when look in the device manager i get this:
[URL]
and PCI Device above this to unknown device ( i took this photo from google)
when i try to delete it back after restart or Scan hardware change
lenovo ThinkPad Edge E540 20C6006JIV win 8.1
Last part of the message, (Device Descriptor Request Failed). I get this, in Device Manager, and I have searched for an answer on the net. Also it is a Code 43. I went through my laptop, with an HP Technician this morning, I might add at a cost of 5p/minute, for 30 odd minutes. He has said that because I had gone over to Windows 8.1 and the recovery discs I made will not load, to put back in Windows 8. I have to send the laptop back for re-installing the OS, because Windows 8.1 do not have the update for my problem. Also the R.H. USB socket has a failure ID:0GAPTK-6T7716-MFPWWK-8D1Q03. I personally think that this is all what the problem is. a duff USB. Is this a cop-out???
Does Windows 8.1 having driver WHQL problems?
I only found out the problem with the usb when I tried to download a Mobi file to a Kindle for my wife. The other usb's work OK.
Message from device manager:
Windows encountered a problem installing the driver software for your device.
Windows found driver software for your device but encountered an error while attempting to install it.
NVIDIA GeForce GT 750M
Message from NVIDIA Installer:
NVIDIA Installer failed.
Graphics Driver 340.52 Failed.
Description:After my pc freezed all of sudden while running emulators (i also had an auto windows update few hours earlier), windows refuse to detect my GPU and NVIDIA installer keep failing...Luckily i have two GPU but i cannot use the NVIDIA one due to this issue.
ASUS Tech Support Little talk with ASUS Support and they asked if i had a critical windows update recently.They asked me to try a system restore, which seem to solve the issue (i could see the GPU card but only for some minutes).Now after that i being asked to format the pc.
First my computer when bought came pre installed with Windows 7. As soon as Windows 8 came out I upgraded to Windows 8. My system is BIOS not UEFI. I have about 3gb ram and 500gb hdd drive 2.20 ghz processor. Windows 8 runs really smoothly. So recently 2-3 days ago I decided to dual boot Ubuntu with Windows 8. Before when I had Windows 7 I dual booted it with Windows 8. So now I thought about dual booting with Ubuntu 12.04 LTS. The Installation process was fine until I take out the installation usb with Ubuntu and whenever I try to restart it the PC would hang on the oem screen for a while which is ridiculously long.
Then when I would boot into Windows 8 and sign in I would get a notification message saying the last storage device you plugged in isn't found. I went to the device manager in Windows and it would say an unknown device has been found and even if I tried to Uninstall it would come back again. I tried searching for updates but nothing came up. I googled it and got no results. What annoys me the most is the PC hanging on the oem screen. Right now I fresh installed Windows 8 so it's the only OS running at the moment. But I want Ubuntu 12.04 LTS because of git, ssh and all the server side stuff. I have also posted the error screenshot for more info.
an error message in Device Manager when installing the network attached storage drives like MyBook Live, the drives themselves seem to work fine and i have access to them (most of the time) on my home netwok, however i keep getting that little yellow triangle telling me that something is wrong, specifically:
the device manager error code is This device cannot start. (Code 10)
I can not found Imaging Device option , due to which my integrated webcam is not working ... I am Using Dell inspiron 5520 , I have tried millions of things ...
View 13 Replies View RelatedI just reinstalled my PC, obviously with windows 8. And I can't seem to play games, i mostly play COD4 and whenever I join a game, I get an Dirextx error, or my PC just reboots..
I don't know if it has something to do with my LPC INTERFACE controller.
LPC One:
on Intel(R) ICH8/ICH8R Family LPC Interface Controller - 2810
The drivers for this device are not installed. (Code 28)
To find a driver for this device, click Update Driver.
Games one:
directx unrecoverable error
And I used to get 'AMD Driver timed out, and succesfully rebooted" something like that.
