Setup Installation :: Windows 8 Won't Recognize System Image On Network
Mar 14, 2012
I set up Windows 8 Consumer the way I like it -- had to create a custom inf for the screen of my Dell Mini 10 among other things.
I then created a system image on another computer on my network.
Next I wiped and reformatted the disk in the Mini.
But now, when I try to restore from the system image on the network, Windows 8 can't see or recognize the backup. I can browse to the location on my network perfectly well, but no matter what folder I browse to, from the drive letter of the backup drive to the folder named "Backup 2012-03-14 015251," I keep getting a message that there is no image there.
I have a HP Envy 4 Ultrabook and I want to install Windows 8 from scratch, I put the installation files on a flash drive from a DVD of Win 8 I had, but when I go to install it, it says the "We couldn't find any drives". I have tried using DiskPart within the CMD as well, but it only finds my flash drive when I run list disk. Also, my drives are completely formatted, and I accidentally wiped the recovery partition. I tried with a USB of Win 8 Pro, and it was fine, showing all of my drives correctly, but that version is linked to another PC, so I can't install it. Also, I booted into a Linux Mint live CD and tried to install it, it sees my hard drive correctly, but the Windows install does not, I can't figure this out, never encountered it before. Is Linux my only option at this point?
I have to galaxy s2 one of of the can't connect to the pc and the other one can. The one which dosn't connect a messege pops up ( the last device you connected to this computer malfunctioned and windows dosen't recognize it.
I have been routinely backuping my OS and important files using Windows 7 backup on a NAS. It just so happened that I needed to re-image my OS drive and I got into the Windows 8 recovery boot sequence.
Under the Advanced tools I selected the System Image Recovery and tried to look for the system image on the network path. Although the prompt said it was connecting to the network , the network share was not found. the command prompt couldn't ping google.com and netsh wlan <SSID> command did not work in hopes of connecting to my local wifi.
Is there a way to connect to the wifi network where my NAS is connected to in order to re-image from the system image found on the NAS? Luckily , there was an older image on a separate local HDD that I could re-image from but I would prefer if I could connect to the NAS during the recovery process.
I have two hard disks, and I have a system image that I made of the OS, it is stored on the second disk, the one without the OS. Both disks have sharing turned off.
What happens if I can't boot into Windows, and I want to use EaseUS backup to restore my system? Will I be able to access the system image, if I boot from the EaseUS live CD? Or will I be denied access, because it is not a shared disk?
And generally speaking, is it advisable to have sharing turned off, or on? I am not on a network, but I have several user accounts on the same OS. What security settings are good for my situation.
Okay, experience is the best tutor. I booted from the CD to see what would happen, and yes, it can read the system image file off of the hard disk. But I would still like to know what are the security settings for sharing etc.
So I'm creating a Windows 8 image with custom software installed, but now i'm stuck on the next steps, I've captured the image but the below link send me in a bit of confusion on the next steps! With win 7 in the past I used to be able to just capture the image and replace the original boot.wim file. Windows 8 doesn't seem to want to let me me do that. it will boot to install but a licence key field appears and doesn't like any licence I use (VLK by the way) What steps should I try and follow next?
I have been doing so research lately into system imaging and deploying said image across multiple devices.
I want to image Surface Pro 3s (about 40 of them) with several dozen apps from the app store. My understanding is that if I want to use an image across multiple devices I have to use sysprep to generalize the image. The problem is any app off the app store is account specific and cannot be generalize. If you try to sysprep with apps installed you will get a Fetal Error, and you cant install apps from the store while in audit mode either.
Are there any options available to me, or will this have to be done manually?
I installed Windows on my friends MacBook Air using Bootcamp a few months ago. At that time I made a Windows Image to an external hard drive, not really sure if it was even feasible to restore it. How to do a restore in a situation like this, or if it is possible?
I've been dual-booting Windows 8 Pro and Windows 7 Ultimate, but a while back my Windows 8 kind of went "South" and wouldn't boot at all (I got an error message that a device was "not attached"). I have a recent system image on an external USB hard drive, but when I boot to "system recovery" using my repair disk it can't seem to find my USB drive at all.
The tutorials here mention installing a SATA driver to access disks that are not recognized, but this doesn't seem to be the case.
I have two laptops, both Samsung, one mine and one my sisters. My one is Windows 8 and her one is a slightly older model so Windows 7. Now both are are very similar in spec, being 4GB and Intel Pentium 2.3GHz models. She recently asked me if i could sort out her laptop with Windows 8, so I said yep should be no problem.
I went and bought a Windows 8 Pro 64bit and was at first going to just do a plain install. But then had a bright idea and thought why not do an image of mine and recover it to hers, and then when started up just enter the key of the new one. that way she gets a full original Samsung install along with all the apps and everything.
