How to make usb bootable. I have done the following:
- Used "Rufus" as per tutorial to make UEFI Bootable USB Flash Drive
- used a software to test usb if bootable and it was.
- Set Secure Boot off
- Adjusted BIOS to boot usb (kingston) as primary.
I try restarting and nothing happens.
I have installed windows 8 on a windows 7 PC on a separate hard disk. But I am unable to get boot option at startup. Every time I have to select windows 8 boot disk from bios boot menu.
View 3 Replies View RelatedRecently I was trying to upgrade my Windows 8 Pro computer to Windows 8.1 Pro. But I had no working USB sticks so I thought I could make a NTFS partition into my hard drive and extract the Windows 8.1 Pro installation setup files on there. So when I restarted my computer, it booted up into the Windows 8.1 Pro installing setup but said that I needed to boot up into Windows and put the installation media back in. But I could not and just kept booting into the installation.
So I thought that if I delete the partition I could go back to Windows. So I did with DISK PART. Now when I restarted it, it now gives me "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER". I'm guessing that when I deleted that partition, there is unallocated space left and my computer is trying to read off that but not the Windows partition.
I have a Compaq computer ...
I got into BIOS and found a menu I've never seen before.
Add boot option.
Path to boot option.
Create.
The add boot option doesn't accept letters or numbers. Any input is 'out of range'.
Asus model X551M, has a 500 gig hard drive.
So, how do I get this to work ?
I have problem about booting from usb. I will add a short video about what is going on when I am trying to boot from usb but first let me show you picture of my system information.
I have tried 2 different usb to boot and one of them is shown in boot page but not opened the other one act like it does not exist. First usb worked on 2 different computer. Second one haven't tried on an other computer. I am using Universal USB Installer which is recommended by Ubuntu to creat bootable USB.
NOT 1: I wrote "Ubuntu" bu I think problem is not realated with what kind of bootable OS has it in.
I was having problems getting to the boot menu of my Lenovo G580 laptop earlier.
I figured out how to get the boot menu - But my only options are hard drive, LAN v4 and LAN v6 boot - Nothing about a disc. So I went into the BIOS boot priority menu and set disk to #1 - It still booted to my hard drive!
I have a Dell Inspiron 7720 Win 8 x64 PC which includes UEFI (described in Microsoft link below). However, UEFI is accessed on Win 8 from Settings Charm > "Change PC Settings". This requires that you have booted the system already. In case of a main disk crash, you need to boot from another drive, like a thumb drive.
During restart my Dell PC displays "F12 Boot Options" in lower right of screen during restart, but multiple presses of F12 during startup are ignored. Likewise when I try F1 or F2 during startup. So I have no way to specify an alternate boot drive.
I am thinking maybe my PC is defective, but also maybe I'm missing something. What is UEFI? - Microsoft Windows Support
Yesterday, after many, many problems with my computer, I finally decided to reinstall Windows 8.1 Pro onto my ASUS X200CA netbook. However, after backing up and reinstalling the OS, I found that when I tried to disable "Launch CSM" in my BIOS, all of my boot options would disappear and my laptop would continually boot into my BIOS. When I re-enabled "Launch CSM", the boot options would reappear - however, it had not included the "Option #1 - Windows Boot Manager" that I had seen in my other installation.
View 2 Replies View RelatedI've had Win 7 Pro on my laptop for over a year. I installed a 2nd hard drive to it recently and today I installed Windows 8 Pro on the 2nd hard drive. It's been a roller coaster of good & bad luck.
The first install went fine, until I tried to install the Windows 8.1 upgrade from the Windows store, then things went bad and I had to go into Windows 7 and eventually delete the Windows 8 volume and change it from MBR to GPT because of UEFI (no secure boot enabled). What a stretch of error messages telling me I can't install Windows 8 on the blank hard drive because it was or wasn't MBR or GPT, or the automagically made partitions weren't in the right order.
