Hardware Drivers :: New PC Build Win 8.1 Mouse And Keyboard Keep Dropping Out
Jun 22, 2014
Ok I finished up my PC Build
Asus Rampage IV Black Ed mobo
16Gb DDR 3 ram
Samsung 840 EVO ssd
2 TB WD HDD
My mouse or Keyboard or both suddenly without warning will stop functioning. Sometimes one or the other sometimes both. I tried running a game for a small bench test and it dropped the mouse and keyboard so I had to use the reset button to get out.
On PC, has a problem with the PS2 keyboard and mouse staying on after the PC is turned off...the lights are still on.
The only thing different when I had it was the keyboard and muse and the OS....I use a logitech G510 and a Razer DeathAdder, both USB and the OS was 7 Ultimate 64 bit. My sons system is running 7 Pro 64 bit and using an old OEM HP keyboard/mouse.
Installed windows 8.1 preview last night and after installing i get stuck at the lock screen, cant click or punch keys to log in. Since the powers that be decided to change how you boot into safe mode is my only option to format?
I have a new Dell Inspiron 2350 windows 8.1 for the last week or so the usb wireless keyboard and mouse do not work when the system is booted or after coming out of deep sleep mode. I have to unplug the usb dongle and plug it in again for them to work.
I have already checked the powering saving settings for these devices, and it is disabled. There is no setting in the bios that I can see which would cause this. I have re-installed the drivers. I have tried different USB port. Dell have even replaced the keyboard and mouse and batteries, same problem.
I have recently upgraded to windows 8. I was previously using a logitech mk320 mouse/keyboard and experiencing the same issues. So I purchased the new K330 setup that is windows 8 compatible, but again same issues. A little less frequently, but same issues.
Basically the keyboard will randomly have a 3 to 15 second delay when typing. To make it worse when it does finally pick up it leaves out letters making it very hard to type anything. Secondly the mouse will also randomly be very choppy. Not completely unresponsive, but skip over large sections of the screen. It's almost like the batteries are dying, but I have replace them 2 times now with fresh ones.
I have a problem with keyboard and mouse. Every day when i playing some games my keyboard randomly stop working (backlight on keyboard still light but LED on num lock is off and buttons don't work) after few seconds my mouse also stop working. Plugin to another USB doesn't work. Only when i disconnect keyboard and connect mouse to other USB mouse work. After restarting system all works fine. Im sure keyboard and mouse is good (testing it on laptop when this happens and its work normal). I have updated drivers and BIOS.
PC spec.: Windows 8.1 AMD Phenom II x4 940 Gigabyte ga MA790x UD4P GTX 660 2xHDD+1SSD
No keyboard or mouse by attempting to add safe mode with networking. What is UEFI? Where do I find this USB viewable option as I am connected by USB?
I went to set up (F2 at boot) > and then searched around for anything that relates to USB and found that USB is enabled and on high speed. Hope that is not it and I am missing something, because I still have no mouse or keyboard.
Keyboard and mouse are the ones that came with the Dell XPS 7100 system. I'll try different USB ports and report back...didn't make a difference.
I've started getting the message Microsoft Mouse & Keyboard Center has Stopped Working (see error report below) when Windows 8 starts. I've tried uninstalling and re-installing the latest version of the Mouse & Keyboard Center but still have the same problem.
Problem signature: Problem Event Name:APPCRASH Application Name:itype.exe Application Version:18.104.22.168 Application Timestamp:50934cc8 Fault Module Name:KERNELBASE.dll
I'm running Windows 8.1, and never had problems with my wireless mouse ad keyboard. But my keyboard has a real problem, and I tried with a normal PS2 keyoard. But it wasn't recognized. I read, that when we use a USB mouse or keyboard, the PS2 is disabled. I tried the following:
HKEY_LOCAL_MACHIE/CurrentControlSet/i8042prt and edited the value of "START" from 3 to 1.
