Setup Installation :: No Recovery Partition After Clean Install Of Windows 8.1
Dec 2, 2013
I built up a new PC featuring a brand new SSD (i.e fully unallocated). Then, I made a clean install of Windows 8.1 pro (64bits) using an ISO DVD. Using Windows disk management tool after the install, I can see that only two partitions have been created: one System partition in NTFS (350MB) and the remaining of the SSD is the C: partition while I was expecting a third one : a recovery partition. Of course, I do not remember a prompt during the install to ask whether I want a recovery parttion or not.
Is it normal ? Is a recovery partition useful knowing I have the install DVD ? If the recovery partition has some advantages, is there a way to create it after the install is completed ?
How to make a clean install on my Samsung Series 5 550P5C, but I hear from here to there that when I do it I will delete my Recovery Partition (which I would like to have on the disc in some radical case). However I saw a thread when someone performed a clean install and didn't lost the recovery partition. Additionally I think it should not be able to remove it installing Windows on C partition, as this is another partition on the disc - than Recovery part.
If you have a recovery drive - that includes the recovery partition - made on one computer, but have a toshiba laptop with a bad drive (but the recovery partition is ok), can you replace/copy the partition on the recovery drive with the recovery partition from the bad laptop HD?
My friend's laptop would not boot, and would not factory recover, reset, or refresh. I tried to clone the hard drive before I started messing with the disc. It would not clone, but I was able to copy the recovery partition to a USB drive.
He never make recovery discs, so could not re-install, but I can borrow the recovery drive that my aunt made for her laptop.
I just got a new laptop, a Lenovo X230, for which I paid extra to have the OS on it as Windows 8 Pro.
So--now I have it, and Win 8 Pro 64 is installed and activated on it. I am a legal owner of Win 8 Pro.
However, I would like to do a clean install of Win 8 on the computer, to have it free of bloatware, etc. (In fact, I would like to set up a multi-boot with Win 7, and perhaps even triple boot with Xp as well. (I have installation media and my product keys for XP and 7 though, so those are not really a problem.)
The computer came with no discs at all. There is a procedure to make recovery disks. I may do that, but I think those will be to restore the computer to how it came from the factory, and therefore not usable for a clean install.
I don't see my product key for Win 8 anywhere. Not on the computer, not on any kind of card that came with it, etc.
I looked at the tutorial here for clean install of Windows 8, but it requires an install disc and product key. I have neither, although I am a legal owner of Windows 8.
Is there a way I can create (from my installed Windows 8) a win 8 install disk, that can be used for a clean install? Or a link to download one? Is there a way I can get my product key?
How windows 8 works now without the sticker key on new laptops. I've searched all over the internet and all I can find are dumb articles telling users to use the manufacturers recovery image. How to do a CLEAN install of Windows 8.
My new windows 8 has NO sticker key on the bottom so my understanding is that it's stored on the bios? Is this correct? So my question is, is if I get an ISO of windows 8 and install it, will it automatically recognize the key or is the key only set up to be recognized by the PC manufacturers crapware filled image?
ALSO, if thats the case, can I use a 3rd party product to pull my key and then use that with the clean ISO? Lastly, where can I download a clean ISO of windows 8? I know you can download official windows 7 ISO's, but i cannot seem to find an official windows 8 iso. I have no desire to download a torrent or from some shady website, I just want an official ISO.
Until very recently i was running Windows 8 with a 240 GB Sandisk SSD as a primary and a 2 TB Western Digital Green HDD as a storage. I decided to set up a RAID 1 setup so i purchased a second 2 TB HDD and installed it.
My intent was to run windows 8 off the 240 SSD as a primary and have a RAID 1 setup for my 2TB HDDs.
I learnt that my data configuration was set to AHCI. I decided to do a complete clean install and change the sata configuration in BIOS to RAID.
After successfully creating a RAID volume using my 2TB HDDs i proceeded to install Windows off my primary. I am however having difficulties in that it will not allow me to install windows on either drive.
I have some problems with my laptop ASUS K55VD. I had windows 8, but with the store of windows I have updated to windows 8.1.
I have tried to use the recovery partition, but every time I try appears a message. Failed to reset your computer. A partition of unity necessary is missing. For that reason I have looking for some information, and with CMD commands like "diskpart". I have noticed that I have 8 volumen.
