So i purchased a Bluetooth portable speaker from a china it was very cheap and works great the website i got from is *REMOVED* and the model is the bv200 the only issue is that it has some annoying greetings and they are in chinese.
I want to know how can I access this device and delete or replace this greeting, it has a micro usb connection but when i plug it in to my computer it dosent show up in the device list.
Last part of the message, (Device Descriptor Request Failed). I get this, in Device Manager, and I have searched for an answer on the net. Also it is a Code 43. I went through my laptop, with an HP Technician this morning, I might add at a cost of 5p/minute, for 30 odd minutes. He has said that because I had gone over to Windows 8.1 and the recovery discs I made will not load, to put back in Windows 8. I have to send the laptop back for re-installing the OS, because Windows 8.1 do not have the update for my problem. Also the R.H. USB socket has a failure ID:0GAPTK-6T7716-MFPWWK-8D1Q03. I personally think that this is all what the problem is. a duff USB. Is this a cop-out???
Does Windows 8.1 having driver WHQL problems?
I only found out the problem with the usb when I tried to download a Mobi file to a Kindle for my wife. The other usb's work OK.
when look in the device manager i get this:
[URL]
and PCI Device above this to unknown device ( i took this photo from google)
when i try to delete it back after restart or Scan hardware change
lenovo ThinkPad Edge E540 20C6006JIV win 8.1
I am unsure whether I should enable "Automatically get device drivers, apps, and info for new devices" when installing Windows 8 Pro?
What exactly will it do?
If I enable this, will Windows then automatically install software packages/drivers from the manufacturer, like for example the Logitech Setpoint software for their keyboards and mouse and similar software for other devices? I don't want or need that. Or will it behave like in Windows 7?
On my other PC with Windows 7 I see in Windows Update that there are a couple of optional updates, including that Logitech stuff, as well as some driver for a BenQ monitor I have and also nvidia video drivers. This kind of stuff I don't want or need installed automatically as important updates in Windows Update - so I am worried if enabling this automatic driver stuff in Windows 8 is different than Windows 7? Meaning that it will get installed secretly/automatically?
However, it's fine that Windows finds them so I can manually go and check if I want to install any of it.
The key is that the updates are optional in Windows 7, but I have seen a few people complain about Windows 8 installing stuff like video drivers and mouse drivers automatically.
I've installed Microsoft Windows 8.1 Version 6.3.9600 Build 9600 on my HP 430 Notebook PC with 1 GB RAM and Pentium CPU @ 2GHz 2 Cores.
Display drivers are not working properly (i.e., everything appears bigger and unclear), earlier I'd successfully updated the display drivers and made it work using Device Manager. making a backup of the drivers (may be in .inf format) from the installed drivers so that I don't have to update it every time I re-install it.
I'm running a custom build PC on which I clean installed a (legal) copy of Windows 8.1
My system works fine except it can not install drivers for ANYTHING non-standard. Keyboard, mouse, memory sticks, HDDs all work fine, however when I plug in my phone/tablet/camera etc via USB, it fails to install drivers and I can't use my device.
Here's what device manager looks like with my (android) phone plugged in
And when I select Update driver software, I get this error:
Sometimes this message window appear and disappear as attached.
My motherboard is p6x58d premium and I installed every possible drivers. However this window is still coming.
I recently bought a cheap USB Hub off eBay. I plugged it in and connected my devices and it always works.
However, about 75% of the time when Win 8 boots, I get about a dozen "USB connect/disconnect" sounds and a window that says "USB Device not recognized". (sometimes 3 or 4 of these windows)
I've searched for this issue but every post that I find provides a recommendation for a USB device that is not working. None of these suggestions applies because after all the boot noise, the hub and it's devices work. It just seems like Win 8 is having trouble recognizing the Hub but keeps trying and eventually succeeds.
The Hub is plugged into a USB 2 port with a scroll wheel mouse and a Dymo LabelWriter 400 connected to the hub.
