I am wanting to transfer videotapes from a digital camcorder to my new laptop that runs windows 8. Any video capture devices that are compatible with windows 8.
View 1 Replieswhen look in the device manager i get this:
[URL]
and PCI Device above this to unknown device ( i took this photo from google)
when i try to delete it back after restart or Scan hardware change
lenovo ThinkPad Edge E540 20C6006JIV win 8.1
Last part of the message, (Device Descriptor Request Failed). I get this, in Device Manager, and I have searched for an answer on the net. Also it is a Code 43. I went through my laptop, with an HP Technician this morning, I might add at a cost of 5p/minute, for 30 odd minutes. He has said that because I had gone over to Windows 8.1 and the recovery discs I made will not load, to put back in Windows 8. I have to send the laptop back for re-installing the OS, because Windows 8.1 do not have the update for my problem. Also the R.H. USB socket has a failure ID:0GAPTK-6T7716-MFPWWK-8D1Q03. I personally think that this is all what the problem is. a duff USB. Is this a cop-out???
Does Windows 8.1 having driver WHQL problems?
I only found out the problem with the usb when I tried to download a Mobi file to a Kindle for my wife. The other usb's work OK.
I'm running a custom build PC on which I clean installed a (legal) copy of Windows 8.1
My system works fine except it can not install drivers for ANYTHING non-standard. Keyboard, mouse, memory sticks, HDDs all work fine, however when I plug in my phone/tablet/camera etc via USB, it fails to install drivers and I can't use my device.
Here's what device manager looks like with my (android) phone plugged in
And when I select Update driver software, I get this error:
I am unsure whether I should enable "Automatically get device drivers, apps, and info for new devices" when installing Windows 8 Pro?
What exactly will it do?
If I enable this, will Windows then automatically install software packages/drivers from the manufacturer, like for example the Logitech Setpoint software for their keyboards and mouse and similar software for other devices? I don't want or need that. Or will it behave like in Windows 7?
On my other PC with Windows 7 I see in Windows Update that there are a couple of optional updates, including that Logitech stuff, as well as some driver for a BenQ monitor I have and also nvidia video drivers. This kind of stuff I don't want or need installed automatically as important updates in Windows Update - so I am worried if enabling this automatic driver stuff in Windows 8 is different than Windows 7? Meaning that it will get installed secretly/automatically?
However, it's fine that Windows finds them so I can manually go and check if I want to install any of it.
The key is that the updates are optional in Windows 7, but I have seen a few people complain about Windows 8 installing stuff like video drivers and mouse drivers automatically.
I've installed Microsoft Windows 8.1 Version 6.3.9600 Build 9600 on my HP 430 Notebook PC with 1 GB RAM and Pentium CPU @ 2GHz 2 Cores.
Display drivers are not working properly (i.e., everything appears bigger and unclear), earlier I'd successfully updated the display drivers and made it work using Device Manager. making a backup of the drivers (may be in .inf format) from the installed drivers so that I don't have to update it every time I re-install it.
I use the snipping tool to get a screenshot and save it to my desktop but it never appears on my desktop? I do another snip and save it to my desktop and it says "capture already exists" - but its not on my desktop?
I can view it in my menu under "recent items" but the home of the file is shown in the photo. Why is it not on my desktop as the file sting says it is?
I get the following error: "An Error occurred in capturing pin; Try again later". How to Create, Change, or Remove a PIN:
As per this tutorial, my credential manager service is also automatic and running. Still, I am unable to generate Pin or picture Password.
Is it possible to use 32 bit XP drivers on Windows 8.1 X64. These XP drivers are the only ones available for my USB video device which works on the 32 bit Windows 8.1 but they seem to be rejected on the x64 version.
View 9 Replies View RelatedUsing Express Studio screen record? every time I try and capture FULL screen it crashes on me!
View 1 Replies View RelatedFirst my computer when bought came pre installed with Windows 7. As soon as Windows 8 came out I upgraded to Windows 8. My system is BIOS not UEFI. I have about 3gb ram and 500gb hdd drive 2.20 ghz processor. Windows 8 runs really smoothly. So recently 2-3 days ago I decided to dual boot Ubuntu with Windows 8. Before when I had Windows 7 I dual booted it with Windows 8. So now I thought about dual booting with Ubuntu 12.04 LTS. The Installation process was fine until I take out the installation usb with Ubuntu and whenever I try to restart it the PC would hang on the oem screen for a while which is ridiculously long.
