Hardware Drivers :: A Reboot Is Required To Complete Device Installation
Jan 27, 2014
I have a windows 8 laptop and a linux desktop, both connected to the same screen using hdmi - since my screen has only 1 HDMI input, I use an HDMI splitter.
Every time I move from the linux to the windows 8 laptop (using a HDMI mini remote control), I get a message from windows saying that in order to apply these changes I need to reboot.
Note that I also use the same wireless keyboard and mouse for both computers - each time I change from one computer to the other, I unplug the USB that controls them and plug it in the computer I will use.
I think that the problem is related to the HDMI, not the keyboard/mouse usb - but I am not sure.
Needless to say that it is very annoying and I cant keep restarting the LT each time I move from one to the other.
I checked event viewer to see what causes this and these are the relevant messages:
1 - Device 'USBVID_045E&PID_0745&MI_017&1a5cec9a&0&0001' requires installation.
Microsoft-Windows-Kernel-PnPConfig/Configuration
Kernel-PnPConfig
Event id: 3
2 - A reboot is required to complete device installation of device 'USBVID_045E&PID_0745&MI_017&1a5cec9a&0&0001'
Microsoft-Windows-UserPnp/DeviceInstall
UserPnp
Event id: 8000
how I can fix this, make it stop requesting reboots?
View 7 Replies
ADVERTISEMENT
Sep 15, 2014
I'm having an issue with a pc I am fixing. I reflowed the gpu and removed some viruses but now every time I restart the pc I get this message which I can fix with the installation media. But every time i fix it, once I turn the computer off again after using it normally for whatever amount of time, when I turn it on again, i get the blue screen again. What's causing it to happen every time?
View 2 Replies
View Related
Sep 15, 2011
I am trying to install the new develp build of Windows 8 (x86) on my asus eeepc 1005pe. This is a netbook which doesnt even have a cd/dvd drive.
So anyway, I extracted the iso on a bootable usb flash drive. I boot, and when I click install it just hangs for about 10 minutes and then it gives me this error:
I tried setting the bios from AHCI to IDE. This does not work, I even get a bluescreen of death when I boot up in the current win7 sp1 install. But anyway on google I read a lot about this problem and one of the solutions is to put it on AHCI.. but not for me as it was already on AHCI. Anyway IDE is not workin either.
Just recently I installed win7sp1 on this netbook without a problem. I checked the sha1 hashes of the Windows 8 ISO and they are confirmed, so that is not the problem either.
View 9 Replies
View Related
Mar 2, 2014
Since upgrading my HP DV6T7000-CTO from Windows 7 to Win 8 and now 8.1I have had an intermittent issue where the my wifi/bluetooth adapter is detected, until a restart, and then afterwards, is no longer detected. I have a Intel centrino wireless N 2230 which is both wifi and bluetooth. I cannot connect to wifi, nor is the bluetooth detected. Additionally, the wifi-radio button on my laptop, will not turn on (red is off, white is on). Sometimes I can temporarily fix the issue by shutting down,disconnecting the adapter from my laptop, reseating it, and then rebooting. This does not always work though.
I have tried the latest drivers from Intel as well as tried removing those and just installing whatever Windows update thinks is best. I have also updated the Bios to the latest, but to no avail. I have even replaced the adapter with a new adapter but the same model and that did not fix the issue either.
View 2 Replies
View Related
Jun 2, 2014
Windows 8 has been acting up recently, every now and again my computer will blue screen and restart with the message
error-code-0xc000000f-windows-8-a-required-device-isnt-connected-or-cant-be-accessed
So far I have noticed that if you leave the computer off for a while or change the hard drive to a different sata port it will work fine for a while then do the same thing.
Also I have done a full clean install with windows 8 and the same issue has occured a couple of days later.
I have a feeling its the hard drive going bad but how can i be sure? Some hard drive utilities have reported "end to end error - fail" but others have said there is no issues.
View 2 Replies
View Related
Aug 17, 2014
I am running Windows 8 on an Asus laptop. Two days ago it was doing updates and restarting. It did this 3 times, and on the third restart I received the blue error screen. It stated
"Recovery. Your pc needs to be repaired. A required device isn't connected or can't be accessed. Error code: 0xc0000225
You'll need to use the recovery tools on your installation media. If you don't have any installation media [like a disc or usb device] contact your system administrator or Pc manufacturer."