At first I tried the samsung built in Recovery software but had no luck as it was just a complete nightmare. Not booting the USB I put it on for the first few times, then eventually after changing the BIOS setting to UEFI and formatting her Disk to GPT it started but then said no image found. In end I tried the old way by using the Windows built in File Recovery Image tool which made me a repair disc and 3 discs for the image itself.
This booted first go and went all way through the recovery, and then did the usual "restarting in X seconds ..." But after it rebooted to my horror the Samsung Logo screen appears and then after that it just stays blank.
It does every few seconds momentarily flicker on the screen but then just goes bank again. I cant even get into the BIOS anymore or boot from anything.
I bought a toshiba satellite with a preinstalled win 8.1. I formatted all that partitioned caos and installed my beloved well known Win 7. Now I have installed win 8.1 again via recovery discs, in order to have a dual boot. Is there a way to install the last image that I created of C:/Win 7 in a new partition? When I try to install it the only chance that seems to be is that of replacing C:/win 8.1. Software, change of Drive letters (how?).
I am sure I have recovery images. Factory, and refresh. Asus shipped no recovery media. I obtained a copy of windows 8. I found out what my product key is. I have attempted every which way i can think of to get my system to recognize my recovery images exist. If i try to use "reset your pc" option it tells me unable to reset your pc. A required drive partition is missing.
If i choose system image recovery, hit cancel because it thinks the partition that definitely exists, doesn't, choose select a system image. Gives me a blank list. Choose Advanced...install a driver (you don't need to install sata driver as it recognizes my hard drive and Is listing it to choose a driver from should need be) i get an error installation had failed.
Internal error occurred (0x8007054F). No matter which driver IM trying to install. Usb, sata, dvd etc... So can't get my system image from my 32 gig stick, or my hdd.Image won't fit on dvd's. Worried i won't be able to do a clean install, as Asus's backups seem do reliable in mysituation(sarcasm) that i will lose all functionality like DVD playback, smart gesture touchpad, and some driver related setbacks.
I have checked and rechecked, and i have three system images to choose from. Total of six partitions.
Ive used pirated bootables with preinstalled product keys in the past but am now on the straight and narrow, wanting to add my product key to my legitimate copy of windows 8. This way I wont have to worry about having it written down, losing it or entering it incorrectly, since it will be automatically entered for me. How I can add the product key to my bootable image?
I have 10 computers with identical hardware that all have their own oem license. What I want is to have the same setup on all 10 computers. What I remember from previous Windows versions is that you had to activate Windows individually with its own oem key for every computer you restored with a preferred disk image. From what I read the product key procedure is a bit different in Windows 8 and that the key is stored in the bios? The activation should also be handled automatically by Windows, is that correct?
So what I really wonder is: Do I still have to activate every restored pc manually or will Windos 8 do this for me?
A second related question: Are there any imaging/cloning software that can be set up to promt me for a new computer name in the restore process?
Although I have been able to make a full disk image using the built in "system image" option, I can not find any way to restore it. The recovery options only point to system restore and refresh PC. I'm navigating to <control panel> and then <file history> to access the recovery options. I can not find any restore from system image option anywhere.
Am I missing something, or is it deliberately missing in the Enterprise editions ? If so is there any way I can restore the backup image ?
Some time ago Installed Windows 7 on one of my Windows 8 computers. But during the install i had to delete all partitions and that was the recovery partition that had he recovery software on it. Well now I want to go back to Windows 8 and I don't really want to send my PC to Samsung for re imaging. But I have the image i made with the software before I installed Windows 8. All I need is to get the recover partition back with the software on it. I have 2 other Samsung computers that have the same software on it but I need to find a way to make a image of the recover partition so i can use my backup image for the computer.
Just upgraded to Win 8.1 Pro from Win 8 on a Dell Latitude E6530. Everything was working fine; post upgrade, system does not recognize any of my SD cards upon insertion. [Don't even see a drive letter show up.] All other peripheral storage devices are fine.
I got two laptops today, one with Windows 7 and the other with Windows 8, both 64-bit machines.
I don't have a windows 8 dvd around and I don't have the internet to download a windows 8 .iso image.
All I have is a USB stick. I'm not sure how creating a system image works but from the last article I read, both computers must have equal disk size or larger and the destination disk of the laptop for the process is a tad smaller than the source partition.
I am trying to create a system image backup and I keep getting this error message
[COLOR=#FF0000]'Threre is not enough disk space to create the volum shadow copy on storage location. Make sure that for all volume to be backup up, the minimum disk space required for shadow copy creation is available. this applies to both the backup storage destination and volume included in the backup. Minimum requirement for Volumes less than 500 megabytes, the minimum is 50 megabyte of free space. for voulimes more than 500 megabytes, the minimum is 320 megabytes of free space. Recommended at least 1 gigabytes free of disk space on each volumes if volumes size is more than 1 gigabytes (0x80780119)"
I am backing it up to a external HDD with over a tb of free space but I understand its not letting me perform the backup because the hidden 100mb hidden system partition is full...if i create a larger partition how can I copy that system partition to it? if that is possible....
