Device Manager Crashes - Microsoft Management Console Error

Jun 24, 2014

I can open device manager, but whenever I try any function, search for new hardware, update drivers, disable device, etc, device manager crashes with the error "Microsoft Management Console Has Stopped Working." Other Management console programs work fine (event viewer, performance monitor).

I've run sfc /scannow half a dozen times. I've run it from a clean boot, I've run it 3 times in a row, I've run it, restarted, and then run it again. No errors found.

Faulting application name: mmc.exe, version: 6.3.9600.16384, time stamp: 0x5215ef8f
Faulting module name: devmgr.dll, version: 6.3.9600.16384, time stamp: 0x5215ebc8
Exception code: 0xc00000fd
Fault offset: 0x000000000000e3a2
Faulting process id: 0x1a8c

[Code] ......

View 5 Replies


ADVERTISEMENT

Network / Sharing :: Device Manager Error Code - This Device Cannot Start?

Feb 4, 2013

an error message in Device Manager when installing the network attached storage drives like MyBook Live, the drives themselves seem to work fine and i have access to them (most of the time) on my home netwok, however i keep getting that little yellow triangle telling me that something is wrong, specifically:

the device manager error code is This device cannot start. (Code 10)

View 1 Replies View Related

Debugging :: Device Manager Crashes When Scan For Hardware Change?

Jan 26, 2014

My Windows 8.1 box keeps crashing in device manager upon any "refresh." For example, scanning for hardware changes, installing/uninstalling something, or updating anything. I've gone through and updated any drivers that I saw were old, but no joy. Uploading the SF Diag output as well.

View 9 Replies View Related

Computer Management Console Do Not Show Local Users And Group Snap-in

Jun 1, 2014

My computer management do not shows local user and group snap-in in windows 8.1. How to enable it, sometimes before it was enabled in it, but when i again see it, it is not there.

View 5 Replies View Related

Task Manager Crashes - Application Error

Nov 30, 2012

Recently Task Manager decides to crash on open.

After that these 2 entries are created in the Event Viewer:

Event ID: 1000, Source: Application Error

Code:
Faulting application name: taskmgr.exe, version: 6.2.9200.16384, time stamp: 0x50107c26
Faulting module name: taskmgr.exe, version: 6.2.9200.16384, time stamp: 0x50107c26
Exception code: 0xc0000005 Fault offset: 0x0000000000039924

[Code] .....

I suppose the second entry is sent by Error Reporting to MS? What is causing the crash?

View 7 Replies View Related

Setup Installation :: Windows 8.1 Clean Install - Device Manager Error

Sep 15, 2014

Ive just done a clean installation of Windows 8. I checked device manager straight away. There was a listing under Other Devices with an exclamation mark listed only as "Media". Ive never seen that before so I havent a clue what it referred to. When I clicked on its properties it said Internal High Definition Audi Bus. Was this a serious issue..maybe a corrupted installation?

I wasn't sure what to do but because I had installed from Windows CD and not factory image I had to go to the Dell site and then install the Intel Chipset software. I then rebooted. The Media icon and exclamation error then disappeared from Device Manager.

Was it the Reboot of my PC that got rid of it or was it the Intel Chipset software being installed that sorted it out? Also what is "Media" referring to or is it just a generic term? Also, Im always confused as to what is the difference between an exclamation mark and the blue question mark on a white background in Device Manager which Ive seen before too?

View 3 Replies View Related

Dell :: No Imaging Device Found In Device Manager - Inspiron 5520

Jun 19, 2013

I can not found Imaging Device option , due to which my integrated webcam is not working ... I am Using Dell inspiron 5520 , I have tried millions of things ...

View 13 Replies View Related

Hardware Drivers :: Windows 8.1 - Unknown Device In Device Manager

Apr 17, 2014

when look in the device manager i get this:

[URL]

and PCI Device above this to unknown device ( i took this photo from google)

when i try to delete it back after restart or Scan hardware change

lenovo ThinkPad Edge E540 20C6006JIV win 8.1

View 9 Replies View Related

Hardware Drivers :: How To Enable HDD Without Device Manager / CMD

Sep 15, 2014

I'm running Windows 8.1 on a SDD with a second HDD along side it. Inside the Device Manager I disabled my second HDD and rebooted my system.

