I want to install Windows 8 Pro onto the second partition of my laptop that already has W7 Pro installed. What are the correct settings for the second partition(simple, active, primary,etc) so that the existing System Reserved partition used by W7 won't get clobbered? Is this even possible?
View 3 RepliesI have a custom PC I built and I was running 8.1 on it. I have to drives a 120gb ssd that had windows on it and I have a 1 TB that had the 350mb system reserved partition and 2 other partitions I had for data and a boatload of free space. I wanted to try and install Linux Ubuntu on the 1tb hard drive. I did a custom install on it because I didn't want it to delete my existing partitions so in the install I made 2 partitions for Ubuntu, after I installed it my 2 data partitions are gone and I don't know what happened with the 350mb system reserved partition.
On that disk now is the 2 Linux partitions and a 150mb partition that I can't tell what it is. But now I can't boot into windows, even when I go from bios. My question is in that system reserved partition is that where the bootmgr is? Because I did nothing with the ssd where windows is and I get a no operating system error when I try to boot off it. How I can fix that disk if the system reserved partition isn't on it.
I'm trying to upgrade from Windows 7 to Windows 8 (and then 8.1) on a laptop with a 240 GB SSD. When I run setup, it loads, but then says Windows can't be installed because there isn't enough free space on the system reserved partition. My reserved partition is only 32 MB (I believe it was shrunk from 100 MB when I swapped the SSD in).
Is there any way I can resize the reserved partition and install Windows 8, or will I need to totally reformat the drive and repartition? Don't want to reinstall all my software .....
I'm trying to recreate win 8.1 pro system reserved partition on my ssd. Initially I installed windows on my ssd (c: ) and windows created the sysres partition on my unformatted hd (without telling me anything). After some trouble I managed to be able to boot from ssd directly without going through the sysres partition on the hd. Now if possible I'd like to recreate the sysres on the ssd (by disconnecting my hd so that windows has no other options than creating this on the ssd). If a try a system refresh it tells me it would wipe away all my user installed apps.
View 4 Replies View Relatedim using acer aspire p3, and wish to install a clean Windows 8 cause the hard disk capacity just 58gb and system take around 30gb.
i try to install Windows 8 wif a usb drive inside window, but it seems giving me error: we count install Windows 8 to your pc
then i try to boot wif usb, and i found tat i cant install too because the main partition is oem reserved, any i dea i can install a new clean window?
I used to have System Reserved on separate partion to C: but on my last fresh re-install, I decided to make C: and System Reserved in one partition. Here's what shows on Disk Management:
My question is, which is better. System Reserved on the same partition with C: or on a separate partition?
From many days i was trying to make backup but i was not able to make than i found that my Master File Table it corrupt which located in System Reserved.
Than i thought of Re-Installing Windows than i Formatted System Reserved Drive & My C Drive.Now I am not even able to Install Windows.
Error Shown by the Windows Setup - Setup was unable to create a new system partition or locate an existing system partition.
I have my system reserved partition attached with my personal partition and i have a lot of useful data in it.
Because of it i'm not able to format system reserved at start to avoid boot loader asking me wether you want to choose between windows 8 or the earlier version of windows.
How can I seperate system reserved from my partition .
System reserved is attached with My folder (G)
My disk management look like this.
Windows 8.1 reserved partition will not optimize on SSD. Even if you try to run it manually. Have the latest firmware update for the SSD and Trim in enabled.
Image attached.
Install 8.1 Pro over email, he gets to the HDD selection screen in setup, deletes the old Windows 7 partition, deletes the old 100MB System Reserved partition, creates a new partition as normal
At this point it should have asked him to allow setup to create a new 350MB system reserved partition, but no, it just automatically began installing 8.1
I told him, let it complete install, then check disk management to see if it has created the 350MB partition and this is the screenshot he sent me
why his storage drive is Dynamic, could this be why there was no system reserved partition created on the main drive?
Last night clean installed windows 7 pro and noticed that system reserved partition is created with 100MB. Then upgrade it to windows 8 pro and finally updated it to windows 8.1 pro.
After complete installation of windows 8.1 pro and noticed in computer management that still system reserved partition is 100MB. whereas if in case i did clean installation of windows 8 pro then system reserved partition will be 350MB.
