Setup Installation :: Unable To Install Windows With Gainward Display Adapter GT430?
Jan 29, 2013
I tried a clean install on my system which has a Gainward GT430 (nVidia GT430) 1GB display adapter. What happens is that soon after booting from the DVD the display becomes corrupted (blurred and difficult to read) and I can only barely make on what's on the screen and proceed with the installation.
After the point where I format my drive, windows looks like its installing but after the reboot the display goes to sleep, and I have to start over.
On the same system installing Windows 7 had no issues whatsoever. Installed fine with nearly all the drivers available natively to windows. I was installing Windows 8 64 bit using original media.
View 6 Replies
ADVERTISEMENT
Jun 12, 2013
mSATA to 7 pin adapter for SSD or HDD: mSATA to 7pin SATA Adapter
reviews on Amazon.com: Amazon.com: Micro SATA Cables - mSATA to 7pin SATA Adapter: Electronics
I ordered a Dell XPS 8500 Special Edition desktop with a 64bit Windows 7 Ultimate OS installed on a 500GB Samsung 840 SSD and a 3TB HDD for videos/music/documents/etc. I want to install Windows 8 so that it will be a dual boot system along with Windows 7. Each OS will be on a separate SSD. I have an empty mSATA port. So, I've ordered a mSATA to 7 pin adapter like above to connect a 256GB Samsung 840 Pro SSD to and to install Windows 8 on it. I understand that this mSATA connector should make the 256GB SSD bootable.
The desktop comes with an OEM Windows 8 installation disk. I have a Windows 8 Pro upgrade disk. What would happen if I had to install Windows 8 a second time on the same SSD on the same desktop? I've read that the 8 Pro upgrade deletes the original OEM serial number. How would I install Win 8 again if I would need to for some reason? Would I have to purchase another edition of Win 8?
With the 3TB HDD, I would like to partition it so that both Win 7 and Win 8 can use it, but on separate partitions. How would I do this? Would it be like any partition? GTP?
View 4 Replies
View Related
Jan 13, 2013
I have Windows 7 64 bit Ultimate installed and activated. I am trying to upgrade to Windows 8 and the upgrade assistant tells me it needs at least 2gb when I have 8gb and Windows 7 sees and knows I have 8gb
I am thinking it could be my bios, but it's already at the latest version
Here are some photos from my bios, so you can tell me if there is anything I need to enable.
These are photos from my bios. I need to change to get this to work.
View 7 Replies
View Related
Jul 31, 2014
I own a Lenovo Y580 Ideapad that came with Windows 8 preinstalled, so I was never given a license key or CD, and I am trying to use the SSD as my main drive by doing a clean install of Windows 8 there and then copying over any other files I want from my HDD.
I downloaded a Windows 8 iso file and verified the hash so I know it was a clean file. I burned that iso to a flash drive using Rufus, following all of the instructions in this post: UEFI Bootable USB Flash Drive - Create in Windows
When I attempted to boot from the flash drive my computer would hang at the Lenovo start up screen (black screen with Lenovo written on it) and then start flashing on/off every 5 seconds for a minute or two and then hang at the start up screen once more indefinitely. It would not let me F2 to BIOS when I turned it on or F12 to Boot device selection.
So, I formatted the flash drive and then followed this post: Create Bootable USB or DVD with Windows 8 ISO Once again, no dice. Same problem. I tried putting my HDD as the very last boot option, enabling Legacy boot mode, etc etc but still haven't been successful. The iso I used was an x64 Windows 8 (core I believe? Just regular). I am currently downloading the 8.1 iso to see if that will work.
View 9 Replies
View Related
Feb 17, 2013
Windows 8 clean install crashes on first screen
Side note - I succeeded on installing Windows 8 on that particular laptop using UEFI, but NOT legacy. No matter what I tried it failed.
