Trying to create an ISO of the windows 8.1 dvd. I want to make a bootable USB stick when I go to install it to speed things up and make a backup copy. I can create the ISO using Alcohol 120 but when I use the Windows 7 USB/DVD tool to open the ISO it says it is not a valid ISO file.
Every other bit of software can read it okay so it is an ISO file as far as I can tell.
I'm trying to recreate win 8.1 pro system reserved partition on my ssd. Initially I installed windows on my ssd (c: ) and windows created the sysres partition on my unformatted hd (without telling me anything). After some trouble I managed to be able to boot from ssd directly without going through the sysres partition on the hd. Now if possible I'd like to recreate the sysres on the ssd (by disconnecting my hd so that windows has no other options than creating this on the ssd). If a try a system refresh it tells me it would wipe away all my user installed apps.
I have a Windows 8 pro oem copy and I want to create a bootable Windows 8.1 pro Usb stick in uefi format to do a clean install.
Now I built my machine myself so I am sure there is no embedded windows key in the bios? But I cant seem to download anything that will create the media, it says it my key wont work in a retail copy of windows 8.
I already have a Windows 8 Pro USB installer setup but I don't think it can be used to do a repair install for my Windows 8.1 Pro upgrade. So I'm trying to create a new USB installer setup specifically for Win 8.1 Pro. However, the Windows 8.1 setup window is not accepting the 8.1 Product Key that I extracted from Belarc, ProduKey and WPkey. Is there a way to get around that issue so that I can create the Win 8.1 USB installer?
I recently picked up an Asus laptop, a SDD to replace the the laptop's HDD, and a HDD caddy to hold the HDD in place of the CD/DVD drive. After a fresh Win 8.1 install on the SDD, I made system images of both the SDD and the HDD with the Win 8 OEM install (both stored on external drive). I also created a USB recovery drive and then formatted the HDD.
Fast forward a few weeks... It's last Friday. I'm about to leave for a business trip. I boot up my laptop and a screen comes up telling me to "reboot and select proper boot device". I pull the SDD out, hook it up to my desktop, and see that the drive shows up, but it's blank. A little googling turned up a few reviews from other people with the same issue. On rare occasion, it will wipe itself. Using the USB recovery drive and the Win 8.1 system image, I got things up and running again.
Now for my question, instead of constantly carrying around the 2 USB drives holding the recovery and system image, can I create a recovery partition on my HDD that I can boot too if my SDD wipes again? (Could I copy or clone my Recovery USB to a partition on my HDD?) Then I could just keep the SSD system image on the HDD in case I need to restore it, right?
Disk 0: SDD disk that wiped itself Disk 1: HDD that I'd like to have a recovery partition and system image on
I also have: Win 8 OEM system imageWin 8.1 system imageRecovery USB drive (8.1)Win 8.1 USB Install drive
Why windows 7 and windows 8 introduced a limitation when using Disk Management, and is NOT possible to create more than 3 Primary Partitions? However, using DiskPart from command line it is VERY possible, no warnings or notices.
Code: C:Windowssystem32>diskpartMicrosoft DiskPart version 6.3.9600Copyright (C) 1999-2013 Microsoft Corporation.On computer: PAINKILLERDISKPART> listMicrosoft DiskPart version 6.3.9600DISK [code]....
As far as I know, there is a maximum of 4 Primary partitions on a hardisk, or 3 primary and one extended, and IN the extended partitions more that 4 logical drivers.However, from any disk utility like the old, deprecated, and buggy Partition Magic, acronis disk partition utility, gparted Linux, parted, cfdisk, fdisk, or even on the older Windows like Xp, nt, 2000, 98, me, ms-dos, freedos, I WAS ALWAYS BEEN ABLE TO CREATE 4 PRIMARY PARTITIONS, but with the new WINDOWS 7 and the new WINDOWS 8, it appears this limitation of only 3 PRIMARY PARTITIONS instead of 4. Don't know about Vista as I have skipped that version of windows on every PC that I have build or worked.
Or is working like this because of some hidden reason which I can't figure out by myself what could It be, and the only thing that I can observe is that while technology is evolving (hardware and software), we have limitations like this, to create only 3 primary instead of 4 primary while using Disk Management from administrative tools or right clicking on the computer and "manage" console.
Personally I am a little irritated/annoyed that now the disk management is having "handicap" and I can NOT find a serious reason for this idiocratic limitation. As we are "evolving" the normal path It would be more normal to be able to use more that 4 primary on a hardisk, from my point of view, not limiting to ONLY 3 Primary.
I have sony vpceh3aen laptop with windows 7 home basic. I have IOS file of embedded windows 8.1 industry pro with update via dreamspark.com. just now I run windows 8.1 upgrade assistance and its says "your pc's firmware doesn't support secure boot so you won't be able to use it in windows 8.1". Some persons says that not a problem. I not like to upgrade my OS but I want create dual boot with windows 7 home basic and embedded windows 8.1 industry pro. my questions:
1. can I possible to dual boot? if possible how to create it and what are changes(in BIOS and windows 7 settings) needs to make in my laptop?