Windows started as normal, but a few key windows programs have stopped working:
- Task Manager
- Device Manager (basically all control panel functions)
- Powershell (Command Prompt Works, but can't be opened with administrative rights)

The main problem is that I now can't enable my second HDD. Why the HDD is needed for these programs and how I can re-enable my HDD?

View 2 Replies View Related

Windows 8.1 - Device Manager Don't Remove Driver

Mar 1, 2014

I installed my fresh Windows 8.1 Enterprise 64 bits (build 9600), on my Acer V3-571G laptop.

When I go to device manager, and I want uninstall this driver.

--> Imaging devices
--> and Bluetooth,

When I Disable and Uninstall them, then, it's seems te drivers are gone! But when I restarts mine Laptop, the Imaging devices and bluetooth, comes back?

Why is that? How I can complete remove that? In the standard Windows 8 (not 8.1) that was possible? But 8.1?

View 2 Replies View Related

WINDOWS 8 - NVIDIA GPU Is Unknown In Device Manager (all Of Sudden)

Aug 31, 2014

Message from device manager:

Windows encountered a problem installing the driver software for your device.

Windows found driver software for your device but encountered an error while attempting to install it.

NVIDIA GeForce GT 750M

Message from NVIDIA Installer:

NVIDIA Installer failed.
Graphics Driver 340.52 Failed.

Description:After my pc freezed all of sudden while running emulators (i also had an auto windows update few hours earlier), windows refuse to detect my GPU and NVIDIA installer keep failing...Luckily i have two GPU but i cannot use the NVIDIA one due to this issue.

ASUS Tech Support Little talk with ASUS Support and they asked if i had a critical windows update recently.They asked me to try a system restore, which seem to solve the issue (i could see the GPU card but only for some minutes).Now after that i being asked to format the pc.

View 2 Replies View Related

Windows 8.1 - Bluetooth Disabled In Device Manager But It Came Back?

May 27, 2014

I think I know what "Bluetooth" is, and since I didn't think I needed it, I disabled it in Device Manager. Also, uninstalled it in Add & Remove programs. But I just ran the 'reliability monitor' / view reliability history, and saw all the "successful" installations of "Bluetooth". There were "nine" listings. More then I removed.

I have been checking what works and doesn't work to speed up and improve performance of my computer. And the plan is very much working. The computer is working great, with average boot times under 40 seconds, and my Firefox browser is 'flying'. Since I am adding some more memory in a day or two, I'm trying to see what works and do a 'reformat', complete reinstallation of the system. Setting up everything the way I want it. "Right" the first time if you will, and then be done with any testing and just using the computer.

Anyway, obviously, I'm not touching "Bluetooth". But what is it, and why does windows 8.1 think I need it. I don't have any wireless stuff, if that's what its for. And I just assumed that if I ever did need 'wireless', I would just download something.

Dell Inspiron 3647 computer, 3GHz, 4 gig's memory, all windows updates, windows 8.1.

View 8 Replies View Related

When Click On Device Manager From Control Panel It Freezes

Mar 8, 2014

When I click on Device Manager from the Control panel it freezes.

View 3 Replies View Related

Debugging :: Crashed When Scan For Hardware Change In Device Manager?

Jul 25, 2013

What is happening on the pc ? Btw it webcam is not functioning from yesterday. It asked me to connect to a camera.

View 2 Replies View Related

Hardware Drivers :: Windows 8.1 - Device Manager Don't Remove Driver?

Mar 1, 2014

I installed my fresh Windows 8.1 Enterprise 64 bits (build 9600), on my Acer V3-571G laptop.

When I go to device manager, and I want uninstall this driver.

--> Imaging devices

--> and Bluetooth,

When I Disable and Uninstall them, then, it's seems te drivers are gone! But when I restarts mine Laptop, the Imaging devices and bluetooth, comes back?

How I can complete remove that? In the standard Windows 8 (not 8.1) that was possible? But 8.1?

View 9 Replies View Related

Network / Sharing :: WiFi Adapter Not Showing In Device Manager?

Aug 27, 2014

I tried everything I know but can't seem to get back my wifi card to work.

