Setup Installation :: Windows 8 To 8.1 - Unable To Reboot?
Jan 24, 2014
bought Win 8 for a Win 7 Dell laptop in Jan. 2013 and have happily used Win 8 for a year. I have a Win 8 backup disc and valid license key.
I decided to update Win 8 to the free Win 8.1 a few days ago and went ahead with the download and installation of Win 8.1. However, after a seemingly successful installation, set up and login, a simple reboot resulted in no longer being able to boot. I can boot to safe mode but cannot boot properly no matter what I do.
There is no specific error message when I reboot, the OS simply fails to reach the login stage and reboots again. It then opens the 'Failed startup' page asking if I wish to use advanced options or restart.I tried turning off all non-Microsoft software like AVG, Comodo, Samsung Keys, etc., but it didn't solve the issue.
I also noticed that Safe Mode boot fails when I attempt to boot to 'Safe Mode with Networking' but is successful when booting to simple 'Safe Mode' or 'Safe Mode with Command Prompt'. I have attempted to burn the Win 8.1 disc as described on this site but from a Win XP system which according to the download software is not possible and unfortunately I do not have access to another system.
I am having an issue where, with my laptop lid closed because I use my monitor, when I reboot my laptop it never actually comes back on. If I remember to open the lid in advance, there is no issue.
I have my settings set that when my laptop lid is closed, nothing happens.
I just finished building my computer. Clean SSD and HDD.
I boot on USB with Win 8 in it.
I go through with it, installing on partitioned first and after failing that on unallocated space.
Both ways result in the installer preparing files, going through everything fine. Then at the end of that window my computer restarts and starts the whole set up all over again.
All, I have been experiencing big problems with Windows 8 Pro. I had been running the OS on a 120GB SSD up until a week ago with no problems until the following started happening:
Windows 8 started to reboot in a continuous loop with the following error message: Your PC ran into a problem and needs to restart. Error code 0cx000021a.
It would then put itself into System Repair mode, but was unable to fix itself. It then booted to the System Repair screen and so I attempted the following in order:
Tired to run System Restore, failed Tried to System Repair, failed Tried to System Refresh, failed Tried to System Reset, failed.
After running System Reset and failing, it rebooted and I was left with 'There is no operating system installed on this device'.
As the version of Windows 8 I have is an online-only installation I then went back into my original order and ordered the accompanying Windows 8 recovery disk. Several days later the disk arrived and I attempted to run a windows 8 re-install from the disk. I followed the onscreen instructions and thought great, this is going to work. However first time, 'Getting files ready for installation' got to 57%, then I received the following error: Windows cannot install required files. The file may be corrupt or missing. Restart the installation. Error code 0x80070570
So I completely formatted the SDD, deleted partition. Created new partition. The second time, 'Getting files ready for installation' got to 82%, then as before: Windows cannot install required files. The file may be corrupt or missing. Restart the installation. Error code 0x80070570
At this point I turned off the PC. How I can turn my now brick of a performance PC back into a working system?
I am trying to install Windows 8.1 onto a new PC a clean install. I boot from UEFI CD/DVD Drive with the windows 8.1 install disk in it and it gets to the "Press any key to continue" screen, I press a key and it just restarts my computer. Then I try to boot from just regular CD/DVD Drive it says Missing BootMGR.
This is a Windows 8 OEM CD install, on an i7 x64 system. I have tried this with both UEFI and legacy modes.
I cleaned the drive and allowed setup to partition and format how it sees fit on an Intel SSD.
The system copies files, sets them up and reboots.
The blue windows logo is up for a minute, then the screen (not the PC) power cycles (probably due to a resolution change). It hangs there on a black screen. There is a mouse cursor that responds and the num lock toggles on the kb, but nothing else. CTRL-ALT-DEL does nothing.
I have been trying to reboot my dells laptop (windows 8) but I cannot because it's asking for a recovery media and restart with the media. I did not create a recovery disc yet, so how can I reboot my laptop without a disc?
Upgraded to Windows 8.1 from Windows store. Can't use refresh or reset anymore.
Installed Windows 8.1 trial. Can't use Windows 8 OEM key to activate it.
Attempted to install windows 8 from Microsoft site, so I could use my Windows 8 OEM key, however, won't accept key on site because it says it is not a retail key.
How can I get Windows 8 back on my computer, activated with my OEM key?
If I do that then I guess I can upgrade it again from the Windows store to Windows 8.1.
I have Windows 7 64 bit Ultimate installed and activated. I am trying to upgrade to Windows 8 and the upgrade assistant tells me it needs at least 2gb when I have 8gb and Windows 7 sees and knows I have 8gb
I am thinking it could be my bios, but it's already at the latest version
Here are some photos from my bios, so you can tell me if there is anything I need to enable.
These are photos from my bios. I need to change to get this to work.