Here's my issue; I am a math and science teacher in a public middle school and am outfitting my class with thirty brand-new Lenovo touch computers. I consider myself above-average savvy with computers, having worked with every version of Windows extensively since the late 80s and DOS. The only OS that I haven't spent much time on is Windows 8.
These computers are all brand-new and of course have legal copies of Windows 8 -- irritatingly, though not yet updated to 8.1. Soo...It took me a larger part of one day just to get ONE of these computers ready for class use. It involved several stages of the Windows update/reboot dance, followed by removing myriad unneeded bloatware applications, setting up multiple child accounts on the machine, and finally installing some freeware educational materials needed for instruction. It was all unbelievably tedious!
I turned around and look at all the remaining twenty-nine computers with dread. Obviously I'm trying to work out some kind of shortcut to avoid having to spend my whole summer updating each of the new machines individually. In an ideal world, I would make some sort of image of the machine that I just spent several hours updating/configuring, and then replicate that across the other twenty-nine. In terms of hardware, this shouldn't be a problem since all of the machines are exactly the same make and model. But I anticipate other problems such as, for example, the serial number of the Windows version and the computer name will then be the same on all the machines and have to be adjusted. There very well could be other issues with replicated serial numbers, etc.
I'm thinking maybe I just have to bite the bullet and work at each individual computer one of the time. And then image them individually so that when the kids mess around with them, I can do an easy restore. How I could make this work?
I'm trying to recreate win 8.1 pro system reserved partition on my ssd. Initially I installed windows on my ssd (c: ) and windows created the sysres partition on my unformatted hd (without telling me anything). After some trouble I managed to be able to boot from ssd directly without going through the sysres partition on the hd. Now if possible I'd like to recreate the sysres on the ssd (by disconnecting my hd so that windows has no other options than creating this on the ssd). If a try a system refresh it tells me it would wipe away all my user installed apps.
Ok so i am trying to install windows 8 X64 onto a different hard drive as windows 7 so i can switch between the two at startup.Ok so my problems started yesterday when trying to install windows 8 onto the Hard Drive i was getting"Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks."To fix this i converted the disk to a GPT disk in Disk ManagerNow im getting the Error "Setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more Information." Here is a screenshot of disk manager at the moment.I am trying to install Windows 8 to Disk 2.
I am currently running Windows 8.1 and I want to do a clean install back to Windows 8. I have the original 64-bit Windows 8 Pro DVD. I put this DVD into my DVD drive and rebooted. I then went into the BIOS and made sure the first boot device was set to DVD/CDROM.
When I restart my computer it never gives me the option of booting to the DVD it just takes me back to the Operating System (my login screen).
My question is, how do I get my system to bootup from the Windows 8 Pro DVD so that I can do a fresh install?
I have (perhaps I should say had) a multi-boot system. Originally I installed my 6 Windows OS's and then installed my two favorite Linux distros. I like the ability to customize the Grub menu which Linux gives me. Unfortunately Grub did not detect all 6 of my Windows installations but one of the boot options it did detect took me back into my original Windows menu which showed all 6 of the Windows systems. So that's the setup which I have been using successfully for the past few months. (One boot menu which boots into another). Today my Windows boot menu has become unusable and probably corrupt.
At first I had the problem that I was only able to boot into Windows 8.1 (no windows menu at all). Then I used EasyBCD which I had inside Windows 8.1 At first EasyBCD indicated an inability to load any boot file at all. Subsequently after rebooting into 8.1 a few times more I tried it again. It then showed a boot menu but with only Windows 8.1 listed. I subsequently was able to use the add operating system function to add all the other Windows systems again. I then clicked save to save the new configuration. Now I do see all six Windows systems at boot but neither of them, even Windows 8.1 will boot. Where I should start to get back into one of these six Windows operating systems so that I can possible use the EasyBCD repair function to access the others. I think I had EasyBCD installed inside each Windows OS At the moment I am dependent on Linux alone for Internet access. I trust this is clear.
As nothing in Linux has changed, I assume I need to fix the problem from the Windows side of things. I do have that one option when I get into that blue Windows 8 style boot menu to "change options" I thought EasyBCD would have restored the Windows 7 style text boot menu but it did not. Other than that I have the various Windows installation disks and a Win7 repair disk as well as various full partition backups on an external hard drive. What do do about a corrupt bcd file without being inside Windows, and I don't know much about EasyBCD. Would a refresh/reset of Win 8.1 from the install disk be a good way to start? I did get the message of "files missing" when I tried to do a system recovery drive while inside Windows 8.1 today, so there are issues with that OS.
Setting up a dual boot with Win 7x64 on a 120GB SSD. The partition for Win 8 has 48 GB, but the install is failing: "Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks." The first time I tried with the partition formatted, the second with it unallocated, both getting the same result. What am I missing?