This is my setup:
OS: Windows 8
MOBO: FOXXCONN p9657aa-8ks2h
CPU: Intel Core2Quad Q6600
RAM: 2GB ddr2
GPU: Club3D Radeon HD 6970 Coolstream Edition
HDD: dont know really, 300gb
I installed my fresh Windows 8.1 Enterprise 64 bits (build 9600), on my Acer V3-571G laptop.
When I go to device manager, and I want uninstall this driver.
--> Imaging devices
--> and Bluetooth,
When I Disable and Uninstall them, then, it's seems te drivers are gone! But when I restarts mine Laptop, the Imaging devices and bluetooth, comes back?
How I can complete remove that? In the standard Windows 8 (not 8.1) that was possible? But 8.1?
Bluetooth worked once. Now the device does not show in device manager under network adapters. What can I do? Is the adapter broken?
View 3 Replies View RelatedI'm running Windows 8.1 on a SDD with a second HDD along side it. Inside the Device Manager I disabled my second HDD and rebooted my system.
Windows started as normal, but a few key windows programs have stopped working:
- Task Manager
- Device Manager (basically all control panel functions)
- Powershell (Command Prompt Works, but can't be opened with administrative rights)
The main problem is that I now can't enable my second HDD. Why the HDD is needed for these programs and how I can re-enable my HDD?
I've installed Microsoft Windows 8.1 Version 6.3.9600 Build 9600 on my HP 430 Notebook PC with 1 GB RAM and Pentium CPU @ 2GHz 2 Cores.
Display drivers are not working properly (i.e., everything appears bigger and unclear), earlier I'd successfully updated the display drivers and made it work using Device Manager. making a backup of the drivers (may be in .inf format) from the installed drivers so that I don't have to update it every time I re-install it.
I recently bought a used Sapphire HD7970 GHZ Edition 3GB, which I got quite cheaply but it did need a little work doing to it.
Firstly the fan cable had, in the hands of the original user, somehow snapped and they had repaired it to run on a normal motherboard 4 pin fan lead. When I got the card the DIY repair had practically fallen apart but I was able to reconnect it all and both fans do spin (not sure if they are running fast enough but they are spinning and moving a little bit of air).
Anyway, second problem was the card had one of the two BIOSes flashed with an incorrect BIOS (seller said it was a BIOS of a different model of 7970) and needs reflashing.
So I fixed the fan lead, verified at least some cooling was happening and was able to get to Windows (8.1 64 bit) with it. However, in the device manager the card has the yellow exclamation mark and says "Windows has stopped this device because it has reported problems. (Code 43)". I tried installing the AMD drivers regardless but they fail with warnings though still prompt to reboot, I rebooted on the hope they might have still installed but next thing Windows blue screens (well the Windows 8 version of it) with an unhandled exception warning and does this every time until I make it do a system restore then the card operates like it did before in that it outputs a picture but won't take the driver and fails to run anything more than 2D applications.
The seller has confirmed the good BIOS is already selected (he said it won't even boot to Windows on the other one) and recommended some beta drivers but these didn't work. I have also tried using Display Driver Uninstaller to remove all traces of old drivers (and manually deleted all AMD/ATI files and registry references) but no progress.
So why am I getting the code 43? Is there a diagnostic program that can tell me exactly what is stopping the card from working? How I might get this card up and running again?
My audio disappeared and stopped working. my audio icon has a red x on it and when i click it it wants to detect problems (it doesn't work).
what should i do? how should I diagnose the audio? I feel like this is hardware problem as it just happened out of the blue. The audio board has a USB connection (which is working) so the connection from it to the mother board is fine.
Installing and updating the driver did nothing. I can't get the device manager to detect the hardware (scanning does nothing).
I cannot get the scanning component of my new printer to work. The "scanner" appears in device manager but has an error (yellow exclamation), it seems that the installation of the scanner network driver fails every time I try to install it. The printer prints fine just will not scan. I have it wirelessly installed and am using Windows 8.1 currently.
How to get it works as I am totally out of ideas after numerous uninstall and reinstalls.