And in Computer Management appears this.
Then googling recommend to use EaseUS Partition, and some many things change. In the beginning, I had the same 3 partions in red and I don't know what happened.
But in diskpart change too, and I only have 4 volume, and it have dissapeared the recovery partition, and I don't know why?
Before to use EaseUS partition I have created a USB booteable with 9.79gb, and I had this:
But, in this days I have tried to create the USB booteable again, but I can't. And everytime I have tried to run the usb, appears to select the language, the keyboard, and then appears the same windows with troubleshoting and turn off (it returns at the previous windows in blue)
I have made a clean install of Windows 8 using USB and UEFI. Somehow it seems the instalaltion is not quit right of what I have read... Have attached picture of the Diskmanagement (OS is Norwegian by the way).
Compared to this thread: UEFI (Unified Extensible Firmware Interface) - Install Windows 8 with for me something is missing/wrong.
I have a laptop with one SSD and two internal disks. Both internal disk were removed before the installation, and connected and formatted after finished the installation.
It can me mentioned that I downloaded the OS, saved it as .iso file, then copied onto the USB disk. Then connected into the laptop and booted from USB/UEFI.
I did not follow these steps: UEFI Bootable USB Flash Drive - Create in Windows
I bought an acer 756-2808 netbook last year with windows 7 from Amazon. This netbook came with a "upgrade to Windows 8. SoI did the upgrade when it was released.
Sadly, I probably only used netbook for a month or two because the LED screen cracked. They are pretty fragile.
Then, I upgraded to 8GB ram. This thing flies!
I downloaded 'produkey' from nirisoft.net, because I can't find the product key anywhere for the life of me.
So, now I have the product key for the current windows 8 installed. Will this upgrade product key work for a clean install? Moving on, I ordered a Samsung 840 Pro 128 GB which should be arriving in a few days.
Finally, I want to do a clean install of Windows 8.1 using a Windows 8 Product key. Is this possible? The original HDD on this netbook has nothing on it, so I don't really have to back anything up either (like I said I barely used it for two months before the screen cracked!)
I did some searches and found this link: [URL] .....
So if the above step is correct. Do I: 1.) Get the ISO on the USB following the steps mentioned in the link above. 2.) Take out old HDD and install new SSD 3.) Reboot computer with USB 4.) ? 5.) ? 6.) ? etc.
I purchased a Lenovo laptop with Windows 8 Pro preinstalled. It came with 500 GB HDD. I changed the DVD Rom with SSD/HDD tray to use for additional drive. I put an SSD in there and installed Windows 8 on it using a USB Recovery Drive, which I don't have anymore. So my current setup looks like this:
After upgrading to Windows 8.1, the license of some software I'm using got messed up and I couldn't manage fixing it, so the only option I've got left is to reinstall/reset Windows. But since the Recovery partition is on another drive, when I go about creating a Recovery Drive, the option "Copy the recovery partition from the PC to the recovery drive" is greyed out. I've got stuff on my HDD, which I can't currently backup so I don't wan't to format that drive. I'm perfectly fine with formatting the SSD, that's what I want.
How can I reinstall/reset my Windows? The only option I see is to install Windows on the Hard Drive (by doing a backup and formatting it first), and then create a usb recovery drive and reinstall again on the SSD, but that's a lot of hassle and I'd need to find an external hard drive for the backup.
I intentionally left the Hard Drive in the original bay (as Disk 0) because of the better protection against falling compared to the added bay in place of the DVD drive.
I have upgraded my system from windows 7 to windows 8 through digital delivery (no dvd). later it was upgraded to 8.1 pro now its in 8.1 pro with media center. Now i want to do a clean install of windows 8.1 pro with media center but i have no media, i have only windows 8 purchase product key and current product id.
I upgraded to Windows 8 from XP via unlock key without CD, forgetting that it'd be 32bit too.. I'm making a rebuild soon and I think 64bit would really benefit me, apart from some programs I use that are being discontinued in 32bit. A friend of mine recently upgraded to Win 8 too, but he bought the CD. Could I use his CD to overwrite my Win 8 32bit with a 64bit one? And another question: if I could (and I hope I can) is there an option during install to leave some free space for Linux? Having Windows 8 only is not safe ..