My HDD capacity is 2TB and i have nearly 1TB of unallocated space. C drive is 200GB
Therefore i would like to increase my system reserved partition from 100MB to 350MB.
How to increase system reserved partition from 100MB to 350MB with step by step ?
What is the advantages of allowing 350MB to system reserved partition in windows 8.1 pro?
I tried restoring my computer using Easeus backup, but an error occurred during the restoration process. I've managed to fix it by doing diskpart /fixmbr and then using the windows dvd automated repair, however, what I ended up with is this:
So there are now two visible drives on my PC - C and Q (system reserved), and it doesn't see the data drive.
What I want to do is to make the data drive visible, and merge the C and Q drives into one (or make Q invisible), if that is possible. So, how do I do that?
So that is a screen shot of my disk management screen. As you can see, disk0 and disk1 both have system reserved partitions on them.
Disk0 is a SSD that I only want Windows, Office, and possibly my video and photo editing software on it.
Disk1 is a 2TB SATA HD that is split into 2 partitions used for programs on 1 and media on the other
Disk2 is a 2TB SATA HD that is used just for Media storage, and I'm thinking about adding a partition for backups
What the 25MB partition is on Disk2. I also don't know why I cannot access the system reserved partition on Disk0, and why there is another system reserved partition on Disk1 that I can explore, and contains the boot folders.
How did this happen in the first place? Is there anyway for me to fix this issue without wiping everything? I have done some searching and found quick fixes but haven't found an explanation as to how this happened in the first place.
I also would like to create repair DVDs and a full system image of my C drive, but have not done either of these before.
I was recently messing around with installing Windows 8 on an external USB 3.0 HDD (NOT a flash drive) (How To Install Windows 7 On USB Flash Drive or External Hard Drive), and found website that showed a method for doing so by way of a "NT6 Fast Installer". I tried many times to get it to work and just when I was about to give up it finally succeeded. I rebooted into the external drive (unplugged my internal HDD) and it finished installing successfully. After booting/logging in for the first time I noticed that performance was near-native to what it would be if you ran it from an internal HDD. Games even ran well. But I noticed that there was only 1 partition and no System Reserved, and it appeared that the boot files were located on the C drive.
So my question is, on a regular 8 installation to an internal HDD, how can you delete System Reserved and move the boot files to the C drive? Is there any advantage in doing so (or disadvantages)? I just figured that with a C drive and a System Reserved that makes 2 primary partitions out of an available 4 being taken up, by having everthing on C you would only have 1 primary partition and 8 would still work. The steps listed at the above website are meant for 7 and Vista, but I tested them to the tee and they worked without modification on 8. I just had to flag the partition as active/bootable before booting into it for the first time, or else it would throw an error. I know alot of people think that it cant be done or is hard to do, but it can. But that's not what I'm trying to prove. It essentially amounts to being almost the same thing, if not exactly the same, as Windows To Go, except that you're installing via an unofficial method since the official installer wont allow installation to a USB HDD.
I have managed to wipe my Windows partition while installing the latest release of Ubuntu (v14.04). I've had my HDD split in two with both Windows 8 (updated to 8.1 Update) and Ubuntu and dual-booted between them for over a year.
During the Ubunut install it informed me that I had a previous version of Ubuntu and would I like to wipe the partition that it occupied and install cleanly. I chose that. It also offered a chance to use free space. Now, why I accepted that I don't know but the definition of free space seems to include any other partitions on the drive and didn't warn of this either!
The upshot is that I now have a 1TB drive with no Windows on it. I've lost all my email, pics etc etc.
I tried using my rescue DVD that I created from within Windows and at 29% I am asked to insert the second disc. I don't have a second disk. I had to force my laptop to power down in order to do anything. In order to get online I ended up installing Ubuntu again and it definitely shows no Windows partition.
I've already ordered a retail copy of Windows 8.1 and I'm hoping that I can install this with no issues on what is effectively a clean drive. Am I correct in that assumption? Is there anything else I can try that might rescue it?
I have a Dell Inspiron 17r SE that is out of warranty so no support from Dell.