I own a Lenovo Y580 Ideapad that came with Windows 8 preinstalled, so I was never given a license key or CD, and I am trying to use the SSD as my main drive by doing a clean install of Windows 8 there and then copying over any other files I want from my HDD.
I downloaded a Windows 8 iso file and verified the hash so I know it was a clean file. I burned that iso to a flash drive using Rufus, following all of the instructions in this post: UEFI Bootable USB Flash Drive - Create in Windows
When I attempted to boot from the flash drive my computer would hang at the Lenovo start up screen (black screen with Lenovo written on it) and then start flashing on/off every 5 seconds for a minute or two and then hang at the start up screen once more indefinitely. It would not let me F2 to BIOS when I turned it on or F12 to Boot device selection.
So, I formatted the flash drive and then followed this post: Create Bootable USB or DVD with Windows 8 ISO Once again, no dice. Same problem. I tried putting my HDD as the very last boot option, enabling Legacy boot mode, etc etc but still haven't been successful. The iso I used was an x64 Windows 8 (core I believe? Just regular). I am currently downloading the 8.1 iso to see if that will work.
I just found that 8 doesn't come with WMP what the heck is Microsoft thinking !! Music is really one of my passions and now I find I cannot play CD's with 8 -
I am having a hard time upgrading from windows 8 to 8.1, I have tried installing through the store, installing using the files downloaded by the store (copied them before they were deleted) and they all give me an error. The errors are as follows:
installer using key: This key does not work with this version of windows 8 (using Professional 64-bit, tried 8 and 8.1 key but neither work).
Installer using ei.cfg file: Setup failed to authenticate the product key (or similar, it is set to professional so this should not be an issue).
Store: just says setup failed.
The first time I tried updating, the installer froze and did not complete so I had to re-start, could this have something to do with the issue I am experiencing? My specs are as follows:
Windows 8 Professional 64-bit 2TB HDD 16GB DDR3 RAM Nvidia Geforce GT545 with 3GB VRAM Realtek AC97 onboard audio Intel core I7 3.2ghz quad-core multi-thread processor
Recently I was trying to upgrade my Windows 8 Pro computer to Windows 8.1 Pro. But I had no working USB sticks so I thought I could make a NTFS partition into my hard drive and extract the Windows 8.1 Pro installation setup files on there. So when I restarted my computer, it booted up into the Windows 8.1 Pro installing setup but said that I needed to boot up into Windows and put the installation media back in. But I could not and just kept booting into the installation.
So I thought that if I delete the partition I could go back to Windows. So I did with DISK PART. Now when I restarted it, it now gives me "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER". I'm guessing that when I deleted that partition, there is unallocated space left and my computer is trying to read off that but not the Windows partition.
Currently running WinXP, meets all requirement for Windows 8. However, when I try to copy the ISO file to USB using Win7 DVD download tool to create a bootable USB device, the USB I'm trying to copy it to will not show up in the list of "Devices to Copy In".
I have tried this several times with 2 different USB drives, both 8GB, one with more than 4GB free and the another is completely empty. They both work perfectly well, but when I reach the screen with the list of devices to copy the ISO file on to (Step 3 of 4, Win7 USB/DVD Download Tool) they don't show up on the list despite re-inserting them and refreshing a couple hundred times. The only removable device that does show up is the Floppy Disk.
I am using the DVD is not an option, since my DVD player crashed last week and I don't have the time to get it fixed right now, and I'd really like to get Windows 8 installed as soon as possible.
Its a HP Envy laptop with a 1TB HDD running on windows 8. But the laptop has been having a lot of start-up errors and finally some files corrupted and windows wouldn't function properly. So I decided to reformat it to 8.1, a complete wipe to get rid of all the pre-installed HP crap.
So here's what I've tried, in the same order.
> I tried to install windows 8.1 through windows 8. -It failed after it restarted- > I tried to install windows 8.1 through USB ontop of the Windows Partition (There were 5 partitions). -It failed because of a GPT (If I remember correctly) Partition error- > I decided to delete all the partition and install Windows 8.1 ontop the entire 1TB disk space. -It started installing but then failed with an error code 0x80070057- > I tried diskpart through CMD to clean the disk drive then followed with a format to ntfs -It always just sticks on 0 percent%- > I tried all the same steps with Windows 7 -The exact same errors happen-
I've got one last option, plug the HDD into my desktop and try to format it that way but this is a lot of work so I'd like to keep it as a last resort.
I have a fairly new PC running Windows 8 and I can't seem to upgrade to Windows 8.1--There are a bunch of issues-
1. Can't connect to the Windows Store--tried everything here save the refresh, which I do NOT want to do. 2. Downloaded the 8.1 ISO and burned it to a disc--get the error message that 8.1 could not be installed--0x101-0x20017 error--tried installing with a clean boot, turned off antivirus suite, etc 3.sfc /scannow does not work.
