Hardware Drivers :: Dell XPS 7100 System - Keyboard And Mouse Not Working?
Jul 18, 2014
No keyboard or mouse by attempting to add safe mode with networking. What is UEFI? Where do I find this USB viewable option as I am connected by USB?
I went to set up (F2 at boot) > and then searched around for anything that relates to USB and found that USB is enabled and on high speed. Hope that is not it and I am missing something, because I still have no mouse or keyboard.
Keyboard and mouse are the ones that came with the Dell XPS 7100 system. I'll try different USB ports and report back...didn't make a difference.
Installed windows 8.1 preview last night and after installing i get stuck at the lock screen, cant click or punch keys to log in. Since the powers that be decided to change how you boot into safe mode is my only option to format?
I have a new Dell Inspiron 2350 windows 8.1 for the last week or so the usb wireless keyboard and mouse do not work when the system is booted or after coming out of deep sleep mode. I have to unplug the usb dongle and plug it in again for them to work.
I have already checked the powering saving settings for these devices, and it is disabled. There is no setting in the bios that I can see which would cause this. I have re-installed the drivers. I have tried different USB port. Dell have even replaced the keyboard and mouse and batteries, same problem.
I have a problem with keyboard and mouse. Every day when i playing some games my keyboard randomly stop working (backlight on keyboard still light but LED on num lock is off and buttons don't work) after few seconds my mouse also stop working. Plugin to another USB doesn't work. Only when i disconnect keyboard and connect mouse to other USB mouse work. After restarting system all works fine. Im sure keyboard and mouse is good (testing it on laptop when this happens and its work normal). I have updated drivers and BIOS.
PC spec.: Windows 8.1 AMD Phenom II x4 940 Gigabyte ga MA790x UD4P GTX 660 2xHDD+1SSD
I've started getting the message Microsoft Mouse & Keyboard Center has Stopped Working (see error report below) when Windows 8 starts. I've tried uninstalling and re-installing the latest version of the Mouse & Keyboard Center but still have the same problem.
Problem signature: Problem Event Name:APPCRASH Application Name:itype.exe Application Version:220.127.116.11 Application Timestamp:50934cc8 Fault Module Name:KERNELBASE.dll
today I was makeing an essey in microsof office and suddenly my mouse and keyboard. stopped working, replugging the devices didn't worked (did it for 5 times ) , after this I tried to restart the pc I found out that rr button doesn't do anything , after I stopped the power going to pc and open power + pc they worked for only a few seconds and then stopped again . After a few force shutdown( by stopping the power) the pc closes itself after the windos 8 img dissapear . I have a desktop dual core 3.1, 4gb ram , mouse is usb and the keyboard is with Ps/2 .
Update : after waiting 30 min I reopend it, all worked , but after approximate 3 min pc shuted down by itself.
I Defraged my comp to Optimize. After defrag, my mouse and keyboard no longer worked. I tried restarting, unpluging and switching to a wired mouse and keyboard. I can't get the comp to recognize them. I also switched between back and front ports.
I uninstalled Intel Smart Connect Technology after experiencing a BSOD that seemed to be caused by a related driver. When the uninstallation tool asked if I wanted to restart now/later, I chose to restart now, which was followed by another BSOD.
Now I can boot into Windows just fine but neither my mouse or my keyboard are working. They work in the BIOS but as soon as Windows is loaded, they stop functioning. I've tried resetting my CMOS but this did not solve the problem. I've also checked that they are enabled in the BIOS.
I would try a system restore but Windows 8 doesn't seem to allow me to boot into repair mode without actually going into Windows first, but I can't do it from Windows because of my malfunctioning peripherals.
I can't use the Windows 8 installation disc to repair because as soon as the message that says "Press any key to continue" comes up, my keyboard stops working. However, it seems I can force the PC to boot from the CD which after a bit of a wait gets me to the Windows installation screen, with my only option being to completely reinstall Windows.
