Every single time I reboot my system my mouse fails to register in the system. I have to physically unplug it and plug it back in for Windows 8.1 to register it. Once I do that I have literally no issues at all..... How to fix this so it doesn't happen every single time I reboot?
View 1 RepliesI set up cursors for the mouse pointers and save the changes, then the next time I reboot they revert back to the default settings. Is this just Windows 8?
View 9 Replies View RelatedInstalled windows 8.1 preview last night and after installing i get stuck at the lock screen, cant click or punch keys to log in. Since the powers that be decided to change how you boot into safe mode is my only option to format?
View 3 Replies View RelatedThe only thing that has changed is that I upgraded my OS recently.
I have an 2.4 GHz Wireless Laser Mobile Mouse. Originally after the upgrade, the left button caused right clicks and vice versa. I found a workaround by changing the Windows 8 settings to "Right Primary Button" while in the control panel, the device is configured for the left hand. If I select "Left..." and right respectively, I get the reverse. The scroll wheel also does nothing when clicked. Sometimes when I read articles I click it so I can move my mouse up and down to scroll the page without pushing any keys.
I have tried uninstalling and reinstalling the mouse driver and HID driver with no luck.
I have a windows 8 laptop and a linux desktop, both connected to the same screen using hdmi - since my screen has only 1 HDMI input, I use an HDMI splitter.
Every time I move from the linux to the windows 8 laptop (using a HDMI mini remote control), I get a message from windows saying that in order to apply these changes I need to reboot.
Note that I also use the same wireless keyboard and mouse for both computers - each time I change from one computer to the other, I unplug the USB that controls them and plug it in the computer I will use.
I think that the problem is related to the HDMI, not the keyboard/mouse usb - but I am not sure.
Needless to say that it is very annoying and I cant keep restarting the LT each time I move from one to the other.
I checked event viewer to see what causes this and these are the relevant messages:
1 - Device 'USBVID_045E&PID_0745&MI_017&1a5cec9a&0&0001' requires installation.
Microsoft-Windows-Kernel-PnPConfig/Configuration
Kernel-PnPConfig
Event id: 3
2 - A reboot is required to complete device installation of device 'USBVID_045E&PID_0745&MI_017&1a5cec9a&0&0001'
Microsoft-Windows-UserPnp/DeviceInstall
UserPnp
Event id: 8000
how I can fix this, make it stop requesting reboots?
Since upgrading my HP DV6T7000-CTO from Windows 7 to Win 8 and now 8.1I have had an intermittent issue where the my wifi/bluetooth adapter is detected, until a restart, and then afterwards, is no longer detected. I have a Intel centrino wireless N 2230 which is both wifi and bluetooth. I cannot connect to wifi, nor is the bluetooth detected. Additionally, the wifi-radio button on my laptop, will not turn on (red is off, white is on). Sometimes I can temporarily fix the issue by shutting down,disconnecting the adapter from my laptop, reseating it, and then rebooting. This does not always work though.
I have tried the latest drivers from Intel as well as tried removing those and just installing whatever Windows update thinks is best. I have also updated the Bios to the latest, but to no avail. I have even replaced the adapter with a new adapter but the same model and that did not fix the issue either.
I've tried three mice, Logitech G400, Razer Deathadder 3.5 and a random Logitech wireless but the problem remains.
I haven't found any coincidents when i run a specific program or game. Sometimes it goes a day or two without incident and sometimes multiple times a day. I have run several Malwarebytes Anti-Malware and Avast scans but they did not find anything.
I have also ran a "sfc /scannow" and the "DISM.exe /Online /Cleanup-image /Restorehealth" to fix. I have tried the current drivers for every mouse, tried without drivers and tried to uninstall all drivers all let Windows install them itself.
My specs:
Windows 8.1 Pro 64-bit
System Manufacturer: Acer
System Model: Aspire 5750G
BIOS: InsydeH2O Version V1.21
Processor: Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz (4 CPUs), ~2.3GHz
DirectX Version: DirectX 11
Graphics:
GeForce GT 540M
Driverversion: 327.23
Card name: Intel(R) HD Graphics 3000
Manufacturer: Intel Corporation
Chip type: Intel(R) HD Graphics Family
On a new custom built desktop, running Windows 8, I am having the annoying problem with the mouse lagging or sticking on the screen. It can do this differently at times, depending on what program I am in. For instance, on the desktop a few moments ago, just running the mouse pointer back and forth slowly across the screen, it would tend to stick for a couple of seconds when in line with the icons that are on the right side of the screen. As if there was an imaginary line stopping it. In Internet Explorer, it did not want to go to the upper right area where the favorites and home icons are. But at times, the mouse is perfect.
I've upgraded my video card drivers right from the manufacturer's website. It as if something runs in the background intermittently and hangs the mouse for a second or two.