After spending over 7 hours twice in a row installing Windows 8, I finally find out that there's no boot option for Windows 7 anymore.
The only clue I have is to use a Windows 7 repair disk and use diskpart.exe and make the Win 7 drive "active" but that's a little foreign to me at this point.
I'm looking in Computer Management / Disk Management from within Windows 8.
Disk 0: SYSTEM D: 438 MB NTFS (lengthened from 199 MB with EaseUS because Acronis 2014 thought it too small while crashing), Healthy (Active, Primary Partition); Win 7 E: 930.98 GB NTFS Healthy (Primary Partition); HP_TOOLS F: 102 MB FAT 32 Healthy (Primary Partition)
Disk 1: 300 MB Healthy (Recovery Partition) {no letter}; 100 MB Healthy (EFI System Partition) {no letter}; C: 931.00 GB NTFS Healthy (Boot, Page File, Crash Dump, Primary Partition)
And several other external disks which don't deserve mention today.
Because it does not contain enough free space. Clearly I have enough free space... [URL] ....
What should I do? I want to do a dual boot, so I can keep Windows 7 in case I don't like 8.1...
I formatted and deleted that partition and I tried again with 201gb, and no luck. [URL] ....
First, some context: I have a Dell Inspiron 15R SE that came with Windows 8.
I've managed to get a working dual-boot system with Ubuntu 12.10. I can't remember exactly how I done that, but I remember that I had to disable secure boot. I think that the boot configuration those days was:
Secure boot: DisabledLoad legacy option rom: EnabledBoot list option: Legacy
This "configuration" worked perfectly for 6-7 months.
Then, one day (last week, can't remember the exact day), when I was using Windows 8 the computer crashed. I hard-rebooted and got this screen:
After executed boot-repair from a Ubuntu LiveCD dozens of times I've decided to eliminate Ubuntu temporarily and focus to get a system with Windows 8 working nice.
Then I used my recovery DVDs to recover the system. Yup, Windows has booted. But when I restarted first time I got the same error. Then I, digging a solution, pressed F12 after a reboot and got here:
The highlighted option allows me to boot into Windows 8. So I went to boot options (F2) and changed the following configuration:
Load legacy option rom: DisabledBoot list option: UEFI
Now I can boot directly to Windows without need to press F12.
But my objective isn't complete. I want to erase all Ubuntu entries from the seconds image and restore the legacy boot from the first imagem (because they worked before).
I did two things:
I erased all partitions related to Ubuntu (root partition and home partition).I created a Windows recovery disk (not a system recovery disk).
I used the recovery disk to run the automatic recovery procedure (I forgot the exactly name). I've runned it at least 10 times with no success. Then I went to command prompt to try the famous triad: bootrec /fixmbr, bootrec /fixboot and bootrec /rebuildbcd. Still, no solution.
After creating a UEFI bootable USB thumb drive with Rufus (using Windows 8.1 Enterprise ISO x64), for a Dell Optiplex 3010 (configured as UEFI only, no CSM, latest firmware version, Windows 8 installed), I didn't see a USB boot option, so I tried to add one manually. Unfortunately I erased the existing boot option (boot manager) by mistake. Although there were two boot options for PXE booting, the machine will not start anymore, even when there is an active WDS server on the network.
I also see Led's 2 and 3 lighting up, meaning according to the manual 'hardware ok but bios possibly damaged/corrupt'.
I understand I cannot start the machine from a bios boot disk because of GPT partitioning, and the UEFI USB boot disk I made might be corrupt (as it didn't show up as a boot option), however I don't understand why it won't boot from the PXE network card, as these boot options are still there.
I have installed Blue 8.1 on a separate drive in my system along side 8.0. When I restart the 8.0 boots unless I manually select the 8.1 drive in bios. How can I alter the Boot menu to add the option to boot from either OS?