Win 8.1 Pro X64
Asus CM3870
Intel Core i7-3770
16GB RAM
No USB device seems to be getting detected on my machine when I plug in a flash drive or an external hdd I get the distinctive sound from my speakers that an USB device is plugged in but nothing is showing up in "My Computer". I went through the event logs and found that Windows is failing to load the USB device (check image in attachment logs.jpeg). Recently I installed iTunes, so I though it might be causing this problem but I uninstalled it even then the problem persists. I don't want to format my machine just because of this small problem. Is this a driver conflict ? How do I find out why windows is all of a sudden failing to load the USB devices ? I have uploaded a copy of the saved logs detailing this failure(logs.zip).
View 6 Replies View RelatedI have a Seagate GoFlex 1 Tb USB 3.0 drive. All worked good until a week or two ago. Now the drive will not be recognized when plugged into a USB 3.0 port, the error given is "Unknown USB Device (Device Failed Enumeration).
If I plug the GoFlex drive into a a USB 2.0 port, it works. I can plug USB 2.0 devices into the USB 3.0 port and they work. I just can't plug my USB 3.0 drive into a USB 3.0 port and get it to work.
I have tried uninstalling the Unknown USB Device in Device Manager. I've also uninstalled all other instances of it failing to be recognized.
My motherboard has a VIA VL805 USB controller. I've used the drivers on Gigabyte's site and I've used VIA's drivers, no difference. I have the latest BIOS for my motherboard.
The drive does not show up in Disk Management when plugged into a USB 3.0 port. This shouldn't be a surprise since the device is unknown in the Device Manager.
I thought the problem might be with the USB 3.0 cable or the GoFlex drive's USB interface. So I bought a new USB 3.0 docking station and...same problem. The new docking station also fails enumeration. Basically what it boils down to is a USB 3.0 storage device will not be recognized in a USB 3.0 port. But they work when plugged into a USB 2.0 port.
I have a strange problem: connecting a Canon Powershot G10 digital camera via USB 2.0 to my Win 8.1 laptop presents no problem (info pops up).
But: Using the same cable connected to my desktop PC, there is no reaction whatsoever. No device manager listing, no error message. The USB ports are all working perfectly with other devices (sticks, external hard drive, wireless mouse & keyboard). Moreover, until some weeks ago, the Canon camera was recognized normally.
Short of re-installing the whole USB controller
When I connect my DualShock 3 controller to my Windows 8.1 laptop it does not charge. I hear a beep, as in something was connected to the PC, then it seems to charge for a couple of seconds (lights flash on the controller) and then it stops. I am able to charge my phone and tablet so, it's just the DS3. It works fine on my Windows 7 computer, so it's not the controller.
View 5 Replies View RelatedBluetooth device is not working
View 3 Replies View RelatedI want to change OWN Bluetooth device name. I am using windows 8 which comes with my new laptop Dell Inspiron 15z. The company has set my default bluetooth name as "User". However I want it to be changed but how.
I have tried going to Device manager, Devices and printers etc.
i Am trying to build my first PC with a Asus P8Z68M motherboard I have managed to get it all going but when I start it up its says - Using PCIE Gen 2 - cant find any device. What does this mean? Also, why does the PC beep at me whilst booting up?
View 9 Replies View RelatedA couple days ago, somehow, I turned on 'scanning your device' and now I get a black screen every time I plug my phone into the USB port to charge it. how to disable this 'feature'. It's really annoying because the connection is a bit worn, and it keeps connecting and disconnecting...connecting and disconnecting...connecting and disconnecting...connecting and disconnecting...connecting and disconnecting...connecting and disconnecting...connecting and disconnecting...connecting and disconnecting...connecting and disconnecting...
I don't want anything to happen when I plug the phone into the USB port.
I'm running Windows 8.1 on a SDD with a second HDD along side it. Inside the Device Manager I disabled my second HDD and rebooted my system.
Windows started as normal, but a few key windows programs have stopped working:
- Task Manager
- Device Manager (basically all control panel functions)
- Powershell (Command Prompt Works, but can't be opened with administrative rights)
The main problem is that I now can't enable my second HDD. Why the HDD is needed for these programs and how I can re-enable my HDD?