View 7 Replies
View Related
Aug 19, 2014
Its a HP Envy laptop with a 1TB HDD running on windows 8. But the laptop has been having a lot of start-up errors and finally some files corrupted and windows wouldn't function properly. So I decided to reformat it to 8.1, a complete wipe to get rid of all the pre-installed HP crap.
So here's what I've tried, in the same order.
> I tried to install windows 8.1 through windows 8. -It failed after it restarted-
> I tried to install windows 8.1 through USB ontop of the Windows Partition (There were 5 partitions). -It failed because of a GPT (If I remember correctly) Partition error-
> I decided to delete all the partition and install Windows 8.1 ontop the entire 1TB disk space. -It started installing but then failed with an error code 0x80070057-
> I tried diskpart through CMD to clean the disk drive then followed with a format to ntfs -It always just sticks on 0 percent%-
> I tried all the same steps with Windows 7 -The exact same errors happen-
I've got one last option, plug the HDD into my desktop and try to format it that way but this is a lot of work so I'd like to keep it as a last resort.
View 4 Replies
View Related
May 20, 2014
I bought a new laptop with Windows 8 pre-installed (and immediately updated it to 8.1).
I decided after a week to buy an SSD and installed Windows 8.
I now find there is no product key to be found, and can't seem to activate Windows.
1. I've tried a few things. I tried to enable UEFI in PC Settings, but the setting isn't there (does this mean my laptop doesn't support UEFI?)
2. I entered my BIOS. CWM was enabled, and pwe enable. But SECURE BOOT disabled. So I enabled SECURE BOOT, but regardless of what options I select, the laptop keeps booting into the [Legacy] BIOS, possible because there are no BOOT OPTION PRIORITIES found any longer?
My problem is activating windows, and if UEFI is an option, enabling it.
View 9 Replies
View Related
Jul 22, 2013
I'm trying to install Windows 8 on my sister's desktop which has a Gigabyte GA-MA785GM-US2H. I bought a new Samsung 830 SSD and it is being detected but with SATA I 1.5. When I try to format the drive it crashes and reboots.
I tried running the installer on an OCZ solid 3 which is what is running Windows 7 and the installer also crashes. Is there a way I can get the error before it reboots the installer?
View 9 Replies
View Related
Jun 14, 2014
From many days i was trying to make backup but i was not able to make than i found that my Master File Table it corrupt which located in System Reserved.
Than i thought of Re-Installing Windows than i Formatted System Reserved Drive & My C Drive.Now I am not even able to Install Windows.
Error Shown by the Windows Setup - Setup was unable to create a new system partition or locate an existing system partition.
View 7 Replies
View Related
Oct 25, 2013
i try to install the update from the store it freezes at "setting up a few more things" usually at 76% but one time at 6%. My computer meets the requirements, all drivers latest.
View 9 Replies
View Related
Aug 29, 2014
I'm having trouble with installing Java. My PC mentioned that my java version is too old and that i need to download and install the latest version, but when i do. it reports an error of being unable to download it.
Here is what it said, unable to download [URL] .... for installation.
It won't let me take a screen shot.
View 2 Replies
View Related
Apr 17, 2013
When I try to change my video adapter the only option I get is Microsoft Basic Display Adapter.
I have a Nvidia Geforce Go 7400
Specs:
Operating System: Windows 8 Pro 32-bit
System Manufacturer: Dell Inc.
