I just finished building my computer. Clean SSD and HDD.
I boot on USB with Win 8 in it.
I go through with it, installing on partitioned first and after failing that on unallocated space.
Both ways result in the installer preparing files, going through everything fine. Then at the end of that window my computer restarts and starts the whole set up all over again.
I can install Windows 8 in my SSD, right?
All, I have been experiencing big problems with Windows 8 Pro. I had been running the OS on a 120GB SSD up until a week ago with no problems until the following started happening:
Windows 8 started to reboot in a continuous loop with the following error message: Your PC ran into a problem and needs to restart. Error code 0cx000021a.
It would then put itself into System Repair mode, but was unable to fix itself. It then booted to the System Repair screen and so I attempted the following in order:
Tired to run System Restore, failed
Tried to System Repair, failed
Tried to System Refresh, failed
Tried to System Reset, failed.
After running System Reset and failing, it rebooted and I was left with 'There is no operating system installed on this device'.
As the version of Windows 8 I have is an online-only installation I then went back into my original order and ordered the accompanying Windows 8 recovery disk. Several days later the disk arrived and I attempted to run a windows 8 re-install from the disk. I followed the onscreen instructions and thought great, this is going to work. However first time, 'Getting files ready for installation' got to 57%, then I received the following error: Windows cannot install required files. The file may be corrupt or missing. Restart the installation. Error code 0x80070570
So I completely formatted the SDD, deleted partition. Created new partition. The second time, 'Getting files ready for installation' got to 82%, then as before: Windows cannot install required files. The file may be corrupt or missing. Restart the installation. Error code 0x80070570
At this point I turned off the PC. How I can turn my now brick of a performance PC back into a working system?
bought Win 8 for a Win 7 Dell laptop in Jan. 2013 and have happily used Win 8 for a year. I have a Win 8 backup disc and valid license key.
I decided to update Win 8 to the free Win 8.1 a few days ago and went ahead with the download and installation of Win 8.1. However, after a seemingly successful installation, set up and login, a simple reboot resulted in no longer being able to boot. I can boot to safe mode but cannot boot properly no matter what I do.
There is no specific error message when I reboot, the OS simply fails to reach the login stage and reboots again. It then opens the 'Failed startup' page asking if I wish to use advanced options or restart.I tried turning off all non-Microsoft software like AVG, Comodo, Samsung Keys, etc., but it didn't solve the issue.
I also noticed that Safe Mode boot fails when I attempt to boot to 'Safe Mode with Networking' but is successful when booting to simple 'Safe Mode' or 'Safe Mode with Command Prompt'. I have attempted to burn the Win 8.1 disc as described on this site but from a Win XP system which according to the download software is not possible and unfortunately I do not have access to another system.
I know how to install windows but I am not able to do it before this problem,
1. Acer log on screen (Loading)
2. After loading, this will be the next screen, the system will restart
3. Then after restarting, this will be next (preparing automatic repair then diagnosing)
4. then after that, it will ask to restore the system
5. If you select restore, the system will restart then stuck in this screen
I am new in windows 8 and acer. I don't know what happen but before the system says its updating, then when I restart it this problem occurs.
I am trying to install Windows 8.1 onto a new PC a clean install. I boot from UEFI CD/DVD Drive with the windows 8.1 install disk in it and it gets to the "Press any key to continue" screen, I press a key and it just restarts my computer. Then I try to boot from just regular CD/DVD Drive it says Missing BootMGR.
View 9 Replies View RelatedI am having an issue where, with my laptop lid closed because I use my monitor, when I reboot my laptop it never actually comes back on. If I remember to open the lid in advance, there is no issue.
I have my settings set that when my laptop lid is closed, nothing happens.
This is a Windows 8 OEM CD install, on an i7 x64 system. I have tried this with both UEFI and legacy modes.
I cleaned the drive and allowed setup to partition and format how it sees fit on an Intel SSD.
The system copies files, sets them up and reboots.
The blue windows logo is up for a minute, then the screen (not the PC) power cycles (probably due to a resolution change). It hangs there on a black screen. There is a mouse cursor that responds and the num lock toggles on the kb, but nothing else. CTRL-ALT-DEL does nothing.
