I was wondering if there was a way to create a x64 setup executable in a pre-bult Win 8 AIO (containing both x32 x64). I am also aware that the maker of the AIO used x32 to increase compatibility between x64 and x32 computers.
View 9 RepliesAlright, so my ASUS laptop has been getting a little slow lately, so I decided to reinstall. Now I know my PC has an ASUS recovery partition, which reinstall the pc with all the tools, drivers etc, since I've used it before. But now when I restart the computer and press F9 and reset, it doesn't work. This is what I do:
This is where it was supposed to give me the option to restore whole drive or just install windows to the primary partition. But now it asks for a CD, which I don't have. This PC never used to have a recovery CD, just a recovery partition.
Then, I read somewhere I could do the same from inside Windows 8, so I tried that as well by going to the charms bar, then Settings and then "Change PC settings". Then I selected "Update and recovery" from the left, and then went to Recovery, where I pressed the button to remove everything and reinstall windows. This is what I got:
So, I tried to see if EaseUs Partition manager showed the recovery partition. I started ASUS and these are the partitions it found:
I saw it found both a "Recovery" partition and a "Restore" partition. Now I assume the Recovery partition is the one Windows 8 boots into, and the Restore partition is the one created by ASUS. So, these are the contents of the Recovery partition:
And these are the contents of the Restore partition:
As you can see outlined in red, it does contain an install.wim file, so I know the recovery data is there. However the Windows 8 recovery environment just isn't able to find it.
My computer won't download programs or run executable. I restored to the earliest point it showed, 12/7, but no luck. I turned off firewall; nothing. Chrome only runs with reduced screen resolution. What's corrupted?
View 1 Replies View RelatedI'm now running the windows 8 64 bit OS, and logged by a Microsoft account.
Now I am doing some work using Visual Studio and encouter some problems about the PATH variable.
1. Under current Microsoft account, I cannot see the full PATH variable neither in CMD or the Environment Variables dialog, the figures below shows the current view:
This is my current PATH
and, of course, I set it under system variables.
Well, this path works fine in command line executing, but in visual studio, it doesn't work.
2. So, lets see what I have in visual studio (run as administrator):
Code:
System.Environment.GetEnvironmentVariable("path");
"C:Windowssystem32;C:Windows;C:WindowsSystem32Wbem;C:WindowsSystem32
WindowsPowerShellv1.0;C:Program FilesMicrosoft SQL Server110ToolsBinn;
C:Program Files (x86)Microsoft SQL Server110ToolsBinn;C:Program
[Code]....
If you're willing to look at the text above, you'll find that this "PATH" is totally different with the one we set in Environment Variables dialog or get from the CMD.
I want to use some executable files in "d:commonin" with my web application hosted by IIS8, but I found that the web application could not find the executable files in "d:commonin", which should exist in "PATH"
Well, though I can just put the executable files into system32,
I fire up my laptop last night and install the patch Tuesday fixes. Afterwards I go to start Outlook 13; I click the tile and nothing happens. I say heck with it for the night, I still have Outlook 10 installed so I start that to get through the night. This morning I root around to see what is going on. I take a look in the program files directory and see that outlook.exe (along with a ton of other executable and dll's) have been renamed to outlook.exe.bak.
If you wonder why I have both 10 and 13 installed, that is how the '13 install left it. I purchased 10 late in its life and got the free upgrade to 13. When I installed 13 it left 10 out there.
Anyway, here's a screen shot.
I've got a new Windows 8.1 laptop, and I've been installing the usual suspects. Most of these work, but I have had trouble with two:
dropboxinstaller.exe
chromesetup.exe
With both of these, upon running I don't even get the warning asking whether I want to allow the file to modify my computer. All that happens is that the cursor flicks to the "waiting" blue circle for a second or two, then... nothing.
Trying to create an ISO of the windows 8.1 dvd. I want to make a bootable USB stick when I go to install it to speed things up and make a backup copy. I can create the ISO using Alcohol 120 but when I use the Windows 7 USB/DVD tool to open the ISO it says it is not a valid ISO file.
Every other bit of software can read it okay so it is an ISO file as far as I can tell.
I have a Windows 8 pro oem copy and I want to create a bootable Windows 8.1 pro Usb stick in uefi format to do a clean install.
Now I built my machine myself so I am sure there is no embedded windows key in the bios? But I cant seem to download anything that will create the media, it says it my key wont work in a retail copy of windows 8.
I like to use the desktop on my laptop rather than the tiles. I had no problem putting the browser on the desktop, but am a loss for putting the mail program there; there doesn't seem to be an executable file in the mail directory.