It gives me three options at the bottom [press enter to try again, press f8 for startup settings, press esc for uefi firmware settings]. If I press enter I get the same screen just with a bit more text. f8 does nothing. Uefi takes me to the boot menu. I have been trying to boot from a dvd r with a flash operating system in order to recover my data before it is reformatted. However, it does not seem to recognize the disc. When I select to boot from dvd rom, it tries, then on the black screen appears text saying restart and select boot device or install boot media and press a key. I tried taking disc out and putting bavk in, then pressing a key, nothing, same message.
View 10 Replies
View Related
Aug 6, 2013
My computer rebooted and then started coming up with the message: 'Reboot and select proper Boot device'
Now from what I understand this means that the computer is unable to detect a boot-able OS. I am silly and haven't yet created a windows recovery disk or flash drive.
However my question is, is there a way I can get a recovery utility of some kind off the net so that I can get the computer to detect the boot-able OS ?
View 9 Replies
View Related
Aug 17, 2014
I have a a Toshiba Satellite P55t with windows 8.1. Today I used the Toshiba Password utility to set a User password, Rebooted the machine and got a "reboot and select proper device" error. Hitting F12, F2, Esc, nothing works. Putting the recovery DVD in does not work.
View 9 Replies
View Related
Jan 16, 2013
My employer is starting to look at Windows 8 for our tablet PCs. Currently we only have 1 model, its the Dell Latitude ST and are using Windows 7 on them. I am trying to create and customize an automated install of Windows 8 for our Latitude ST's.
I've used MDT to capture a Windows 8 Enterprise 32bit image and can image Latitude tablet from thumb drive just fine. In image I copied (not installed) driver files to my WIM file. My unattend.xml file works fine, am not getting any prompts once booting into image on my Latitude ST's.
The problem I am having is Windows Setup is not installing any Latitude device drivers. I copied the device drivers to C:WindowsINFLatitudeST folder and in it is a folder for each device (i.e. Network folder contains all driver files for NIC). I see in the registry that the device path is set to %systemroot%INF so I think I have correct location for parking the driver files. I'm assuming that Windows 8 will search all files/folders in C:WindowsINF for correct INF file. I even tried copying the actual network driver files to C:WindowsINF thinking the system should see it and then install drivers (incase it didn't search for sub folders). To make sure I have Windows 8 supported drives, I downloaded latest driver and still don't work. Everything I try I just cannot get device drivers to install during setup.
Once I am in OS, I can go to device manager, see devices that are unknown, then manually install drivers pointing to the C:WindowsINFLatitudeST folder. Manually works, automated don't.
On Windows 7 Pro 32bit OS, I don't have a problem. The Windows Setup will search C:WindowsINF and find all the correct device drivers for the Latitude ST tablet and install them during setup.
Why cannot I get drivers to install during setup?
View 2 Replies
View Related
Feb 8, 2014
Last part of the message, (Device Descriptor Request Failed). I get this, in Device Manager, and I have searched for an answer on the net. Also it is a Code 43. I went through my laptop, with an HP Technician this morning, I might add at a cost of 5p/minute, for 30 odd minutes. He has said that because I had gone over to Windows 8.1 and the recovery discs I made will not load, to put back in Windows 8. I have to send the laptop back for re-installing the OS, because Windows 8.1 do not have the update for my problem. Also the R.H. USB socket has a failure ID:0GAPTK-6T7716-MFPWWK-8D1Q03. I personally think that this is all what the problem is. a duff USB. Is this a cop-out???
Does Windows 8.1 having driver WHQL problems?
I only found out the problem with the usb when I tried to download a Mobi file to a Kindle for my wife. The other usb's work OK.