He says the last thing the computer did was a windows updated and the day after did not start, when i start it so comes the logo forward "VI10" and a loading circle below for a 1min or 2. then you hear the fan is increasing and it is reading something, then it jumps to a black screen for 1-2 minutes then comes "Preparing to configure Windows".
I let it stand for six hours before I turned it off and start looking try start it in safe mode, have used boot setup before on XP and W7 so know how it looks / works but I can not access it anywhere, I read somewhere you could force it with F8 but do not work .
Also try to bot with cd = same shit
it is a :: Sony VA10
Intel inside Core i5
Model: SVE151J13M
Windows 8
Using samsung chronus 7 laptop : Windows 8.1 64 bit OS.
On start up get the samsung screen then a blue screen with a sad face saying pc needs to restart. Then goes in a continuous reboot.
I tried using the Windows 8 recovery cd. But get on the screen press any key to boot from cd. but press any key has no effect and goes back into loop as before.
Press f2 to get to bios reset defaults, no luck either, tried f10 just get boot up order, unable to find what keys boots into recovery mode, f8 does nothing no safemode.
Windows was preinstalled.
I've installed windows 8 just now and after I install drivers it gets stuck in an infinite reboot loop. The motherboard is an ASUS P8Z68-V.
I downloaded the correct drivers from the Asus website and I've also updated my BIOS to the latest version.
I had the problem when installing the chipset driver from the asus website. I skipped this one after a reinstall and then installed the rest. Seems like that wasn't the problem. I read around but couldn't get any decent answers. I tried a memtest86+ and that came back negative. Next i tried to set the SATA settings in BIOS to AHCI/RAID/IDE, that didn't work either.
Specs:
Intel Core I5 2500K
OCZ Vertex 3 60GB
6 GB Kingston DDR3 PC10600
ASus P8Z68-V
2 other regular SATA hdd's
I just did a refresh of my install, and this time it booted. This is the list of removed apps:
I was installing Windows 8 at my desktop pc.Suddenly power cut occured and it caused the compute to shut down.Then when I restarted my pc again a messege appeared saying that the installation has been corrupted and it can't be continued and it doesn't log on.After that when I tried to re-install Windows 8 the setup got stuck at the "setup is starting" window.I waited overnight for it to go and the installation to start.But it doesn't happen.I have tried to re-install several times but the same problen happens again and again.So neither I can log into my computer now nor I can re-install windows.I don't know what to do.
View 9 Replies View RelatedI have a HP Envy 4 Ultrabook and I want to install Windows 8 from scratch, I put the installation files on a flash drive from a DVD of Win 8 I had, but when I go to install it, it says the "We couldn't find any drives". I have tried using DiskPart within the CMD as well, but it only finds my flash drive when I run list disk. Also, my drives are completely formatted, and I accidentally wiped the recovery partition. I tried with a USB of Win 8 Pro, and it was fine, showing all of my drives correctly, but that version is linked to another PC, so I can't install it. Also, I booted into a Linux Mint live CD and tried to install it, it sees my hard drive correctly, but the Windows install does not, I can't figure this out, never encountered it before. Is Linux my only option at this point?
View 1 Replies View RelatedI have tried updating my Windows 8.1 Pro (64-bit, upgraded from Windows 8 Pro) with the new "Update 1" (KB2919355) but it always fails with ERROR code 8007005 (or 80073712).
What I have tried do to fix:
Run WindowsUpdateDiagnostic (that e.g. removes files from C:WindowsSoftwareDistributionDownload and cleans Windows update history metadata info)DISM.exe /Online /Cleanup-image /ScanhealthDISM.exe /Online /Cleanup-image /RestorehealthDISM.EXE /online /cleanup-image /startcomponentcleanup
After all of this, still the update (KB2919355) fails
There must be something that Microsoft needs to fix, there are xxxxxxxxxxxx amount of similar complains and reports out there...
I decided to install Win 8.1 RTM x64 yesterday but what I expected to be a breeze turned into a nightmare. Installation fails, I am even unable to get into Safe Mode.
I was running Win 7 Ultimate x64 before without any issues whatsoever.