I am able to enter Windows Repair Mode with the Installation disc, but there is no option for Safe Mode and when I attempt to System Restore, I get this error message: "To use System Restore, you must specify which Windows installation to restore. Restart this computer, select an operating system, and then select System Restore."
Laptop Keyboard and Mouse is not working properly now. Last time this occurred which was about 3 months ago, I reset-ed Windows 8 and it was all working again. When this occurs, in both incidents, I can't go to bios, can't enter password to login, can't open on-screen keyboard(except sometimes), and even if I get open, using it is same as using the keyboard.
Mouse errors: LMB changes to Select all thing so I can't click anything. This issue is same at least most of the time.
Keyboard errors: This varies a lot from time to time.
I reset-ed OS this time too and the problem still exists unlike before.
Ex: I'm not sure this key is this or not, but it was I think Z is ctrl, x is alt, a don't work, ctrl, alt, shift don't work. Then, keyboard itself keep on pressing space or opening windows support.
And then I updated my BIOS and now the problem was a little bit solved or I think it would be best to say the problem changed bit.
Now z,x,a, spacebar, ctrl, alt, shift, everything working,except ! and maybe a few other keys, but now It keeps pressing caps lock, shift and opening up windows support.
Then I restarted, and now I pressed F2(BIOS) and it let me in. I tried changing the boot priorty order but those keys F5/F6 aren't working, so I restarted, now again I can't press F2.
And sometimes laptop beeps for some reason on booting up.
There are no keyboard drivers except the default one and sticky and filter are all off.
I upgraded my H T PC to Windows 8 earlier today. Everything was working fine, no issues with the install right up until I added the Media Center feature. After that installed and rebooted, I have no mouse or keyboard. No mouse cursor, nothing. I've tried different keyboards, different USB ports, everything.
Since, in Microsoft's infinite wisdom they removed the F 8 functionality I can't even get into safe mode to do a system restore. Their solution is "boot into windows and use recovery options to restart into safe mode" - great, so what do I do if Windows has disabled the mouse & keyboard?
I can force it into the basic recovery mode by just resetting it a couple times but it won't let me do a system restore from in there, it is telling me the drive is locked.
What do I do? How else can I get into system restore?
Ok I finished up my PC Build i74930 K Asus Rampage IV Black Ed mobo 16Gb DDR 3 ram Samsung 840 EVO ssd 2 TB WD HDD
My mouse or Keyboard or both suddenly without warning will stop functioning. Sometimes one or the other sometimes both. I tried running a game for a small bench test and it dropped the mouse and keyboard so I had to use the reset button to get out.
On PC, has a problem with the PS2 keyboard and mouse staying on after the PC is turned off...the lights are still on.
The only thing different when I had it was the keyboard and muse and the OS....I use a logitech G510 and a Razer DeathAdder, both USB and the OS was 7 Ultimate 64 bit. My sons system is running 7 Pro 64 bit and using an old OEM HP keyboard/mouse.
I have recently upgraded to windows 8. I was previously using a logitech mk320 mouse/keyboard and experiencing the same issues. So I purchased the new K330 setup that is windows 8 compatible, but again same issues. A little less frequently, but same issues.
Basically the keyboard will randomly have a 3 to 15 second delay when typing. To make it worse when it does finally pick up it leaves out letters making it very hard to type anything. Secondly the mouse will also randomly be very choppy. Not completely unresponsive, but skip over large sections of the screen. It's almost like the batteries are dying, but I have replace them 2 times now with fresh ones.
Today i turned on my G73JH today and my keyboard is not working, I have windows 8.1 and had to use the on screen keyboard to type anything in. The keyboard works fine when i press F2 to go into the bios and and can navigate around the bios no problem.
I have a Windows 8.1 Lenovo notebook and a Toshiba Satellite Windows 7 laptop, and a mouse.