But it didn't work. Is there another way to enable PS2 keyboards again?
I'm using a ASUS Notebook K53E Series laptop computer running Windows 7 Home Premium 64-bit Service Pack 1... I'm using a HDMI to project onto a HD TV I have a USB keyboard and mouse hooked up, both Logitech... The problem I'm having is, both the mouse and keyboard keep disconnecting on me... The mouse will go first' I'll move it from one USB port to the other, and it will work, but then stop working again... The keyboard will just stop working, even if I move it I can't get it to reconnect... I have to shutdown my computer to get everything to start working again, but it will only last about a half hour before they stop working again after the reboot...
I've went into the device manager, under Universal Serial Bus controllers > Generic USB Hub > properties > Power Management, and unchecked "Allow the computer to turn off this device to save power... This does not work... I then uninstalled it, and rebooted my computer, still doesn't work... I then tried to system restore, I couldn't because I had no restore points, I then look if there was any system updates, there was, but minor updates, I updated them anyways, still no go... I'm only having problems with the USB mouse and keyboard... My laptop touch pad and everything else works fine...
today I was makeing an essey in microsof office and suddenly my mouse and keyboard. stopped working, replugging the devices didn't worked (did it for 5 times ) , after this I tried to restart the pc I found out that rr button doesn't do anything , after I stopped the power going to pc and open power + pc they worked for only a few seconds and then stopped again . After a few force shutdown( by stopping the power) the pc closes itself after the windos 8 img dissapear . I have a desktop dual core 3.1, 4gb ram , mouse is usb and the keyboard is with Ps/2 .
Update : after waiting 30 min I reopend it, all worked , but after approximate 3 min pc shuted down by itself.
I have an Acer Aspire M computer with a touch screen that runs Windows 8.1. I was having issues with the touch screen, so I went to download the drivers from the Acer website. However, when I restarted my computer to complete the installation, it wouldn't allow me to use either the mouse, touch screen, or keyboard.
Normally, after loading, a personalized picture will appear on the screen, displaying the time, connectibility, and strength of the network. The user is then supposed to swipe up, click on, or press space to move the picture, at which point the login screen appears. My computer loads normally when starting, but won't allow me to use the mouse, touch screen, or keyboard to move the picture out of the way, so I cannot access the login screen.
I have already contacted the Acer company support and attempted to use the battery reset pinhole, but to no avail. Is there anything I can do, besides a factory reset or using it as a cat bed?
I Defraged my comp to Optimize. After defrag, my mouse and keyboard no longer worked. I tried restarting, unpluging and switching to a wired mouse and keyboard. I can't get the comp to recognize them. I also switched between back and front ports.
I bought a Sony Vaio E-Series SVE17812BCXB running Windows 8. After the last major windows update that occurred in Feburary '13, the keyboard/mouse stop responding once the fully loaded splash screen is presented (With the time and date, ect).
I know the keyboard and mouse are fully functioning as I can use them when I access the boot menu before the OS is loaded. Also, only the keyboard 'functions' work when the OS is loaded, such as adjusting the brightness of the monitor (fn+F5) and such, but nothing else.
I try to do a system restore and it fails on all available restore points. I try to do a manual repair using a bootable USB drive, and it just loads windows like normal. I'm at a loss on how to get this fixed and as of right now, I purchased an $800 paper-weight.
I have a wireless keyboard and mouse (combo) plugged into my netbook (acer aspire one 522) and can't get the netbook to wake from sleep mode with either of them when the lid is closed (i always keep it closed other than this for this workaround).
I had set the power options to 'do nothing' when the lid is closed (only for when it's plugged in), and when i try to wake from sleep, the power and WLAN lights on the netbook flash whenever i move the mouse or press keys but nothing else. i have to open the lid, then press a key to wake from sleep, then i close the lid again. i checked Power Management settings for both keyboard and mouse and they both have the check box ticked for 'Allow this device to wake the computer'.