System Model: Latitude D820
BIOS: Phoenix ROM BIOS PLUS Version 1.10 A10
Processor: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz (2 CPUs), ~2.2GHz
View 2 Replies
View Related
Sep 2, 2013
Windows 8.1 RTM installation says (Display) not supported
1. I tried with windows 8 x64 RTM upgrade,it started and after restart it displayed display not supported
2. So I tried with windows 8.1 x64 beta upgrade still same msg,so itried updating all display drivers and other driver and tried again still same message
3. So tried clean install with windows 8.1 RTM, still same msg diplay not supported
Config details
Acer x153W monitor
Gigabyte B75M D3H motherboard
Intel core i3 3220 ,4GB RAM sandisk
Intel HD graphics 4000
Windows 8.1 x64 RTM
View 8 Replies
View Related
Mar 27, 2014
I just bought a used HP Pavilion p7-1423w from a computer store locally. It ran fine in the store and when I got it home. It did not come with any recovery disc. After poking around (first time Windows 8 user also), I noticed a bunch of porn pics and thumbnails that were obviously from the previous owner. I selected the "reset the pc, erase all his personal files, and re-install Windows" option. After clicking the final "reset" button to begin the process, I left the room. I came back 30 mins later and my display was off. I thought it went to sleep or screen saver. I moved the mouse, hit a few keys, and still no display at all, as if there was no cable attached. I decided to wait another hour, and still no display.
I changed to the other dvi port, still nothing. Finally, I hard booted and restarted. Still no display at all. No splash screens, no errors screens, nothing at all. Just my tv saying "no input". I removed the hard drive and hooked it up as an external to my laptop. It shows Recovery folder-> WindowsRE folder-> winre.wim (unknown file type).
View 3 Replies
View Related
Jul 6, 2014
Normally, I'm used to install Windows 8.1 by running setup.exe from Windows Explorer(not by boot DVD/Flash Drive). But yesterday when I tried to install it by a boot dvd, I faced a problem which's solution I couldn't find in google, when I press any key after the message appears(Press any key to boot from cd/dvd), the setup loads and my display goes black and shows a message "The current input timing isn't supported by the monitor display. change your input timing tp 1280x1024@60Hz or any other monitor listed timing as per the monitor applications."
I needed to restart the PC by the button in the CPU and couldn't install Windows.
Note : My monitor's manufacturer is Dell
View 4 Replies
View Related
Jan 20, 2013
I just got a new laptop, a Lenovo X230, for which I paid extra to have the OS on it as Windows 8 Pro.
So--now I have it, and Win 8 Pro 64 is installed and activated on it. I am a legal owner of Win 8 Pro.
However, I would like to do a clean install of Win 8 on the computer, to have it free of bloatware, etc. (In fact, I would like to set up a multi-boot with Win 7, and perhaps even triple boot with Xp as well. (I have installation media and my product keys for XP and 7 though, so those are not really a problem.)
The computer came with no discs at all. There is a procedure to make recovery disks. I may do that, but I think those will be to restore the computer to how it came from the factory, and therefore not usable for a clean install.
I don't see my product key for Win 8 anywhere. Not on the computer, not on any kind of card that came with it, etc.
I looked at the tutorial here for clean install of Windows 8, but it requires an install disc and product key. I have neither, although I am a legal owner of Windows 8.
Is there a way I can create (from my installed Windows 8) a win 8 install disk, that can be used for a clean install? Or a link to download one? Is there a way I can get my product key?
View 9 Replies
View Related
Aug 19, 2014
I recently got a 2 slot card but seems to be 1 cm away from my wireless network adpater. When booting up, everything runs fine except I'm unable to connect to the internet. I'm wondering if the GPU is blocking the adapter. The GPU is running at 30 celcius
View 2 Replies
View Related
Sep 5, 2012
I have this usb 2 wireless adapter which worked fine on windows 7, ive just installed Windows 8 and have tried to install this WLAN adapter but its not working. It comes up in device manager as a usb 2.0 WLAN with drivers not installed but when I try and manually install them I just get The hash for the file is not present in the specified catalog file error
View 9 Replies
View Related
Dec 8, 2013
I have hidden all of the foreign language fonts that are Windows 8.1 system fonts. However, the hidden fonts continue to display in Office 2010, Adobe Creative Cloud and Corel Draw X6, as well as other programs and applications.
How do I prevent the fonts from displaying or better -- which ones can be deleted? Surely Windows will function in the U.S. without a Himalayan font loaded.
