Hardware Drivers :: How To Get Back Removed Device
May 30, 2014
I made a bit of an error, I bought a new joystick to play MS flight Sim X and installed it etc .
I went to uninstall the old driver before installing the new one, and made the error. I really don't know why I did it but I went into view devices, right clicked on the icon for the Joystick and removed it
Is there any way to get it back, I have tried to reinstall the driver but it still does not show on the devices panel and i cannot use it ..
View 2 Replies
ADVERTISEMENT
Sep 8, 2013
I have been experiencing problems trying to back up to external hard drive this week and keep getting an I/O Error with various error messages including 0x8007045D My Hard Drive is "G" and I can see it through my computer no problem and I also have my ITunes library on it and the ITunes music is working fine.
I am getting a message in Action Centre saying my Back Up did not complete successfully and then I have the option of Try to Run Again or change back up settings. If I select Try to Run again windows cannot find the disk or network location and if I change settings "G" does not appear. It seems Back Up has detected an error on my "G" which is preventing it from running the back up.
Also in Disk Management I am prompted to initialise a disc before logical disc manager can access it so I select MBR and I get I/O device error and disk 1/G is unknown/not initialised.I have tried powering the external drive off/on and also disconnecting it from the computer but no difference and at present I cannot save anything to the external hard drive. There is a previous back up already on the hard drive but this is not accessible at present.clearing this error so I can back up again without loosing what is stored on the hard drive in particular my ITunes library.
View 9 Replies
View Related
Feb 8, 2014
Last part of the message, (Device Descriptor Request Failed). I get this, in Device Manager, and I have searched for an answer on the net. Also it is a Code 43. I went through my laptop, with an HP Technician this morning, I might add at a cost of 5p/minute, for 30 odd minutes. He has said that because I had gone over to Windows 8.1 and the recovery discs I made will not load, to put back in Windows 8. I have to send the laptop back for re-installing the OS, because Windows 8.1 do not have the update for my problem. Also the R.H. USB socket has a failure ID:0GAPTK-6T7716-MFPWWK-8D1Q03. I personally think that this is all what the problem is. a duff USB. Is this a cop-out???
Does Windows 8.1 having driver WHQL problems?
I only found out the problem with the usb when I tried to download a Mobi file to a Kindle for my wife. The other usb's work OK.
View 9 Replies
View Related
Apr 17, 2014
when look in the device manager i get this:
[URL]
and PCI Device above this to unknown device ( i took this photo from google)
when i try to delete it back after restart or Scan hardware change
lenovo ThinkPad Edge E540 20C6006JIV win 8.1
View 9 Replies
View Related
May 27, 2014
I think I know what "Bluetooth" is, and since I didn't think I needed it, I disabled it in Device Manager. Also, uninstalled it in Add & Remove programs. But I just ran the 'reliability monitor' / view reliability history, and saw all the "successful" installations of "Bluetooth". There were "nine" listings. More then I removed.
I have been checking what works and doesn't work to speed up and improve performance of my computer. And the plan is very much working. The computer is working great, with average boot times under 40 seconds, and my Firefox browser is 'flying'. Since I am adding some more memory in a day or two, I'm trying to see what works and do a 'reformat', complete reinstallation of the system. Setting up everything the way I want it. "Right" the first time if you will, and then be done with any testing and just using the computer.
Anyway, obviously, I'm not touching "Bluetooth". But what is it, and why does windows 8.1 think I need it. I don't have any wireless stuff, if that's what its for. And I just assumed that if I ever did need 'wireless', I would just download something.
Dell Inspiron 3647 computer, 3GHz, 4 gig's memory, all windows updates, windows 8.1.
View 8 Replies
View Related
Jan 8, 2013
I have installed windows 8 in my dell laptop, then I installed the drivers after the extraction. then I found that a folder of name dell is created ,inside that folder a new folder 'driver' is created when I found that all drivers extracted folder which were just been nstalled successfully. now my question is ..can I remove those folder cause they have been already installed?
View 5 Replies
View Related
Jul 26, 2014
I used four drives in my hard-disk. I needed to extend volume for my C drive. So using the Disk management utility I was trying to shrink the drive F (as it was very next to C, as in Disk management). But something happen accidental here. I found that two of my drives E & F went missing after the operation. Also my laptop suddenly restarted (after perform a checking task). I am not sure how this happened and looking for a way to recover the lost partitions as they are seen still exist, including the data.
