My computer management do not shows local user and group snap-in in windows 8.1. How to enable it, sometimes before it was enabled in it, but when i again see it, it is not there.
View 5 RepliesI can open device manager, but whenever I try any function, search for new hardware, update drivers, disable device, etc, device manager crashes with the error "Microsoft Management Console Has Stopped Working." Other Management console programs work fine (event viewer, performance monitor).
I've run sfc /scannow half a dozen times. I've run it from a clean boot, I've run it 3 times in a row, I've run it, restarted, and then run it again. No errors found.
Faulting application name: mmc.exe, version: 6.3.9600.16384, time stamp: 0x5215ef8f
Faulting module name: devmgr.dll, version: 6.3.9600.16384, time stamp: 0x5215ebc8
Exception code: 0xc00000fd
Fault offset: 0x000000000000e3a2
Faulting process id: 0x1a8c
[Code] ......
In all editions of Windows 8, there is the local group policy editor? If so, how do I find it?
View 4 Replies View RelatedIn all editions of Windows 8, there is the local group policy editor? If so, how do I find it?
View 4 Replies View RelatedI want to setup my build to change reg key(s) so that each new user that logs on sees the file extensions in Windows Explorer
Checking this thread Show File Extensions and Hidden Files for all Users - Windows 7 Forums I hoped it would be a case of changing one key in HKLMsoftwaremicrosoftwindowscurrent versionexploreradvancedfolderhidefileext but I cannot get it to work for each new user
(Is it the same for Windows 7 and 8 or just 8 specific?)
I live in an apt building that has freeWIFI. There are about 4 wifi connections Ican switch to when one is lagging. I would like to see the number of usersaccessing each connections.
Is there any freeware system monitoring tool available that will show me #number of users on each wifi connected in my building. I am running Win 8.
Either with my startup today, or sometime in the last day or two, all my drives/partitions in Windows Explorer (and XYplorer) have lost their labels and are now showing as "Local Disk." Looking in Windows 8 Computer Management and EaseUs Partition Manager, the labels are there, as shown in the screenshot. I ran all three main repair modules of Yamicsoft Windows 8 Manager and there have been a few reboots, but still the same.
View 8 Replies View RelatedIt is possible update for all users the Windows Store apps with a local account belonging to the Administrators group? Then, I believe that the management of updating of the Windows Store apps can also be managed only by administrators. Right? If so, how do I do this?
View 5 Replies View RelatedI am trying to find a solution to transferring large files (100+GB) between myself and a client of mine at a different location through the internet. The easiest one I have found was through a Private Network through Logmein's Hamachi, as you can browse other connected computers' files through this network.
Of course, to show the shared drives by the host computer, you need to input a username and password through the UAC. Obviously, if I insert my own username and password, I can see the folders I've shared. However, how do I configure a username/password for my client? Are these users the same as local users? I would like to avoid having to make a local user for him on my own computer.
Just for reference, I have no control over my network I am connected to, so no FTP, no port forwarding etc.
OS: Windows 8.1
I'm having a hard time trying to create a partition on the main HDD, in order to perform a Windows 7 installation, since Windows 8 is giving me several compatibility problems, and many software developers (e.g. Adobe Systems) said to me that Windows 8 support is not available since it isn't officialy released yet.
According to Windows 8 "Computer Management" utility (very similar to the Win7 one) the maximum size of available shrink space is up to 86 GB. Nevertheless I desire to create at least a 250 GB partition (HD is 1.5 TB and free space is 620 GB).
I found out on the internet this could be due to MFT files. I followed an old guide, run the Disk Cleanup Wizard, disabled system restore, the pagefile, the kernel memory dump and the hibernation mode. I morover run several instances of 3rd party defrag softwares such as Perfect Disk: I run the SmartPlacement, the defrag, the consolidate free space and the Prep for shrink tools, none of them with a positive result.
Though MFT files seems to be at a right place, around 5 GB from the disk beginning.
I just bought a 1TB hard drive for my pc running windows 8 and now my roomate wants to use my computer. Is there any way to separate the HDD in two? 500GB designated to him and 500 to me? There should be a way to do that because I dont want my roomate to see my files on the (local disk) which is what it's called right now.
View 4 Replies View RelatedI had recently activated my Administrator's account on Windows 8. But I was tired of having to put in the password each time and I made it where it would bypass that by hitting the windows key plus the x key then clicking on the Command Prompt (Admin). I put in "control userpasswords2" and hit 'enter', then I unticked the box that says "Users must enter username and password to use this computer" then click apply and restarted my computer.
I need more privacy on my computer and I want to have it where people have to sign in with the user name and password to use my computer. But when I do all the same things and tick the box again that says users have to use the username and password etc... it doesn't seem to work. It still doesn't require my username and password.
How to specify which users can shutdown the computer from registry.
