I have a a Toshiba Satellite P55t with windows 8.1. Today I used the Toshiba Password utility to set a User password, Rebooted the machine and got a "reboot and select proper device" error. Hitting F12, F2, Esc, nothing works. Putting the recovery DVD in does not work.
View 9 Replies
My computer rebooted and then started coming up with the message: 'Reboot and select proper Boot device'
Now from what I understand this means that the computer is unable to detect a boot-able OS. I am silly and haven't yet created a windows recovery disk or flash drive.
However my question is, is there a way I can get a recovery utility of some kind off the net so that I can get the computer to detect the boot-able OS ?
I keep getting this message everytime I try to boot. I just recently installed a GTX 760 and a new power supply.It worked before, how would I solve this?
View 1 Replies View Relatedan error message in Device Manager when installing the network attached storage drives like MyBook Live, the drives themselves seem to work fine and i have access to them (most of the time) on my home netwok, however i keep getting that little yellow triangle telling me that something is wrong, specifically:
the device manager error code is This device cannot start. (Code 10)
I have a windows 8 laptop and a linux desktop, both connected to the same screen using hdmi - since my screen has only 1 HDMI input, I use an HDMI splitter.
Every time I move from the linux to the windows 8 laptop (using a HDMI mini remote control), I get a message from windows saying that in order to apply these changes I need to reboot.
Note that I also use the same wireless keyboard and mouse for both computers - each time I change from one computer to the other, I unplug the USB that controls them and plug it in the computer I will use.
I think that the problem is related to the HDMI, not the keyboard/mouse usb - but I am not sure.
Needless to say that it is very annoying and I cant keep restarting the LT each time I move from one to the other.
I checked event viewer to see what causes this and these are the relevant messages:
1 - Device 'USBVID_045E&PID_0745&MI_017&1a5cec9a&0&0001' requires installation.
Microsoft-Windows-Kernel-PnPConfig/Configuration
Kernel-PnPConfig
Event id: 3
2 - A reboot is required to complete device installation of device 'USBVID_045E&PID_0745&MI_017&1a5cec9a&0&0001'
Microsoft-Windows-UserPnp/DeviceInstall
UserPnp
Event id: 8000
how I can fix this, make it stop requesting reboots?
Since upgrading my HP DV6T7000-CTO from Windows 7 to Win 8 and now 8.1I have had an intermittent issue where the my wifi/bluetooth adapter is detected, until a restart, and then afterwards, is no longer detected. I have a Intel centrino wireless N 2230 which is both wifi and bluetooth. I cannot connect to wifi, nor is the bluetooth detected. Additionally, the wifi-radio button on my laptop, will not turn on (red is off, white is on). Sometimes I can temporarily fix the issue by shutting down,disconnecting the adapter from my laptop, reseating it, and then rebooting. This does not always work though.
I have tried the latest drivers from Intel as well as tried removing those and just installing whatever Windows update thinks is best. I have also updated the Bios to the latest, but to no avail. I have even replaced the adapter with a new adapter but the same model and that did not fix the issue either.
Running windows 8.1 and trying to install Spotify, I keep getting error 53 when I select retry I get error 17. What's going on with Spotify.
View 4 Replies View RelatedI wanted to do a fresh windows 8.1 install (i have a samsung NP500P4C-T03CL notebook with windows 8 OEM preinstalled and when i updated to 8.1 the system went slow and "faily"). So i put the CD on the drive, but for my suprise when i reboted the system to enter the BIOS the F2 key didn't do the job, nor it appeared on the splash screen on samsung. After googling a lot and under trial/error concept i could enter the BIOS via Shift+Restart.
I did some changes to the BIOS booting set-up and noticed i have 2 Windows Boot Manager, the CD, the HDD and one option called "SETUP" that has a "!" ("!3.Setup"). So i tried every combination posible with Secure boot unabled, and UEFI+CSM OS, also with UEFI disabled, and none gave me the option to enter bios with F2, or recovery with F4. I managed to install win7 on another HDD. Main thing, besides the F2, F4, F8, F9, F12 (yes i prove all of them, even ESC), is that whenever i change the boot order it's not saved, and it is restablished to:
1. Windows Boot Manager
2. Windows Boot Manager
3. Setup
4. HDD
5. CD
Also i noticed that on the password options the one for the HDD appears grayed and as "FROZEN". I entered user and supervisor password, neither cleared the HDD one. i want to keep the BIOS update as a last resort. clearly it's not hdd related as the same thing happened when i tried another hdd with win7).