I use a Gateway NE56R49u Windows 8 laptop, which I sometimes use to connect to a Dell computer monitor via VGA and an external keyboard and mouse using USB. I want to be able to use the monitor with the ext. mouse and keyboard while the lid of the laptop is closed, however, everytime I close the lid the system goes to sleep and won't turn back on even if I move the mouse or press a key on the keyboard. I've tried going to Device Manager and enabling the mouse and keyboard to wake my Windows 8 laptop but that seems to have no effect on what happens when I try to wake my laptop when the lid is closed. I am able to do this on a Windows 7 laptop (HP Pavilion g6), but how can I configure my windows 8 laptop so I can do the same on my Windows 8 laptop?
I updated win8 pro for synaptic, windows instruct me remove previous driver to install the updated driver, after so and after restart I could not use now my KB and pointing device, I can't login to win to reinstall drivers...
I uninstalled Intel Smart Connect Technology after experiencing a BSOD that seemed to be caused by a related driver. When the uninstallation tool asked if I wanted to restart now/later, I chose to restart now, which was followed by another BSOD.
Now I can boot into Windows just fine but neither my mouse or my keyboard are working. They work in the BIOS but as soon as Windows is loaded, they stop functioning. I've tried resetting my CMOS but this did not solve the problem. I've also checked that they are enabled in the BIOS.
I would try a system restore but Windows 8 doesn't seem to allow me to boot into repair mode without actually going into Windows first, but I can't do it from Windows because of my malfunctioning peripherals.
I can't use the Windows 8 installation disc to repair because as soon as the message that says "Press any key to continue" comes up, my keyboard stops working. However, it seems I can force the PC to boot from the CD which after a bit of a wait gets me to the Windows installation screen, with my only option being to completely reinstall Windows.
I am able to enter Windows Repair Mode with the Installation disc, but there is no option for Safe Mode and when I attempt to System Restore, I get this error message: "To use System Restore, you must specify which Windows installation to restore. Restart this computer, select an operating system, and then select System Restore."
Laptop Keyboard and Mouse is not working properly now. Last time this occurred which was about 3 months ago, I reset-ed Windows 8 and it was all working again. When this occurs, in both incidents, I can't go to bios, can't enter password to login, can't open on-screen keyboard(except sometimes), and even if I get open, using it is same as using the keyboard.
Mouse errors: LMB changes to Select all thing so I can't click anything. This issue is same at least most of the time.
Keyboard errors: This varies a lot from time to time.
I reset-ed OS this time too and the problem still exists unlike before.
Ex: I'm not sure this key is this or not, but it was I think Z is ctrl, x is alt, a don't work, ctrl, alt, shift don't work. Then, keyboard itself keep on pressing space or opening windows support.
And then I updated my BIOS and now the problem was a little bit solved or I think it would be best to say the problem changed bit.
Now z,x,a, spacebar, ctrl, alt, shift, everything working,except ! and maybe a few other keys, but now It keeps pressing caps lock, shift and opening up windows support.
Then I restarted, and now I pressed F2(BIOS) and it let me in. I tried changing the boot priorty order but those keys F5/F6 aren't working, so I restarted, now again I can't press F2.
And sometimes laptop beeps for some reason on booting up.
There are no keyboard drivers except the default one and sticky and filter are all off.
The task manager was showing processing was a little high so I ended tasks I thought shouldn't be running like the store and then I ended what i thought was internet explorer, but it was windows explorer and it black screened and when I restarted it the mouse stopped working and I kept trying to do stuff i thought would work and restarting and then the keyboard also stopped working.
I upgraded my H T PC to Windows 8 earlier today. Everything was working fine, no issues with the install right up until I added the Media Center feature. After that installed and rebooted, I have no mouse or keyboard. No mouse cursor, nothing. I've tried different keyboards, different USB ports, everything.