I was only trying to shrink around 283 mb of volume from a drive with 138 gb, as an experiment basis, to see it work. On that process the drives were lost and those are not shown into my windows now. Using a software EaseUS Partition Master, I could still see the drives still exist as they contain the data as used spaces, and also show the unallocated space of 283 mb but I am not finding a way how could I recover my partition without affecting the data.
View 3 Replies
View Related
Jul 14, 2014
I have two wifi adapters i have been trying to get to work consistently with no luck for several days now. One had been working fine for a few weeks, then it stopped, i tried switching, and that one worked for half a day, then it stopped. Once it stops working the connection is 'limited' but works fine on other machines, or it says it is connected in settings but Chrome says it isn't online. So i wanted to try to install a different driver, having read that this can often be the solution.
But in both cases, there is no old driver to roll back to, and when i try to tell Windows to load a driver i've downloaded or have on a disc, it says, no, the one it already has is 'up to date', and it won't do it. Is there some way to dig around in the system to get rid of the driver it claims is better so i can try another one?
View 9 Replies
View Related
Jan 17, 2014
I am unsure whether I should enable "Automatically get device drivers, apps, and info for new devices" when installing Windows 8 Pro?
What exactly will it do?
If I enable this, will Windows then automatically install software packages/drivers from the manufacturer, like for example the Logitech Setpoint software for their keyboards and mouse and similar software for other devices? I don't want or need that. Or will it behave like in Windows 7?
On my other PC with Windows 7 I see in Windows Update that there are a couple of optional updates, including that Logitech stuff, as well as some driver for a BenQ monitor I have and also nvidia video drivers. This kind of stuff I don't want or need installed automatically as important updates in Windows Update - so I am worried if enabling this automatic driver stuff in Windows 8 is different than Windows 7? Meaning that it will get installed secretly/automatically?
However, it's fine that Windows finds them so I can manually go and check if I want to install any of it.
The key is that the updates are optional in Windows 7, but I have seen a few people complain about Windows 8 installing stuff like video drivers and mouse drivers automatically.
View 2 Replies
View Related
Jul 22, 2014
I've installed Microsoft Windows 8.1 Version 6.3.9600 Build 9600 on my HP 430 Notebook PC with 1 GB RAM and Pentium CPU @ 2GHz 2 Cores.
Display drivers are not working properly (i.e., everything appears bigger and unclear), earlier I'd successfully updated the display drivers and made it work using Device Manager. making a backup of the drivers (may be in .inf format) from the installed drivers so that I don't have to update it every time I re-install it.
View 7 Replies
View Related
Sep 15, 2014
I'm running a custom build PC on which I clean installed a (legal) copy of Windows 8.1
My system works fine except it can not install drivers for ANYTHING non-standard. Keyboard, mouse, memory sticks, HDDs all work fine, however when I plug in my phone/tablet/camera etc via USB, it fails to install drivers and I can't use my device.
Here's what device manager looks like with my (android) phone plugged in
And when I select Update driver software, I get this error:
View 9 Replies
View Related
Jan 23, 2014
One day, I changed the configuration of IDE to AHCI through Windows registry and configuring the BIOS parameters. Today, I want to go back to IDE without reinstalling Windows. I do not know how to do.
View 4 Replies
View Related
Jun 10, 2014
So, I bought a new watercooler a corsair h100i (yay), before that I had a faulty h80i and replaced it. To make the system recognize the hardware I had to change some registries under
HKEY_LOCAL_MACHINESYSTEMCurrentControlSetEnumUSBVID_1B1C&PID_0C04 there were two folders (which I believe were one for each USB entry in my mobo hence I connected the watercooler to both of them when testing.
But after I installed the h100i which uses the same software it didn't work, so I tried to delete older USB entries so maybe windows would detect the watercooler as new again, but it dind't work, so I used USBoblivion and nothing happened, so I decied to delete those folders, well I couldn't delete them but the folders are gone, so I can't edit that. Is there A way for me to back that up?
View 5 Replies
View Related
May 14, 2013
Sometimes this message window appear and disappear as attached.
My motherboard is p6x58d premium and I installed every possible drivers. However this window is still coming.
View 9 Replies
View Related
Jun 10, 2014
I recently bought a cheap USB Hub off eBay. I plugged it in and connected my devices and it always works.