2. I have pen drive and DVD, which is best for create dual boot with IOS file?
3. I have 100GB free logical partition. that is enough for embedded windows 8? if not how much need to increase?
Ok so i am trying to install windows 8 X64 onto a different hard drive as windows 7 so i can switch between the two at startup.Ok so my problems started yesterday when trying to install windows 8 onto the Hard Drive i was getting"Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks."To fix this i converted the disk to a GPT disk in Disk ManagerNow im getting the Error "Setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more Information." Here is a screenshot of disk manager at the moment.I am trying to install Windows 8 to Disk 2.
I'm trying to get my existing installation of windows to boot as an external hard drive. I had it installed on an internal drive, then removed the hard drive and put it in an external enclosure. Then trying to boot off the drive results in windows loading the recovery screen and giving me a bunch of options. The only thing I can do is restart the computer with all the other options (refresh, reinstall) saying that the drive is locked. Putting the drive back into the computer will allow me to boot normally from it, but I want to be able to boot from it via USB 3.
What can I do to either create a fresh install of windows on this drive that can be booted by usb or migrate/modify my existing installation to work.
I wanted to remove the hidden recovery parition on my Asus Zenbook UX31A, which is 20GB in size, and I need that space, because the laptop just has a 128GB SSD, and I am permanently on space limit of about 1-2GB and Windows isn't working anymore properly.
when I open the Windows 8 recovery tool, the option for copying the recovery partition is greyed out. I googled for this, and I just could find informations about, that this can happen, but not why, and how to solve it.
I have a new Asus X102BA it has modest performance so as I have a spare OCZ 120GB ssd I thought I would see if it could be improved. I have tried to install win 8 Pro using a powered DVD drive but I get the message in my title. The primary partition is shown on screen and I have nothing but the DVD drive plugged into the computer...
Brand new laptop. HP. 17e UEFI +GPT etc. Upgraded to 8.1 from 8, first thing. Then clicked on the MS, create recovery. (in blind hope of a clean 8.1 restore). Inserted (32gb stick) (later found out is illegal windows 8 version, that is not removable.) SD-extreme, 32gb. list on toms HW, as winner of all, (and is useless for this app).
So I pull out my very old SD cruiser glide, 32gb (old , slow and not win 8 cert (a good thing). Yes all 32gb extremes are mapped as HDD not removable media and is doomed. (known on all forums) but same error.
The cruiser shows up i device manager under removable media....btw i want to find out why the missing files error. I have a HDD and SSD, with latter mirrored. both the orig, HDD fails and SSD fails. same way. I parked the HDD , and run only SSD. but both fail... (my guess is , upgrades 8.0 to windows 8.1 is cause).
now the screen, attached
How can i find the log of these errors, it's not in event viewer.. oddly. sfc/ scannow works. as does chkdsk, and restore (create) works,. and system is Fast a lightning. All HP apps works, cept there version of create disk for same reasons.
My HP create recovery now works on the GLIDE. (old very old 32gb stick i had laying about). So now I am thinking HP? blocks the MS create so you will use theirs? But I'd lilke to know this, what files are missing....
I installed Windows 8/8.1 on a system with a Gigabyte GA-Z77X-UD5H MB. When I look at the SSD where Windows is installed I have one partition. I also installed Windows 8/8.1 on an ASRock Z77 OC Formula MB. When I look at the SSD where Windows is installed I have three partitions - 300MB (Recovery Partition), 100MB (EFI System Partition) and 111.27GB (Boot,....Partition). Why did the Windows 8 installer create three partitions on the ASRock system? I think I understand the EFI partition since the ASRock BIOS has a "Load UEFI Defaults" option. The Gigabyte MB does not have this option in the BIOS? Is that because the ASRock MB has truly implemented EFI and uses the EFI System Partition to store boot information?
Why was the Recovery Partition created? I built this system from scratch so there is not any third party involvement. If I reinstall Windows 8 using a new - never used SSD will I get the three partitions? If I format the SSD with one partition prior to Installing Windows 8 what will I get?
I not concerned about the loss of 300MB,why I got different partition configurations on fresh installs of Windows 8 on two different MB's/Systems?
I am having problems installing UEFI & a Error 0x80004005 with Windows 8.1 OEM saying it can't create partitions for UEFI then creating 2 partitions for MBR installation instead. This using a 400 TB, hard drive, setup with a GPT system & nothing else & ready for Windows 8.1 to create the partitions.
The first time it happened I used MiniTool Partition Wizard Professional, to delete the partitions created by Windows 8.1 & convert the MBR to GPT, then used Wipe Disk function to erase all data and set all the bits to a 1.
The only thing that I can think is upsetting the installation is that I have left the other drives in the system including 1x3 TB drive, 1x2 TB drive and a second 4 TB drive.
The 2 TB drive has "Win 7 Ultimate" installed using MBR, the 3 TB drive is empty but ready to install Windows 8.1 setup with GPT, and the other 4 TB drive has a UEFI Windows 8.1 installed but broken.
I have also tried to install UEFI Win 8.1 on the 3 TB drive but it failed with the same error code as above.
