Hardware Drivers :: Removed Drives From Hard Disk - How To Recover Without Affecting Data
Jul 26, 2014
I used four drives in my hard-disk. I needed to extend volume for my C drive. So using the Disk management utility I was trying to shrink the drive F (as it was very next to C, as in Disk management). But something happen accidental here. I found that two of my drives E & F went missing after the operation. Also my laptop suddenly restarted (after perform a checking task). I am not sure how this happened and looking for a way to recover the lost partitions as they are seen still exist, including the data.
I was only trying to shrink around 283 mb of volume from a drive with 138 gb, as an experiment basis, to see it work. On that process the drives were lost and those are not shown into my windows now. Using a software EaseUS Partition Master, I could still see the drives still exist as they contain the data as used spaces, and also show the unallocated space of 283 mb but I am not finding a way how could I recover my partition without affecting the data.
I was trying to install elementary OS alongside Windows but when the installation was finishing it crashed. When I went back to Windows my hard drive didn't appear and now it says in Manage>Storage>Disk Management Disk 1 Dynamic - Invalid i posted a picture of this.I tried with Ubuntu then on the other disk same thing happened. Is there a way to get them back to normal without losing the data?
I had Windows 8 32 bit installed on a WD5000AAJS 500 GB hard drive that died on me. I had a backup of it made using the free version of Paragon Backup & Recovery. Apparently there is something wrong with the disk image so I am unable to recover from it (spent the past week trying everything I can think of or find on the internet to get the image to work). Anyways, there are some files on the hd that I would REALLY like to recover.
I can connect the HD to another PC running Win 7 and it starts to spin (no noise or excessive vibrations). The PC sees the HD as an unallocated drive with 134217728 GB when I look in Computer Management. I read somewhere that this represents the largest possible size for a Win 7 HD (something like that - I'm sure I'm wrong, though). Anyways, I was thinking that since at least the HD spins and the PC can see it, there must be some way to recover the files off of it. There is a MySQL db on there that I would like to recover and some batch and vbscript files I would like to recover.
I got a new Toshiba Satellite L50-B notebook with Windows 8.1 64-bit installed. As I need to go a special place, I passed the notebook to a IT guy and have the whole disk encrypted using DiskCryptor. The guy told me that he cannot boot the OS, even he entered the correct password. And one more nice thing. The guy did NOT make recovery discs first!
Since the hard disk is encrypted I cannot boot it. Also I cannot do a system recovery. I booted the notebook into Linux and copied all the content in the recovery partition to a USB drive.
Now, I would like to know if I can get my machine up and running again. I don't mind all my content will be lost as it is a new machine.
How to make a set of custom recovery disc out of the content in the recovery partition? Do I need to format my hard disk in UEFI mode? if so, how?
I am clean installing Windows 8.1 and Ubuntu on a friends new laptop and although I have taken Clonezilla images of partitions on my personal laptop should I ever need them I was hoping there was something more user friendly I could install on my friend's laptop. Anarethos Recovery Toos with Media Creator seems to be what I am after but I am not sure if that will mess up the boot settings or even completely remove Linux.
Ideally I am looking for something that can be launched by holding a hotkey down at boot. When launched it will offer to restore the main Windows 8.1 system partition (GPT) with all drivers and programs installed exactly how it is when I hand it over, and if possible offer to restore the Ubuntu /home partion. The crux is that Windows can be restored without affecting Ubuntu.
I am currently running Windows 8 64 bit and when I go to "My Computer" it is only showing my C: drive. I know my other drives (internal, external and dvd) are working because I can enter the directory name (ie. H: or E:) into the address bar and the content appears. Is there any way to fix this problem so that they show up in "My Computer"?
Just purchase this HornetTek X2-U3 JBOD USB 3.0 (HT-3210U3) - 3.5" DUAL BAY - JBOD - HDD ENCLOSURES
The only reason was because I had a spare 1TB drive and 500GB drive that I wanted to span into one volume, according the product spec it supports JBOD, which from my understanding should allow hard drive spanning, I understand that if one drive goes the data is lost, but that is not a concern of mine as I have numerous backups of my data. The problem is when I try to span 2 disk I get the following error "The operation is not supported by the object"
First of all.. let me say that this HDD does not have any kind physical damage. It has not been dropped.. nor it has a clicking or beeping sound.
The HDD is SeaGate FreeAgent Go 250 GB. I always watch movies in bulk. So I copy it to my HDD and plug it in the TV and use it. Today when I plugged it in to my PC for watching another set of movies, the copying was not going in a stable manner.. instead the graph showed mountain-like copying.. i.e. first it goes at much speed and then it loses and fall back to 1 or 2 mb/s.. So I thought that a defrag could set things right.
I defragged it and went for a coffee.. After coming back, the defrag was complete but i was unable to open the HDD.. I safely removed it but it said it was in use.. I shut down my PC and unplugged it.. turned on my PC but when I insert my HDD its unreadable.. it shows no percentage of free space.. only just Local Disk F.. ( earlier it used to show FreeAgent GO) I ran chkdsk F: /f /r.. but it showed some error.. I closed it. The log file is attached..
Now whenever I open my HDD, its stops responding.. I know it can be solved..
my WESTERN DIGITAL hard disk was running smoothly and i can access all datas.....but today 1 disconnected it and there after it is not showing on "my computer"...
bt d indicator light is on and it is rotatng insise......but cant access it ....
I was going to reinstalling windows on my computer and i thought put 200gb for windows 8 and and 1300gb can be for windows 7(for gaming), So i install windows 8 and shrink the hard drive size so windows 8 has 200gb. And use windows 7 for gaming but my pc is a bit s#*t and a dont do gaming any more. (only on the ps3).
So can i unshrink or something so i have 1.5tb together for windows 8?
Over the last couple days, I built a new PC and installed windows 8.1. Initially I had some issues installing windows, so I unplugged all my drives except the SSD and DVD. I installed windows to my SSD.
Everything works great!
Now I started adding my drives back in 1 at a time. When I plugged my 2nd SSD in, it showed up in BIOS, but not in Disk Management or Device Manager. So I booted back into the install CD, it showed up in the disk manager there. Since this was also a blank SSD, I partitioned and formated the drive from the install CD, then exited the installer and booted back to my windows drive.
I have 2 SSD drives working great!
Now to add my 2TB HDD... Same issue, it shows up in BIOS and the install disc, but not in Disk Management or Device Manager. This drive does not have a boot partition on it, however, it does have two existing data partitions. They were made from my previous windows 7 system and the option to delete these partitions is grayed out in the install disc menu. I also have some data that I would like to keep on it. I have a USB dock that I can use to read the contents of the disk just fine. Everything is there and in working order.
What is different about Windows 8.1 that is preventing my hard drives from showing up in windows proper? I am reading things about UEFI online, but nothing seems to fit my exact scenario. I will try and post some screen shots when I get back at it.
Asus Zenbook UX51VZ / Windows 8 OEMUpgraded to Win 8.1 around three weeks agoFaced no problems (surfing, media programs, games worked fine)Last Friday during startup I received an error message telling me that something isn't correct and that windows will try to find the problemGot “directed” to the following menu Refreshing doesn't work as my hard drive seems to be blockedCan't select any restorable system images (as there aren’t any)I really don't want to format my hard drive! Tried to safe my data by looking everything up, managed to gain access to my second partition on which I had only media files. Still, I urgently need to get the files on my C: drive back.
How I recovered my data on D: :
Ubuntu Live CDBoot Ubuntu instead of windows (which can’t be booted anyways)Nautilus, selected D:/ (called DATA)Received following error message: "Error mounting /dev/dm-6 at /media/ubuntu/DATA: Command-line `mount -t "ntfs" -o "uhelper=udisks2,nodev,nosuid,uid=999,gid=999,dmas k=0077,fmask=0177" "/dev/dm-6"
1 is 55gb kingston ssd where i run my windows 2 is 1tb hitachi where i keep my games and other junk 3 is seagates 250gb laptop hdd.
The main problem was that sometimes when opening or just clicking some folders freezes the file explorer and it crashes after it, so i tought to format the second hdd to make it work better now it seems work ok except for moving files from hdd to another.
When copying the copy speed just at random point drops to 0% and leaves the hdd 3 to hang 100% and the hdd 2 is dropping to 0%. What i have tried:
I ran hdd regenerator and 18 bad sectors were fixed Also tried to change sata ports That's not much but can't figure anythin else for now and i am starting to suspect that my hdd is gone bad :/ also when downloading ~100mb file from internet it makes same thing but i don't know is it same problem...
i accidentally dropped my hard drive its a 1tb buffalo hd-pntu3,,now when i go to disk management in my computer its showing up as disk 1 unknown allocated,,and when i try to initialize disk its greyed out!,,i have a lot of files on this drive
i am trying to recover my Data from WinXP HDD.So i connect WinXP HDD to Win8 PC via External USB Drive, there after in Win8 it is recognised my External USB Drive, but when i go inside and clik on "My Documents" then Security Warning shows like "Administratire or click on Security Tab to disable this warning etc",
after this suddenly my WinXP External Drive is not recognized any more. I want to let you know this, i already disable UAC warmimg in my Win8 PC, by scrolling Bar totally down, so none fix this issue.
And i want to let you know this 100% my WinXP HDD is good, it is possible to Recognised on any PC with out any problem,. So i like to know "How to Recover Data of another o/s on Win8 PC"
I did this Test : When i connect this WinXP external HDD to win7 PC then i am able to recover my Data successfull with out any problem. Where as on Win8 PC this is not possible.
I was wondering is there any way to increase the data transfer rate on SATA drives. My MB has SATA 3 and I have a Samsung HD 154UI drive on SATA /300 where I have Windows 8 x64 installed. The performance under Windows is 5.9. This is the lowest on the list. CPU 7.4, Memory 7.4, Graphics 7.9, Gaming graphics 7.9, Hard disk 5.9...Is there a way to get it higher without replacing the drive. The drive is new (only 3 months old) I have two of these drives and two Seagate drives that are 2 tera which are 1 year old.