Windows 8 Pro 64 bit
ASUS P9X79 Deluxe Mobo
Intel i7 - 3820
EVGA NVIDIA Geforce GTX 660 ti 2 gig 16x PCIE
32 gigs Kingston HyperX DDR3
240 gig Kingston HyperX Sata III SSD drive
Logitec MK320 Wireless Mouse/Keyboard on USB.
I have this issue for some days when i boot my PC. I only have my keyboard and mouse on USB, nothing else.
Here is the picture.
I have a Tablet Windows 8.1 with a Microsoft Bluetooth mouse sculpt comfort. It is very annoying that the tablet wakes up just because of the mouse,.
Bluetooth seems to change everything. I can't see any power management option anywhere in the settings/device manager.
Is there a way to do it at least via the registry?
Ssince updating windows to windows 8.1.1 my alienware tact x mouse keep lagging on me from time to time, i checked in device manager and everything says its working properly, but it will lag out on me for a few seconds and then work just fine. What could be doing this i did not have any issue before the update.
View 3 Replies View Relatedsince the last windows update Tuesday I have began to notice my mouse cursor moving around the desktop on its own. I never noticed it before the last updates.
View 4 Replies View RelatedJust got a surface Pro 2 for work. In addition to the keyboard I need a mouse. normally a cheap USB mouse would do.
however, I also have one of those 4G wireless network USB dongles that takes the only USB port.
Can any of the other ports be used for a mouse? I think it also has Bluetooth, but ideally don't rely on a mouse needing a battery.
unrelated to this, how does one use the camera properly in desktop mode? All I read it is using the cloud? what? I just want to access the pictures I take somehow. and can the camera zoom at all?
Windows 8. It removes anything I have saved from my desktop, leaves my main folders blank and it also resets all of the programs I have on my account. The files do seem to be safe from within the computer/Local Disk ( C : ) /users folder and I do not have separate accounts for anyone.How do I prevent it from resetting itself every time I start up my computer?
View 1 Replies View RelatedI have a Sony Vaio running Windows 8.1 Pro. I was on cs portable with a USB mouse and I pressed a few keys and the mouse stopped to work. It came up with the message that it was not recognized. I tried to uninstall the USB drivers, but had no luck. This problem has been going on for a few days. I tried other solutions but they didn't seem to work. The red LED light was on.
View 9 Replies View RelatedThey are so freaking. I use a ELAN Mousepad.
View 3 Replies View RelatedOver the past three weeks or so, there have been probably seven times my wireless USB Nexus Silent Mouse has not been recognized on cold computer startups (usually morning). Windows 8 (Pro x64) throws up a message that a USB device wasn't recognized, and I don't see a mouse cursor. Unplugging and replugging the USB mouse's stick, which is in a port on the front of the computer, solves it. The mouse driver is up to date, changing USB ports hasn't made a difference and the batteries are fine (and have been changed).
View 4 Replies View RelatedRecently I bought a new lap top and installed Windows 8.1
I have an issue with the Mouse/s. I tried 2 different mouses and I encountered the same problem with both of them, so I know it's not a mouse problem. Note that both of these mouses work perfectly on my other/older/Windows 7 and previously Windows XP lap top, so it's not a mouse issue. It's either a driver problem or something else.
I have tried all 3 USB ports I got and it does the same thing.
When I turn on the lap top, if the mouse is plugged or unplugged and I plug it afterwards, it doesn't work. If however I turn on the lap top, plug in the mouse, and the restart the lap top, when it restarts the mouse works fine all up until the lap top is turned off again. And then to get it to work again I have to turn on the lap top, with the mouse plugged, or plug the mouse after it's turned on, then restart the lap top, and then the mouse works fine.
Apparently, this is not very convenient. It's a major inconvenience.
p.s I never had this issue before on any other PC computer or lap top, whether it was Windows XP or Windows 7. So it's either a Windows 8.1 issue or the new lap top issue, or a driver issue.
I got a new mouse a couple of days back, it's one of those fancy Razer mouses with 12 buttons on the side that is used for gaming and stuff. I have an issue when I try to use usb 3.0 instead of 2.0 ports. ( my tower only has like 2 2.0 ports so I try to use those for other things ) I am trying not to buy a usb hub before somebody says it
On games ( fullscreen or Windowed ) quickslot controls where you can use the numbers on your mouse I can't use the 3.0 port as it won't recognize the side buttons but it will on the 2.0 port.
I am guessing this is a driver problem but I am unsure. Neither the native mouse driver for Windows nor the fancy Cloud Synapse driver 2.0 works.
I don't want to use the DNS servers of my ISP and I don't know how many times I changed over to third party DNS
servers now.
But 2 weeks later when it occurs to me to check, they are almost always back to Auto, i.e. the ISPs.
Why does this happen and how can I prevent it?