However, about 75% of the time when Win 8 boots, I get about a dozen "USB connect/disconnect" sounds and a window that says "USB Device not recognized". (sometimes 3 or 4 of these windows)
I've searched for this issue but every post that I find provides a recommendation for a USB device that is not working. None of these suggestions applies because after all the boot noise, the hub and it's devices work. It just seems like Win 8 is having trouble recognizing the Hub but keeps trying and eventually succeeds.
The Hub is plugged into a USB 2 port with a scroll wheel mouse and a Dymo LabelWriter 400 connected to the hub.
Win 8.1 Pro X64
Asus CM3870
Intel Core i7-3770
16GB RAM
View 7 Replies
View Related
Sep 9, 2013
No USB device seems to be getting detected on my machine when I plug in a flash drive or an external hdd I get the distinctive sound from my speakers that an USB device is plugged in but nothing is showing up in "My Computer". I went through the event logs and found that Windows is failing to load the USB device (check image in attachment logs.jpeg). Recently I installed iTunes, so I though it might be causing this problem but I uninstalled it even then the problem persists. I don't want to format my machine just because of this small problem. Is this a driver conflict ? How do I find out why windows is all of a sudden failing to load the USB devices ? I have uploaded a copy of the saved logs detailing this failure(logs.zip).
View 6 Replies
View Related
Jun 15, 2014
Every few weeks, I have to get my old graphics card and change the BIOS settings because the CSM mode just resets out of nowhere. The new graphics card isn't compatible with windows 8 so I have to go back and enable the CSM settings to get it to work. Is there a reason why my BIOS keeps resetting the next morning I wake up?
View 3 Replies
View Related
May 13, 2014
I have a Seagate GoFlex 1 Tb USB 3.0 drive. All worked good until a week or two ago. Now the drive will not be recognized when plugged into a USB 3.0 port, the error given is "Unknown USB Device (Device Failed Enumeration).
If I plug the GoFlex drive into a a USB 2.0 port, it works. I can plug USB 2.0 devices into the USB 3.0 port and they work. I just can't plug my USB 3.0 drive into a USB 3.0 port and get it to work.
I have tried uninstalling the Unknown USB Device in Device Manager. I've also uninstalled all other instances of it failing to be recognized.
My motherboard has a VIA VL805 USB controller. I've used the drivers on Gigabyte's site and I've used VIA's drivers, no difference. I have the latest BIOS for my motherboard.
The drive does not show up in Disk Management when plugged into a USB 3.0 port. This shouldn't be a surprise since the device is unknown in the Device Manager.
I thought the problem might be with the USB 3.0 cable or the GoFlex drive's USB interface. So I bought a new USB 3.0 docking station and...same problem. The new docking station also fails enumeration. Basically what it boils down to is a USB 3.0 storage device will not be recognized in a USB 3.0 port. But they work when plugged into a USB 2.0 port.
View 7 Replies
View Related
Jan 28, 2014
I have a strange problem: connecting a Canon Powershot G10 digital camera via USB 2.0 to my Win 8.1 laptop presents no problem (info pops up).
But: Using the same cable connected to my desktop PC, there is no reaction whatsoever. No device manager listing, no error message. The USB ports are all working perfectly with other devices (sticks, external hard drive, wireless mouse & keyboard). Moreover, until some weeks ago, the Canon camera was recognized normally.
Short of re-installing the whole USB controller
View 7 Replies
View Related
Sep 15, 2014
When I connect my DualShock 3 controller to my Windows 8.1 laptop it does not charge. I hear a beep, as in something was connected to the PC, then it seems to charge for a couple of seconds (lights flash on the controller) and then it stops. I am able to charge my phone and tablet so, it's just the DS3. It works fine on my Windows 7 computer, so it's not the controller.
View 5 Replies
View Related
May 11, 2014
Bluetooth device is not working
View 3 Replies
View Related
Sep 13, 2013
I want to change OWN Bluetooth device name. I am using windows 8 which comes with my new laptop Dell Inspiron 15z. The company has set my default bluetooth name as "User". However I want it to be changed but how.
I have tried going to Device manager, Devices and printers etc.
View 1 Replies
View Related
Apr 5, 2013
i Am trying to build my first PC with a Asus P8Z68M motherboard I have managed to get it all going but when I start it up its says - Using PCIE Gen 2 - cant find any device. What does this mean? Also, why does the PC beep at me whilst booting up?