Every few days I get a blue screen if death error message and have to reboot my computer. The error messages are rarely the same. Today's message was Page_fault-in_nonpaged_area (igdkmd 32.sys), however, as I said, I receive many other messages. I have googled the various messages and the usual advice is to disconnect my various bits of hardware (printer, scanner, external hard drive, router and Inport {for recording from a turntable). I am supposed to see whether the BSOD appears after each piece of hardware is removed. This isn't practical as the errors aren't occurring consistently or every day so I wouldn't easily be able to tell which hardware is causing the problem.
View 14 Replies View RelatedI have to copy several pages from a pdf document for a job I'm doing. How to take screen shots in adobe but when I copy each single page in to word, it is tiny. I can enlarge them in word but when I do, the writing on them is no longer legible. I also get the black background to the page which I seemingly have to cut out using a snipping too. The snipping tool problem is annoying but the other issue may prevent me from being able to do the work for the client so it's a bigger problem.
View 8 Replies View RelatedI upgraded my HP M7360N with a Pentium D 2.8 with 2gb of ram to Windows 8 and then to 8.1. It hasn't been too bad except for the video card driver, but wanted to put 2gb more of ram into it as it is a GeForce 6200 turbocache. I ordered 2 1GB pc4200 sticks which are the same as what I have in it. At first it wouldn't boot and had the ram replaced. It still didn't work and was about to send back for a refund but then put the 2 sticks in the original ram slots and it booted.
I put the original ram in the 2 slots that were originally empty and then got an ACPI_BIOS_ERROR and it said it was gathering info but it never left 0%. I am updating bios right now but the fixes listed on the update didn't say anything that I saw would be related. What can I do to try and get the ram to work.
I wanted to play around with Android some and I got this problem when i try to first open up the Android virtual session. I'm not all that familiar with the BIOS. I know how to navigate the BIOS, how to get to the BIOS, and I know it can mess you up badly if you do the wrong thing! (i.e. BIOS drivers)
View 3 Replies View RelatedI have a laptop Dell Inspiron 15R, which I bought 5 months ago from Best Buy. Yesterday I shut down the computer normally, but when I try to restarted, after Dell logo appeared, on a black screen appeared the message: "Check media..". After a few seconds, on a black screen a new message was shown: "No boot device found. Press any key to reboot the machine".
I've looked on the internet and I saw it's a common error and everybody solved it with "Windows Boot Manager" as a first choice in UEFI Boot List Option. My problem is that I don't have this option. I have only two options:
1. UEFI Onboard LAN IPv4
2. UEFI Onboard LAN IPv6
I press F9 to setup the defaults, I changed to Legacy mode, but no results.
My BIOS Version is AO( or 0 )7
I have an Acer M5-581T laptop with windows 8.1 (windows 8 was already installed when this laptop was bought) and has been running fine since i received it. Last night I accidentally dropped the the right hand side of my computer about 2 or 3 inches but no more. I didn't think anything of it until this morning when i tried to start up my computer and was successful until when i tried to open an application on my desktop and my computer froze. Also when i started up my computer i heard a scratching or cracking sound in the right hand side and this continued for the nect couple times i tried to restart my computer.
So, after it froze I restarted my computer just by holding the power button and upon turning it on again after the Acer start up screen i got the message "No bootable device. Hit any key." in a blue box. Hitting any key did nothing obviously. After some research i was able to press F2 and open up BIOS but with messing around with the settings and even changing in secure mode from UEFI and Legacy BIOS doesn't seem to work. Pressing control+alt+delete doesnt work, it only restarts my laptop. I haven't really done anything like try to change my laptop from windows 8 to windows 7 so it is still windows 8.1.
