Every few weeks, I have to get my old graphics card and change the BIOS settings because the CSM mode just resets out of nowhere. The new graphics card isn't compatible with windows 8 so I have to go back and enable the CSM settings to get it to work. Is there a reason why my BIOS keeps resetting the next morning I wake up?
View 3 Replieshow can i get back to default account picture in win 8.1? I want follow picture...
View 9 Replies View RelatedI have recently undertaken to get my pictures folder all sorted out and I have got a couple of thousand pictures there. I have been trying to make individual folders within my folder in categories so that I can sort things.
The problem is that in each of these folders I have to keep clicking on "View" and then "Extra Large" over and over again. Isn't it supposed to stay like I put it without me having to re-tell it over and over? It keeps going back to the default size of the pictures.
tiring to have to keep on re-setting the picture sizes for the hundredth time.
When I boot to windows 8 I get a blinking cursor in the top left corner for about 1 second, then I get sent to the BIOS. If I boot to my Linux hard drive however everything works fine.
I figured I would just install a fresh copy of windows, but when I boot to the install disk (I tried both 64 and 32 bit), the windows 8 icon shows up and I get the spinning dots for maybe 10 seconds or so then I just get a blank back lit screen. Is it just coincidence that my drive failed at the same time as both disks failed or is there maybe something hardware related?
I have a Dell inspirion 15 laptop running Windows 8.1. A while ago I decided to try Ubuntu out. I installed it alongside Windows 8.1 in dual boot configuration with its own separate hard drive partitions. This means that when I powered on my laptop a GRUB menu (Linux boot manager) would come up allowing me to choose between Windows and Ubuntu. However, Ubuntu was more pain than it was worth so I decided to uninstall it. I did this by deleting the hard drive partitions that Ubuntu was installed on using Windows Disk Management. Now when I power on my laptop the GRUB menu still comes up but there are no options to choose from, only a command line interface. I now have to type Code: exit
which exits GRUB and takes me to my BIOS Boot Manager which looks like this:
Boot mode is set to: UEFI; Secure boot: OFF
UEFI BOOT
ubuntu (ST500LM012 HN-M500MBB)
UEFI Onboard LAN IPv6
UEFI Onboard LAN IPv4
Ubuntu (ST500LM012 HN-M500MBB)
Windows Boot Manager (ST500LM012 HN-M500MBB)
I then have to select Windows Boot Manager to boot into windows.
Why GRUB is still there even though I have deleted the Linux hard drive partitions? Also, why is Ubuntu still listed on the BIOS Boot options? And why is it listed twice?
I am trying to change my MTU value, after changing in cmd(admin) it says "Ok" but when I reboot, the value switches back to the default value(1500), how to change it to the value(1492) I have set in my router.
View 9 Replies View RelatedI set up cursors for the mouse pointers and save the changes, then the next time I reboot they revert back to the default settings. Is this just Windows 8?
View 9 Replies View RelatedI have two wifi adapters i have been trying to get to work consistently with no luck for several days now. One had been working fine for a few weeks, then it stopped, i tried switching, and that one worked for half a day, then it stopped. Once it stops working the connection is 'limited' but works fine on other machines, or it says it is connected in settings but Chrome says it isn't online. So i wanted to try to install a different driver, having read that this can often be the solution.
But in both cases, there is no old driver to roll back to, and when i try to tell Windows to load a driver i've downloaded or have on a disc, it says, no, the one it already has is 'up to date', and it won't do it. Is there some way to dig around in the system to get rid of the driver it claims is better so i can try another one?
I recently purchased an Asus N56VJ with Windows 8 pre-installed. At first I was trying to downgrade to Windows 7, but could not get past the windows splash screen trying to do a clean install . Anyway, while I was trying to figure out how to install windows 7, I was messing around in the bios. I decided to just stick with the Windows 8, but my bios is screwed up. I do not have any boot configuration options anymore. I tried to flash my bios, but the bios was still the same. I did a full reset on my machine, and still no change in the bios. Is there any way to get my bios options back to the factory settings with all the options?
View 4 Replies View RelatedMy laptop keeps shutting down. It shut down just now 10.05pm british summer time. It also shut down yesterday and has shut down every now and again for the past few weeks.
It isn't overheating, i ran speccy and its ok temps. I run windows 8 and when it shuts down the screen behaves as if I have pressed the shut-down option at the bottom left of the screen, but I have not pressed it, it just does it automatically.
What checks I can do to find out what the problem is.
First it was with Windows 8.0 and now again with Windows 8.1 and I just can't seem to get to the bottom of it.
It starts when I play a game. The sound drags (almost lags) when playing and exponentially seems to get worse.
Like there is something huge taking up my memory but when I check with the task manager I find that I have a substantial amount of RAM free.
I have given this some thought. Either My audio drivers are incompatible with Windows 8, but I doubt that's the case since it did work 100% in the beginning. It just got worse as time progressed.