View 9 Replies View Related

Hardware Drivers :: Windows 8 64 Artheros AR3011 Not In Device Manager

Feb 24, 2013

Bluetooth worked once. Now the device does not show in device manager under network adapters. What can I do? Is the adapter broken?

View 3 Replies View Related

Graphic Cards :: HD7970 Gives Code 43 In Device Manager / Drivers Won't Install

Sep 15, 2014

I recently bought a used Sapphire HD7970 GHZ Edition 3GB, which I got quite cheaply but it did need a little work doing to it.

Firstly the fan cable had, in the hands of the original user, somehow snapped and they had repaired it to run on a normal motherboard 4 pin fan lead. When I got the card the DIY repair had practically fallen apart but I was able to reconnect it all and both fans do spin (not sure if they are running fast enough but they are spinning and moving a little bit of air).

Anyway, second problem was the card had one of the two BIOSes flashed with an incorrect BIOS (seller said it was a BIOS of a different model of 7970) and needs reflashing.

So I fixed the fan lead, verified at least some cooling was happening and was able to get to Windows (8.1 64 bit) with it. However, in the device manager the card has the yellow exclamation mark and says "Windows has stopped this device because it has reported problems. (Code 43)". I tried installing the AMD drivers regardless but they fail with warnings though still prompt to reboot, I rebooted on the hope they might have still installed but next thing Windows blue screens (well the Windows 8 version of it) with an unhandled exception warning and does this every time until I make it do a system restore then the card operates like it did before in that it outputs a picture but won't take the driver and fails to run anything more than 2D applications.

The seller has confirmed the good BIOS is already selected (he said it won't even boot to Windows on the other one) and recommended some beta drivers but these didn't work. I have also tried using Display Driver Uninstaller to remove all traces of old drivers (and manually deleted all AMD/ATI files and registry references) but no progress.

So why am I getting the code 43? Is there a diagnostic program that can tell me exactly what is stopping the card from working? How I might get this card up and running again?

View 1 Replies View Related

Hardware Drivers :: Sony Z11 Audio Disappeared From Device Manager (realtek)

Apr 21, 2013

My audio disappeared and stopped working. my audio icon has a red x on it and when i click it it wants to detect problems (it doesn't work).

what should i do? how should I diagnose the audio? I feel like this is hardware problem as it just happened out of the blue. The audio board has a USB connection (which is working) so the connection from it to the mother board is fine.

Installing and updating the driver did nothing. I can't get the device manager to detect the hardware (scanning does nothing).

View 9 Replies View Related

Hardware Drivers :: Brother MFC-9330CDW Appears In Device Manager But With Yellow Exclamation

Jul 29, 2013

I cannot get the scanning component of my new printer to work. The "scanner" appears in device manager but has an error (yellow exclamation), it seems that the installation of the scanner network driver fails every time I try to install it. The printer prints fine just will not scan. I have it wirelessly installed and am using Windows 8.1 currently.

How to get it works as I am totally out of ideas after numerous uninstall and reinstalls.

View 9 Replies View Related

Debugging :: BSOD Memory Management Error

Mar 2, 2014

I have replaced every piece of hardware on this build and I cant get rid of the memory management bsod. It happens randomly. During games, installations, boot up, basically whenever it feels like it. I tried a different HDD as well. SSD and standard gives the same result.

PC specs are
mobo msi z87-g43
cpu i5 4570
radeon r260x
8gb corsair ram
550w psu
windows 8.1

I attached the zip file that was requested.

View 9 Replies View Related

Debugging :: Windows 8 - BSOD Memory Management Error Starting Up

May 28, 2014

My computer was fine one day then, today when I was just browsing the internet it crashes. The computer restarts and then tells me there was a problem, then when I log in I get nothing but a black screen but my mouse can still move around. sometimes when starting up it takes me to the page and asks what to do. I tried refreshing the pc first and it did nothing. I then started it in safe mode and ran sfc /scannow on command prompt and it told me there were problems but it couldn't solve some of them it gave me something to look up but once again it crashed and restarted before I could read it.

I've had the computer for just over a year and it has always had windows 8.

View 1 Replies View Related

Debugging :: Memory Management Windows 8.1 64bit - Keep Getting Blue Screen Error?