Since, in Microsoft's infinite wisdom they removed the F 8 functionality I can't even get into safe mode to do a system restore. Their solution is "boot into windows and use recovery options to restart into safe mode" - great, so what do I do if Windows has disabled the mouse & keyboard?
I can force it into the basic recovery mode by just resetting it a couple times but it won't let me do a system restore from in there, it is telling me the drive is locked.
What do I do? How else can I get into system restore?
Just got a surface Pro 2 for work. In addition to the keyboard I need a mouse. normally a cheap USB mouse would do. however, I also have one of those 4G wireless network USB dongles that takes the only USB port.
Can any of the other ports be used for a mouse? I think it also has Bluetooth, but ideally don't rely on a mouse needing a battery.
unrelated to this, how does one use the camera properly in desktop mode? All I read it is using the cloud? what? I just want to access the pictures I take somehow. and can the camera zoom at all?
Over the past three weeks or so, there have been probably seven times my wireless USB Nexus Silent Mouse has not been recognized on cold computer startups (usually morning). Windows 8 (Pro x64) throws up a message that a USB device wasn't recognized, and I don't see a mouse cursor. Unplugging and replugging the USB mouse's stick, which is in a port on the front of the computer, solves it. The mouse driver is up to date, changing USB ports hasn't made a difference and the batteries are fine (and have been changed).
Recently I bought a new lap top and installed Windows 8.1
I have an issue with the Mouse/s. I tried 2 different mouses and I encountered the same problem with both of them, so I know it's not a mouse problem. Note that both of these mouses work perfectly on my other/older/Windows 7 and previously Windows XP lap top, so it's not a mouse issue. It's either a driver problem or something else.
I have tried all 3 USB ports I got and it does the same thing.
When I turn on the lap top, if the mouse is plugged or unplugged and I plug it afterwards, it doesn't work. If however I turn on the lap top, plug in the mouse, and the restart the lap top, when it restarts the mouse works fine all up until the lap top is turned off again. And then to get it to work again I have to turn on the lap top, with the mouse plugged, or plug the mouse after it's turned on, then restart the lap top, and then the mouse works fine.
Apparently, this is not very convenient. It's a major inconvenience.
p.s I never had this issue before on any other PC computer or lap top, whether it was Windows XP or Windows 7. So it's either a Windows 8.1 issue or the new lap top issue, or a driver issue.
I got a new mouse a couple of days back, it's one of those fancy Razer mouses with 12 buttons on the side that is used for gaming and stuff. I have an issue when I try to use usb 3.0 instead of 2.0 ports. ( my tower only has like 2 2.0 ports so I try to use those for other things ) I am trying not to buy a usb hub before somebody says it
On games ( fullscreen or Windowed ) quickslot controls where you can use the numbers on your mouse I can't use the 3.0 port as it won't recognize the side buttons but it will on the 2.0 port.
I am guessing this is a driver problem but I am unsure. Neither the native mouse driver for Windows nor the fancy Cloud Synapse driver 2.0 works.
Every single time I reboot my system my mouse fails to register in the system. I have to physically unplug it and plug it back in for Windows 8.1 to register it. Once I do that I have literally no issues at all..... How to fix this so it doesn't happen every single time I reboot?
I installed the 8.1 patch today and shortly after the mouse disappeared from my screen completely (I have a laptop with a touch pad). I tried going into task manager as just going in and cancelling used to solve this problem before installing the patch but this no longer works. I also tried rebooting (switching off then on again) but this didn't work and the computer didn't even reboot; just reopened my session exactly where I left off even when I waited ten minutes before switching the on switch again. I have temporarily solved this problem with a usb mouse borrowed from a family member but my family member needs it back (and I also would prefer to use the touchpad).
I should add here that I didn't want to do the installation when it started happening and while I meant to press the "default settings" option, I think I went with "customise settings" by accident. I just said ok to everything as I had a deadline and needed computer access. Could I have pressed "turn touch pad off" and if so how do I change this?