Setup Installation :: How To RESTORE System Image CORRECTLY
Dec 8, 2013
Here is my situation:
-I have now installed and using two sata hard drive (Drive C "500GB" for OS and other programs and Drive D "1TB" for Games and other Documents)
-I also have SYSTEM IMAGE created before and saved it on my external hard drive.
Now I want to RESTORE that SYSTEM IMAGE saved on my external hard drive to the Drive C "500GB"
My asking is HOW TO DO IT CORRECTLY:
>Should I disconnect/unplug the SATA Cable for the Drive D 1TB before I proceed with the system image restore?
(By the way I have no problem with the procedures on how to do the system image restore)
>OR is there a RISK if I just continue with the system image restore with both SATA CABLES for both HDD not removed?
View 3 Replies
ADVERTISEMENT
Sep 11, 2013
I have 10 computers with identical hardware that all have their own oem license. What I want is to have the same setup on all 10 computers. What I remember from previous Windows versions is that you had to activate Windows individually with its own oem key for every computer you restored with a preferred disk image. From what I read the product key procedure is a bit different in Windows 8 and that the key is stored in the bios? The activation should also be handled automatically by Windows, is that correct?
So what I really wonder is: Do I still have to activate every restored pc manually or will Windos 8 do this for me?
A second related question: Are there any imaging/cloning software that can be set up to promt me for a new computer name in the restore process?
View 1 Replies
View Related
Oct 21, 2013
Windows 8.1 64 bit pc48 GB RamIntel i7 - 3960X CPUBoxxTech ComputerDrive C: SSD - 446 GB
When I first got my new personal computer in January, I created a System Image using Microsoft's utility. I typically use Acronis for my backups, but after major changes, I use both Microsoft and Acronis.
Now, I am attempting to complete a System Image Backup using Microsoft's utility so that I can fix my SecureBoot concern, knowing that I have a safety net in place. Unfortunately, I am unable to complete a backup. BoxxTech suggests that I use Microsoft's utility.
I begin with the File History in the Control Panel as shown below. Note, that I have plenty of room on my FreeAgent F Drive (standalone USB drive). Yet, Microsoft's utility believes otherwise.
Only the three items that shown to be selected are selected. In other words, there are no other drives or partitions off-screen that are selected.
Thinking that it might be a problem with my external USB hard drive, I look at using one of my internal drives, T.
I get the same error message as shown earlier.
why I am unable to back-up my personal computer using Windows 8.1?
View 9 Replies
View Related
Jun 11, 2014
Although I have been able to make a full disk image using the built in "system image" option, I can not find any way to restore it. The recovery options only point to system restore and refresh PC. I'm navigating to <control panel> and then <file history> to access the recovery options. I can not find any restore from system image option anywhere.
Am I missing something, or is it deliberately missing in the Enterprise editions ? If so is there any way I can restore the backup image ?
View 4 Replies
View Related
Sep 24, 2013
I am selling my Acer acer m5-481pt-6644 and want to do a factory image restore so the buyer can set it up for themselves.
I have done plenty of image restores on Win 7, but always gone all the way through.
Can I turn the laptop off at some point before I fully set it up, so the buyer will get to set it up for themselves?
View 3 Replies
View Related
Mar 14, 2012
I set up Windows 8 Consumer the way I like it -- had to create a custom inf for the screen of my Dell Mini 10 among other things.
I then created a system image on another computer on my network.
Next I wiped and reformatted the disk in the Mini.
But now, when I try to restore from the system image on the network, Windows 8 can't see or recognize the backup. I can browse to the location on my network perfectly well, but no matter what folder I browse to, from the drive letter of the backup drive to the folder named "Backup 2012-03-14 015251," I keep getting a message that there is no image there.
View 4 Replies
View Related
Jun 28, 2013
How to Backup Windows 8.1 ? I can not find the option to repair disc and system image .
View 9 Replies
View Related
Sep 9, 2013
Factory reset on windows 8.
My son decided to reset his windows 8 laptop to original factory settings, during the reset process his mom decided it was taking to long and turned off the laptop.
Now when its turned on it shows the message "restoring your computer", this message will then change to "diagnosing your computer", the screen will then go blank and it start all over again.
I can boot it from a USB drive, but when I click on "repair" i get an error message that it cant repair the computer. When i try to run restore from the USB I get a similar message.
is there anyway to run the system restore from the DOS prompt?