Ok so i am trying to install windows 8 X64 onto a different hard drive as windows 7 so i can switch between the two at startup.Ok so my problems started yesterday when trying to install windows 8 onto the Hard Drive i was getting"Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks."To fix this i converted the disk to a GPT disk in Disk ManagerNow im getting the Error "Setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more Information." Here is a screenshot of disk manager at the moment.I am trying to install Windows 8 to Disk 2.
View 9 Replies View RelatedBecause it does not contain enough free space. Clearly I have enough free space... [URL] ....
What should I do? I want to do a dual boot, so I can keep Windows 7 in case I don't like 8.1...
I formatted and deleted that partition and I tried again with 201gb, and no luck. [URL] ....
I was having a problem since my computer shows "windows cannot delete the active system partition on this disk". How to delete the partition on which i have windows 7 installed.
Here is the screen shot ...
I already have windows 8.1 installed in c: partition
I have created new partition ''New Volume :" to install windows server 2008 on it ,but when I try to boot from the CD to install it this message appear
"Windows cannot be installed to this Hard disk space . The partition contain one or more volumes that are not supported for installation" ...
This is screenshot of disk management ...
Here is the deal I have 2 hdds (160 gb and 1 tb) late last night used the 1 tb as a flash drive and re installed my OS on the 160 gb drive. The "system" files are on the 1 tb drive and all other files ( boot crash dump etc ) are on the other one.
PROBLEM: while doing a cold start the system fails to spin up th bigger drive in time for the software to detect the system file on the bigger drive and it brings up the boot manager saying files are not present to load, a restart fixes the problem as the bigger drive would be up to speed by then, any work around to delay the boot till both drives are up to speed .........???.
Further i think that moving the "system partition " to the other disk will eliminate this issue ...... how do i go about doing that ... See the image below
QUESTION :if i remove the 1 tb disk physically and reinstall OS and connect it back will everything be as good as new or will it pose problems as then there would be two "system " partitions .....
While I was messing around with my laptop, I decided to add on a fourth operating system, Arch Linux. I suppose I was pushing my luck a bit . Anyways, during the installation, I accidentally deleted the EFI system partition from my laptop, which contained the Windows Boot Manager and necessary files to boot. Great. I only made things worse by trying to troubleshoot, and broke grub as well.
I have a Windows 8 repair disk I made using the Windows 8 built in utility, but it does not boot: the computer turns on, and just hangs at the Toshiba splash screen.
I also can obviously not access the Toshiba recovery partitions, as they are booted into just like Windows itself.
I found a bootx64.efi file on one of my system's recovery partitions (Toshiba seems to have some really complex system going on) and placed it in EFIootootx64.efi. According to this site, FGA: The EFI boot process., I need to place the bkpbootmgfw.efi (on my system, that was what it was called, but I suspect boot-repair (ubuntu tool) messed something up when I was first setting up grub and the ESP and the bkp stands for backup) back onto the EFI System Partition.
Where to look for in the various Windows Imaging Format .wim and .swm files I have laying around my recovery partition(s) in order to extract the necessary EFI files. Any Windows Repair iso that works.
I am dual booting my dell e6420, 8 gb ram. I have windows 8 on my HD and windows 8 on my ssd. Since I do live audio work, I keep the ssd system super clean. It doesn't get on the net, etc.
Recently windows prompted me to upgrade my hd os from 8 to 8.1, which I did. Since then, every few minutes, I get a popup saying I have Low disk space on my system reserved partition. It's 300 mb, which seems larger than most, but there is indeed only 1 mb free. But of course when I run disk cleanup, there is nothing that can be deleted!
It's now popping up about every 2 minutes. Very annoying.
I have 2 os's, do I even need the srp? But why on earth would it run out of memory? Maybe because of the dual boot? But I'd think they'd account for that.
should I expand the volume? That just seemed a little dangerous, and hopefully unnecessary.
I have win 8 pro installed & two HDDs with two partions each , I want to migrate the boot partition to another partition on the second drive .
It would have been easier if i would have just cloned the complete drives but one of the partions on the 2nd drive has data which cannot be deleted .