Then when I would boot into Windows 8 and sign in I would get a notification message saying the last storage device you plugged in isn't found. I went to the device manager in Windows and it would say an unknown device has been found and even if I tried to Uninstall it would come back again. I tried searching for updates but nothing came up. I googled it and got no results. What annoys me the most is the PC hanging on the oem screen. Right now I fresh installed Windows 8 so it's the only OS running at the moment. But I want Ubuntu 12.04 LTS because of git, ssh and all the server side stuff. I have also posted the error screenshot for more info.
What this below message means on connecting usb3.0 custom device ?
Host controller used in Fresco Logic USB3.0 host controller
This below message is seen on Device Manager window.
" This device cannot start. (Code 10)
{Device Timeout}
The specified I/O operation on %hs was not completed before the time-out period expired."
I have a sony vaio pro laptop, originally running windows 8 but just updated to windows 8.1. However, this problem was the same when I had windows 8 so updating to 8.1 has not changed anything. I cannot add my xbox 360 wirelessly as a device to my vaio laptop. I want to be able to stream videos etc from laptop to xbox. When I go to Change PC settings>Devices>Add device the computer searches but will not find the xbox, despite it being switched on and connected to the wireless network.
The really frustrating thing is that I have another laptop running windows 8, now updated to 8.1, and it connects with the xbox with no problems whatsoever. As soon as I click 'add a device' on this laptop the xbox is found and I can connect to it/stream content with no problems.
I have tried disabling the firewall on my vaio laptop, still didn't work. I have ensured sharing etc is turned on on both the laptop and the xbox.
I installed my fresh Windows 8.1 Enterprise 64 bits (build 9600), on my Acer V3-571G laptop.
When I go to device manager, and I want uninstall this driver.
--> Imaging devices
--> and Bluetooth,
When I Disable and Uninstall them, then, it's seems te drivers are gone! But when I restarts mine Laptop, the Imaging devices and bluetooth, comes back?
How I can complete remove that? In the standard Windows 8 (not 8.1) that was possible? But 8.1?
Bluetooth worked once. Now the device does not show in device manager under network adapters. What can I do? Is the adapter broken?
View 3 Replies View RelatedNo audio or video from Hopper Sling Box to Dell XPS 8.1 Works on my Windows 7. I can change the channel, create a recording event but I cannot view or hear. Registers strong bitrate but no picture/sound. Dish cannot resolve. Thought the 64 bit was the problem but they say that has been resolved.
View 2 Replies View RelatedI am having a serious problem with minecraft. No matter what version of minecraft I use or what graphics driver I use I always get this error on win 8.1. Not on 7, only 8. : Bad video card drivers!
Minecraft was unable to start because it failed to find an accelerated OpenGL mode. This can usually be fixed by updating the video card drivers.
--- BEGIN ERROR REPORT 7fe0271 --------
Generated 7/6/14 10:26 AM
- Minecraft Version: 1.3.2
- Operating System: Windows 8.1 (amd64) version 6.3
- Java Version: 1.7.0_60, Oracle Corporation
[Code] .....
Win 8.1
i5
8gb ram
Intel HD 4000
Just a desktop without a video card.
In order to play World of Warplanes, they recommended a rollback to a previous version of the driver. I unistalled the video driver, downloaded the old one and restarted the computer.
Now the monitor (or monitors, as I tried with an Acer and a Samsung one) both pop up a "Input not supported" right after the Windows Logo even if a try to boot in Safe Mode (so, no, I can't enter Advanced Recovery Mode). The same after I try to boot from a USB.
The same error I got when I installed Windows 8.1, a month ago, but after the "Input not supported" remained for 15 minutes or so it restarted a couple of times, and after 40 de minutes the installation begun. Now I'm waiting for 2 hours and nothing.
When I plug in my iPhone, iPad or iPod into my Windows 8.1 Pro PC it launches Windows File Explorer instead of iTunes. There's no option in Autoplay for iTunes.
If I launch iTunes manually the iPhone, iPad or iPod can be seen and used in iTunes.
How do I get iTunes to show as an option in Autoplay
Where to get the relavent OpenGl Drivers from for windows 8 ? Apps designed for Windows 8 are fine , anything which did play on Windows 7 (minecraft for example) just gets the same error message, "Bad videocard drivers! failed to find an accelerated OpenGL mode ".
View 8 Replies View RelatedSometimes this message window appear and disappear as attached.
My motherboard is p6x58d premium and I installed every possible drivers. However this window is still coming.