View 9 Replies
View Related
Mar 28, 2014
I made a system image from Windows 8.1 using Windows' own system image feature. I seem to be unable to restore it. I booted with the Windows 8 disc, and told it to restore from a system image. It found the image, ran a few minutes, then failed because of version mismatch (?). Not before hosing the entire system, by the way. Luckily, I was well backed up.
I booted with the Windows 7 disc, and it didn't even see the system image (on my external HD). It saw my Windows 7 system image and restored it just fine, and here I am.
Anyway, is there some trick to restoring a Windows 8.1 system image? I am not running Windows 8.1, so I can't generate a repair disk that way. Is there one available online somewhere for download?
View 7 Replies
View Related
Apr 17, 2013
My windows 8 pro install messed up n i have almost 2.8tb of stuff on my drive on a 3tb hd. I have an identical hd as a backup which i have (an apparently successful) a backup of my system from a couple of weeks ago on. I had set the system to do scheduled backups of the system (set to backup a system image of efi partition and c. There were a few times where i was trying to get other things done and the systemwas running slow so i cancelled the backups when i noticed them running. The software stopped the backups (seemingly successfully).
As i say my system messed up - i came home to find out it was no longer downloading (as i had left it doing when i went to work) but was on a blue screen (bsod?) saying the system needs to be restarted. Since then it didnt work well at all and after dskchk reported that several sectors were damaged so it was moving data to spare sectors (or whatever it generally reports when this happens) there were a lot of files messed up or reported as deleted when doing a file recovery scan with recuvva.
So i decided to restore the backed up system image from the other hd. Incidentally i tried mounting the vhdx backup image from that hd via windows explorer which then reported "the disk needs formatting" and didnt get any success mounting via disk management either (it mounted in the app but didnt show up on windows explorer and if i tried to access info on it via disk management it reported the same"disk needs formatting prompt".
So when i booted my win 8 dvd it didnt work cos the dvd wasnt an efi booting version so i had to boot from a usb version with the efi bit included.
I formatted the system drive and chose to do an image restore. It started doing the restore (apparently) but every time i came back to it later i had the follwing error:
"Re-image your computer
The system image restore failed.
Error details: The requested system device cannot be identified due to multiple indistinguishable devices potentially matching the identification criteria Ox80073B92"
It took me so long to set up my system n i have a lot of my own data on there too. The system drive I formatted was created in diskpart and then re formatted with "format" command (as it created the disk in raw mode) so now it is ntfs mode (uncompressed).
View 9 Replies
View Related
May 15, 2014
I have two hard disks, and I have a system image that I made of the OS, it is stored on the second disk, the one without the OS. Both disks have sharing turned off.
What happens if I can't boot into Windows, and I want to use EaseUS backup to restore my system? Will I be able to access the system image, if I boot from the EaseUS live CD? Or will I be denied access, because it is not a shared disk?
And generally speaking, is it advisable to have sharing turned off, or on? I am not on a network, but I have several user accounts on the same OS. What security settings are good for my situation.
Okay, experience is the best tutor. I booted from the CD to see what would happen, and yes, it can read the system image file off of the hard disk. But I would still like to know what are the security settings for sharing etc.
View 2 Replies
View Related
Apr 6, 2014
I have a Lenovo G585 laptop that I installed with Linux (tried dual boot) and accidentally wiped out the Windows 8.1 restore partition. Now I want to restore it to Windows. I also have a Dell desktop Windows 8.1 that I can use to to create a USB restore image, can I use a restore image from a desktop to fix a laptop?
View 2 Replies
View Related
May 8, 2014
I am using Windows 8.1x64 in UEFI mode. My motherboard is Gigabyte H77M-D3H. My hard disk is configured to use AHCI. A few days back I needed to use system restore from my repair disk because of a system crash. To my horror when I selected System Restore from my Windows repair disk it showed-:
"To use System Restore, you must specify which Windows Installation to restore. Restart this computer select an operating system, and then select system restore."
Now I don't have multiple Windows installations but I do have Debian Linux x64 dual booted with Windows 8.1. the Debian Linux also boots in UEFI mode. Is this problem caused by the fact that I am dual booting ? Has Linux dual booted, check if you can system restore from the windows repair disk.
I can perform a system restore from the inside of the OS fine. But I need it working from the outside also. What I have tried is running diskpart from the repair disk and selecting my partition on which Windows is installed and then running system restore but this had no effect. Can I boot up windows and then select to boot from my CD ? Like, before Windows completes booting I can have the repair disk boot up or something. Could it be that I am booting my CD in legacy rather than UEFI ?
PS-: My Windows 8 was upgraded from an installation of Windows 7. But I have already deleted the Windows.old folder in C drive.