Well, the mouse has been working fine for 4 months, but suddenly, the mouse has stopped working in my Toshiba laptop. As I didn't know how to fix it, and as Toshiba laptop was full of crap, I've just formatted its HDD and made a clean install of Windows 8.1 and updated everything.
After that, I've plugged the mouse in and the same error: it connects and disconnects all the time. Sometimes, if I'm in the Device Manager refreshing the devices, mysteriously it start to work, but just for a few minutes. Sometimes, and just sometimes, the Device Manager shows that there's an unknown device connected to a USB port that is not working. The error code is 43.
That mouse works perfectly in my other notebook, the lenovo. I've connected a different mouse to the Toshiba and it works perfectly, in any port. So that makes me say this:
-The mouse is not broken, cause it works in my other laptop
-Toshiba's USB ports work nice cause any other device I connect works seamlessly
-After a clean install, it can't be a software problem
I'm having a problem with getting the mouse wheel button to work correctly in 8.1
I've switched to left handed use to alleviate shoulder pain.
Before this I had the mouse and keyboard center installed. I use a cheap USB keyboard and a microsoft USB optical wheel mouse. Configured for the right hand, everything works correctly. The right button is the normal select, the right is context and I configured the wheel button to double click.
When I switch to left hand I lose the wheel button double click. The select / context buttons are properly working, but when I click the wheel it appears to be the same as a context button click. I thought maybe the settings got messed up when I switched the buttons so I tried setting the wheel button to another function (open charms in this case). That works. Switched the wheel button back to double click and it goes back to open context menu.
I uninstalled and re-installed the mouse and keyboard center. That made no difference. Seems like a bug here.
On, this is on a new (mid-april) HP laptop so there is a touchpad that I almost never use because I generally have the mouse, keyboard, and external monitor attached with the lid closed.
my keyboard doesn't work correctly. In most programs and on webpages, the number keys do not work nor do the special characters accessed through the shift key. Sometimes they act like the space bar, other times they repeat the previously typed alpha character.
All works perfectly in MS Word. The numbers on the keypad do work in all programs. I've checked the control panel and can't find any settings that appear to influence this - no accessibility settings, nothing.
I own an hp pavilion sleekbook 15. Just out of the blue my mouse and touch pad stopped working after a restart. I download a new driver from the hp website, synaptic touch ps/2, installed it and still nothing. After several tries I don't know what to do anymore. I checked the device manager and nothing is installed, when I check the control panel it says reinstall.
I have a Sony Vaio running Windows 8.1 Pro. I was on cs portable with a USB mouse and I pressed a few keys and the mouse stopped to work. It came up with the message that it was not recognized. I tried to uninstall the USB drivers, but had no luck. This problem has been going on for a few days. I tried other solutions but they didn't seem to work. The red LED light was on.
I have a windows 8.1 dell laptop ,for some reason system restore is not creating points manually or automatically, when I try to make a restore point manually the working bar just keeps moving at the sane time though I noticed in the device manger a generic volume shadow copy entry will show up with a yellow mark beside it ,I have tried maybe 10-15 times to uninstall this and try system restore again ,but this keeps repeating itself,
I have also went into safe mode but system restore points can't be made under safe mode, I did the repository thing where I rename that folder to old and reset repository in safe mode ,same result .
I was able to install Win 8.1 on my laptop (Dell Studio XP 1340).
Resolved here: Windows 8.1 RTM installation fails on Dell XPS 1340
I had to disable Bluetooth in BIOS to be able to install the system.
Now with the system up and running I would like to use Bluetooth. The device is not listed in Device Manager and no driver was installed. When I enable it in BIOS system will not start, it crashes with error [URL]....
I found the driver which should be installed. So with Bluetooth still disabled I tried to install it. It's in exe so I can't really get the driver files. The SW asks for Bluetooth to be activated by a switch. I have a button which normally turns Wifi+Bluetooth on/of .. but with BT disabled it does not work, obviously. And the only option is 'Cancel' : [URL] ....