Or my local hard disk has a problem. How can one tell if it is the hard drive? Is there a program out there to check this?
Lastly it could be my RAM but I have done a memory check and everything seems fine.
How do i get back Windows 7 sound's (Default one) to Windows 8?
View 5 Replies View RelatedA while ago I tried to put a new HDD in my laptop and got a message saying something a long the lines that the disk wasn't recognised (forgot exact message)
I took the computer to my computer repair shop and they installed the HDD I asked them if it would be easy for me to do it and they said yes it was just a case of resetting the BIOS.
how to reset the BIOS so I can install a new HDD?
I've installed HDD's in windows 7 machines and it was just a case of inserting the disk- I didn't have to mess with the BIOS!
I have a Lenovo G510 i7(which does not seem fantastically faster than my celeron Samsung R530!). I have replaced the DVD with a SSD. I have cloned the HDD to the SSD, made changes in the BIOS(changed to ACHI,switched to Legacy, put the SSD first in boot) but get the message "no bootable device insert disc and press any key". If I use UEFI I do not see the SSD. I have googled this until my finders are sore to no avail. How to boot from the SSD and once I can do this can I reformat the HDD? The SSD is called A:, the HDD C:. I cannot change the drive letters.
View 9 Replies View RelatedOne day, I changed the configuration of IDE to AHCI through Windows registry and configuring the BIOS parameters. Today, I want to go back to IDE without reinstalling Windows. I do not know how to do.
View 4 Replies View RelatedSo, I bought a new watercooler a corsair h100i (yay), before that I had a faulty h80i and replaced it. To make the system recognize the hardware I had to change some registries under
HKEY_LOCAL_MACHINESYSTEMCurrentControlSetEnumUSBVID_1B1C&PID_0C04 there were two folders (which I believe were one for each USB entry in my mobo hence I connected the watercooler to both of them when testing.
But after I installed the h100i which uses the same software it didn't work, so I tried to delete older USB entries so maybe windows would detect the watercooler as new again, but it dind't work, so I used USBoblivion and nothing happened, so I decied to delete those folders, well I couldn't delete them but the folders are gone, so I can't edit that. Is there A way for me to back that up?
I made a bit of an error, I bought a new joystick to play MS flight Sim X and installed it etc .
I went to uninstall the old driver before installing the new one, and made the error. I really don't know why I did it but I went into view devices, right clicked on the icon for the Joystick and removed it
Is there any way to get it back, I have tried to reinstall the driver but it still does not show on the devices panel and i cannot use it ..
I have a Samsung DP700A3D All-In-One. It came preinstalled with Windows 8. I remember it being version 6.2 (?). I always seem to try things above and beyond my skill set (Current Computer Science student). I installed Ubuntu 13.04 64 bit alongside Windows 8 with no problems. I aloud the Ubuntu to do the partioning. It used Grub2 for bootloader. I wasn't happy with that wanting to use Windows Boot Manager. After changing this and reloading that, somehow the windows 8 partition did a recovery. I can now not boot anything. I'm currently on Ubuntu live CD. I can see the drives from here. There are partitions labeled SAMSUNG_REC, SAMSUNG_REC2, 487 GB Volume(Windows files inside), Windows RE tools, and 481 GB Volume(Ubuntu files inside). When I boot the machine, I get the Install Boot Media ?? comment at attempted start-up. When I was setting up the Ubuntu alongside Windows I could access BIOS(?) with an F2 press at initial flash screen. Now I cannot. I can do nothing but run the Ubuntu Live CD. I don't want to try Fresh install of Ubuntu because there are files on Ubuntu partition because there are files that are too large for me to back-up else where that are very important. I KNOW .... BACK-UP BACK-UP BACK-UP!! It however is too late for that..
View 4 Replies View RelatedI have been trouble with a few bsod problems and i was instructed to change my ram timings to 9-9-9-24 so i did and i also changed my frquency to 1333 but hen when i go into cpu-z i get different results or is this the same.
View 8 Replies View RelatedI have bought me a new computer with a ASUS Sabertooth V2.0 GEN 3 motherboard with UEDI BIOS utility.
I want it to start at 9 in the morning.
Some time ago I replaced an IDE hard drive with Windows 8 installed for an SSD drive onto which I installed Windows 7. I would like to know if I can temporarily swap back to the IDE drive (Windows 8) while I obtain the Windows Product Key (embedded in BIOS apparently) and then replace the SSD drive (Windows 7), or boot from an external docking station and if so how do I do that?I am totally confused about the BIOS. Does a different OS change the BIOS details?
View 5 Replies View Relatedhow to change my BIOS into UEFI. I tried to flash a UEFI BIOS file attached on Acer website but it wont start flashing. The latest version of UEFI installer is not responding when I want to flash it, the older version said I need to have the same type of BIOS installed. how to install UEFI on my system?