I have bought a Dell Inspiron 15R which arrived this week. I have already decided that I am going to install my own copy of Windows 8.1 Professional on to my system.
I have tried this several times now and I keep failing. I am booting from my DVD and the install goes fine. However during install I am normally prompted to enter my Serial for 8.1 and it does not do this. It progresses as though everything is ok, I can format the Hard drive and then it proceeds to install Windows 8.1.
Once fully installed I then go to see if it is activated and to my surprise it is. It has activated with the same Serial as the OEM that came with the laptop.
I have also noticed that this copy of 8.1 cannot join the laptop to my own domain (the options to do this are greyed out) which I am also wanting to do. So this copy of 8.1 is not the copy I am trying to install.
How can I install my own copy of 8.1. I think this is something to do with Dells bios configuration but not sure where to start.
I recently bought a new SSHD for my laptop and after initial problems with trying to install Windows in UEFI, I turned to Legacy and that worked. But now when I change it to UEFI, it just comes up as "Operating system not found".
I have recently purchased Windows 8 Pro Upgrade and for Christmas I will be getting my first SSD.
I want to do a clean install of 8.1 via USB, is this possible with the Windows 8 Pro Upgrade key? I have read through numerous tutorials and think I've got it right but just want some to clarify this will work.
Download the 8.1 ISO Use the generic key to run the installer Setup the PC Open PC Settings Change Product Key enter Win 8 Pro (upgrade) key and activate
Do I then need to do the reg edit and command prompt changes? Regedit - HKEY_LOCAL_MACHINE/Software/Microsoft/Windows/CurrentVersion/Setup/OOBE Command prompt - slmgr /rearm Do I have this right or am I missing something?
Is it possible not to have the partition "recovery"?
Because if you look at the two tutorials:
- UEFI (Unified Extensible Firmware Interface) - Install Windows 7 with - Windows 7 Forums
- UEFI (Unified Extensible Firmware Interface) - Install Windows 8 with
In the tutorial to install Windows 7 in UEFI, there is not that damn partition recovery, while in the tutorial for Windows 8, we can see it.
When I install Windows 7 (MBR mode), I avoid this partition "recovery" by creating a partition with a name before installation. I install the OS on it and everything is fine, no partition "recovery" But here, since one must delete all partitions, If I create a GPT disk with a partitioning tool before installing, is that it might be appropriate?
I was playing around with my OS dual booting them from Windows 8, W7 and XP but I accidentally erased my recovery partition. The bios i have is different from anything I've seen before. To boot from a cd/dvd i had to enable launch csm and secure boot control. Its the asus Q500a laptop. I just wanna know if i can download the recovery partition from somewhere and put it in my hdd.
Ive just done a clean installation of Windows 8. I checked device manager straight away. There was a listing under Other Devices with an exclamation mark listed only as "Media". Ive never seen that before so I havent a clue what it referred to. When I clicked on its properties it said Internal High Definition Audi Bus. Was this a serious issue..maybe a corrupted installation?
I wasn't sure what to do but because I had installed from Windows CD and not factory image I had to go to the Dell site and then install the Intel Chipset software. I then rebooted. The Media icon and exclamation error then disappeared from Device Manager.
Was it the Reboot of my PC that got rid of it or was it the Intel Chipset software being installed that sorted it out? Also what is "Media" referring to or is it just a generic term? Also, Im always confused as to what is the difference between an exclamation mark and the blue question mark on a white background in Device Manager which Ive seen before too?
I am trying to install Windows 8.1 onto a new PC a clean install. I boot from UEFI CD/DVD Drive with the windows 8.1 install disk in it and it gets to the "Press any key to continue" screen, I press a key and it just restarts my computer. Then I try to boot from just regular CD/DVD Drive it says Missing BootMGR.
Right now I have an asus h61-le-CSM motherboard with EFI; it's a little older with a i3 2120 processor. On Friday I'm upgrading to a Gigabyte GA-Z77X-UD5H with a i7 processor.
Right now, I have windows 8 installed. I believe I purchased the upgrade version, although the receipt from microsoft in my e-mail has no mention of the word upgrade, it just says Windows 8 Pro. I am going to want to do a clean install with this stuff which I am capable of doing, however I don't know what I need to do to keep Windows. Will I be ok just re-entering my key?