So currently I'd like to forget about the store for the moment and continue updating from the downloaded ISO. I really do not wish to restore the computer and I have a lot of software I'd need to reinstall and this would take a long time.
I have problem about booting from usb. I will add a short video about what is going on when I am trying to boot from usb but first let me show you picture of my system information.
I have tried 2 different usb to boot and one of them is shown in boot page but not opened the other one act like it does not exist. First usb worked on 2 different computer. Second one haven't tried on an other computer. I am using Universal USB Installer which is recommended by Ubuntu to creat bootable USB.
NOT 1: I wrote "Ubuntu" bu I think problem is not realated with what kind of bootable OS has it in.
I just downloaded windows 8 prof from my msdn, and I made a bootable usb stick with WintoFlash and now when I am trying to install I get this message: Windows cannot open the required file D:/Sources/install.wim. The file may be corrupt or missing. Make sure all files required for installation are available, Error code: 0x80070570. I have looked into the usb stick but install.wim is just there. And I did a disk chek in wintoflash and it found this:
Found problems with source files.
Can't find file D:sourcesoot.wim
Can't find file D:sourcesidwbinfo.txt
Can't find file D:ootmgr
Can't find folder D:oot
Can't find file D:sourcesinstall.wim or file D:sourcesinstall.swm
I bought a new laptop with Windows 8 pre-installed (and immediately updated it to 8.1).
I decided after a week to buy an SSD and installed Windows 8.
I now find there is no product key to be found, and can't seem to activate Windows.
1. I've tried a few things. I tried to enable UEFI in PC Settings, but the setting isn't there (does this mean my laptop doesn't support UEFI?) 2. I entered my BIOS. CWM was enabled, and pwe enable. But SECURE BOOT disabled. So I enabled SECURE BOOT, but regardless of what options I select, the laptop keeps booting into the [Legacy] BIOS, possible because there are no BOOT OPTION PRIORITIES found any longer?
My problem is activating windows, and if UEFI is an option, enabling it.
I'm trying to install Windows 8 on my sister's desktop which has a Gigabyte GA-MA785GM-US2H. I bought a new Samsung 830 SSD and it is being detected but with SATA I 1.5. When I try to format the drive it crashes and reboots.
I tried running the installer on an OCZ solid 3 which is what is running Windows 7 and the installer also crashes. Is there a way I can get the error before it reboots the installer?
How to make usb bootable. I have done the following:
- Used "Rufus" as per tutorial to make UEFI Bootable USB Flash Drive - used a software to test usb if bootable and it was. - Set Secure Boot off - Adjusted BIOS to boot usb (kingston) as primary.
Yesterday, after many, many problems with my computer, I finally decided to reinstall Windows 8.1 Pro onto my ASUS X200CA netbook. However, after backing up and reinstalling the OS, I found that when I tried to disable "Launch CSM" in my BIOS, all of my boot options would disappear and my laptop would continually boot into my BIOS. When I re-enabled "Launch CSM", the boot options would reappear - however, it had not included the "Option #1 - Windows Boot Manager" that I had seen in my other installation.
I tried a clean install on my system which has a Gainward GT430 (nVidia GT430) 1GB display adapter. What happens is that soon after booting from the DVD the display becomes corrupted (blurred and difficult to read) and I can only barely make on what's on the screen and proceed with the installation.
After the point where I format my drive, windows looks like its installing but after the reboot the display goes to sleep, and I have to start over.
On the same system installing Windows 7 had no issues whatsoever. Installed fine with nearly all the drivers available natively to windows. I was installing Windows 8 64 bit using original media.
From many days i was trying to make backup but i was not able to make than i found that my Master File Table it corrupt which located in System Reserved.
Than i thought of Re-Installing Windows than i Formatted System Reserved Drive & My C Drive.Now I am not even able to Install Windows.
Error Shown by the Windows Setup - Setup was unable to create a new system partition or locate an existing system partition.
I recently purchased an Asus X551 laptop with Windows 8 but straight the way uninstalled Windows 8 and installed Ubuntu (after creating a Windows 8 recovery drive just in case). I have since decided that I want Windows 8 back as I have found that I cannot use a lot of software on Linux. The laptop did not come with any form of recovery disk or installation disk, the only reminent of Windows 8 I have is the recovery USB that I created from within the OS.
When I plug in the USB and boot from it it brings up the recovery menu with options to reset the PC but when I click it it says something like - "Unable to reset PC. A required partition is missing".
I have a 256gb ssd installed on my laptop and I recently had installed Ubuntu partition on it and ended up removing it. I have instead reinstalled a fresh copy of Windows 8. However I see no other partition during the installation processing and it's saying I only have 238gb available not my disk's full 256gb. So far I tried chkdsk and disk management and it failed to see any other used space.
I have installed windows 8 on a windows 7 PC on a separate hard disk. But I am unable to get boot option at startup. Every time I have to select windows 8 boot disk from bios boot menu.