I'm not truly the best with computers, and this is a new pop up for me. I just purchased this new dell laptop in May and have had no problems with it. However, in the last few weeks I've been getting a new pop up in the right hand corner. My house hold have a wireless router that is password protected. I have McAfee Security Center updated, and shows that all my firewalls and security systems are on and active.
However, this is the message I get and I'm concerned about my networks safety:
"Unknown PC or device detected
This PC or device has connected to your network:
IP Adress xxxxxxx"
I've opened my action center to make sure everything is okay, and the only thing I find that isn't turned on is the "Network Access Protection" - which is something I haven't touched before, nor does it provide a link in which to turn it on.
I have a Dell XPS 15Z, which I bought off a friend. They recently updated to Windows 8 and so now thats what I have. But when i go into my drivers its telling me that i have an unknown driver. no solutions online have answered my questions though some came close. So, this is what i know:
Unknown Device
Device Type: Other devices
Manufacturer: Unknown
Location: on PCI Express Root Complex
Hardware Ids:
ACPIVEN_SMO&DEV_8800
ACPISMO8800
*SMO8800
i don't know if this is related but my laptop also wont charge. I just bought a new AC Adapter to replace the one i had, and it still isn't charging. The light blinks red 4-5 times and blue/green once. ive searched online to see what the problem is but i cannot do some of the fixes as the computer is at 0% battery.
I am trying to install a driver for the Epson perfection 1200U on my grandpa's new windows 8 PC. Problem is that the scanner is too old and epson doesnt provide a driver for this scanner for windows 8. But how to uncheck "show compatible hardware" in device manager when you are trying to update drivers on a specific device.
I get there by right clicking on the device, selecting properties, "browse my computer for driver software," then "let me pick from a list of device drivers on my computer," then after that the window that appears does not have an option to uncheck "show compatible hardware." And so I can't continue
I installed my fresh Windows 8.1 Enterprise 64 bits (build 9600), on my Acer V3-571G laptop.
When I go to device manager, and I want uninstall this driver.
--> Imaging devices
--> and Bluetooth,
When I Disable and Uninstall them, then, it's seems te drivers are gone! But when I restarts mine Laptop, the Imaging devices and bluetooth, comes back?
Why is that? How I can complete remove that? In the standard Windows 8 (not 8.1) that was possible? But 8.1?
I think I know what "Bluetooth" is, and since I didn't think I needed it, I disabled it in Device Manager. Also, uninstalled it in Add & Remove programs. But I just ran the 'reliability monitor' / view reliability history, and saw all the "successful" installations of "Bluetooth". There were "nine" listings. More then I removed.
I have been checking what works and doesn't work to speed up and improve performance of my computer. And the plan is very much working. The computer is working great, with average boot times under 40 seconds, and my Firefox browser is 'flying'. Since I am adding some more memory in a day or two, I'm trying to see what works and do a 'reformat', complete reinstallation of the system. Setting up everything the way I want it. "Right" the first time if you will, and then be done with any testing and just using the computer.
Anyway, obviously, I'm not touching "Bluetooth". But what is it, and why does windows 8.1 think I need it. I don't have any wireless stuff, if that's what its for. And I just assumed that if I ever did need 'wireless', I would just download something.
Dell Inspiron 3647 computer, 3GHz, 4 gig's memory, all windows updates, windows 8.1.
Ive just done a clean installation of Windows 8. I checked device manager straight away. There was a listing under Other Devices with an exclamation mark listed only as "Media". Ive never seen that before so I havent a clue what it referred to. When I clicked on its properties it said Internal High Definition Audi Bus. Was this a serious issue..maybe a corrupted installation?
I wasn't sure what to do but because I had installed from Windows CD and not factory image I had to go to the Dell site and then install the Intel Chipset software. I then rebooted. The Media icon and exclamation error then disappeared from Device Manager.
Was it the Reboot of my PC that got rid of it or was it the Intel Chipset software being installed that sorted it out? Also what is "Media" referring to or is it just a generic term? Also, Im always confused as to what is the difference between an exclamation mark and the blue question mark on a white background in Device Manager which Ive seen before too?