View 6 Replies View RelatedI already have a Windows 8 Pro USB installer setup but I don't think it can be used to do a repair install for my Windows 8.1 Pro upgrade. So I'm trying to create a new USB installer setup specifically for Win 8.1 Pro. However, the Windows 8.1 setup window is not accepting the 8.1 Product Key that I extracted from Belarc, ProduKey and WPkey. Is there a way to get around that issue so that I can create the Win 8.1 USB installer?
View 3 Replies View RelatedI recently picked up an Asus laptop, a SDD to replace the the laptop's HDD, and a HDD caddy to hold the HDD in place of the CD/DVD drive. After a fresh Win 8.1 install on the SDD, I made system images of both the SDD and the HDD with the Win 8 OEM install (both stored on external drive). I also created a USB recovery drive and then formatted the HDD.
Fast forward a few weeks... It's last Friday. I'm about to leave for a business trip. I boot up my laptop and a screen comes up telling me to "reboot and select proper boot device". I pull the SDD out, hook it up to my desktop, and see that the drive shows up, but it's blank. A little googling turned up a few reviews from other people with the same issue. On rare occasion, it will wipe itself. Using the USB recovery drive and the Win 8.1 system image, I got things up and running again.
Now for my question, instead of constantly carrying around the 2 USB drives holding the recovery and system image, can I create a recovery partition on my HDD that I can boot too if my SDD wipes again? (Could I copy or clone my Recovery USB to a partition on my HDD?) Then I could just keep the SSD system image on the HDD in case I need to restore it, right?
Disk 0: SDD disk that wiped itself
Disk 1: HDD that I'd like to have a recovery partition and system image on
I also have: Win 8 OEM system imageWin 8.1 system imageRecovery USB drive (8.1)Win 8.1 USB Install drive
Why windows 7 and windows 8 introduced a limitation when using Disk Management, and is NOT possible to create more than 3 Primary Partitions? However, using DiskPart from command line it is VERY possible, no warnings or notices.
Code: C:Windowssystem32>diskpartMicrosoft DiskPart version 6.3.9600Copyright (C) 1999-2013 Microsoft Corporation.On computer: PAINKILLERDISKPART> listMicrosoft DiskPart version 6.3.9600DISK [code]....
As far as I know, there is a maximum of 4 Primary partitions on a hardisk, or 3 primary and one extended, and IN the extended partitions more that 4 logical drivers.However, from any disk utility like the old, deprecated, and buggy Partition Magic, acronis disk partition utility, gparted Linux, parted, cfdisk, fdisk, or even on the older Windows like Xp, nt, 2000, 98, me, ms-dos, freedos, I WAS ALWAYS BEEN ABLE TO CREATE 4 PRIMARY PARTITIONS, but with the new WINDOWS 7 and the new WINDOWS 8, it appears this limitation of only 3 PRIMARY PARTITIONS instead of 4. Don't know about Vista as I have skipped that version of windows on every PC that I have build or worked.
Or is working like this because of some hidden reason which I can't figure out by myself what could It be, and the only thing that I can observe is that while technology is evolving (hardware and software), we have limitations like this, to create only 3 primary instead of 4 primary while using Disk Management from administrative tools or right clicking on the computer and "manage" console.
Personally I am a little irritated/annoyed that now the disk management is having "handicap" and I can NOT find a serious reason for this idiocratic limitation. As we are "evolving" the normal path It would be more normal to be able to use more that 4 primary on a hardisk, from my point of view, not limiting to ONLY 3 Primary.
I have sony vpceh3aen laptop with windows 7 home basic. I have IOS file of embedded windows 8.1 industry pro with update via dreamspark.com. just now I run windows 8.1 upgrade assistance and its says "your pc's firmware doesn't support secure boot so you won't be able to use it in windows 8.1". Some persons says that not a problem. I not like to upgrade my OS but I want create dual boot with windows 7 home basic and embedded windows 8.1 industry pro.
my questions:
1. can I possible to dual boot? if possible how to create it and what are changes(in BIOS and windows 7 settings) needs to make in my laptop?
2. I have pen drive and DVD, which is best for create dual boot with IOS file?
3. I have 100GB free logical partition. that is enough for embedded windows 8? if not how much need to increase?
I don't know what Windows 8.1 has done to my system but after getting rid of it and re-installing Windows 8 ENTERPRISE again I cannot create Windows to GO any more
It doesn't matter if I plug in an SSD, a standard USB stick or a standard external USB HDD - I get No suitable devices found when launching the application from the control panel.
(I can do it manually the old fashioned way but I don't know why the standard method is broken when it was working perfectly before).