I recently bought a cheap USB Hub off eBay. I plugged it in and connected my devices and it always works.
However, about 75% of the time when Win 8 boots, I get about a dozen "USB connect/disconnect" sounds and a window that says "USB Device not recognized". (sometimes 3 or 4 of these windows)
I've searched for this issue but every post that I find provides a recommendation for a USB device that is not working. None of these suggestions applies because after all the boot noise, the hub and it's devices work. It just seems like Win 8 is having trouble recognizing the Hub but keeps trying and eventually succeeds.
The Hub is plugged into a USB 2 port with a scroll wheel mouse and a Dymo LabelWriter 400 connected to the hub.
Win 8.1 Pro X64
Asus CM3870
Intel Core i7-3770
16GB RAM
No USB device seems to be getting detected on my machine when I plug in a flash drive or an external hdd I get the distinctive sound from my speakers that an USB device is plugged in but nothing is showing up in "My Computer". I went through the event logs and found that Windows is failing to load the USB device (check image in attachment logs.jpeg). Recently I installed iTunes, so I though it might be causing this problem but I uninstalled it even then the problem persists. I don't want to format my machine just because of this small problem. Is this a driver conflict ? How do I find out why windows is all of a sudden failing to load the USB devices ? I have uploaded a copy of the saved logs detailing this failure(logs.zip).
View 6 Replies View RelatedI have just bought a diskless XPS1645 and have clean-installed Win8.1. All is well, apart from...
1. Device Manager shows two Base System Devices that remain 'undriven' - what the items may be and what drivers are required?
2. The volume and DVD eject buttons don't. (The Wireless button definitely does.)
I have a Seagate GoFlex 1 Tb USB 3.0 drive. All worked good until a week or two ago. Now the drive will not be recognized when plugged into a USB 3.0 port, the error given is "Unknown USB Device (Device Failed Enumeration).
If I plug the GoFlex drive into a a USB 2.0 port, it works. I can plug USB 2.0 devices into the USB 3.0 port and they work. I just can't plug my USB 3.0 drive into a USB 3.0 port and get it to work.
I have tried uninstalling the Unknown USB Device in Device Manager. I've also uninstalled all other instances of it failing to be recognized.
My motherboard has a VIA VL805 USB controller. I've used the drivers on Gigabyte's site and I've used VIA's drivers, no difference. I have the latest BIOS for my motherboard.
The drive does not show up in Disk Management when plugged into a USB 3.0 port. This shouldn't be a surprise since the device is unknown in the Device Manager.
I thought the problem might be with the USB 3.0 cable or the GoFlex drive's USB interface. So I bought a new USB 3.0 docking station and...same problem. The new docking station also fails enumeration. Basically what it boils down to is a USB 3.0 storage device will not be recognized in a USB 3.0 port. But they work when plugged into a USB 2.0 port.
I have a strange problem: connecting a Canon Powershot G10 digital camera via USB 2.0 to my Win 8.1 laptop presents no problem (info pops up).
But: Using the same cable connected to my desktop PC, there is no reaction whatsoever. No device manager listing, no error message. The USB ports are all working perfectly with other devices (sticks, external hard drive, wireless mouse & keyboard). Moreover, until some weeks ago, the Canon camera was recognized normally.
Short of re-installing the whole USB controller
When I connect my DualShock 3 controller to my Windows 8.1 laptop it does not charge. I hear a beep, as in something was connected to the PC, then it seems to charge for a couple of seconds (lights flash on the controller) and then it stops. I am able to charge my phone and tablet so, it's just the DS3. It works fine on my Windows 7 computer, so it's not the controller.
View 5 Replies View RelatedBluetooth device is not working
View 3 Replies View RelatedI want to change OWN Bluetooth device name. I am using windows 8 which comes with my new laptop Dell Inspiron 15z. The company has set my default bluetooth name as "User". However I want it to be changed but how.
I have tried going to Device manager, Devices and printers etc.
i Am trying to build my first PC with a Asus P8Z68M motherboard I have managed to get it all going but when I start it up its says - Using PCIE Gen 2 - cant find any device. What does this mean? Also, why does the PC beep at me whilst booting up?
View 9 Replies View RelatedSo i purchased a Bluetooth portable speaker from a china it was very cheap and works great the website i got from is *REMOVED* and the model is the bv200 the only issue is that it has some annoying greetings and they are in chinese.
I want to know how can I access this device and delete or replace this greeting, it has a micro usb connection but when i plug it in to my computer it dosent show up in the device list.