I've tried using a third party font manager, both NexusFont and Bitstream Font Navigator, but with no improved results.
View 2 Replies
View Related
Oct 17, 2013
Because it does not contain enough free space. Clearly I have enough free space... [URL] ....
What should I do? I want to do a dual boot, so I can keep Windows 7 in case I don't like 8.1...
I formatted and deleted that partition and I tried again with 201gb, and no luck. [URL] ....
View 6 Replies
View Related
Oct 18, 2013
I am trying to upgrade from windows 8 pro to windows 8.1 on a samsung laptop. The download completes and installation starts.
After a while the following message appears "you cant install windows on a usb flash drive with setup"
I am not actually trying to install to a flash drive. I contacted Microsoft and after 5 hours they said that I should connect to the internet with a cable and not by wireless in order to solve the problem (this didn't work of course and I had told them that it was an install problem and not a download problem).
View 2 Replies
View Related
Jan 27, 2014
Until very recently i was running Windows 8 with a 240 GB Sandisk SSD as a primary and a 2 TB Western Digital Green HDD as a storage. I decided to set up a RAID 1 setup so i purchased a second 2 TB HDD and installed it.
My intent was to run windows 8 off the 240 SSD as a primary and have a RAID 1 setup for my 2TB HDDs.
I learnt that my data configuration was set to AHCI. I decided to do a complete clean install and change the sata configuration in BIOS to RAID.
After successfully creating a RAID volume using my 2TB HDDs i proceeded to install Windows off my primary. I am however having difficulties in that it will not allow me to install windows on either drive.
View 3 Replies
View Related
Apr 24, 2014
Upgraded to Windows 8.1 from Windows store. Can't use refresh or reset anymore.
Installed Windows 8.1 trial. Can't use Windows 8 OEM key to activate it.
Attempted to install windows 8 from Microsoft site, so I could use my Windows 8 OEM key, however, won't accept key on site because it says it is not a retail key.
How can I get Windows 8 back on my computer, activated with my OEM key?
If I do that then I guess I can upgrade it again from the Windows store to Windows 8.1.
View 2 Replies
View Related
Jan 24, 2014
bought Win 8 for a Win 7 Dell laptop in Jan. 2013 and have happily used Win 8 for a year. I have a Win 8 backup disc and valid license key.
I decided to update Win 8 to the free Win 8.1 a few days ago and went ahead with the download and installation of Win 8.1. However, after a seemingly successful installation, set up and login, a simple reboot resulted in no longer being able to boot. I can boot to safe mode but cannot boot properly no matter what I do.
There is no specific error message when I reboot, the OS simply fails to reach the login stage and reboots again. It then opens the 'Failed startup' page asking if I wish to use advanced options or restart.I tried turning off all non-Microsoft software like AVG, Comodo, Samsung Keys, etc., but it didn't solve the issue.
I also noticed that Safe Mode boot fails when I attempt to boot to 'Safe Mode with Networking' but is successful when booting to simple 'Safe Mode' or 'Safe Mode with Command Prompt'. I have attempted to burn the Win 8.1 disc as described on this site but from a Win XP system which according to the download software is not possible and unfortunately I do not have access to another system.
View 4 Replies
View Related
Jul 16, 2013
I just found that 8 doesn't come with WMP what the heck is Microsoft thinking !! Music is really one of my passions and now I find I cannot play CD's with 8 -
View 9 Replies
View Related
Jul 10, 2014
I am having a hard time upgrading from windows 8 to 8.1, I have tried installing through the store, installing using the files downloaded by the store (copied them before they were deleted) and they all give me an error. The errors are as follows:
installer using key: This key does not work with this version of windows 8 (using Professional 64-bit, tried 8 and 8.1 key but neither work).
Installer using ei.cfg file: Setup failed to authenticate the product key (or similar, it is set to professional so this should not be an issue).
Store: just says setup failed.
The first time I tried updating, the installer froze and did not complete so I had to re-start, could this have something to do with the issue I am experiencing? My specs are as follows:
Windows 8 Professional 64-bit
2TB HDD
16GB DDR3 RAM
Nvidia Geforce GT545 with 3GB VRAM
Realtek AC97 onboard audio
Intel core I7 3.2ghz quad-core multi-thread processor
View 5 Replies
View Related
Sep 15, 2014
Recently I was trying to upgrade my Windows 8 Pro computer to Windows 8.1 Pro. But I had no working USB sticks so I thought I could make a NTFS partition into my hard drive and extract the Windows 8.1 Pro installation setup files on there. So when I restarted my computer, it booted up into the Windows 8.1 Pro installing setup but said that I needed to boot up into Windows and put the installation media back in. But I could not and just kept booting into the installation.
So I thought that if I delete the partition I could go back to Windows. So I did with DISK PART. Now when I restarted it, it now gives me "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER". I'm guessing that when I deleted that partition, there is unallocated space left and my computer is trying to read off that but not the Windows partition.
I have a Compaq computer ...
View 2 Replies
View Related
Apr 17, 2014
Currently running WinXP, meets all requirement for Windows 8. However, when I try to copy the ISO file to USB using Win7 DVD download tool to create a bootable USB device, the USB I'm trying to copy it to will not show up in the list of "Devices to Copy In".
I have tried this several times with 2 different USB drives, both 8GB, one with more than 4GB free and the another is completely empty. They both work perfectly well, but when I reach the screen with the list of devices to copy the ISO file on to (Step 3 of 4, Win7 USB/DVD Download Tool) they don't show up on the list despite re-inserting them and refreshing a couple hundred times. The only removable device that does show up is the Floppy Disk.
I am using the DVD is not an option, since my DVD player crashed last week and I don't have the time to get it fixed right now, and I'd really like to get Windows 8 installed as soon as possible.
View 2 Replies
View Related
Oct 23, 2013
I have a fairly new PC running Windows 8 and I can't seem to upgrade to Windows 8.1--There are a bunch of issues-
1. Can't connect to the Windows Store--tried everything here save the refresh, which I do NOT want to do.
2. Downloaded the 8.1 ISO and burned it to a disc--get the error message that 8.1 could not be installed--0x101-0x20017 error--tried installing with a clean boot, turned off antivirus suite, etc
3.sfc /scannow does not work.
So currently I'd like to forget about the store for the moment and continue updating from the downloaded ISO. I really do not wish to restore the computer and I have a lot of software I'd need to reinstall and this would take a long time.
View 9 Replies
View Related
May 12, 2014
I have problem about booting from usb. I will add a short video about what is going on when I am trying to boot from usb but first let me show you picture of my system information.
I have tried 2 different usb to boot and one of them is shown in boot page but not opened the other one act like it does not exist. First usb worked on 2 different computer. Second one haven't tried on an other computer. I am using Universal USB Installer which is recommended by Ubuntu to creat bootable USB.
NOT 1: I wrote "Ubuntu" bu I think problem is not realated with what kind of bootable OS has it in.
View 8 Replies
View Related
Aug 27, 2012
I just downloaded windows 8 prof from my msdn, and I made a bootable usb stick with WintoFlash and now when I am trying to install I get this message: Windows cannot open the required file D:/Sources/install.wim. The file may be corrupt or missing. Make sure all files required for installation are available, Error code: 0x80070570. I have looked into the usb stick but install.wim is just there. And I did a disk chek in wintoflash and it found this:
Found problems with source files.
Can't find file D:sourcesoot.wim
Can't find file D:sourcesidwbinfo.txt
Can't find file D:ootmgr
Can't find folder D:oot
Can't find file D:sourcesinstall.wim or file D:sourcesinstall.swm
Total errors: 5
View 6 Replies
View Related