Using the local group policy this setting would be: Computer Configuration -> Windows Settings -> Security Settings -> Local Settings -> User Rights -> Shutdown the Computer
By default Administrators, Backup Operators and Users. The problem is that I need to change this settings form a script and I don't know where to look for it in the registry. I was thinking of using the reg add command in the script but I don't know what to change.
I tryed to use a program called regshot to analyse change to registry, so I made the change on Group policy and then looked at the changes but came to no conclusion.
In the last day my computer has disappeared from my local network. i have itunes home sharing and folders i share from this computer but suddenly gone. It is a problem with the firewall because when i turn it off it works right. i DID NOT MAKE ANY CHANGES IN THE FIREWALL AT ALL. Running windwows 8.1 64 bit. The only AV i am running is windows defender
View 9 Replies View RelatedI've had this issue with chrome where, I'll close it and reopen later to find the error "Chrome didn't shut down correctly, click Restore". I'm trying to delete the local google folder on my computer(then reinstalling) in the program files(x86) and It will not let me. Saying "Folder access Denied" I require permission, even though I'm the administrator. I came across this site:Take Ownership Of Files And Folders In Windows 8 where they offered a way to add a "Take ownership" option to my menu options and included a uninstall reg file.
I already saw a similar thread on this site : Take Ownership - Add to Context Menu in Windows 8 but did not download from it b/c I did not know how to remove the reg file. I tried the take ownership from the first site and it didnt work, I used the uninstall reg file and now i'm frustrated and back to square one.
I can't even reinstall chrome at all b/c of some unspecified error, I just want to be able to delete the google folder on my computer to do a clean install.
In Windows 8, it is possible to run a command whenever the login screen of the last user is displayed in a local computer? This command should always be run with elevated rights and just before this screen appears.
View 3 Replies View RelatedWhile trying to add folders to the Search Index, I was informed the Windows Search process was not started. When I go to the Services Console and attempt to manually start, I am given the error:
"Windows could not start the Windows Search service on Local Computer.
Error 2: The system cannot find the file specified."
So I opened an command prompt with administrative level access to run sfc and received the following error after it was complete:
"Windows Resource Protection found corrupt files but was unable to fix some of them. Details are included in the CBS.Log windirLogsCBSCBS.log. For example C:WindowsLogsCBSCBS.log. Note that logging is currently not supported in offline servicing scenarios."
The CBS.log file is too large to upload to here or paste into pastebin, so here is a dropbox upload of it:
What other way, aside from a repair install, do I have to fix my missing files and services?
Specs:
Processor: Intel i5 2500k @ 3.3GHz
OS Name: Microsoft Windows 8.1 Preview with Media Center
Motherboard: Z68A-D3H-83
Installed Physical Memory: 8.00GB
In Windows 8, it is possible to run a command whenever the login screen of the last user is displayed in a local computer? This command should always be run with elevated rights and just before this screen appears.
View 6 Replies View RelatedEverytime I try to use the above command, the console box vanishes within a second.
I have also tried to install chrome, the console opens and closes within a second, hence not able to read any messages.
I have full administrator right. No viruses
I have a number of special fonts (all are .ttf) that I installed, and some that came with software for use with the programs. All of these fonts worked fine when installed on my Windows 7 64-bit computer.
I have installed all of these fonts on my Windows 8 64-bit computer, and some of the characters on the fonts do not show. Windows has substituted other characters in place of these.
Yet when I open the font in a third party program like Font Creator, all of the characters on the font appear true.
Is there a setting in Windows 8 that I need to adjust so the characters will show as they are supposed to?
I have a Dell Inspiron 660 PC w/windows 8.1 no matter what I plug into the usb port I cannot find it on my computer. I hear the connect/disconnect sound, but can't find anything on the computer as to where it is at or how to open it. The device is a storage device with photos. It also does the same thing with my phone. I hear it, but nothing opens or comes up anywhere.
View 3 Replies View RelatedI have two drives which have exactly the same files on them. I have opened the drive and selected everything and gone properties. The sizes are the same.
If I then go to "This PC" it shows that 1 drive has used 50GB more than the other.
Here is a screenshot of the information I am seeing.
Is there a reason this would be?
i installed win7 on my SSD (like 22gb drive) in my asus today. Now, under my computer, it shows nothing but the SSD. it doesn't show my 500gb hard drive.. Im pretty sure its because of something i didnt do in the setup. What should i do to get it to show up? i really really really don't wanna re install windows because i got all the drivers and installed programs..
View 9 Replies View RelatedI originally built my computer with two 1 TB hdd as RAID1 with Windows 8 Pro 64 Bit as the OS.
The boot files eventually became corrupted. I could not reinstall Windows 8 on the RAID 1 array. So I then purchased two 2 TB HDD and created a new RAID 1 array which Windows 8 readily loaded onto.