Client with advent DT2412 failed motherboard. old motherboard MSI B75M A-P45 (discontinued). replaced with Gigabyte GA-B75M-D3H Socket 1155 M-ATX Motherboard.
Client confirms no backup and insisting that I we try not to lose data. Managed to get the desktop up and running as same chipset on new mobo. client now complaining that computer drops out randomly. I've asked the client to back up there data and stated that we will have to complete a fresh re-install due to possible driver issues.
If we run the factory reset disks from advent will it not load the same chipset and drivers for the MSI? thus causing it to drop out again? If I install a fresh copy of windows 8 where do i get the product key from?
Ok I finished up my PC Build
i74930 K
Asus Rampage IV Black Ed mobo
16Gb DDR 3 ram
Samsung 840 EVO ssd
2 TB WD HDD
My mouse or Keyboard or both suddenly without warning will stop functioning. Sometimes one or the other sometimes both. I tried running a game for a small bench test and it dropped the mouse and keyboard so I had to use the reset button to get out.
On PC, has a problem with the PS2 keyboard and mouse staying on after the PC is turned off...the lights are still on.
The only thing different when I had it was the keyboard and muse and the OS....I use a logitech G510 and a Razer DeathAdder, both USB and the OS was 7 Ultimate 64 bit. My sons system is running 7 Pro 64 bit and using an old OEM HP keyboard/mouse.
I installed the 8.1 patch today and shortly after the mouse disappeared from my screen completely (I have a laptop with a touch pad). I tried going into task manager as just going in and cancelling used to solve this problem before installing the patch but this no longer works. I also tried rebooting (switching off then on again) but this didn't work and the computer didn't even reboot; just reopened my session exactly where I left off even when I waited ten minutes before switching the on switch again. I have temporarily solved this problem with a usb mouse borrowed from a family member but my family member needs it back (and I also would prefer to use the touchpad).
I should add here that I didn't want to do the installation when it started happening and while I meant to press the "default settings" option, I think I went with "customise settings" by accident. I just said ok to everything as I had a deadline and needed computer access. Could I have pressed "turn touch pad off" and if so how do I change this?
Every now and then my mouse will freeze. If I turn off the mouse then back on it starts working again. Have this happen with Bluetooth mouse?
I have used this mouse on two different computers and both do the same thing. I'm thinking it is the mouse since it's doing it on my desktop with a Bluetooth dongle and my Asus T100 with built in Bluetooth.
I was having the issue where windows 8 randomly disconnects bluetooth devices, so i tried to remove then reinstall it. When trying to remove, after a while, it comes up with a message saying "Unable to remove device".
So I go straight to device manager and uninstall my mouse from there. it works. I go back to the windows 8 show bluetooth devices menu and the mouse is still there. I hit remove and it works.
Now when i restart my computer its BACK in both device manager and bluetooth device menu. I just want it off and gone.
Recently, with my Mouse (Optical) the Mouse Pointer does not respond all of the time.
View 1 Replies View RelatedWell, my first real problem with 8.1, my bluetooth mouse drops connection about every 15-20 minutes. Turn it off and back on it reconnects.
A search of the web shows other people with same problem. I've tried everything I know of, power settings for bluetooth the mouse and usb ports, drivers, uninstall/re-install.
I can install and use any of two bluetooth mice (Dell PU705 Travel mouse or Samsung S Action mouse ET-MP900D) on my Lenovo Ideapad Z710 laptop. This works fine with either mouse for an average of 20 minutes (varies) then it loses contact with the laptop and its back to using the touchpad. When I go to the Bluetooth settings page -- "Manage Bluetooth Devices", the control suddenly reappears on entering the page with no further action from me. The recovery of the device like this happens on no other page, to my knowledge. I have a phone and a tablet paired with the laptop on bluetooth and they stay paired. I have installed the latest Lenovo bluetooth drivers with no improvement. It appears that the mice are still connected but not responding to the laptop until they get a small 'kick' when I return to the Bluetooth settings page. New, full strength batteries are installed.
View 1 Replies View RelatedI have a lenovo G505 laptop running windows 8.1 and i am having issues trying to install my bluetooth USB adapter, a belkin F8T017.
I have tried installing the drivers but it doesn't recognise the device during the installation, and when I check device manager it shows as a HID compliant Mouse, i have tried everything i can find on google, tried installing the vista drivers in compatibility mode, and repeatedly uninstalled the device in DM, even tried to update the driver software and pointing to the correct drivers but as the drivers are old it keeps saying the drivers installed are the most up to date (even though they are wrong) it does not recognise it as a bluetooth adapter, and it works in my fiancee's laptop and my desktop which both run win7 ultimate.
I want to know how to get smooth scrolling in metro app with mouse wheel. I'hv seen some videos of windows 8 it has really smooth - fluid scrolling with touch. I have smooth scoll in start but not in metro apps.
View 2 Replies View Related