View 3 Replies View RelatedLate last Fall I bought a new Desktop, an HP H81414, with Windows 8 installed with the intention of installing Windows 7 on an SSD. I migrated Window 8 to an SSD, removed that from the system, installed new SSD and put Windows 7 on it. Both worked fine. I wound up with 2 SSD's. capable of running on the EFI BIOS machine with Secure Boot turned off. I later bought a new laptop with Windows 8. I found the Win 8 with Classic Shell to be very acceptable.
What I would like to do now ,if possible, is to mount both SSD's in the HP case and switch to either one of them at boot.
I had windows 7 running on my computer. When windows 8 came out I used a second harddrive as the windows 8 installation drive. Windows 8 automatically setup a dual boot system where every time I started the computer it took me a windows screen where I could select either windows 7 or windows 8. This has been going on since Windows 8 was released.
I decided it was getting old so I decided it was time to remove the old windows 7 harddrive. I tried doing it inside the windows 8 dual boot screen but could not find an option. So I decided to reformat the windows 7 harddrive. I did this in command prompt mode. After doing so when my computer restarted it said it could not find any harddrive to boot. Windows 8 is installed on the other harddrive, the one that was not reformatted. So how do I get it to start using that harddrive as the boot drive? I checked my bios and even physically disconnected the old HD that had windows 7 on it, but none of that seemed to work even though the Windows 8 HD is definitely in the boot order in the bios.
Upgraded to Windows 8.1 from Windows store. Can't use refresh or reset anymore.
Installed Windows 8.1 trial. Can't use Windows 8 OEM key to activate it.
Attempted to install windows 8 from Microsoft site, so I could use my Windows 8 OEM key, however, won't accept key on site because it says it is not a retail key.
How can I get Windows 8 back on my computer, activated with my OEM key?
If I do that then I guess I can upgrade it again from the Windows store to Windows 8.1.
I have Windows 7 64 bit Ultimate installed and activated. I am trying to upgrade to Windows 8 and the upgrade assistant tells me it needs at least 2gb when I have 8gb and Windows 7 sees and knows I have 8gb
I am thinking it could be my bios, but it's already at the latest version
Here are some photos from my bios, so you can tell me if there is anything I need to enable.
These are photos from my bios. I need to change to get this to work.
bought Win 8 for a Win 7 Dell laptop in Jan. 2013 and have happily used Win 8 for a year. I have a Win 8 backup disc and valid license key.
I decided to update Win 8 to the free Win 8.1 a few days ago and went ahead with the download and installation of Win 8.1. However, after a seemingly successful installation, set up and login, a simple reboot resulted in no longer being able to boot. I can boot to safe mode but cannot boot properly no matter what I do.
There is no specific error message when I reboot, the OS simply fails to reach the login stage and reboots again. It then opens the 'Failed startup' page asking if I wish to use advanced options or restart.I tried turning off all non-Microsoft software like AVG, Comodo, Samsung Keys, etc., but it didn't solve the issue.
I also noticed that Safe Mode boot fails when I attempt to boot to 'Safe Mode with Networking' but is successful when booting to simple 'Safe Mode' or 'Safe Mode with Command Prompt'. I have attempted to burn the Win 8.1 disc as described on this site but from a Win XP system which according to the download software is not possible and unfortunately I do not have access to another system.
I have recently attempted to reset my laptop to factory and i get this issue
Computer specs:
Asus VivoBook S550CM 8gb Ram
I own a Lenovo Y580 Ideapad that came with Windows 8 preinstalled, so I was never given a license key or CD, and I am trying to use the SSD as my main drive by doing a clean install of Windows 8 there and then copying over any other files I want from my HDD.
I downloaded a Windows 8 iso file and verified the hash so I know it was a clean file. I burned that iso to a flash drive using Rufus, following all of the instructions in this post: UEFI Bootable USB Flash Drive - Create in Windows
When I attempted to boot from the flash drive my computer would hang at the Lenovo start up screen (black screen with Lenovo written on it) and then start flashing on/off every 5 seconds for a minute or two and then hang at the start up screen once more indefinitely. It would not let me F2 to BIOS when I turned it on or F12 to Boot device selection.