This UEFI takes a lot to get ones head around dose't it, and me being much older than I once was makes it even harder. I have tried this installation at least 3 to 4 times now and doing these "Wipe Disk Functions" every time has so far lost me 3 whole days just in wasted time.
I got two laptops today, one with Windows 7 and the other with Windows 8, both 64-bit machines.
I don't have a windows 8 dvd around and I don't have the internet to download a windows 8 .iso image.
All I have is a USB stick. I'm not sure how creating a system image works but from the last article I read, both computers must have equal disk size or larger and the destination disk of the laptop for the process is a tad smaller than the source partition.
I was wondering if there was a way to create a x64 setup executable in a pre-bult Win 8 AIO (containing both x32 x64). I am also aware that the maker of the AIO used x32 to increase compatibility between x64 and x32 computers.
I was installing Windows 8 at my desktop pc.Suddenly power cut occured and it caused the compute to shut down.Then when I restarted my pc again a messege appeared saying that the installation has been corrupted and it can't be continued and it doesn't log on.After that when I tried to re-install Windows 8 the setup got stuck at the "setup is starting" window.I waited overnight for it to go and the installation to start.But it doesn't happen.I have tried to re-install several times but the same problen happens again and again.So neither I can log into my computer now nor I can re-install windows.I don't know what to do.
Here's my issue; I am a math and science teacher in a public middle school and am outfitting my class with thirty brand-new Lenovo touch computers. I consider myself above-average savvy with computers, having worked with every version of Windows extensively since the late 80s and DOS. The only OS that I haven't spent much time on is Windows 8.
These computers are all brand-new and of course have legal copies of Windows 8 -- irritatingly, though not yet updated to 8.1. Soo...It took me a larger part of one day just to get ONE of these computers ready for class use. It involved several stages of the Windows update/reboot dance, followed by removing myriad unneeded bloatware applications, setting up multiple child accounts on the machine, and finally installing some freeware educational materials needed for instruction. It was all unbelievably tedious!
I turned around and look at all the remaining twenty-nine computers with dread. Obviously I'm trying to work out some kind of shortcut to avoid having to spend my whole summer updating each of the new machines individually. In an ideal world, I would make some sort of image of the machine that I just spent several hours updating/configuring, and then replicate that across the other twenty-nine. In terms of hardware, this shouldn't be a problem since all of the machines are exactly the same make and model. But I anticipate other problems such as, for example, the serial number of the Windows version and the computer name will then be the same on all the machines and have to be adjusted. There very well could be other issues with replicated serial numbers, etc.
I'm thinking maybe I just have to bite the bullet and work at each individual computer one of the time. And then image them individually so that when the kids mess around with them, I can do an easy restore. How I could make this work?
I have a HP Envy 4 Ultrabook and I want to install Windows 8 from scratch, I put the installation files on a flash drive from a DVD of Win 8 I had, but when I go to install it, it says the "We couldn't find any drives". I have tried using DiskPart within the CMD as well, but it only finds my flash drive when I run list disk. Also, my drives are completely formatted, and I accidentally wiped the recovery partition. I tried with a USB of Win 8 Pro, and it was fine, showing all of my drives correctly, but that version is linked to another PC, so I can't install it. Also, I booted into a Linux Mint live CD and tried to install it, it sees my hard drive correctly, but the Windows install does not, I can't figure this out, never encountered it before. Is Linux my only option at this point?
I get as far as " a driver is needed to continue installation" not found, make sure its on the right media. Here is what i got done on my own..
1- BIOS setting "legacy" and U E F I" boot from USB. 2- F 9 to choose boot order.. selected USB device 3- Installation starts for WIN 7 4- Driver is needed to continue, and i have no clue what it is..some one pointed me to . f 6 f l p y-x 64 because its an HP Envy... 5- Driver not found / wrong driver.. 6- Shut down restart.......................
My DVD is Windows 7 ultimate X 32, X 64..
No matter what i cant boot form my USB /U E Fl /WIN 7 pen drive.seems like its not recognized or drivers for the USB chip set not installed.. Of course using the O E M DVD of win 7 fails. because of the G P T style.
I am trying to upgrade from windows 8 pro to windows 8.1 on a samsung laptop. The download completes and installation starts.
After a while the following message appears "you cant install windows on a usb flash drive with setup"
I am not actually trying to install to a flash drive. I contacted Microsoft and after 5 hours they said that I should connect to the internet with a cable and not by wireless in order to solve the problem (this didn't work of course and I had told them that it was an install problem and not a download problem).
Until very recently i was running Windows 8 with a 240 GB Sandisk SSD as a primary and a 2 TB Western Digital Green HDD as a storage. I decided to set up a RAID 1 setup so i purchased a second 2 TB HDD and installed it.
My intent was to run windows 8 off the 240 SSD as a primary and have a RAID 1 setup for my 2TB HDDs.
I learnt that my data configuration was set to AHCI. I decided to do a complete clean install and change the sata configuration in BIOS to RAID.
After successfully creating a RAID volume using my 2TB HDDs i proceeded to install Windows off my primary. I am however having difficulties in that it will not allow me to install windows on either drive.