I then added the two original 1 TB HDD to the computed to use for photography and media storage. They also showed when booting my computer as a separate RAID 1 array, but were listed as "repair." I went into the RAID BIOS and separated the array. I connected only one of the 1 TB HDD, and the drive was the "E" Drive in my computer, but I was unable to access it. "E: is not accessible. Access is denied." Disk Management showed the drive as DISK 1, but as two partitions: System Reserved 350 MB NTFS Healthy (Active, Primary Partition) and 931.17 GB NTFS Healthy (Primary Partition). I used Diskpart to create a Primary partition and format the disk. That HDD now works fine. Unfortunately I did not backup the data on that HDD, which I would like to have.
I did try the second mirrowed 1 TB HDD on the computer before formatting the first and was able to access all of the data on the HDD.
Now after formatting the first 1 TB HDD, I added the second 1 TB HDD from the original RAID 1 array back onto the computer, wanting to retrieve the data on it. This HDD does not show on My computer and is not assigned a drive letter. However the HDD is listed in Disk Management as DISK 2 and partitioned into System Reserved 350 MB NTFS Healthy ( active, Primary Partition) and 931.17 GB NTFS Healthy (Primary Partition). Looking for retrieving the data on this disk, copying it to another HDD, and then creating one partition on this HDD? How to assign the HDD a drive letter. I would like to format this HDD after copying the data, and have my computer assign it a drive letter so that I can use it.
I have a local network at home with 1 router, 5-6 computers and a few gadgets connected through WiFi.
I have a problem with one of the computers with Windows 8.1, let's call it Computer A. When I boot it, it is connectable from the other computers using its local IP address. But after a few hours it usually disappears from the network, and I'm only able to connect to it using the router's external IP and port forwarding.
By "disappears from the network", I mean that it's still connected to the router and to the internet, but none of the other units on the network is able to connect to it in any way.
Computer A can always connect to the the other computers on the network and to the internet.
The problem is solved if I reboot Computer A, so at the moment I have a scheduled task to reboot it every night. Unfortunately, sometimes it disappears from the local network after only a few hours after boot.
Turning the firewall off on Computer A doesn't work.
Below is the result of ipconfig /all on Computer A:
Code:
C:WINDOWSsystem32>ipconfig /allWindows IP Configuration
Host Name . . . . . . . . . . . . : bjarte-media2 Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : getinternet.noWireless LAN adapter Local Area Connection* 2: Media State . . . . . . . . . . . : Media disconnected
[Code] ......
I have organized the apps on my start screen and named/renamed the groups they occupy. I have decided that I want to combine the apps in two of the groups into one group. How can I delete one of the groups and move their apps to the other group?
View 9 Replies View RelatedI just bought a new laptop, it`s a HP Pavilion 15-n221so, and I want to disable OneDrive. I`ve read about that I can disable it using Group Policy. When I`m trying to open it in run, with the command "gpedit.msc, I just getting an error that the system can`t find it. I have a norwegian Windows 8.1.
View 1 Replies View RelatedI have relatively new PC with Windows 8.1 but recently I am getting a message on start up that "Windows could not connect to Group Policy service" . This then asks me to look at the Event log. I notice that the Event log has " Special log on " every time I log on . Are theses messages related ? Is this normal ? Have I a bug of some description? I have ran Norton 360 and malwarebytes - nothing reported.
View 2 Replies View RelatedI've looked at the Group Policy Search with Azure, but I don't have a clue as to how to find the correct key to add to the Home Group Policy in the registry. I need to get rid of whatever policy is causing this error message every time I try to install Corel's PaintShop Pro x5 in D:Program Files (x86):
This installation is forbidden by system policy. Contact your system administrator.
This "sounds" like it might be what I need, but I wouldn't dare mess with the registry without being sure.
"Configure software Installation policy processing" Group Policy Search
But whatever I need to use - I would need hand holding on how to use it!
My main PC is a desktop running Windows 7 and my homegroup was set up on this PC. I have a laptop running Windows 8 and joined the homegroup - seemingly successfully as the control panel indicates that it is in the group.
On the W7 desktop. The homegroup icon lists the laptop and allows me to access the laptop files. The network icon lists both the desktop and the laptop. I could also access the laptop files this way, but do not need to as I can access them via the homegroup icon.
On the Windows 8 laptop. The homegroup icon just lists the laptop user name and then the laptop itself. The desktop is not listed. The network icon lists both the laptop and the desktop. This allows me to access the desktop files, but I would prefer to access them via the the homegroup icon.
Even though I am a member of the Administrators group, when I try to create a symbolic link I get the message:
"You do not have sufficient privilege to perform this operation."
In Windows7 I am also a member of Administrators and have no problem creating symbolic links.
why this is not working in Windows8?