Sep 15, 2014

i keep getting blue screen error every 2-3 days

View 1 Replies View Related

Hardware Drivers :: How To Uncheck Show Compatible Hardware Device Manager

Dec 13, 2013

I am trying to install a driver for the Epson perfection 1200U on my grandpa's new windows 8 PC. Problem is that the scanner is too old and epson doesnt provide a driver for this scanner for windows 8. But how to uncheck "show compatible hardware" in device manager when you are trying to update drivers on a specific device.

I get there by right clicking on the device, selecting properties, "browse my computer for driver software," then "let me pick from a list of device drivers on my computer," then after that the window that appears does not have an option to uncheck "show compatible hardware." And so I can't continue

View 3 Replies View Related

Hardware Drivers :: How To Backup Drivers From Device Manager / Installed Dvr

Jul 22, 2014

I've installed Microsoft Windows 8.1 Version 6.3.9600 Build 9600 on my HP 430 Notebook PC with 1 GB RAM and Pentium CPU @ 2GHz 2 Cores.

Display drivers are not working properly (i.e., everything appears bigger and unclear), earlier I'd successfully updated the display drivers and made it work using Device Manager. making a backup of the drivers (may be in .inf format) from the installed drivers so that I don't have to update it every time I re-install it.

View 7 Replies View Related

Command Prompt (Admin) - Console Box Vanishes Within A Second

May 15, 2014

Everytime I try to use the above command, the console box vanishes within a second.

I have also tried to install chrome, the console opens and closes within a second, hence not able to read any messages.

I have full administrator right. No viruses

View 9 Replies View Related

Debugging :: Boot Manager Has Recovered From Critical Error?

Jan 17, 2014

Went to turn on my computer today and got a screen with the Dell Logo and a message "Boot manager has recovered from a critical error." It went on to say there were missing or corrupt files that were restored from the default configuration. I did a Google search and found absolutely nothing about this error. This laptop is only 2 months old. I couldn't find anything in the event viewer either.

View 1 Replies View Related

Error 711 - Couldn't Start Remote Access Connection Manager

Aug 4, 2013

I got Huawei E220 3G USB dongle. I couldn't use it to connect to the internet on Windows 8 Pro x64.

Its giving Error 711. Saying Remote Access Connection Manager couldn't start. I went to services and tried to manually start it. But Its giving Error 20 as below.

View 2 Replies View Related

ODBC Driver Manager Error - Database Source Name Not Found

Jun 25, 2014

I have been trying to install a product called Thumbsplus which was giving me a ODBC Driver Manager Error - Database source name not found and no default driver specified error.

After trying a fews things I starting looking at the ODBC Data Source Manager in windows 8 and noticed that I could not access the System DNS tab. ( I would get a warning " you are logged on with a non-administrator privileges. ) even thought the account Is an administrator account. So I logged off and entered in as administrator and still the same message.

Something is wrong and I suspect it has little to do with the thumbsplus program as I should be able to enter into the system dns tab without receiving this error message.

PS: If I say OK after the dialog message the manager with open up and allow me to click the add button but since I dont know how to add the apropriate info there I did not go further, hence to say the error message probably did cause thumbsplus to not install correctly.

[URL]

View 9 Replies View Related

Error 711 / Couldn't Start Remote Access Connection Manager

Aug 4, 2013

I got Huawei E220 3G USB dongle. I couldn't use it to connect to the internet on Windows 8 Pro x64.

Its giving Error 711. Saying Remote Access Connection Manager couldn't start. I went to services and tried to manually start it. But Its giving Error 20 as below.

View 2 Replies View Related

Accounts :: Cannot Switch To A Microsoft Account / Error 0x80070005

Jul 18, 2014

In Windows 8.1, when trying to change from regular password to Microsoft Account, in the end of the process (I pass it all the way to the last step) I get the message:

"Some settings are managed by your system administrator" and code 0x80070005.

I have Administrator account (there is only one account on the computer)

I bought a computer that was used in the store (last item). Apparently they have put some protection that limits changes (Group security?), and did not remove it when I took the computer.

I don't have "pro" so I don't have Secpol.msc .

how to remove these limitation, and restore the default settings?

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved