I have two drives which have exactly the same files on them. I have opened the drive and selected everything and gone properties. The sizes are the same.
If I then go to "This PC" it shows that 1 drive has used 50GB more than the other.
Here is a screenshot of the information I am seeing.
Is there a reason this would be?
Does making a new drive by shrinking volume of c: drive and making a volume of the new drive slow down your computer? Does using space on the new drive slow down your computer either?
View 5 Replies View RelatedI have a Dell Inspiron 660 PC w/windows 8.1 no matter what I plug into the usb port I cannot find it on my computer. I hear the connect/disconnect sound, but can't find anything on the computer as to where it is at or how to open it. The device is a storage device with photos. It also does the same thing with my phone. I hear it, but nothing opens or comes up anywhere.
View 3 Replies View Relatedi installed win7 on my SSD (like 22gb drive) in my asus today. Now, under my computer, it shows nothing but the SSD. it doesn't show my 500gb hard drive.. Im pretty sure its because of something i didnt do in the setup. What should i do to get it to show up? i really really really don't wanna re install windows because i got all the drivers and installed programs..
View 9 Replies View RelatedOn my windows 8.1 PC whenever I plug in any USB pen drive the thumbnail for the device is always an image of a Sandisk Cruzer Titanium as is the identity when I go to the safely remove hardware toolbar.
The Sandisk probably was the first pen drive I plugged into the machine when new but surely it should be picking up details of subsequent devices or at the very least showing generic details.
Have you found that the hard space of your computer was gradually eaten up by all the files you unlikely know? If you’re haunted a lot by such a problem and want to stop it, you just need to download Colorful Disk Clean and totally relax yourself. Colorful Disk Clean will scan all the folders or files and recover the disk space whenever you want.
The color-coded sunburst map clearly displays both the hierarchical structure of files and folder and the relative size of each. What’s the most important, with a simple drag and drop, you can remove all the system files and other items that you no longer need.
My computer system is windows8. When I try to download something or just run some programs, a warning would show up and said that I have low disk space. How can I clear my disk space? Also, I wonder a simple disk defragmentation could be enough.
(Do I need to use a disk cleaner like Colorful Disk Clean? This program looks useful).
For some reason, the disk space usage bars in 'My Computer' are missing. Although they should be visible in 'tile view', I can only see the drive icons, not the bars. Interestingly, When I open a file in e.g. Word I can see the bars in the open file dialog (also in 'tile view'). I've already tried resetting the folder view settings, but without any luck.
View 9 Replies View RelatedI have a number of special fonts (all are .ttf) that I installed, and some that came with software for use with the programs. All of these fonts worked fine when installed on my Windows 7 64-bit computer.
I have installed all of these fonts on my Windows 8 64-bit computer, and some of the characters on the fonts do not show. Windows has substituted other characters in place of these.
Yet when I open the font in a third party program like Font Creator, all of the characters on the font appear true.
Is there a setting in Windows 8 that I need to adjust so the characters will show as they are supposed to?
I have a computer running windows 7 now that has 5 drives (3x2TB and 2X3TB) that act as my home media storage center. I have TV shows split between 3 drives and movies on 2 drives. When I access these from other applications, it can be hard to group everything together and if I run out of space somewhere, it is a nightmare.
Win 8 pro x64 is on it's way, but wanted to know how to set up Storage Space. I have looked through the tutorials, but cannot figure out how to set my system up, if I have media in different spots.
Do I create 1 Storage Space and all 5 drives are in it then I just have to point to if from my other applications to get to the data? Do I create a storage space for each type of media (music, TV shows, Movies, etc.)? When I add a drive to a storage space, how do I get it to include the files within the storage space and not just use the "empty" drive space?
I am not looking for redundency protection, but to make my handling of data across all the drives easier (e.g. "Did I put my Futurama series on drive 1 or 2...Did South Park make it on to one drive or did I have to split it up?)
My computer management do not shows local user and group snap-in in windows 8.1. How to enable it, sometimes before it was enabled in it, but when i again see it, it is not there.
View 5 Replies View RelatedHow I can create a new hard drive without using space on the windows c: drive ...