I have an Inspiron 14Z 5423, and my hard drive crashed, after running the dell diagnostic tool, it pops up an error code 2000-0142 when it starts analyzing the hard drive, but despite this, i can still access the hard drive using Ubuntu Live DVD ...
Any ways, i noticed there is a second hard drive/partition of 32 GO which i think is supposed to contain the OS image or something similar, so if i buy a new hard drive, could i recover my original windows OS ?!
I have a pc with 4 drives. And I got a new job, working from home and i wanted to make one of the drives just for work. It was one that i had windows 7 one and no longer used after i bought an ssd an put windows 8 on it. I am really liking 8 and so I put 8 on the second drive that had windows 7 on it.
It all worked fine, but when i tried to have two windows 8 drives on the same pc it made the drives unbootable. I had to re install windows on both drives again. I did some reading and i think its the fast boot feature of windows 8 that's causing the issue. I disabled fast boot on both hard drives. And before I plug them both in at the same time. I want to make sure that im not going to loos all my data again.
After suffering a Windows 8.1 boot failure, and despite manyattempts at recovery, I finally had to reinstall my WIN 8 Boot disk, then usethe free update download to reinstall WIN 8.1.Since getting the PC up and running again. I have connectedthe original disk via a USB port, and tested it with cHkdsk and anti virus software, which both give it a clear bill ofhealth. And I can see all the original folders.Unfortunately due to the change of boot disk, I have lost mypast two months Windows Live emails. Is there any way I can recover them fromthe original Disk ?
Just bought a HDD on amazon and I was wondering if it comes with an SATA cable. It didnt say it did, nor did it say it didnt include one. If not, where could I buy one?
I purchased an Acer laptop from EBay. It was listed as a refurbished unit. However it looks like it was a complete system wipe and OS replacement. There are no Acer hardware drivers installed and no Acer applications available. My real problem is that the computer has been set up with two hard drives visible in "Computer" a (C drive and "New Volume (D. I believe that when this computer was "refurbished" the installer improperly assigned the drives. In disk management the drives are labeled Disk 0: System reserved 350 MB and New Volume (D 297.75 GB. Disk 1: (C 18.64GB. The C: drive is completely full, with the OS however, it is also the default drive meaning that everything tries to install to that drive, but can't. I want to move the (C drive to the New Volume (D drive or merge the two drives together. Is there a way to perform this task so that the computer will boot up into Windows 8.
Computer: Dell Inspiron 530 Operating System: Windows Vista home prem. upgraded to Windows 8 home Pro. 32 bit. BIOS Rev. 1.0.15 Hard drives: (# 1) Samsung 500 Gig with 2 partitions. (# 2) WD 500 Gig with 2 partitions. Clone of #1 Ram: 3 Gig
Problem: On start up with either drive, the system goes to a blue screen with a clock (different time zone) on pushing Ctrl + Alt + Delete a log in prompt comes on. After logging in a window with the circling dots and Preparing Windows comes on That stays on for about 4 minutes and then a black screen comes on. Pushing the power button will cause Shutting Down to appear breifly and then the machine shuts down. I have a backup of Drive #1 on an external drive.
Is it possible to have two hard drives in the computer and to be able to choose which one to start with ?
I have in mind that one hard drive has all my normal programs and the other is used for Flight simulation program.
Both hard drives would have win 8 installed. If I could use one hard drive and partition it so the flight sim is on a separate partition. However, for two reasons I wouldn't want this as the flight sim with scenery requires a lot of Gigs. and secondly I believe that it would run faster on its own hard drive.
So. Is it possible to set up the computer to decide which Drive I wish to start ? and if so, how to set it up ?
I have a Toshiba Satellite P855. it has an i5 processor, 8 gig of RAM, 64 bit os. running windows 8. 3 USB ports. Im not sure if they are all usb2. MY problem is that i can't connect any of my external hard drives to my laptop. When I plug them in to my desktop running windows xp, and my other laptop running windows 7, everything is fine, but my laptop running windows 8 doesn't even recognize that anything is plugged in to my usb ports. I have a lot of files, pictures music, and video files that i would like to have easy access to on my new laptop.
I'm trying to recover lost partition and files from external USB hard drive (Maxtor Portable 250GB). I'm using disk Internals sofitware and the software finds the files, but when I try to save them on the drive, each time I get a watchdog, or another BOSD error.
I read the tutorial on removing the Windows password requirement. I changed the settings per the example, everything seemed ok, I restarted and it logged me in as expected, but then it took me to the desktop and opened up all of my external hard drives. I then changed the setting back to requiring a password and still the same result. I have restarted several times and still the same condition.
I made a bit of an error, I bought a new joystick to play MS flight Sim X and installed it etc .
I went to uninstall the old driver before installing the new one, and made the error. I really don't know why I did it but I went into view devices, right clicked on the icon for the Joystick and removed it
Is there any way to get it back, I have tried to reinstall the driver but it still does not show on the devices panel and i cannot use it ..
I have Win 7 on a 60gb ssd hard drive. I would like to put another 60gb ssd drive in my computer and run win 8 off of this. Is it possible to run this as a dual boot system. Will I get the option to boot into either when I boot up.