Ok so i am trying to install windows 8 X64 onto a different hard drive as windows 7 so i can switch between the two at startup.Ok so my problems started yesterday when trying to install windows 8 onto the Hard Drive i was getting"Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks."To fix this i converted the disk to a GPT disk in Disk ManagerNow im getting the Error "Setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more Information." Here is a screenshot of disk manager at the moment.I am trying to install Windows 8 to Disk 2.
View 9 Replies View RelatedIs it possible to create restore discs that return the PC back to factory state (just out of box, never turned on)?
View 6 Replies View RelatedI'm trying to get my existing installation of windows to boot as an external hard drive. I had it installed on an internal drive, then removed the hard drive and put it in an external enclosure. Then trying to boot off the drive results in windows loading the recovery screen and giving me a bunch of options. The only thing I can do is restart the computer with all the other options (refresh, reinstall) saying that the drive is locked. Putting the drive back into the computer will allow me to boot normally from it, but I want to be able to boot from it via USB 3.
What can I do to either create a fresh install of windows on this drive that can be booted by usb or migrate/modify my existing installation to work.
I wanted to remove the hidden recovery parition on my Asus Zenbook UX31A, which is 20GB in size, and I need that space, because the laptop just has a 128GB SSD, and I am permanently on space limit of about 1-2GB and Windows isn't working anymore properly.
when I open the Windows 8 recovery tool, the option for copying the recovery partition is greyed out. I googled for this, and I just could find informations about, that this can happen, but not why, and how to solve it.
I have a new Asus X102BA it has modest performance so as I have a spare OCZ 120GB ssd I thought I would see if it could be improved. I have tried to install win 8 Pro using a powered DVD drive but I get the message in my title. The primary partition is shown on screen and I have nothing but the DVD drive plugged into the computer...
View 5 Replies View RelatedBrand new laptop. HP. 17e UEFI +GPT etc. Upgraded to 8.1 from 8, first thing. Then clicked on the MS, create recovery. (in blind hope of a clean 8.1 restore). Inserted (32gb stick) (later found out is illegal windows 8 version, that is not removable.) SD-extreme, 32gb. list on toms HW, as winner of all, (and is useless for this app).
So I pull out my very old SD cruiser glide, 32gb (old , slow and not win 8 cert (a good thing). Yes all 32gb extremes are mapped as HDD not removable media and is doomed. (known on all forums) but same error.
The cruiser shows up i device manager under removable media....btw i want to find out why the missing files error. I have a HDD and SSD, with latter mirrored. both the orig, HDD fails and SSD fails. same way. I parked the HDD , and run only SSD. but both fail... (my guess is , upgrades 8.0 to windows 8.1 is cause).
now the screen,
attached
How can i find the log of these errors, it's not in event viewer.. oddly. sfc/ scannow works. as does chkdsk, and restore (create) works,. and system is Fast a lightning. All HP apps works, cept there version of create disk for same reasons.
My HP create recovery now works on the GLIDE. (old very old 32gb stick i had laying about). So now I am thinking HP? blocks the MS create so you will use theirs? But I'd lilke to know this, what files are missing....
I installed Windows 8/8.1 on a system with a Gigabyte GA-Z77X-UD5H MB. When I look at the SSD where Windows is installed I have one partition. I also installed Windows 8/8.1 on an ASRock Z77 OC Formula MB. When I look at the SSD where Windows is installed I have three partitions - 300MB (Recovery Partition), 100MB (EFI System Partition) and 111.27GB (Boot,....Partition). Why did the Windows 8 installer create three partitions on the ASRock system? I think I understand the EFI partition since the ASRock BIOS has a "Load UEFI Defaults" option. The Gigabyte MB does not have this option in the BIOS? Is that because the ASRock MB has truly implemented EFI and uses the EFI System Partition to store boot information?
Why was the Recovery Partition created? I built this system from scratch so there is not any third party involvement. If I reinstall Windows 8 using a new - never used SSD will I get the three partitions? If I format the SSD with one partition prior to Installing Windows 8 what will I get?
I not concerned about the loss of 300MB,why I got different partition configurations on fresh installs of Windows 8 on two different MB's/Systems?
I am having problems installing UEFI & a Error 0x80004005 with Windows 8.1 OEM saying it can't create partitions for UEFI then creating 2 partitions for MBR installation instead. This using a 400 TB, hard drive, setup with a GPT system & nothing else & ready for Windows 8.1 to create the partitions.
The first time it happened I used MiniTool Partition Wizard Professional, to delete the partitions created by Windows 8.1 & convert the MBR to GPT, then used Wipe Disk function to erase all data and set all the bits to a 1.
The only thing that I can think is upsetting the installation is that I have left the other drives in the system including 1x3 TB drive, 1x2 TB drive and a second 4 TB drive.
The 2 TB drive has "Win 7 Ultimate" installed using MBR, the 3 TB drive is empty but ready to install Windows 8.1 setup with GPT, and the other 4 TB drive has a UEFI Windows 8.1 installed but broken.
I have also tried to install UEFI Win 8.1 on the 3 TB drive but it failed with the same error code as above.
This UEFI takes a lot to get ones head around dose't it, and me being much older than I once was makes it even harder. I have tried this installation at least 3 to 4 times now and doing these "Wipe Disk Functions" every time has so far lost me 3 whole days just in wasted time.
Any way of enabling the built in zip feature but not have zip files displayed as folders in Explorer and wherever else? I use a program that needs to use the zip feature but I really hate how zips show up as folders. I know how to disable the zip feature but that results in my program not being able to utilize zip processing.
View 9 Replies View RelatedI have like 50+ servers running on windows 2012
I always work form the built in admin
for some reason a lot of the servers im lately getting from leaceweb have something wrong with there OS
the build in admin account is constantly getting asked to do things as an admin like this
iv seen this now on 3-4 servers
My cd/dvd drive is not being detected by my laptop. It is getting power but is not being detected. I tried the cd and hardware Microsoft fix-its and the hardware troubleshooter. Nothing works
View 8 Replies View RelatedMy PC freezes when I'm just browing the web. It doesn't happen when I'm decoding a video, or when I'm playing a game, or running an emulator. It always happens when I'm browsing, or during idle. All of a sudden there's a slowdown, and the right mouse click menu takes a while to appear. When the right click menu appears it's kind of transparant/greyish and then it fully appears but none of the options work. For example I right click on the desktop and click task manager, but it never appears. I can minimize/maximize windows but cannot close or open new ones. Then it's completely frozen, I can't do anything other than move the mouse around.
Yet Metro UI still works, somewhat until it slows down and completely freezes again. I cannot restart or shut down PC, I have to do it manually by holding down power button or pressing the reset button.
I get no error messages... I used to have malware antibytes installed but removed it. I have all the drivers up to date (motherboard, sound, graphics card, intel, and windows updates of course).
Deleted graphics drivers and installed latest ones and the problem still persists.
These are my specs:
Intel i7 4790k
R9 290
8GB RAM 1600 Mhz
1 TB HDD
Windows 8.1
EVGA Nova G2 750 Watt PSU
MSI Z97 gaming 5 motherboard
Corair Hydro h100i
I have dual monitors set up, one at 1920x1080 and another one at 1600 x900 on DVI from graphics card. It's happening very frequently now, after about 15 minutes, no matter what I do.
Just performed a clean install of Windows 8 Pro. x64 on a new system. As soon as Windows finished installing, I opened secpol.msc, enabled the built-in administrator account, rebooted and deleted the first account I made during Windows setup and am now using the built-in administrator account as my main account. I don't care if the Metro apps. don't work.
What I want though is a way to change the account picture for this built-in administrator account. When I go into the Metro UI, click on the my username at the top right of the screen and click on "Change account picture", nothing happens.
When I go into the desktop then Control Panel -> User Accounts, there is no option to change the account picture.
How to change the user account picture for the built-in administrator account?
Built my pc about a week ago seemed to be working until i started getting constant bsod.
i have an Asrock z87 extreme 3 and a 4670k an r9 280x by sapphire and 2 x 4gb on corsair 8gb low profile ram.
the Bsod's often happen when semi intensive task are happening, watching hd videos playing games etc, and always happens when i restart pc after a shutdown or if it wakes from sleep.
The in-built account on my laptop has been somehow disabled and now I can't install any programs as it keeps asking for admin password even though it is disabled and I can't seem to re enable it.
View 3 Replies View RelatedWindows 8.1 and I have noticed that even after setting my (online) Microsoft account as Administrator, and disabling UACP, many actions still require me to "Allow" them.
So my question is, can I tun that so called "Microsoft Admin Account" to behave just like built-in Administrator one so I don't get those annoying prompts ? If not, is there a way to make everything on my PC run as Admin ?
I know how to set Admin right on a per-app basis, but that's not what am looking for, as I am the only one using this PC. And want to keep using my "Online" account coz I sync a lot of things.
I am new to Windows 8, I had a corrupt update, it was fixed, but my tile format is completely not how it should look...plus my built in apps, specifically photos, are gone...
View 2 Replies View Related