When I click on Device Manager from the Control panel it freezes.
View 3 Replies View RelatedWhat is happening on the pc ? Btw it webcam is not functioning from yesterday. It asked me to connect to a camera.
View 2 Replies View RelatedI tried everything I know but can't seem to get back my wifi card to work.
View 9 Replies View RelatedMy Windows 8.1 box keeps crashing in device manager upon any "refresh." For example, scanning for hardware changes, installing/uninstalling something, or updating anything. I've gone through and updated any drivers that I saw were old, but no joy. Uploading the SF Diag output as well.
View 9 Replies View RelatedI can open device manager, but whenever I try any function, search for new hardware, update drivers, disable device, etc, device manager crashes with the error "Microsoft Management Console Has Stopped Working." Other Management console programs work fine (event viewer, performance monitor).
I've run sfc /scannow half a dozen times. I've run it from a clean boot, I've run it 3 times in a row, I've run it, restarted, and then run it again. No errors found.
Faulting application name: mmc.exe, version: 6.3.9600.16384, time stamp: 0x5215ef8f
Faulting module name: devmgr.dll, version: 6.3.9600.16384, time stamp: 0x5215ebc8
Exception code: 0xc00000fd
Fault offset: 0x000000000000e3a2
Faulting process id: 0x1a8c
[Code] ......
I'm running a custom build PC on which I clean installed a (legal) copy of Windows 8.1
My system works fine except it can not install drivers for ANYTHING non-standard. Keyboard, mouse, memory sticks, HDDs all work fine, however when I plug in my phone/tablet/camera etc via USB, it fails to install drivers and I can't use my device.
Here's what device manager looks like with my (android) phone plugged in
And when I select Update driver software, I get this error:
I am unsure whether I should enable "Automatically get device drivers, apps, and info for new devices" when installing Windows 8 Pro?
What exactly will it do?
If I enable this, will Windows then automatically install software packages/drivers from the manufacturer, like for example the Logitech Setpoint software for their keyboards and mouse and similar software for other devices? I don't want or need that. Or will it behave like in Windows 7?
On my other PC with Windows 7 I see in Windows Update that there are a couple of optional updates, including that Logitech stuff, as well as some driver for a BenQ monitor I have and also nvidia video drivers. This kind of stuff I don't want or need installed automatically as important updates in Windows Update - so I am worried if enabling this automatic driver stuff in Windows 8 is different than Windows 7? Meaning that it will get installed secretly/automatically?
However, it's fine that Windows finds them so I can manually go and check if I want to install any of it.
The key is that the updates are optional in Windows 7, but I have seen a few people complain about Windows 8 installing stuff like video drivers and mouse drivers automatically.
What this below message means on connecting usb3.0 custom device ?
Host controller used in Fresco Logic USB3.0 host controller
This below message is seen on Device Manager window.
" This device cannot start. (Code 10)
{Device Timeout}
The specified I/O operation on %hs was not completed before the time-out period expired."
I have a sony vaio pro laptop, originally running windows 8 but just updated to windows 8.1. However, this problem was the same when I had windows 8 so updating to 8.1 has not changed anything. I cannot add my xbox 360 wirelessly as a device to my vaio laptop. I want to be able to stream videos etc from laptop to xbox. When I go to Change PC settings>Devices>Add device the computer searches but will not find the xbox, despite it being switched on and connected to the wireless network.
The really frustrating thing is that I have another laptop running windows 8, now updated to 8.1, and it connects with the xbox with no problems whatsoever. As soon as I click 'add a device' on this laptop the xbox is found and I can connect to it/stream content with no problems.
I have tried disabling the firewall on my vaio laptop, still didn't work. I have ensured sharing etc is turned on on both the laptop and the xbox.
I am wanting to transfer videotapes from a digital camcorder to my new laptop that runs windows 8. Any video capture devices that are compatible with windows 8.
View 1 Replies View RelatedSometimes this message window appear and disappear as attached.
My motherboard is p6x58d premium and I installed every possible drivers. However this window is still coming.