I recently picked up an Asus laptop, a SDD to replace the the laptop's HDD, and a HDD caddy to hold the HDD in place of the CD/DVD drive. After a fresh Win 8.1 install on the SDD, I made system images of both the SDD and the HDD with the Win 8 OEM install (both stored on external drive). I also created a USB recovery drive and then formatted the HDD.
Fast forward a few weeks... It's last Friday. I'm about to leave for a business trip. I boot up my laptop and a screen comes up telling me to "reboot and select proper boot device". I pull the SDD out, hook it up to my desktop, and see that the drive shows up, but it's blank. A little googling turned up a few reviews from other people with the same issue. On rare occasion, it will wipe itself. Using the USB recovery drive and the Win 8.1 system image, I got things up and running again.
Now for my question, instead of constantly carrying around the 2 USB drives holding the recovery and system image, can I create a recovery partition on my HDD that I can boot too if my SDD wipes again? (Could I copy or clone my Recovery USB to a partition on my HDD?) Then I could just keep the SSD system image on the HDD in case I need to restore it, right?
Disk 0: SDD disk that wiped itself Disk 1: HDD that I'd like to have a recovery partition and system image on
I also have: Win 8 OEM system imageWin 8.1 system imageRecovery USB drive (8.1)Win 8.1 USB Install drive
My son's laptop (Windows 8) failed, and despite F9 options to reset or refresh, and CHKDSK was unable to recover the system due to bad disk sectors. I bought a new disk , but as I had made no recovery media, and the OEM doesn't supply any, I have no way of reinstalling Windows 8.
However I did mange to install Ubuntu Linux on the new disk and the Laptop is now working fine. Out of curiosity I connected the old bad disk via a USB enclosure, and lo and behold Disk utility was able to read the OEM Recovery and Restore partitions. I have made several copies of these on a Win 7 laptop, USB and LInux partitions, and all look good (as far as i can tell).
My issue is that as the OEM recovery partitions seem fine, I reckon they should be installable onto the new disk, but I am at a loss as to how I can use this data to reinstall Win 8 onto my laptop. Most of the advice I can see assumes a working copy of WIn 8 or having a retail Win 8 ISO, which of course I do not have. Remember , unlike Win 7, WIn 8 has no product key identifiable as it is contained in the BIOS somewhere, but I reckon it should recognise the OEM's recovery partition if I only could manage to load it.
I now have a sketchy knowledge of lots of new terms (mounting , partitioning, MBRs, boot sequences etc ) so exactly what to do. [ The tutorial on this form requires a retail win 8 ISO]. I did find a Linux method involcing DD, DDRESCUE , PARTPROBE etc ) which I have tried but all to no avail - I am sure I was close though! ]
I read about how to upgrade from 32 bit to 64 bit with clean install. I have a 32bit win7 on my desktop and a 64 bit Windows 8.1 on my laptop.
My question is can I use the Windows 8.1 laptop do download the upgrade assistant and get Windows 8 64 bit? I don't want to screw up my laptop especially cause it has an OEM Windows 8 that how to reinstall in case of OS breakdown.
In case this is not possible, is there any way to get a 64 bit Windows 8 upgrade downloaded without another 64 bit os already installed?
I have a PC with Win 7 32 bit installed and I want to install a clean Win 8 Pro 64 bit on the machine. Do I have to do a complete reformat before I a can load the Win 8 or will it just do an install of the new operating system?
I purchased a Lenovo Y510P laptop over a month ago which came with Windows 8.0. and I hated it from the get go. I was aware that 8.1 was available as a free download so I downloaded and installed it. All of these updates seem to have bogged down my system. When I click on what I am assuming is the new start button (the white house icon in the taskbar) it takes 6-10 seconds for the menu to appear .
I dug out the key with Belarc advisor and went to MS's site to download an ISO of 8.1 but it told me that it would not let me download the 8.1 ISO since my key was for 8.0. If I were able to get my hands on a 8.1 disc would I be able to use my 8.0 key to do a clean install of 8.1? It is so disappointing to have purchased such a powerful laptop and have it bogged down by so many updates as well as all of the bloatware that came preinstalled on it.