View 9 Replies
View Related
Jun 15, 2014
So i purchased a Bluetooth portable speaker from a china it was very cheap and works great the website i got from is *REMOVED* and the model is the bv200 the only issue is that it has some annoying greetings and they are in chinese.
I want to know how can I access this device and delete or replace this greeting, it has a micro usb connection but when i plug it in to my computer it dosent show up in the device list.
View 1 Replies
View Related
Sep 15, 2014
A couple days ago, somehow, I turned on 'scanning your device' and now I get a black screen every time I plug my phone into the USB port to charge it. how to disable this 'feature'. It's really annoying because the connection is a bit worn, and it keeps connecting and disconnecting...connecting and disconnecting...connecting and disconnecting...connecting and disconnecting...connecting and disconnecting...connecting and disconnecting...connecting and disconnecting...connecting and disconnecting...connecting and disconnecting...
I don't want anything to happen when I plug the phone into the USB port.
View 3 Replies
View Related
Sep 15, 2014
I'm running Windows 8.1 on a SDD with a second HDD along side it. Inside the Device Manager I disabled my second HDD and rebooted my system.
Windows started as normal, but a few key windows programs have stopped working:
- Task Manager
- Device Manager (basically all control panel functions)
- Powershell (Command Prompt Works, but can't be opened with administrative rights)
The main problem is that I now can't enable my second HDD. Why the HDD is needed for these programs and how I can re-enable my HDD?
View 2 Replies
View Related
Mar 27, 2014
Recently my "PS to PC Converter" USB device, as shown in image was not recognized by my laptop. It was working fine as of yesterday, where I was playing FIFA with my friend. Then today when I plug it in, it says USB device not recognized even though I can still on the analog but the controller is not detected by the game. Other games that I use to play with controllers are also not detecting the device. I kept reinstalling the driver but still the same message. Restarting computer, turning it off for a few minutes did not solve my problem too. I'm pretty sure my USB ports are fine as my mouse, keyboard and hard drives are working in all of the USB ports.
EDIT: I check the Device Manager and found a yellow exclamation mark on Other Devices named "Unknown device", I check the properties and says Code 43 on the status. I Enable/Disable it, still the same message.
View 9 Replies
View Related
Dec 30, 2013
I got a speed camera detector thing for Xmas. I've downloaded the software for the device and when I plug the device in, the software doesn't detect it. The manufacturer sent me an email with a link to download and install the driver. The driver installed, but it still doesn't work. When I looked at the driver status in device manager, it says...
This device cannot start. (Code 10)
{Not Enough Quota} Not enough virtual memory or paging file quota is available to complete the specified operation.
I'm on a windows 8 HP Pavillion 15.
View 1 Replies
View Related
Jul 28, 2014
I use a Sandisk Cruzer Extreme USB 3.0 32gb flash drive. When I plug the flash drive in, autoplay does not come up however the flash drive shows up on My Computer, but not Device Manager. It does not show up on the tray (the "Safely Remove Hardware" icon), but other USB flash drives do. The drive is fully working and I can transfer files to and from the drive, I just cannot autoplay nor eject the drive safely.
I've done the obvious such as ensuring autoplay is enabled, formatting the drive, trying different ports, and now I'm not sure what the problem can be.
I've observed that it's only the first USB port on the front panel that has this problem, but all other USB drives autoplay fine on this port. (I think only usb 2.0 - 3.0 devices do not autplay)
View 2 Replies
View Related
Jul 11, 2014
So, it used to be okay on Windows 7, but now the iPhone icon is not showing up in Windows Explorer or in "Devices and Printers".
[URL] ..... Picture of my computer with no iPhone image.
[URL] ..... Devices and Printers (See the Kodak icon? That's how I want my iPhone 4S' icon to be)
OS is Windows 8.1 Pro with all the latest updates.
View 1 Replies
View Related
May 13, 2014
I have got a problem with bluetooth device. I tried removing my bluetooth device but it failed to remove. It is displayed as "removing device" on the screen as shown in the picture. Now I cannot add the device again. I don't find the device when I search by clicking on "add a device" as shown in the picture. When I try to add from my mobile device it fails to add by showing a message as shown in the next picture.
View 4 Replies
View Related
