically entered for me. How I can add the product key to my bootable image?
View 3 Replies
View Related
Dec 8, 2013
Here is my situation:
-I have now installed and using two sata hard drive (Drive C "500GB" for OS and other programs and Drive D "1TB" for Games and other Documents)
-I also have SYSTEM IMAGE created before and saved it on my external hard drive.
Now I want to RESTORE that SYSTEM IMAGE saved on my external hard drive to the Drive C "500GB"
My asking is HOW TO DO IT CORRECTLY:
>Should I disconnect/unplug the SATA Cable for the Drive D 1TB before I proceed with the system image restore?
(By the way I have no problem with the procedures on how to do the system image restore)
>OR is there a RISK if I just continue with the system image restore with both SATA CABLES for both HDD not removed?
View 3 Replies
View Related
Sep 11, 2013
I have 10 computers with identical hardware that all have their own oem license. What I want is to have the same setup on all 10 computers. What I remember from previous Windows versions is that you had to activate Windows individually with its own oem key for every computer you restored with a preferred disk image. From what I read the product key procedure is a bit different in Windows 8 and that the key is stored in the bios? The activation should also be handled automatically by Windows, is that correct?
So what I really wonder is: Do I still have to activate every restored pc manually or will Windos 8 do this for me?
A second related question: Are there any imaging/cloning software that can be set up to promt me for a new computer name in the restore process?
View 1 Replies
View Related
Jun 11, 2014
Although I have been able to make a full disk image using the built in "system image" option, I can not find any way to restore it. The recovery options only point to system restore and refresh PC. I'm navigating to <control panel> and then <file history> to access the recovery options. I can not find any restore from system image option anywhere.
Am I missing something, or is it deliberately missing in the Enterprise editions ? If so is there any way I can restore the backup image ?
View 4 Replies
View Related
Mar 5, 2013
Some time ago Installed Windows 7 on one of my Windows 8 computers. But during the install i had to delete all partitions and that was the recovery partition that had he recovery software on it. Well now I want to go back to Windows 8 and I don't really want to send my PC to Samsung for re imaging. But I have the image i made with the software before I installed Windows 8. All I need is to get the recover partition back with the software on it. I have 2 other Samsung computers that have the same software on it but I need to find a way to make a image of the recover partition so i can use my backup image for the computer.
View 2 Replies
View Related
Sep 24, 2013
I am selling my Acer acer m5-481pt-6644 and want to do a factory image restore so the buyer can set it up for themselves.
I have done plenty of image restores on Win 7, but always gone all the way through.
Can I turn the laptop off at some point before I fully set it up, so the buyer will get to set it up for themselves?
View 3 Replies
View Related
Sep 15, 2014
I got two laptops today, one with Windows 7 and the other with Windows 8, both 64-bit machines.
I don't have a windows 8 dvd around and I don't have the internet to download a windows 8 .iso image.
All I have is a USB stick. I'm not sure how creating a system image works but from the last article I read, both computers must have equal disk size or larger and the destination disk of the laptop for the process is a tad smaller than the source partition.
View 2 Replies
View Related
Jun 28, 2013
How to Backup Windows 8.1 ? I can not find the option to repair disc and system image .
View 9 Replies
View Related
Dec 8, 2013
I've recently made a Windows 8 and a Windows 8.1 installation disc from the ISO images on MSDN. Each image includes Core/Core VL and Pro/Pro VL, 32 and 64 bit editions of each. I have the installation keys for all of these installations, but I don't want to have to type an installation key every time I go to use this disc. I've tried adding an installation key using WinReducer8 (which I do not recommend), but it only adds one key, which means I cannot choose which edition I want to install.
When I made my AIO Windows 7 ISO, I had no issues, as Windows 7 doesn't force you to add an installation or product key; you select your desired edition and you're good to go. Attached Image 1 shows what I'm referring to.
Now, however, Windows 8 has to choose your edition by the product key you enter (well played, Microsoft), and I want to find a way around this.
Win7 64 Test.pngWin8.png
View 9 Replies
View Related
Feb 27, 2012
I was just wondering if it was possible to slim down the installation image of Windows Developer Preview? I'm in need of installing it to a 16GB SSD so it's going to be quite a squeeze. For Windows 7 I could use Vlite, but I'm guessing this is not the same with Windows 8, any more.
Is there a similar utility for Windows Developer Preview yet like Vlite?
View 7 Replies
View Related
Mar 11, 2014
I was installing Windows 8 at my desktop pc.Suddenly power cut occured and it caused the compute to shut down.Then when I restarted my pc again a messege appeared saying that the installation has been corrupted and it can't be continued and it doesn't log on.After that when I tried to re-install Windows 8 the setup got stuck at the "setup is starting" window.I waited overnight for it to go and the installation to start.But it doesn't happen.I have tried to re-install several times but the same problen happens again and again.So neither I can log into my computer now nor I can re-install windows.I don't know what to do.
View 9 Replies
View Related