View 3 Replies
View Related
Mar 7, 2013
I've been dual-booting Windows 8 Pro and Windows 7 Ultimate, but a while back my Windows 8 kind of went "South" and wouldn't boot at all (I got an error message that a device was "not attached"). I have a recent system image on an external USB hard drive, but when I boot to "system recovery" using my repair disk it can't seem to find my USB drive at all.
The tutorials here mention installing a SATA driver to access disks that are not recognized, but this doesn't seem to be the case.
View 5 Replies
View Related
Sep 15, 2014
I bought a toshiba satellite with a preinstalled win 8.1. I formatted all that partitioned caos and installed my beloved well known Win 7. Now I have installed win 8.1 again via recovery discs, in order to have a dual boot. Is there a way to install the last image that I created of C:/Win 7 in a new partition? When I try to install it the only chance that seems to be is that of replacing C:/win 8.1. Software, change of Drive letters (how?).
View 5 Replies
View Related
Dec 20, 2013
I am sure I have recovery images. Factory, and refresh. Asus shipped no recovery media. I obtained a copy of windows 8. I found out what my product key is. I have attempted every which way i can think of to get my system to recognize my recovery images exist. If i try to use "reset your pc" option it tells me unable to reset your pc. A required drive partition is missing.
If i choose system image recovery, hit cancel because it thinks the partition that definitely exists, doesn't, choose select a system image. Gives me a blank list. Choose Advanced...install a driver (you don't need to install sata driver as it recognizes my hard drive and Is listing it to choose a driver from should need be) i get an error installation had failed.
Internal error occurred (0x8007054F). No matter which driver IM trying to install. Usb, sata, dvd etc... So can't get my system image from my 32 gig stick, or my hdd.Image won't fit on dvd's. Worried i won't be able to do a clean install, as Asus's backups seem do reliable in mysituation(sarcasm) that i will lose all functionality like DVD playback, smart gesture touchpad, and some driver related setbacks.
I have checked and rechecked, and i have three system images to choose from. Total of six partitions.
View 9 Replies
View Related
Feb 5, 2013
Ive used pirated bootables with preinstalled product keys in the past but am now on the straight and narrow, wanting to add my product key to my legitimate copy of windows 8. This way I wont have to worry about having it written down, losing it or entering it incorrectly, since it will be automatically entered for me. How I can add the product key to my bootable image?
View 3 Replies
View Related
Feb 25, 2014
I have a USB HDD for my laptop (About 1TB). If worse comes to worse, is it possible to restore from System Image that I create on that USB HDD, or does it have to be a USB flash drive?
View 8 Replies
View Related
Aug 15, 2013
So I'm creating a Windows 8 image with custom software installed, but now i'm stuck on the next steps, I've captured the image but the below link send me in a bit of confusion on the next steps! With win 7 in the past I used to be able to just capture the image and replace the original boot.wim file. Windows 8 doesn't seem to want to let me me do that. it will boot to install but a licence key field appears and doesn't like any licence I use (VLK by the way) What steps should I try and follow next?
View 3 Replies
View Related
Jul 17, 2013
I'm mostly a Linux user, but I recently bought a laptop with Windows 8 on it. After a few days dual booting I decided it wasn't for me, so I decided to delete the windows partitions and usa just Linux. I would like, however, to keep the recovery partition, so to be able to easily reinstall Windows again if I felt like I needed to, but I'm not sure what partitions should I keep. Here's a picture of my hard drive partitions as of now:
Do I need more than the restore partition? Can I get rid of the boot one? What about the recovery one? And the one flagged msftres?
View 1 Replies
View Related
Nov 6, 2013
Final steps in my recovery process. I'm running a Windows 8 recovery disc off of a USB, and I'm trying to restore, refresh, reset, anything at this point.
But I go into all the troubleshooting options and advanced options and it doesn't allow me to "choose a target operating system" as nothing appears such as my Windows 8.
I'm on an Asus laptop, I've backed-up my files to an external hdd, so at this point I just want to get my laptop running again.This all started with the "automatic repair loop" to which I've used EasyRE to purchase a recovery disc, backed up my files, and now I'm at this point where I can't finalize the process.
Also how should I be booting from a USB properly?I hold F2 on start up, switch to "Boot" and set "Launch CSM" to Enabled. Then switch to "Security" and set "Secure Boot Control" to Disabled. Then restart and hold Esc for the Boot menu and boot from the USB.
I'm willing to do whatever to simply reset my laptop. Tried everything that I've found, text in that black command box (I'm really not too flash with computers) like the chkdsk and it all came out fine. It's just when I go to try to recover/restore/reset ANYTHING when I've booted from the USB it tells me there isn't an operating system to do so from.