View 9 Replies View RelatedI have recently built a new computer and installed Windows 8. All was running fine (including USB devices such as iPhone, flash drive etc), however since upgrading to Windows 8.1, none of my USB devices are showing up at all. Oddly, the mouse and keyboard still work.
When I go into the BIOS, all my devices (iPhone, Flash drive, keyboard and mouse etc) all show up in there, so I'm guessing it's a driver/Windows 8.1 issue that I'm missing?
I have been to the ASUS website and downloaded all the drivers I can find, but still no luck.
My motherboard is an "Asus Z97 Pro". I have tried contacting Asus support, but they are completely useless!
Ever since switching to AHCI mode, I've noticed that my keyboard has issues with the volume wheel not working properly. Also after setting up the LED lighting on the keyboard and a few restarts later, I've notice that when restarting my system the keyboard LED, blue in this case, will automatically show up and when it does, and I use the del key to get into BIOS doesn't work. I have to move the the usb connection to a different port, restart and keyboard LED will be white. This time using the del key, I can get into my BIOS no problem. This never happened when I was using native IDE mode.
View 1 Replies View RelatedThis is my motherboard: Motherboards - MAXIMUS VI FORMULA
I am trying to update the BIOS, but don't know how. What is the easiest method to update the BIOS?
I have a CM6730 Asus PC with a P8H61-M PRO/CM6630 motherboard.
I was having problems getting good Graphics performance and the topic of Integrated vs discrete GPU came up, the options in the BIOS were set to use iGPU, since then I do not get the option on boot to enter the BIOS.
I have tried ASUS but they want me to send the unit in for repair.
My rig has Windows 8.1 fully updated.
I can't enter my BIOS/UEFI after activating "MSI Fast Boot" in the BIOS/UEFI.
I read somewhere about "GO2BIOS",but my installation disk didn't came with that software.
MB: H81M-E34 (MSI Global H81M-E34)
When startup pc (black screen) massage displayed" Please insert correct disk" message exact forgot. Next a few second this is massage displayed:"Please floppy disk insert to drive A" again massage exact forgot.
Will be updated via USB BIOS . What should I do to prepare a USB?
Went to boot up my Acer this evening to no avail. I can see it start to cycle through searching the DVD drive and see the read/right red LED light for the hard drive go on for about 5 seconds, then nothing. No BIOS test pass beep. I know that it beeps once for passing, then continues to boot.
I took the side panel off and reseated all the connections including the Mem strips. At one time I left a strip out intentionally for a continuous beep, which is what it's suppose to do.
My PC specs: Asus P8Z77-V with a SATA2 WD Caviar Black 500GB. The HDD has four partitions, and I've had Windows 7 32 bit installed on C:/ for three years. Windows 8 was just installed four months ago.
Before this, I had my Windows 8 and BIOS ahci-enabled C:/Windows 7 <> D:/Stuffs <> E:/Windows 8 <> F:/Stuffs
Yesterday, I needed some space on my F:, so I started Partition Wizard (I used this program a lot before with no problems) and cut 9gb from C, after that queue it to extend F: that much space.
Because C: is located first, but F: is located last, PW created 4 queue, which is cut -> move D: -> move E: -> extend F. The two first actions were performed fine, however when I restart as PW promoted, I was stuck at the BIOS, unable to access BIOS, with the red led lit on the P8z77-v, which means there was a problem with a boot device. If I unplug the HDD, the system goes into BIOS just fine, but obviously can't boot anymore.
There is a lot of important data on that disk which I can't afford to lose. My problem sounds almost like the same as this one: [URL] ....., however when he changes his BIOS to IDE mode, his HDD booted into Windows 7. However, mine doesn't. I've disabled Secure Boot, but that doesn't work either. It just stucks at the BIOS splash screen.
Currently I am considering to burn a PW CD and hotswap the HDD in order to fix the MBR and stuffs.
I have been experiencing problems trying to back up to external hard drive this week and keep getting an I/O Error with various error messages including 0x8007045D My Hard Drive is "G" and I can see it through my computer no problem and I also have my ITunes library on it and the ITunes music is working fine.
I am getting a message in Action Centre saying my Back Up did not complete successfully and then I have the option of Try to Run Again or change back up settings. If I select Try to Run again windows cannot find the disk or network location and if I change settings "G" does not appear. It seems Back Up has detected an error on my "G" which is preventing it from running the back up.
Also in Disk Management I am prompted to initialise a disc before logical disc manager can access it so I select MBR and I get I/O device error and disk 1/G is unknown/not initialised.I have tried powering the external drive off/on and also disconnecting it from the computer but no difference and at present I cannot save anything to the external hard drive. There is a previous back up already on the hard drive but this is not accessible at present.clearing this error so I can back up again without loosing what is stored on the hard drive in particular my ITunes library.