I have a Samsung Series 5, NP550, that was making me very happy until about a week ago when I accepted the Windows 8.1 upgrade that was pushed to me from Microsoft. After installing that, I had some misbehavior of my ethernet card, so I installed Samsung's Software Update to get new drivers and so forth. One thing I accepted was a BIOS update. After installing all the stuff, the PC began to tell me that my boot sector was bad, about every other startup, so I did a system restore back to the point before I installed all the software updates. I made the mistake which was to reset the BIOS to 'factory' settings - this wiped out the contents of my BOOT tab in the BIOS (P05something, which I guess is Phoenix... and UEFI). Up until then I could boot from a recovery USB, but now I cannot do that no matter what key I tap (F4, F8, F12...), I still get the same error:
0x000000f Your PC needs to be repaired - Tap F2 to enter UEFI settings.
If I cannot get past this with a bootable USB drive, how will having a recovery CDROM from Samsung (which is coming in the mail)? Either the BIOS is corrupt, or I need to find the mysterious setting that is disabling the whole thing. I can easily remove and slave my C drive to recover any files that I hadn't backed up - my fear now is that I won't even be able to recover because I have hosed the BIOS.
The only thing I have NOT done is pulled the battery and drained the CMOS battery so the BIOS forgets itself. Should I remove the hard drive and start the computer, so it forgets the hard drive, then put it back so that it treats the hard drive as a new system device? Should I throw the computer out the window?
(Unknown USB Device - A request for the USB device descriptor failed)
Massive problem I have encountered since buying a new laptop pre-installed with Windows 8.1
I have 3 external USB storage devices - 1x Corsair "Slider" 64GB, 1x HiTachi Touro 750GB, & 1x HiTachi 4TB external drive. ALL drives are coming up with the same error message and are not being recognized by Windows 8.1
The strange thing is, I also have another 2 PCs - one with Win7 and one with WinXP and the drives work without issue.
Why ALL of these drives do not work on this new laptop pre-installed with Windows 8.1?
Even stranger still is I have other thumb drives, a cheap Transcend 32GB (which is USB3.0) and a few cheapo (USB2.0) drives of various sizes by Strontium, Lexar and so on which work perfectly.
But the one that has me o.O is an expensive 64GB thumb drive called the Mach Extreme which also works perfectly with this laptop???
So all up 2x HiTachi drives & 1x Corsair thumb drive are not working and its driving me bonkers!
If no drives worked at all, then I would be seeking the manufacturer for maybe a faulty component. Dodgy USB ports, or maybe a motherboard problem. But having a handfull of drives, of various makes, sizes and both USB3.0 - 2.0 fully working leaves me scratching the old chrome dome as to what could be the issue
The HiTachi 4TB drive is my main storage device, I'm preety much stuffed if I can't get this drive working with this laptop. The same goes with the 750GB too. I REALLY need these 2 drives functional with this laptop.
I can open device manager, but whenever I try any function, search for new hardware, update drivers, disable device, etc, device manager crashes with the error "Microsoft Management Console Has Stopped Working." Other Management console programs work fine (event viewer, performance monitor).
I've run sfc /scannow half a dozen times. I've run it from a clean boot, I've run it 3 times in a row, I've run it, restarted, and then run it again. No errors found.
Faulting application name: mmc.exe, version: 6.3.9600.16384, time stamp: 0x5215ef8f
Faulting module name: devmgr.dll, version: 6.3.9600.16384, time stamp: 0x5215ebc8
Exception code: 0xc00000fd
Fault offset: 0x000000000000e3a2
Faulting process id: 0x1a8c
[Code] ......
Ive just done a clean installation of Windows 8. I checked device manager straight away. There was a listing under Other Devices with an exclamation mark listed only as "Media". Ive never seen that before so I havent a clue what it referred to. When I clicked on its properties it said Internal High Definition Audi Bus. Was this a serious issue..maybe a corrupted installation?
I wasn't sure what to do but because I had installed from Windows CD and not factory image I had to go to the Dell site and then install the Intel Chipset software. I then rebooted. The Media icon and exclamation error then disappeared from Device Manager.
Was it the Reboot of my PC that got rid of it or was it the Intel Chipset software being installed that sorted it out? Also what is "Media" referring to or is it just a generic term? Also, Im always confused as to what is the difference between an exclamation mark and the blue question mark on a white background in Device Manager which Ive seen before too?
I have a Toshiba Satellite L875-S7110 with Windows 8 that is a few months old now, and had been working fantastic until last night. Windows did an update, and now I have a red X over my sound icon that states "No Audio Output Device is installed."