View 9 Replies
View Related
Aug 27, 2014
I have been doing so research lately into system imaging and deploying said image across multiple devices.
I want to image Surface Pro 3s (about 40 of them) with several dozen apps from the app store. My understanding is that if I want to use an image across multiple devices I have to use sysprep to generalize the image. The problem is any app off the app store is account specific and cannot be generalize. If you try to sysprep with apps installed you will get a Fetal Error, and you cant install apps from the store while in audit mode either.
Are there any options available to me, or will this have to be done manually?
View 1 Replies
View Related
Mar 5, 2013
Some time ago Installed Windows 7 on one of my Windows 8 computers. But during the install i had to delete all partitions and that was the recovery partition that had he recovery software on it. Well now I want to go back to Windows 8 and I don't really want to send my PC to Samsung for re imaging. But I have the image i made with the software before I installed Windows 8. All I need is to get the recover partition back with the software on it. I have 2 other Samsung computers that have the same software on it but I need to find a way to make a image of the recover partition so i can use my backup image for the computer.
View 2 Replies
View Related
May 27, 2014
I installed Windows on my friends MacBook Air using Bootcamp a few months ago. At that time I made a Windows Image to an external hard drive, not really sure if it was even feasible to restore it. How to do a restore in a situation like this, or if it is possible?
View 3 Replies
View Related
Aug 5, 2013
Automatic Restore Points is not working in System Restore. Task Scheduler is empty during last 30 days.
View 9 Replies
View Related
Feb 19, 2014
I have recently Dual Booted my Computer with Win 7, XP and Windows 8.1.
I now cannot boot into Windows 8.1
I installed Easy BCD and was able to make a bootloader but i can only boot into Win 7 and XP
View 9 Replies
View Related
Dec 22, 2012
I have dual booted my lappy with win7 ultimate and Windows 8 pro using vhd.i have installed windows8 on vhd,but due to that i can't use the fast start and system rating in Windows 8.so i want to restore my Windows 8 vhd to my hardisk. I have 4 partitions on my hardisk i can use any one of them to recover win 8.
View 3 Replies
View Related
Sep 13, 2013
I have two laptops, both Samsung, one mine and one my sisters. My one is Windows 8 and her one is a slightly older model so Windows 7. Now both are are very similar in spec, being 4GB and Intel Pentium 2.3GHz models. She recently asked me if i could sort out her laptop with Windows 8, so I said yep should be no problem.
I went and bought a Windows 8 Pro 64bit and was at first going to just do a plain install. But then had a bright idea and thought why not do an image of mine and recover it to hers, and then when started up just enter the key of the new one. that way she gets a full original Samsung install along with all the apps and everything.
At first I tried the samsung built in Recovery software but had no luck as it was just a complete nightmare. Not booting the USB I put it on for the first few times, then eventually after changing the BIOS setting to UEFI and formatting her Disk to GPT it started but then said no image found. In end I tried the old way by using the Windows built in File Recovery Image tool which made me a repair disc and 3 discs for the image itself.
This booted first go and went all way through the recovery, and then did the usual "restarting in X seconds ..." But after it rebooted to my horror the Samsung Logo screen appears and then after that it just stays blank.
It does every few seconds momentarily flicker on the screen but then just goes bank again. I cant even get into the BIOS anymore or boot from anything.
View 8 Replies
View Related
May 17, 2013
I want to reformat the hard drive in Windows 8 - Factory Image - in an HP Notebook computer.
HP sent me 3 disks.
View 7 Replies
View Related
Feb 17, 2013
I would like to reinstall Win 8 on my ASRock UEFI motherboard in the UEFI mode. I have Win 7 OEM and the downloaded Win 8 Pro upgrade. I have the Win 8 Pro upgrade burned to an ISO disc. I also have the hard drive backed up to Acronis 2013 and have an Acronis WinPE rescue disc to boot with to restore.
Several questions.
(1) If I convert to UEFI and format the drive to GPT, will Acronis restore to the GPT (from MBR)?
(2) If Acronis won't restore, will converting to UEFI/GPT affect installing or activating the Win 7 OEM and/or the Win 8 Pro upgrade (I assume I'll have to install Win 7 and then upgrade to Win 8).
(3) Will a UEFI system read other hard drives that are MBR formatted?
View 9 Replies
View Related
Sep 29, 2013
Is it possible to create restore discs that return the PC back to factory state (just out of box, never turned on)?
View 6 Replies
View Related