View 9 Replies
View Related
Apr 17, 2014
when look in the device manager i get this:
[URL]
and PCI Device above this to unknown device ( i took this photo from google)
when i try to delete it back after restart or Scan hardware change
lenovo ThinkPad Edge E540 20C6006JIV win 8.1
View 9 Replies
View Related
Jan 19, 2014
A friend just got a Fujitsu FMVA53MB ultrabook. He and I went through the install and chose "No McAfee" on the initial, pre-Windows screen. Once in Windows, after figuring out 8.1 :-( when he clicked on the "Office" tile, he got a pop-up box that said his installation of McAfee was not complete, showed us how to complete the install, and had just a "Stop Installation" button.
View 2 Replies
View Related
Feb 8, 2014
Got a mates computer that would not boot normally, so button mashed f8 to bring up safe mode, uninstalled the crap, ran an antivirus and checked for registry errors with an outdated reg cleaner, there were heaps of errors which I could do nothing about as I had no internet at the time, so I decided to do a complete reset of the PC through the f8 boot menu.
It went fine until I woke up the next morning to find that when it boots all I get is the error message at the toshiba boot screen saying "Windows could not complete the installation. To install windows on this computer, restart the installation" there is no mouse pointer so I smash enter, it restarts and does exactly the same thing on next startup. I can't seem to get f8 to work after the reset and I'm stuck!
View 5 Replies
View Related
Jul 13, 2013
I will need to do a complete system recovery. My computer originally came with windows 7 and then downloaded and installed windows 8. I have my product key. When I downloaded windows 8 it gave me the option of burning a copy of windows 8 to a dvd, however I did not do that. Whenever I do a system recovery will I be able to get windows 8 back without having to pay for another download?
View 6 Replies
View Related
Jun 14, 2013
This is the error I am getting when I start my laptop. "Windows could not complete the installation. To install windows on this computer , restart the application"...
Windows 8 64 bit , Dell Inspiron 3521 , 1GB graphic card 7670m , intel 4000 series, 4GB ddr3ram, i5-3337u 3rd generation
Just bought it 1 week back , and I didn't back up the recovery partition and i did not got any recovery disc or installation cd with the laptop.
I tried to restore the system and was confused and selected recovery option, in dat I selected reset your pc, it didn't asked for any windows installation disc or back up disc and it took 30mins to complete and asked to restart ...after that I am getting this option .
View 2 Replies
View Related
Jul 19, 2014
I was using Ubuntu 14.04 on my laptop before. Now I want to install Windows 8. I have laptop's rescue CD. I get the following error when I tried to install Windows 8 on UEFI using the rescue CD:
"Unable to reset your pc a required partition is missing".
I think I have a problem about partitions type because Ubuntu uses ext4.
View 2 Replies
View Related
Aug 27, 2012
I just downloaded windows 8 prof from my msdn, and I made a bootable usb stick with WintoFlash and now when I am trying to install I get this message: Windows cannot open the required file D:/Sources/install.wim. The file may be corrupt or missing. Make sure all files required for installation are available, Error code: 0x80070570. I have looked into the usb stick but install.wim is just there. And I did a disk chek in wintoflash and it found this:
Found problems with source files.
Can't find file D:sourcesoot.wim
Can't find file D:sourcesidwbinfo.txt
Can't find file D:ootmgr
Can't find folder D:oot
Can't find file D:sourcesinstall.wim or file D:sourcesinstall.swm
Total errors: 5
View 6 Replies
View Related
Dec 27, 2012
I bought a new SSD and want to do a clean install on it, however am having problems during the install process and receive the following message:
Windows 8 cannot install required files. Make sure all files required for installation are available, and restart the installation. Error code: 0x8007025d
The install images was downloaded from the Microsoft website and I have tried using a USB thumb drive and DVD install disc and both receive the same error. I have used the DVD disc when I originally installed Windows 8 Pro on the same desktop but on an IDE harddrive and believe the disc should still work (i.e. no scratches on it).
Here's how I prepared to install:
1. Unplugged all harddrives except for brand new SSD (Crucial M4 128 GB SSD)
2. Changed bios settings to AHCI (before was on IDE) (using Asus P5k-V motherboard)
I'm not sure what's going on if the harddrive is corrupt, the bios settings need to be tweaked, the drive is incompatible with my motherboard or something else.
I don't want to go back to using the IDE drive to boot windows but rather use the new SSD.