I already described my issues here, with errors and logs: Windows 8.1 RTM installation fails on Dell XPS 1340
Changed memory from 2x4GB to original 2x2GB but completely same issue
I'm trying to install Windows 8 on my pc (hp pavillion g6) which its hdd is completely empty; but it gets stuck on expanding files at 98%
I'm installing it via dvd
I have recently formatted my old windows. But now I am not able to install windows 8(actually even windows XP and seven) . When I try to boot from USB setup starts But 'Getting files ready' (which is second step of installation) stucks at midway like at 14% or 52% or 74% i.e. at any arbitary percentage and nothing happens . Actually I am able to move my cursor but installation no more proceeds further . I have tried to format many times and to run installation but everytime installation stuck at midaway without any error .
My laptop specs are : Acer aspire 5745 , 500GB HDD , 3GB RAM , intel core i3 processor
I have a windows 8 laptop and a linux desktop, both connected to the same screen using hdmi - since my screen has only 1 HDMI input, I use an HDMI splitter.
Every time I move from the linux to the windows 8 laptop (using a HDMI mini remote control), I get a message from windows saying that in order to apply these changes I need to reboot.
Note that I also use the same wireless keyboard and mouse for both computers - each time I change from one computer to the other, I unplug the USB that controls them and plug it in the computer I will use.
I think that the problem is related to the HDMI, not the keyboard/mouse usb - but I am not sure.
Needless to say that it is very annoying and I cant keep restarting the LT each time I move from one to the other.
I checked event viewer to see what causes this and these are the relevant messages:
1 - Device 'USBVID_045E&PID_0745&MI_017&1a5cec9a&0&0001' requires installation.
Microsoft-Windows-Kernel-PnPConfig/Configuration
Kernel-PnPConfig
Event id: 3
2 - A reboot is required to complete device installation of device 'USBVID_045E&PID_0745&MI_017&1a5cec9a&0&0001'
Microsoft-Windows-UserPnp/DeviceInstall
UserPnp
Event id: 8000
how I can fix this, make it stop requesting reboots?
I have an ASUS mother board and don't use an graphics card.
I had two monitors and an HDMI cable plugged in. The short story is that the Intel drivers seem to get lost.
Windows installed normally until it went into to the final setup.
The program will switch to another screen at this point and picked a monitor and the HDMI to TV connection.
Unplugging the HDMI cable allowed me to finish.
Windows 8.1 RTM installation says (Display) not supported
1. I tried with windows 8 x64 RTM upgrade,it started and after restart it displayed display not supported
2. So I tried with windows 8.1 x64 beta upgrade still same msg,so itried updating all display drivers and other driver and tried again still same message
3. So tried clean install with windows 8.1 RTM, still same msg diplay not supported
Config details
Acer x153W monitor
Gigabyte B75M D3H motherboard
Intel core i3 3220 ,4GB RAM sandisk
Intel HD graphics 4000
Windows 8.1 x64 RTM
I have just installed windows 8.1 on Dual Core Laptop. Just wanted to know how can I create a backup of my Windows 8.1 installation so that in future if Windows crashes I can restore the installation+other s/w installed, like we do fresh install of Windows through USB boot.
View 2 Replies View RelatedMy friend has an ultrabook (hp envy 6-1113tx) which came with windows 8 pre-installed and after of more than 1 year of usage the OS became unstable and sluggish so he wanted to do a reinstall. I made bootable usb and enabled the legacy mode in BIOS after which the usb became visible in boot options. But it didn't show any HDD to install the OS on during installation. And also the HDD partition style is GPT.
View 4 Replies View RelatedI want to try creating a Windows 8 installation USB on my computer and using it to try booting up and repairing my friend's computer which is stuck in recovery mode.
If I put the installation files onto my own personal flash drive and create an installation USB out of it, would I later be able to delete the files off it and continue using it as a regular flash drive?
I am installing the Windows 8 upgrage on a windows 7 professional 64 machine.
The upgrade assistant noted the DVD and Secure boot issues that I believe are common incompatibilities.
I ordered the $39.99 upgrade and tried to install and it fails out at 32%
Never asks for product key.