Things I have tried so far to try to fix this:
I went to the Device Manager > Sound, video and game controllers. I have "Intel(R) Display Audio" and "Realtek High Definition Audio" both listed with the little yellow caution icons on them. I have tried to disable, then enable each of them seperately and both together, which had no effect. I have tried to unistall both of them, restart the laptop, and let the drivers reinstall themselves, to no effect. I have tried downloading the latest drivers from both the Intel and Realtek product sites. The one from Intel seemed to install correctly and asked to restart the computer. There was no positive change to the audio though, stil the same message. The Realtek driver won't finish installing and throws the error: "Install Realtek HD Audio Driver Failure!! [Error Code: 0x000000FF]"
If I go to Control Panel > Sound, under both the Playback and Recording tabs, it says "No audio devices are installed."
If I go to Recovery, to try to roll back my updates with System Restore, I get errors on ALL of my restore points with the following message, "System Restore did not complete successfully. Your computer's system files and settings were not changed. Details: The specified restore point is missing or corrupt. Try again using another restore point. (0x81000201)"
I'm using Windows 8.1 for couple days and I connect to the internet using a pppoe connection,at first dial ALWAYS GOT
THIS ERROR : "The modem or other connecting device has reported an error"
AT SECOND always works.
I have just upgraded from windows 8 to windows 8.1.I now find I cant back up my pc.I have tried 3 separate external drives to download to but each time I get the message I/o device error 0x8007045D.
View 3 Replies View RelatedI am having a problem with a new Dell Inspiron 15 3520 that came with Windows 8 installed and that I had been using for only a month when it went bad.
The problems started when I turned it off about ten days ago, and went I turned it back on a couple days later, and it was stuck in the apparently famous Windows 8 "Automatic repair couldn't repair your pc"/BSOD loop. I was not able to boot into safe mode. System restores made no difference. Somewhere along the line I found something that said that I had an "inaccessible_boot_device error".
From the repair menu maze, I was able to get to a command prompt. I used this to copy almost all of my files off of computer.
Chkdsk showed no bad sectors, no bad partition records, or other irregularities. sfc returned "Windows Resource Protection did not find any integrity violations". Some test (I do not remember which) showed that the boot record and BCD were fine. The Dell hardware diagnostic test showed everything working fine.
I am thinking that it is possible that the source of this was a virus or mechanical problem (I saw no evidence for either). If I had to guess, however, I would imagine that the computer stopped working after an automatic update pushed a corrupted/incompatible driver. I have seen discussions online about people having problems with NVIDIA video and/or SATA AHCI Controller drivers, and Windows 8 getting corrupted and stuck in the BSOD loop from that. At some point I saw a Windows Update Log (I am not sure where), that showed that, as Windows shut down the last time it was functional, automatic updates installed a new AHCI driver.
I tried downloading some new drivers for the 3520 from the Dell web site and installing them on the dead computer through a thumb drive and the command prompt. The downloads are all executables, however, and when I tried to run them, I get the message, "the subsystem needed to support the image type is not present". I believe that this message means that the driver executables are 32bit apps and won't run from a 64 bit command prompt. I also tried to use the "Drivers and Utilities" disk that came with my PC to do some driver rollbacks, but, I can't understand the file names or folder structure on the disk, and, when I try some to run some of the exe files ("setup.exe", for example) to get a gui interface, I get the "the subsystem needed to support the image type is not present" message.
After working on the problem for a while, I borrowed a friend's Windows 8 installation disk set. The computer will boot to the repair options off of the 64bit disk, but not the 32bit one. I did attempt a System Refresh off of the 64bit disk, and got back the message, "The drive where Windows in installed is locked. Unlock the drive and try again."
Around the time that I was messing with the BIOS settings to get the computer to boot off of the Windows 8 disk, I started getting a message "Your PC needs to be repaired - Boot Configuration Data file is missing some required information -- File:BCD -- error code 0xc0000034" at the start of my boot ups. I am not sure if I deleted a file somewhere during my repair efforts, or if I am getting this message because the computer is confused in efforts trying to boot off of the DVD. I get this message even with the DVD removed and the BIOS set to boot off of the Windows Boot Manager, however, so I am guessing that a file is now missing. And the message stops me from getting into the repair menus/command prompt any other way except through the installation disk.