Recently my "PS to PC Converter" USB device, as shown in image was not recognized by my laptop. It was working fine as of yesterday, where I was playing FIFA with my friend. Then today when I plug it in, it says USB device not recognized even though I can still on the analog but the controller is not detected by the game. Other games that I use to play with controllers are also not detecting the device. I kept reinstalling the driver but still the same message. Restarting computer, turning it off for a few minutes did not solve my problem too. I'm pretty sure my USB ports are fine as my mouse, keyboard and hard drives are working in all of the USB ports.
EDIT: I check the Device Manager and found a yellow exclamation mark on Other Devices named "Unknown device", I check the properties and says Code 43 on the status. I Enable/Disable it, still the same message.
I made a bit of an error, I bought a new joystick to play MS flight Sim X and installed it etc .
I went to uninstall the old driver before installing the new one, and made the error. I really don't know why I did it but I went into view devices, right clicked on the icon for the Joystick and removed it
Is there any way to get it back, I have tried to reinstall the driver but it still does not show on the devices panel and i cannot use it ..
I got a speed camera detector thing for Xmas. I've downloaded the software for the device and when I plug the device in, the software doesn't detect it. The manufacturer sent me an email with a link to download and install the driver. The driver installed, but it still doesn't work. When I looked at the driver status in device manager, it says...
This device cannot start. (Code 10)
{Not Enough Quota} Not enough virtual memory or paging file quota is available to complete the specified operation.
I'm on a windows 8 HP Pavillion 15.
I use a Sandisk Cruzer Extreme USB 3.0 32gb flash drive. When I plug the flash drive in, autoplay does not come up however the flash drive shows up on My Computer, but not Device Manager. It does not show up on the tray (the "Safely Remove Hardware" icon), but other USB flash drives do. The drive is fully working and I can transfer files to and from the drive, I just cannot autoplay nor eject the drive safely.
I've done the obvious such as ensuring autoplay is enabled, formatting the drive, trying different ports, and now I'm not sure what the problem can be.
I've observed that it's only the first USB port on the front panel that has this problem, but all other USB drives autoplay fine on this port. (I think only usb 2.0 - 3.0 devices do not autplay)
So, it used to be okay on Windows 7, but now the iPhone icon is not showing up in Windows Explorer or in "Devices and Printers".
[URL] ..... Picture of my computer with no iPhone image.
[URL] ..... Devices and Printers (See the Kodak icon? That's how I want my iPhone 4S' icon to be)
OS is Windows 8.1 Pro with all the latest updates.
I have got a problem with bluetooth device. I tried removing my bluetooth device but it failed to remove. It is displayed as "removing device" on the screen as shown in the picture. Now I cannot add the device again. I don't find the device when I search by clicking on "add a device" as shown in the picture. When I try to add from my mobile device it fails to add by showing a message as shown in the next picture.
View 4 Replies View RelatedFirst my computer when bought came pre installed with Windows 7. As soon as Windows 8 came out I upgraded to Windows 8. My system is BIOS not UEFI. I have about 3gb ram and 500gb hdd drive 2.20 ghz processor. Windows 8 runs really smoothly. So recently 2-3 days ago I decided to dual boot Ubuntu with Windows 8. Before when I had Windows 7 I dual booted it with Windows 8. So now I thought about dual booting with Ubuntu 12.04 LTS. The Installation process was fine until I take out the installation usb with Ubuntu and whenever I try to restart it the PC would hang on the oem screen for a while which is ridiculously long.
Then when I would boot into Windows 8 and sign in I would get a notification message saying the last storage device you plugged in isn't found. I went to the device manager in Windows and it would say an unknown device has been found and even if I tried to Uninstall it would come back again. I tried searching for updates but nothing came up. I googled it and got no results. What annoys me the most is the PC hanging on the oem screen. Right now I fresh installed Windows 8 so it's the only OS running at the moment. But I want Ubuntu 12.04 LTS because of git, ssh and all the server side stuff. I have also posted the error screenshot for more info.