I have a Dell E5530 using windows 8.1 Been using laptop for 5+ months. For the first time today, I clicked the Camera panel and received msg
"Connect a Camera".
Ran Dell PC diagnostics, no errors were found. I do not have a Imaging Device folder (that stores the Webcam) in Device Manager. Installed Dell Webcam Central, but when launched, I get msg "Please plug in a supported device" I am not able to run this application either.
I'm running Windows 8.1, and never had problems with my wireless mouse ad keyboard. But my keyboard has a real problem, and I tried with a normal PS2 keyoard. But it wasn't recognized. I read, that when we use a USB mouse or keyboard, the PS2 is disabled. I tried the following:
HKEY_LOCAL_MACHIE/CurrentControlSet/i8042prt and edited the value of "START" from 3 to 1.
But it didn't work. Is there another way to enable PS2 keyboards again?
I'm using a ASUS Notebook K53E Series laptop computer running Windows 7 Home Premium 64-bit Service Pack 1... I'm using a HDMI to project onto a HD TV I have a USB keyboard and mouse hooked up, both Logitech... The problem I'm having is, both the mouse and keyboard keep disconnecting on me... The mouse will go first' I'll move it from one USB port to the other, and it will work, but then stop working again... The keyboard will just stop working, even if I move it I can't get it to reconnect... I have to shutdown my computer to get everything to start working again, but it will only last about a half hour before they stop working again after the reboot...
I've went into the device manager, under Universal Serial Bus controllers > Generic USB Hub > properties > Power Management, and unchecked "Allow the computer to turn off this device to save power... This does not work... I then uninstalled it, and rebooted my computer, still doesn't work... I then tried to system restore, I couldn't because I had no restore points, I then look if there was any system updates, there was, but minor updates, I updated them anyways, still no go... I'm only having problems with the USB mouse and keyboard... My laptop touch pad and everything else works fine...
I have an Acer Aspire M computer with a touch screen that runs Windows 8.1. I was having issues with the touch screen, so I went to download the drivers from the Acer website. However, when I restarted my computer to complete the installation, it wouldn't allow me to use either the mouse, touch screen, or keyboard.
Normally, after loading, a personalized picture will appear on the screen, displaying the time, connectibility, and strength of the network. The user is then supposed to swipe up, click on, or press space to move the picture, at which point the login screen appears. My computer loads normally when starting, but won't allow me to use the mouse, touch screen, or keyboard to move the picture out of the way, so I cannot access the login screen.
I have already contacted the Acer company support and attempted to use the battery reset pinhole, but to no avail. Is there anything I can do, besides a factory reset or using it as a cat bed?
I bought a Sony Vaio E-Series SVE17812BCXB running Windows 8. After the last major windows update that occurred in Feburary '13, the keyboard/mouse stop responding once the fully loaded splash screen is presented (With the time and date, ect).
I know the keyboard and mouse are fully functioning as I can use them when I access the boot menu before the OS is loaded. Also, only the keyboard 'functions' work when the OS is loaded, such as adjusting the brightness of the monitor (fn+F5) and such, but nothing else.
I try to do a system restore and it fails on all available restore points. I try to do a manual repair using a bootable USB drive, and it just loads windows like normal. I'm at a loss on how to get this fixed and as of right now, I purchased an $800 paper-weight.
I have a wireless keyboard and mouse (combo) plugged into my netbook (acer aspire one 522) and can't get the netbook to wake from sleep mode with either of them when the lid is closed (i always keep it closed other than this for this workaround).
I had set the power options to 'do nothing' when the lid is closed (only for when it's plugged in), and when i try to wake from sleep, the power and WLAN lights on the netbook flash whenever i move the mouse or press keys but nothing else. i have to open the lid, then press a key to wake from sleep, then i close the lid again. i checked Power Management settings for both keyboard and mouse and they both have the check box ticked for 'Allow this device to wake the computer'.