I have chkdsk/r/f, turned off Avast, backed up with no success.
Of course MS is not taking calls over the weekend for this little problem, so i remain frustrated and a little disappointed.
I have a Dell Inspiron 7720. I have created an uefi bootable usn flash disk with rufus 1.4b
I'm trying to boot from it so i can create a Windows 8.1 uefi installation and the problem is that the usb flash disk wont boot.
I have secure boot enabled and legacy option rom disabled.
I get as far as " a driver is needed to continue installation" not found, make sure its on the right media. Here is what i got done on my own..
1- BIOS setting "legacy" and U E F I" boot from USB.
2- F 9 to choose boot order.. selected USB device
3- Installation starts for WIN 7
4- Driver is needed to continue, and i have no clue what it is..some one pointed me to . f 6 f l p y-x 64 because its an HP Envy...
5- Driver not found / wrong driver..
6- Shut down restart.......................
My DVD is Windows 7 ultimate X 32, X 64..
No matter what i cant boot form my USB /U E Fl /WIN 7 pen drive.seems like its not recognized or drivers for the USB chip set not installed.. Of course using the O E M DVD of win 7 fails. because of the G P T style.
I'm trying to recreate win 8.1 pro system reserved partition on my ssd. Initially I installed windows on my ssd (c: ) and windows created the sysres partition on my unformatted hd (without telling me anything). After some trouble I managed to be able to boot from ssd directly without going through the sysres partition on the hd. Now if possible I'd like to recreate the sysres on the ssd (by disconnecting my hd so that windows has no other options than creating this on the ssd). If a try a system refresh it tells me it would wipe away all my user installed apps.
View 4 Replies View RelatedI've been trying to install the printer software for an HP Laserjet printer and can't get it installed. I've even had an HP tech person try to install it via remote control and he couldn't. I was told that something on my system is preventing the installation.
I ran sfc /scannow and it found corrupted files that it couldn't repair. I would be happy to send any log files that may be needed.
I partitioned my hard disk into a 150GB (C) and 500GB (D) and upgraded from Win7 to Windows 8 (and subsequently Windows 8.1 after the recent updates). The OS is installed onto the C Drive.
Performed a Clean Installation of Windows 8 on my C Drive. Under the Choose What To Keep Option, I selected Nothing.
Technically speaking my C Drive would have been wiped clean but after the Windows 8 installation, my C Drive only has 5GB of space left (145GB is being used). The Windows 8 OS is not detecting any of the old programs in my C Drive and the automated Disk Clean up feature only offers removal of temporary internet files. Which brings me to one possible assumption...
The Clean Installation Failed. Windows 8 simply installed itself again on my C Drive and the remaining disk space (containing my previous Windows 8.1 OS and programs) is locked down somewhere. I suspect this had something to do with changing my HD format 3 years ago when I wiped clean my pre-loaded ASUS laptop Win7 and partitioned it to install my Windows 8.
How to remove my previous OS?
Is it possible not to have the partition "recovery"?
Because if you look at the two tutorials:
- UEFI (Unified Extensible Firmware Interface) - Install Windows 7 with - Windows 7 Forums
- UEFI (Unified Extensible Firmware Interface) - Install Windows 8 with
In the tutorial to install Windows 7 in UEFI, there is not that damn partition recovery, while in the tutorial for Windows 8, we can see it.
When I install Windows 7 (MBR mode), I avoid this partition "recovery" by creating a partition with a name before installation. I install the OS on it and everything is fine, no partition "recovery" But here, since one must delete all partitions, If I create a GPT disk with a partitioning tool before installing, is that it might be appropriate?
I updated one laptop with one promo code bought etc and all fine. Came to do the same with another pc but after i inserted the promo code and clicked to submit the payment the screen froze at that point and wouldn't go any further.
Have received an email from Paypal to tell me the payment has been processed but obviously when i try to re-install it etc it's asking me for a promo code and to pay again... i can't carry on from where i left off !! what i can do now?
This is all done via the online offer and Windows Upgrade Offer using the downloaded Upgrade Assistant.
bypass this error code installing my win 8 software
"your computer needs repaired
error code: 0xc0000260