View 9 Replies
View Related
May 12, 2014
One of our software providers has instructed us to make some changes to our Win 8 PC's registry to get the software to work properly. They have sent me details of what changes are required:
Open Windows Registry Editor (Regedit)
Right click HKEY_CLASSES_ROOT - click PERMISSIONS - click ADVANCED
Click/Check: REPLACE ALL CHILD OBJECT PERMISSION ENTRIES WITH INHERITABLE PERMISSION ENTRIES FROM THIS OBJECT
Double click the entries: USERS, CREATOR and ALL APPLICATION PACKAGES
For each entry:
TYPE: Select Allow Applies to: Select This key and subkeys
Click/Check: Full control and Read
Click OK on Entry detail screen
Click OK on Entries list screen
I know very little about Windows Registry other than not to touch it. These changes seem quite extreme.
View 3 Replies
View Related
Apr 13, 2014
I recently purchased an Asus X551 laptop with Windows 8 but straight the way uninstalled Windows 8 and installed Ubuntu (after creating a Windows 8 recovery drive just in case). I have since decided that I want Windows 8 back as I have found that I cannot use a lot of software on Linux. The laptop did not come with any form of recovery disk or installation disk, the only reminent of Windows 8 I have is the recovery USB that I created from within the OS.
When I plug in the USB and boot from it it brings up the recovery menu with options to reset the PC but when I click it it says something like - "Unable to reset PC. A required partition is missing".
View 3 Replies
View Related
Jun 1, 2014
I have an ASUS VivoBook X200CA that is running a Windows 8.1 Upgrade. For about 5 months, this laptop has been running perfectly without any problems and I have managed to reset the computer many times due to certain errors and problems that have arisen from software and hardware compatibility.
Recently, I went to reset my laptop, it restarted and then it took me to the WinRE screen. I went into Troubleshooting > Advanced Options and I clicked on the Reset option. It then took me through each of the various warnings and making sure that my data was backed up and then, once I had clicked on the "Reset" button, it hung for a bit and then said "Reset has failed - Required Partition is Missing".
View 9 Replies
View Related
Jan 14, 2013
I just finished building my computer. Clean SSD and HDD.
I boot on USB with Win 8 in it.
I go through with it, installing on partitioned first and after failing that on unallocated space.
Both ways result in the installer preparing files, going through everything fine. Then at the end of that window my computer restarts and starts the whole set up all over again.
I can install Windows 8 in my SSD, right?
View 2 Replies
View Related
Jan 17, 2014
I am unsure whether I should enable "Automatically get device drivers, apps, and info for new devices" when installing Windows 8 Pro?
What exactly will it do?
If I enable this, will Windows then automatically install software packages/drivers from the manufacturer, like for example the Logitech Setpoint software for their keyboards and mouse and similar software for other devices? I don't want or need that. Or will it behave like in Windows 7?
On my other PC with Windows 7 I see in Windows Update that there are a couple of optional updates, including that Logitech stuff, as well as some driver for a BenQ monitor I have and also nvidia video drivers. This kind of stuff I don't want or need installed automatically as important updates in Windows Update - so I am worried if enabling this automatic driver stuff in Windows 8 is different than Windows 7? Meaning that it will get installed secretly/automatically?
However, it's fine that Windows finds them so I can manually go and check if I want to install any of it.
The key is that the updates are optional in Windows 7, but I have seen a few people complain about Windows 8 installing stuff like video drivers and mouse drivers automatically.
View 2 Replies
View Related
Jul 22, 2014
I've installed Microsoft Windows 8.1 Version 6.3.9600 Build 9600 on my HP 430 Notebook PC with 1 GB RAM and Pentium CPU @ 2GHz 2 Cores.
Display drivers are not working properly (i.e., everything appears bigger and unclear), earlier I'd successfully updated the display drivers and made it work using Device Manager. making a backup of the drivers (may be in .inf format) from the installed drivers so that I don't have to update it every time I re-install it.
View 7 Replies
View Related
Sep 15, 2014
I'm running a custom build PC on which I clean installed a (legal) copy of Windows 8.1
My system works fine except it can not install drivers for ANYTHING non-standard. Keyboard, mouse, memory sticks, HDDs all work fine, however when I plug in my phone/tablet/camera etc via USB, it fails to install drivers and I can't use my device.