So, I formatted the flash drive and then followed this post: Create Bootable USB or DVD with Windows 8 ISO Once again, no dice. Same problem. I tried putting my HDD as the very last boot option, enabling Legacy boot mode, etc etc but still haven't been successful. The iso I used was an x64 Windows 8 (core I believe? Just regular). I am currently downloading the 8.1 iso to see if that will work.
I just found that 8 doesn't come with WMP what the heck is Microsoft thinking !! Music is really one of my passions and now I find I cannot play CD's with 8 -
View 9 Replies View RelatedI have a 256gb ssd installed on my laptop and I recently had installed Ubuntu partition on it and ended up removing it. I have instead reinstalled a fresh copy of Windows 8. However I see no other partition during the installation processing and it's saying I only have 238gb available not my disk's full 256gb. So far I tried chkdsk and disk management and it failed to see any other used space.
View 9 Replies View RelatedI am having a hard time upgrading from windows 8 to 8.1, I have tried installing through the store, installing using the files downloaded by the store (copied them before they were deleted) and they all give me an error. The errors are as follows:
installer using key: This key does not work with this version of windows 8 (using Professional 64-bit, tried 8 and 8.1 key but neither work).
Installer using ei.cfg file: Setup failed to authenticate the product key (or similar, it is set to professional so this should not be an issue).
Store: just says setup failed.
The first time I tried updating, the installer froze and did not complete so I had to re-start, could this have something to do with the issue I am experiencing? My specs are as follows:
Windows 8 Professional 64-bit
2TB HDD
16GB DDR3 RAM
Nvidia Geforce GT545 with 3GB VRAM
Realtek AC97 onboard audio
Intel core I7 3.2ghz quad-core multi-thread processor
Here: [URL] .....
Somewhere in that link it says:
During POST enter "BIOS Boot Selector Menu" by pressing F7.
Intel says: <F7> No uefi setup option in boot selection
Others say: <F8> No uefi setup option in boot selection
I say: <F12> No uefi setup option in boot selection
Lenovo Z580, my brand new laptop that is, its UEFI based and vymrdal's ISO from MSDN is also created to be installed as an UEFI Install.
I get as far as " a driver is needed to continue installation" not found, make sure its on the right media. Here is what i got done on my own..
1- BIOS setting "legacy" and U E F I" boot from USB.
2- F 9 to choose boot order.. selected USB device
3- Installation starts for WIN 7
4- Driver is needed to continue, and i have no clue what it is..some one pointed me to . f 6 f l p y-x 64 because its an HP Envy...
5- Driver not found / wrong driver..
6- Shut down restart.......................
My DVD is Windows 7 ultimate X 32, X 64..
No matter what i cant boot form my USB /U E Fl /WIN 7 pen drive.seems like its not recognized or drivers for the USB chip set not installed.. Of course using the O E M DVD of win 7 fails. because of the G P T style.
After a upgrade from Windows 8 to Windows 8.1, I seem to have lost my ability to use the recovery partition. Every time I go and use it I get an error message Unable to reset your PC. A required drive partition is missing.
I have contacted ASUS for recovery DVD's however I was told to go to a authorized repairer to have it fixed for a fee. My last laptop was able to burn recovery DVD's but not this one.
I understand that Windows 8.1 creates a new recovery partition for itself however I did read on this forum it is possible to get it back to default settings.