My Hp Pavilion g6 laptop bluetooth can't detect any device when i put it on,it is pre-installed.
View 1 Replies View RelatedSince a few years i'm the happy owner of an Asrock ION 330 HT PC. I use it for that purpose, Home Theatre PC. When i bought it, it came with Windows 7 installed, and a working IR remote control (Media Center green button type of remote).
I updated Windows 7 to Windows 8, with everything working fine. However, since the update to Windows 8.1, my IR Remote stopped working. Device-manager now describes it as an 'unknown device'. When I have device manager search for updated drivers it says :
'A driver was found for this device, but an error occured during installation.
Nuvoton W836x7HG CIR Device Driver
This action requires an interactive Windows-computer.'
Microsoft support redirects me to Asrock support for updated drivers.
My employer is starting to look at Windows 8 for our tablet PCs. Currently we only have 1 model, its the Dell Latitude ST and are using Windows 7 on them. I am trying to create and customize an automated install of Windows 8 for our Latitude ST's.
I've used MDT to capture a Windows 8 Enterprise 32bit image and can image Latitude tablet from thumb drive just fine. In image I copied (not installed) driver files to my WIM file. My unattend.xml file works fine, am not getting any prompts once booting into image on my Latitude ST's.
The problem I am having is Windows Setup is not installing any Latitude device drivers. I copied the device drivers to C:WindowsINFLatitudeST folder and in it is a folder for each device (i.e. Network folder contains all driver files for NIC). I see in the registry that the device path is set to %systemroot%INF so I think I have correct location for parking the driver files. I'm assuming that Windows 8 will search all files/folders in C:WindowsINF for correct INF file. I even tried copying the actual network driver files to C:WindowsINF thinking the system should see it and then install drivers (incase it didn't search for sub folders). To make sure I have Windows 8 supported drives, I downloaded latest driver and still don't work. Everything I try I just cannot get device drivers to install during setup.
Once I am in OS, I can go to device manager, see devices that are unknown, then manually install drivers pointing to the C:WindowsINFLatitudeST folder. Manually works, automated don't.
On Windows 7 Pro 32bit OS, I don't have a problem. The Windows Setup will search C:WindowsINF and find all the correct device drivers for the Latitude ST tablet and install them during setup.
Why cannot I get drivers to install during setup?
What this below message means on connecting usb3.0 custom device ?
Host controller used in Fresco Logic USB3.0 host controller
This below message is seen on Device Manager window.
" This device cannot start. (Code 10)
{Device Timeout}
The specified I/O operation on %hs was not completed before the time-out period expired."
I have a sony vaio pro laptop, originally running windows 8 but just updated to windows 8.1. However, this problem was the same when I had windows 8 so updating to 8.1 has not changed anything. I cannot add my xbox 360 wirelessly as a device to my vaio laptop. I want to be able to stream videos etc from laptop to xbox. When I go to Change PC settings>Devices>Add device the computer searches but will not find the xbox, despite it being switched on and connected to the wireless network.
The really frustrating thing is that I have another laptop running windows 8, now updated to 8.1, and it connects with the xbox with no problems whatsoever. As soon as I click 'add a device' on this laptop the xbox is found and I can connect to it/stream content with no problems.
I have tried disabling the firewall on my vaio laptop, still didn't work. I have ensured sharing etc is turned on on both the laptop and the xbox.
while going through my device manager, a yellow triangle sign caught my attention. It is under the "Sound, video and game controllers' labeled as 'Bluetooth Audio Device". When opening the properties, it says that "This device annot start. (Code 10) Object Path Component was not a directory object.
I went to the MSI website (The laptop is a 4 days old MSI GS70-229) and could not find the corresponding driver for this so called "Bluetooth Audio Device". Windows update was unable to find anything, and the "Roll Back Driver" button was disabled. Driver provider is Qualcomm Atheros Communication.
I would like to delete obsolete drivers from the "update device driver" screen in the device manager. More specifically form the "I want to choose from a list of device drivers on my computer" screen. How to do this?
Attached a printscreen :