View 9 Replies View Relatedi've just formatted my HDD partition where os was. After that I've also deleted the respective partition and now I can not do anything to install the os in that partition, the partition now is unallocated space. I was using Windows 8.1 before all this mess.
View 9 Replies View RelatedI am working at a desktop pc with Win 8.1 installed. When typing, spaces appear randomly (also in the middle of a word - it is not as if the space key had got stuck). Nevertheless I got a new keyboard but the same problem occurs. I removed the keyboard driver - did not work. The keyboard is not wireless, plain USB. Seems though, as if the fault appears only in programs of the MS office suite.
View 3 Replies View RelatedI have dual-booted Windows 8.1 and Windows 7. I have managed to free up a significant amount of space on Windows 7 and was wondering if it's possible to add some of the freed space to my Windows 8.1 partition?
If pic won't resize, cope and paste: "[URL] ....."
I found that whenever I open an app, such as 'Reader' they remain open even after I switch to something else. I know I could close them by swiping the upper left of the screen and select 'Close'.
Is there a way to have them close altogether when I'm done with them?
2 out of 3 USBs worked on Win 7 on same PC but wont after installing Win 8.
They all work no problem on my netbook with Win 7 installed. Here is the pic about problem: [URL] ....
As you can see, they wont show up but they are recognized...:/
I tried reformatting them on netbook, still nothing. And tried allocating them drive letters and formatting them but error shown in pic above pops up ....
Out of those 3 USBs 2 are the same (same model)! But 1 works and other doesn't...
I have this problem were external hard drive do not show up on my PC.
First my I put my friends in and it did not work, then I went out and brought one myself (different brand) and it does not show up.
Windows automatically installed the drivers it said it even know what time of external it was. But now it doesn't appear in explorer. What should I do. It appears in the device manger list, but how do I access it?
I am trying to import my contacts to the phone, which I gather can be done with a bluetooth connection via some sort of PIM that the bluetooth software recognizes. For the life of me I can't find any explicit reference to any particular PIM software that the Windows 8 bluetooth Properties dialog recognizes. Or, have I misunderstood the capabilities here? Do I have to buy and install Outlook?
I am unfortunately using Thunderbird as email & contact manager, but I've exported my contacts via .csv in the past so If I can find the appropriately compatible PIM for Windows 8 Bluetooth I think I can muddle through.
1 year ago I had a desktop PC with two HDD in it, one is 500GB,the other is 1TB. I bought the PC with only the 500GB HDD in it, but after buying the 1TB HDD, I always installed OSes in it. For many time I didn't get any problem, until I accidently swapped the plugs for the HDDs after I cleaned the cabinet. My Windows 7 wouldn't boot even though I had did "nothing". I realised my problem and just swapped it again and the problem was gone. After reading about it, I learned that it was caused because of the MBR, which was on the 500GB HDD. No problem till MY PC died and my family ran into money problem which prevented me from buying a new PC so I started using a netbook for everyday PC use. I had to trow out all my PC hardware, except for my two HDD which I kept safe in my wardrobe.
The thing is, I have all my precious music, games and stuff on those HDD, so, since I don't have the money to build a new PC, I instead bought a IDE/SATA to USB converter, which worked fine on the 500GB HDD. Problem is when I plug the 1TB HDD, which won't allow me to open the partitions (even though they show perfectly both on My Computer and on Computer Management). On Computer Management, they all show as RAW partitions, I don't know what to do. I know some programs will only recover files from they extensions, but I would like to have all my files untouched, the way they were, so I could back up important files on my netbook, and let the HDD alone waiting for the day that I can finally buy a new PC.
I installed windows 8 in HDD 1tb Seagate. Then I bought Corsair 240 SSD drive and fresh installed everything there. Now if I boot from SSD drive my Seagate won't show up and I have tried other cables I have 5 hard drives in my system. It shows up in boot menu but won't show up in Disk management or anywhere else.
Then I connected it to the USP port and disk shows up no problem. I would like to leave this copy in as a backup so I don't want to delete it. I can boot into these windows but then my Corsair SSD drive won't show up. Whats up here.
I installed Windows 8.1.
My computer has an SSD which has the installation. My computer has a hard drive with file.
The hard drive shows up on Disk Management. The hard drive does not show up on File Explorer.
I installed Windows 8 Pro on a GPT partition. I have 234GB of SSD with 87% free space according to Disk Management. I am trying to create a 4GB primary partition for Intel Rapid Start but the Disk Part shows i have no space available in that drive and would not let me create the partition. Why would that be?
View 1 Replies View RelatedI'm running windows 8.1 x64. When I insert a usb flash drive into my PC, it takes maybe over 2 minutes before windows "finds" it and has it appear in windows explorer. I have the latest BIOS for my motherboard and I don't think there are any specific usb drivers to install.
View 2 Replies View RelatedI currently have a two monitor set up.
On boot up the left monitor (desktop only, metro is fine) has incorrect DPI scalling, where some items appear large and blurry. This includes the menus (eg explorer), desktop programs and the cursor. The taskbar and metro interfaces are fine.
Changing any graphics settings fixes the problem - eg. if I change the main monitor and change back the problem goes away. Equally, changing resolution and changing back fixes the issue. I've only ever had the problem with 8.1. I fixed the problem/it went away after a while, but since doing a reformat the problem is back.
I have changed the setting in text size and other items, unchecking the "let me choose one scaling level...." and have put the slider on "smaller". In PC settings, the DPI is set to smaller (but this is for the metro interface).
I upgraded to 8.1 and everything is fine, apart from these 2 issues: -
1. If I start a maintenance run manually via Control Panel, Windows will start defragging my SSD, which obviously shouldn't happen. You can see it happening here, even though the drive is correctly identified as an SSD: -
I believe this bug was an issue in Windows 8 as well.
2. The System Reserved partition shows up in Optimise Drives, as it did in Windows 8, but I am unable to optimise it. If I select it and click the Optimise button, the Optimise Drives window disappears, reappears, but nothing has happened. It still says "Never run" and "Needs optimisation" next to it. Also, that causes an error to show up in Event Viewer each time I try it, as you can see here: -
The error is the same each time: -
The volume System Reserved was not optimised because an error was encountered: The parameter is incorrect (0x80070057)
Also in that list of logged events you can see where events have been logged saying that my C drive has been defragmented and not just retrimmed.
I have tried running chkdsk on the drive. I've tried running System File Checker. I have tried this command: -
DISM.exe /Online /Cleanup-image /Scanhealth
Everything checks out fine and there are no errors.
Is this something I should be concerned about? Issue 1 only occurs if you manually start a maintenance run from Control Panel and it appears to be a bug in Windows, but that's easily solved by just letting maintenance run automatically on a schedule. It's issue 2 that I'm more concerned about. My system is running great and I don't know if not optimising that small 350 MB System Reserved partition really matters.
I am trying to install a driver for the Epson perfection 1200U on my grandpa's new windows 8 PC. Problem is that the scanner is too old and epson doesnt provide a driver for this scanner for windows 8. But how to uncheck "show compatible hardware" in device manager when you are trying to update drivers on a specific device.
I get there by right clicking on the device, selecting properties, "browse my computer for driver software," then "let me pick from a list of device drivers on my computer," then after that the window that appears does not have an option to uncheck "show compatible hardware." And so I can't continue
Basically my icons are fubar! :
More detail:
Current Setup/programs that affected this issue:
RDP
Stardock Fences 2
Super Street Fighter 4 Arcade Edition
Basically I RDPed into my home PC, tried to play some Street Fighter 4. Things worked, all was happy, and the Gods rejoiced. Until I returned home. Upon trying to log into my PC the desktop showed only partially complete (by this I mean the icons were there but they were in the process of moving to the "fence"). Explorer gave me the wonderful wait symbol and I could not interact with my PC. Fast forward 10-15 minutes, still no change. CTRL-ALT-DELETE worked kind of: it opened up after a few moments/minutes. From there I rebooted thinking that would fix it. Nope.
Eventually I got into the cycle where the desktop would load, fences would load, explorer would lock up, I'd click my mouse, explorer would crash and restart. I uninstalled fences, everything worked... except the icons. Reinstalled fences, same problem as before, crashing and whatnot. Uninstalled it again. And that's where I'm at currently.
I've attached a couple images, the first one shows the current state of the icons. Some have their icons, some don't. All are valid shortcuts. I'm a bad person and I have actual programs on my desktop and even those have the generic white page icon.
The second screenshot shows the file in its directory, with properties and change icon. No matter how many times I do that, nothing will change.
I've spent a couple hours googling and my first thought was it was the icon cache so I decided to nuke it (I found some instructions on these sites with copy/paste commands, it was so easy even a cave man could do it).
So I'm currently frustrated beyond all belief at my PC on a night when I just wanted to come home, watch some movies and play a couple games after an annoying day at work. Instead I spent all evening trying to fix this problem and getting no where. Woe is me?
I should add without Fences (and I removed all my other customization stuff and nuked anything that integrated with the right click shell thingy which I can't remember what it's called) my machine is running nice and smoothly (so far) aside from the icons.
I just noticed that my keyboard layout appears to be incorrect, and have been unable to resolve it after some googling around. The keyboard layout of my laptop is the UK English, but even with this setting in the language settings of windows I still am stuck using the US English version, so for example my @ and " are swapped around, and where the pound sign is.
I've tried downloading new language packs, and switching to the US keyboard (no change) and back to UK (still no change).
Windows 8.1 ... Noticed shortly after upgrading the Asus VivoTab Smart to Windows 8.1 (from Windows 8) -- that sometimes the system's date and time will be incorrect after a shut-down, turn on cycle. Sometimes the clock is as fast as three hours, but others much longer. Interestingly, if you go into PC Settings > Time & Settings and then toggle off the "Set time automatically" option, and then toggle it back on, the time and date are immediately corrected. However, the time would again be wrong after a shutdown. If the tablet is restarted, though, the time is correct again.
THE SYSTEM: Windows 8.1 (upgraded from Windows Store). Intel Atom processor.
WHAT'S BEEN TRIED: I:
1. Stopped the Windows Time service, registered it again and restated it. The issue remained. I entered the desktop and clicked on the time in the lower right-hand corner of the screen. From here I confirmed the time zone was correct and changed the date and time. That fixes the problem during the current session, but the time/date are again wrong on reboot.
2. Tried Safe Mode. In Safe Mode, the time is correct and stays correct.
3. Tried Clean Boot. In Clean Boot, with all non-Microsoft services disables, the issue returns and the time is wrong again.
THE BREAKTHROUGH THAT BEGS FOR AN ANSWER: While reading this thread, I read up on Windows 8's Fast Startup. Just on a lark, I went into the Power settings area of the Control Panel and turned off Fast Startup. Now the clock is correct. There's a downside , of course, to this in that shutdown and startup is notably slower.
The tablet now keeps perfect time -- but cannot have Fast Startup - which is a bummer for a tablet.
QUESTIONS:
1. Is this is hardware issue? Asus is offering an RMA -- but hate to add to a landfill when this is fixable with software.
2. Is there a way to check the BIOS clock on a Windows 8.1 tablet ? I believe it's a UEFI system....
3. Is there a way to fix this so fast startup can be used -- and have correct time?
4. Is this a known issue?
5. Is there a way to make sure the Windows Time service is activated in a Fast Startup.
I tried to upgrade to windows 8 through the store and if failed horribly, the pc refused to boot a an error code I that don't remember so I decided to wipe everything and install Windows 8.1 from a usb drive. Everything was fine for the past week and a half until 2 days ago when the disk defragmentation tool decided to stop working, I ran the tool many times after installing 8.1 and it has always worked but now I get a 0x80070057 error which should mean that the size of my partition is wrong. I did a chkdsk /r /f that took 2 hours to complete and it didn't find any errors and I also ran a sfc /scannow with no luck.
Here is a screenshot
After spending some time googling for the issue I found out that there are many Windows 8.1 users with the same issue and on the microsoft forums no one seems to be able to fix this. From what I understand this seems to be related to the size values of the partition which according to the defragger are wrong but the tool was working before and I didn't edit the partition in any way.