I have been experiencing problems trying to back up to external hard drive this week and keep getting an I/O Error with various error messages including 0x8007045D My Hard Drive is "G" and I can see it through my computer no problem and I also have my ITunes library on it and the ITunes music is working fine.
I am getting a message in Action Centre saying my Back Up did not complete successfully and then I have the option of Try to Run Again or change back up settings. If I select Try to Run again windows cannot find the disk or network location and if I change settings "G" does not appear. It seems Back Up has detected an error on my "G" which is preventing it from running the back up.
Also in Disk Management I am prompted to initialise a disc before logical disc manager can access it so I select MBR and I get I/O device error and disk 1/G is unknown/not initialised.I have tried powering the external drive off/on and also disconnecting it from the computer but no difference and at present I cannot save anything to the external hard drive. There is a previous back up already on the hard drive but this is not accessible at present.clearing this error so I can back up again without loosing what is stored on the hard drive in particular my ITunes library.
I just reinstalled my PC, obviously with windows 8. And I can't seem to play games, i mostly play COD4 and whenever I join a game, I get an Dirextx error, or my PC just reboots..
I don't know if it has something to do with my LPC INTERFACE controller.
LPC One:
on Intel(R) ICH8/ICH8R Family LPC Interface Controller - 2810
The drivers for this device are not installed. (Code 28)
To find a driver for this device, click Update Driver.
Games one:
directx unrecoverable error
And I used to get 'AMD Driver timed out, and succesfully rebooted" something like that.
This is my setup:
OS: Windows 8
MOBO: FOXXCONN p9657aa-8ks2h
CPU: Intel Core2Quad Q6600
RAM: 2GB ddr2
GPU: Club3D Radeon HD 6970 Coolstream Edition
HDD: dont know really, 300gb
I just built a desktop with a sabertooth x79 motherboard, and am running Windows 8.1 pro 64-bit. When I click the UEFI BIOS Firmware live tile via the change PC settings>update and recovery>recovery>etc. my computer reboots normally to Windows and will not open BIOS. I have tried accessing it using the delete and f2 keys, but this does nothing either.
I am up to date in terms of my BIOS, and am definitely running UEFI and not legacy.
Last part of the message, (Device Descriptor Request Failed). I get this, in Device Manager, and I have searched for an answer on the net. Also it is a Code 43. I went through my laptop, with an HP Technician this morning, I might add at a cost of 5p/minute, for 30 odd minutes. He has said that because I had gone over to Windows 8.1 and the recovery discs I made will not load, to put back in Windows 8. I have to send the laptop back for re-installing the OS, because Windows 8.1 do not have the update for my problem. Also the R.H. USB socket has a failure ID:0GAPTK-6T7716-MFPWWK-8D1Q03. I personally think that this is all what the problem is. a duff USB. Is this a cop-out???
Does Windows 8.1 having driver WHQL problems?
I only found out the problem with the usb when I tried to download a Mobi file to a Kindle for my wife. The other usb's work OK.
I can not found Imaging Device option , due to which my integrated webcam is not working ... I am Using Dell inspiron 5520 , I have tried millions of things ...
View 13 Replies View Relatedwhen look in the device manager i get this:
[URL]
and PCI Device above this to unknown device ( i took this photo from google)
when i try to delete it back after restart or Scan hardware change
lenovo ThinkPad Edge E540 20C6006JIV win 8.1
i'm running currently on windows 8 consumer preview
i want to select boot devices (usb) to boot at startup but there is no such option in settings
this is what i did:
settings
general
advance startup
choose options: continue,troubleshoot, turn off pc
I couldn't find select boot devices there.
I installed Windows XP on disk C and Windows 8.1 on disk D, but when I turn on my computer, I automatic start windows XP. it doesn't display choice menu for me select. So what I have to do to display menu.
View 9 Replies View RelatedI have just installed Win 8.1 and can't find a way to select all files in a folder using only the mouse. I could do it under Win 7 by using Organize. Is there a Win 8 equivalent? I know about Ctrl-A but that is not what I want.
View 6 Replies View Related