Windows Recovery Environment (Windows RE) and system reset configuration
Information:
Windows RE status: Enabled
Windows RE location: ?GLOBALROOTdeviceharddisk0partition2RecoveryWindowsRE
Boot Configuration Data (BCD) identifier: ba08d678-3e5b-11e2-b26a-a34ba04e3737
Recovery image location: ?GLOBALROOTdeviceharddisk0partition5RecoveryImage
Recovery image index: 2
Custom image location:
Custom image index: 0
Partition ### Type Size Offset
------------- ---------------- ------- -------
Partition 1 System 300 MB 1024 KB
Partition 2 Recovery 900 MB 301 MB
Partition 3 Primary 372 GB 1201 MB
Partition 4 Recovery 350 MB 373 GB
Partition 5 Recovery 20 GB 373 GB
Currently running WinXP, meets all requirement for Windows 8. However, when I try to copy the ISO file to USB using Win7 DVD download tool to create a bootable USB device, the USB I'm trying to copy it to will not show up in the list of "Devices to Copy In".
I have tried this several times with 2 different USB drives, both 8GB, one with more than 4GB free and the another is completely empty. They both work perfectly well, but when I reach the screen with the list of devices to copy the ISO file on to (Step 3 of 4, Win7 USB/DVD Download Tool) they don't show up on the list despite re-inserting them and refreshing a couple hundred times. The only removable device that does show up is the Floppy Disk.
I am using the DVD is not an option, since my DVD player crashed last week and I don't have the time to get it fixed right now, and I'd really like to get Windows 8 installed as soon as possible.
Windows 8 clean install crashes on first screen
Side note - I succeeded on installing Windows 8 on that particular laptop using UEFI, but NOT legacy. No matter what I tried it failed.
Its a HP Envy laptop with a 1TB HDD running on windows 8. But the laptop has been having a lot of start-up errors and finally some files corrupted and windows wouldn't function properly. So I decided to reformat it to 8.1, a complete wipe to get rid of all the pre-installed HP crap.
So here's what I've tried, in the same order.
> I tried to install windows 8.1 through windows 8. -It failed after it restarted-
> I tried to install windows 8.1 through USB ontop of the Windows Partition (There were 5 partitions). -It failed because of a GPT (If I remember correctly) Partition error-
> I decided to delete all the partition and install Windows 8.1 ontop the entire 1TB disk space. -It started installing but then failed with an error code 0x80070057-
> I tried diskpart through CMD to clean the disk drive then followed with a format to ntfs -It always just sticks on 0 percent%-
> I tried all the same steps with Windows 7 -The exact same errors happen-
I've got one last option, plug the HDD into my desktop and try to format it that way but this is a lot of work so I'd like to keep it as a last resort.
Alright, so my ASUS laptop has been getting a little slow lately, so I decided to reinstall. Now I know my PC has an ASUS recovery partition, which reinstall the pc with all the tools, drivers etc, since I've used it before. But now when I restart the computer and press F9 and reset, it doesn't work. This is what I do:
This is where it was supposed to give me the option to restore whole drive or just install windows to the primary partition. But now it asks for a CD, which I don't have. This PC never used to have a recovery CD, just a recovery partition.
Then, I read somewhere I could do the same from inside Windows 8, so I tried that as well by going to the charms bar, then Settings and then "Change PC settings". Then I selected "Update and recovery" from the left, and then went to Recovery, where I pressed the button to remove everything and reinstall windows. This is what I got:
So, I tried to see if EaseUs Partition manager showed the recovery partition. I started ASUS and these are the partitions it found:
I saw it found both a "Recovery" partition and a "Restore" partition. Now I assume the Recovery partition is the one Windows 8 boots into, and the Restore partition is the one created by ASUS. So, these are the contents of the Recovery partition:
And these are the contents of the Restore partition:
As you can see outlined in red, it does contain an install.wim file, so I know the recovery data is there. However the Windows 8 recovery environment just isn't able to find it.
I was using Ubuntu 14.04 on my laptop before. Now I want to install Windows 8. I have laptop's rescue CD. I get the following error when I tried to install Windows 8 on UEFI using the rescue CD:
"Unable to reset your pc a required partition is missing".
I think I have a problem about partitions type because Ubuntu uses ext4.