Here's what device manager looks like with my (android) phone plugged in
And when I select Update driver software, I get this error:
View 9 Replies
View Related
Aug 24, 2014
Every single time I reboot my system my mouse fails to register in the system. I have to physically unplug it and plug it back in for Windows 8.1 to register it. Once I do that I have literally no issues at all..... How to fix this so it doesn't happen every single time I reboot?
View 1 Replies
View Related
Jan 24, 2014
bought Win 8 for a Win 7 Dell laptop in Jan. 2013 and have happily used Win 8 for a year. I have a Win 8 backup disc and valid license key.
I decided to update Win 8 to the free Win 8.1 a few days ago and went ahead with the download and installation of Win 8.1. However, after a seemingly successful installation, set up and login, a simple reboot resulted in no longer being able to boot. I can boot to safe mode but cannot boot properly no matter what I do.
There is no specific error message when I reboot, the OS simply fails to reach the login stage and reboots again. It then opens the 'Failed startup' page asking if I wish to use advanced options or restart.I tried turning off all non-Microsoft software like AVG, Comodo, Samsung Keys, etc., but it didn't solve the issue.
I also noticed that Safe Mode boot fails when I attempt to boot to 'Safe Mode with Networking' but is successful when booting to simple 'Safe Mode' or 'Safe Mode with Command Prompt'. I have attempted to burn the Win 8.1 disc as described on this site but from a Win XP system which according to the download software is not possible and unfortunately I do not have access to another system.
View 4 Replies
View Related
Jul 22, 2013
All, I have been experiencing big problems with Windows 8 Pro. I had been running the OS on a 120GB SSD up until a week ago with no problems until the following started happening:
Windows 8 started to reboot in a continuous loop with the following error message: Your PC ran into a problem and needs to restart. Error code 0cx000021a.
It would then put itself into System Repair mode, but was unable to fix itself. It then booted to the System Repair screen and so I attempted the following in order:
Tired to run System Restore, failed
Tried to System Repair, failed
Tried to System Refresh, failed
Tried to System Reset, failed.
After running System Reset and failing, it rebooted and I was left with 'There is no operating system installed on this device'.
As the version of Windows 8 I have is an online-only installation I then went back into my original order and ordered the accompanying Windows 8 recovery disk. Several days later the disk arrived and I attempted to run a windows 8 re-install from the disk. I followed the onscreen instructions and thought great, this is going to work. However first time, 'Getting files ready for installation' got to 57%, then I received the following error: Windows cannot install required files. The file may be corrupt or missing. Restart the installation. Error code 0x80070570
So I completely formatted the SDD, deleted partition. Created new partition. The second time, 'Getting files ready for installation' got to 82%, then as before: Windows cannot install required files. The file may be corrupt or missing. Restart the installation. Error code 0x80070570
At this point I turned off the PC. How I can turn my now brick of a performance PC back into a working system?
View 2 Replies
View Related
Jun 16, 2014
I am having an issue where, with my laptop lid closed because I use my monitor, when I reboot my laptop it never actually comes back on. If I remember to open the lid in advance, there is no issue.
I have my settings set that when my laptop lid is closed, nothing happens.
View 5 Replies
View Related
Mar 13, 2014
This is a Windows 8 OEM CD install, on an i7 x64 system. I have tried this with both UEFI and legacy modes.
I cleaned the drive and allowed setup to partition and format how it sees fit on an Intel SSD.
The system copies files, sets them up and reboots.
The blue windows logo is up for a minute, then the screen (not the PC) power cycles (probably due to a resolution change). It hangs there on a black screen. There is a mouse cursor that responds and the num lock toggles on the kb, but nothing else. CTRL-ALT-DEL does nothing.
View 2 Replies
View Related
Jul 24, 2014
I am trying to install Windows 8.1 onto a new PC a clean install. I boot from UEFI CD/DVD Drive with the windows 8.1 install disk in it and it gets to the "Press any key to continue" screen, I press a key and it just restarts my computer. Then I try to boot from just regular CD/DVD Drive it says Missing BootMGR.
View 9 Replies
View Related