So I have Drive
1 - Partitions C: ( boot partition ) & D:
Drive 2 - Partitions E: & F:
I want to remove Drive 1 from my PC so i want to copy C: to E: then remove drive 1 & boot from E:
I tried "Easeus todo backup" , did not work, it does not make the copy bootable , to make it bootale the whole drive has to be copied .
I tried making an image of C: using Windows 8 inbuilt backup feature then removed drive 1 , installed Windows 8 on E: then tried restoring the image of C: but i got some error.
My Inspiron 7520 laptop arrived today and I've been trying to get the various Intel features to work on it. I've got the rapid storage (ssd cache drive) set up but I think I may have broken the rapid start feature of it along the way. Now when I start the laptop I get an error saying 'your system does not appear to have intel rapid start enabled'. When entering my BIOS, the intel Rapid Start Technology is greyed out and I can't click it.
I thought it may have been because i set all available space on my SSD to the rapid storage feature. So I changed it and made it so that it only takes about 20gb (of the 32gb) and tried to follow the intel guide of setting up the rapid start feature [URL] ....., however I received an error on the part where it said 'setid=84 override' which said my partition it was not of the right type or format. So after reading another guide online it said to try using the partition type of MSR instead of Primary. So I tried that and now the partition is hidden from disk management and I can't seem to delete it from diskpart either.
I migrated my hard drive using Paragon which was running Windows 8 a few days ago from my 500GB to my 3TB hard drive. It worked fine for a while however it's now been acting up recently. I noticed that the system reserved partition on my new hard disc (G: ) is only "Active, Primary Partition" and I still have a system reserved partition on my old hard disc (E: ) which is "System, Active, Primary Partition" so I'm guessing it's still somehow tied to my OS (even though I formatted my old hard disc as I want to set up a dual-boot system with Linux Mint), and the fact that whenever I start up my computer it says it's repairing E:.
What to do to make it so the system reserved G: partition is the "System, Active, Primary Partition" and how I can merge/format the E: and F: partitions on my old hard drive after?
I know the little mistake I made with the 3TB drive only being recognised as 2TB.
I have installed dual windows 8 and windows 7 . i did this many times but this time when i open my computer to explore disks then i saw system reserved disk too there? this was never happened to me . so at what condition this happens and is it the fault of the pc .? should i re install windows to avoid this? does it harm my pc if it remains there ?
View 9 Replies View RelatedI bought SSD and I want to install windows 8.1 there.
I have HDD which runs windows XP. I have no usb, no ODD.
I think I have to boot a setup file instead of windows XP but I don't know how to do it.
I have 16GB of unallocated space in front of System Reserved. I was wondering if there is a way to move the System Reserved to the front. I've used GParted before and I'm guessing I am going to have to make a backup of the C drive and then move it around. (and I know, only 10MB free on C drive. )
View 1 Replies View RelatedIs it possible to install Windows 8.1 as Legacy with MBR? Or only as UEFI with GPT? I'm kind of confused with all this UEFI business, I always used MBR in my Windows installations. Also, Truecrypt does not support UEFI, so if installing Windows 8.1 I should do it as legacy.
Also, how can I control during the install process if I want to set my system installation as UEFI or Legacy?
I have just had limited success installing Ubuntu 12.10 onto an external diskon my new Samsung (series 3) Windows 8 laptop.
The secure boot and fast start up have been disabled.
The situation now is that Windows or Ubuntu will not boot up after pressing the power button, when doing this I get a dark screen with the following message:
error: no such device: 6dada016-95df-4ef5-a343-4a77e8afd396
grub rescue >_
I can now only boot up either program by hitting the F10 key directly afterpressing the power button, I then have to select one of the options in the boot options before themachine will boot (both systems boot up as normal when following this option).
if the external drive is not plugged into the USB port I want mylaptop to boot directly into Windows 8. Can this be achieved?. I would like to start Ubuntu through the settings, change PC settings option.
I wonder if i could hook up my new Kingston SSDNOW W300 120Gb ssd to my main computer with windows 8 ( Crappy 1Tb Seagate SSHD ) And install linux on the ssd. So when me and my friends motherboard finaly arrive i will be able to just hook up the ssd and go right into linux?
Also I want to be able to temporarily play around in linux with the main computer ( Boot into linux instead of win 8. ) to play around and install the things i want.