I was going to reinstalling windows on my computer and i thought put 200gb for windows 8 and and 1300gb can be for windows 7(for gaming), So i install windows 8 and shrink the hard drive size so windows 8 has 200gb. And use windows 7 for gaming but my pc is a bit s#*t and a dont do gaming any more. (only on the ps3).
So can i unshrink or something so i have 1.5tb together for windows 8?
[URL] .....
Over the last couple days, I built a new PC and installed windows 8.1. Initially I had some issues installing windows, so I unplugged all my drives except the SSD and DVD. I installed windows to my SSD.
Everything works great!
Now I started adding my drives back in 1 at a time. When I plugged my 2nd SSD in, it showed up in BIOS, but not in Disk Management or Device Manager. So I booted back into the install CD, it showed up in the disk manager there. Since this was also a blank SSD, I partitioned and formated the drive from the install CD, then exited the installer and booted back to my windows drive.
I have 2 SSD drives working great!
Now to add my 2TB HDD... Same issue, it shows up in BIOS and the install disc, but not in Disk Management or Device Manager. This drive does not have a boot partition on it, however, it does have two existing data partitions. They were made from my previous windows 7 system and the option to delete these partitions is grayed out in the install disc menu. I also have some data that I would like to keep on it. I have a USB dock that I can use to read the contents of the disk just fine. Everything is there and in working order.
What is different about Windows 8.1 that is preventing my hard drives from showing up in windows proper? I am reading things about UEFI online, but nothing seems to fit my exact scenario. I will try and post some screen shots when I get back at it.
System:
Mobo- Asrock Fatal1ty Killer z87
CPU- i3 4330
GPU- Gigabyte 660 OC
SSDs - Kingston V300 120GB
Windows 8.1 64bit
I have a Western Digital external hard drive. Model WD5000C032 500GB. It's an older device that was working just fine on my Mac (I don't know what OS it was running and do not have access to it any longer). I have brought this HD with me and am now trying to use it on my Windows 8.1 lap top. When I plug it in, the device is not assigned a letter. I can search for it in disk management, but it is uninitialized. I have right clicked on the drive to initialize, and receive an error message "the specific disk is not convertible because the size is less than the minimum size required for GPT disks." I searched and suggestion is downloading and using Partition Wizard. I downloaded the program and opened the wizard, but it does not see my hard drive. The screen shot will display as far as I've gotten.
View 9 Replies View RelatedThe program Acronis True Image failed when attempting to clone win 8.1 C drive. The destination disk is now hidden in File Explorer but is present in Disk Management (and in Device Manager). The Disk Management command "Change Drive Letter ..." is grayed out. How can I unhide the drive?
The drive in question appears in attached screen shots as Disk 6 but is missing from Explorer.
My ssd broke so I went got a new one today I do a fresh install of win 8 but its showing up as removable disk .
My PC specs-sabertooth fx990 r2.0 mb. Windows 8 ...
i accidentally dropped my hard drive its a 1tb buffalo hd-pntu3,,now when i go to disk management in my computer its showing up as disk 1 unknown allocated,,and when i try to initialize disk its greyed out!,,i have a lot of files on this drive
View 6 Replies View RelatedHave 2 hard drives (SSDs).
Drive 1 : OS Win 8.1 for general web, office and junk running
Drive 2 : OS Win 8.1 for tweaked hobby work; Audio recording etc
Whilst I wish to not physically disconnect the drives on each boot. I would like to have the alternative drive hidden and not impacted when the other drive is running for the OS.Boot up from Drive 1 this currently shows as Drive C: and the secondary drive with the OS installed as D:
Boot up from Drive 2 this currently shows as Drive C: and the secondary drive with the OS installed as D:
End aim
Boot up from Drive 1 this currently shows as Drive C: and the secondary drive with the OS installed not running or showing on the system and vice versa. Is the online offline function what I need to use or is this going to put the drive offline for the system as a whole.
So I've been playing around with FreeNAS on another rig, you install the server on a USB drive and run the server form the flash drive. I've decided to go another rout and not use free nas so I went to format the 2 flash drives I was messing with and there are some partitions I can't remove with disk management, and space missing.
disk 1.jpg
Disk 3 should be 4GB large but I can only find the 943 MB
disk 2.jpg
disk 3.jpg
It doesn't give me any options to change the volumes on Disk 4.
I have read some threads other info about shrinking the c drive where the os is,but none have ever said that it cannot be shrunken using the windows provided disk management but seems to talk around it?
View 9 Replies View RelatedI just bought a new SSD and did a fresh install of windows going from Windows 7 to 8.1.
I simply took out my old SSD and put in the new one, and installed windows 8.1 pro from a USB stick onto the new ssd.
2 existing HDDs were left on there, I'm also replacing them but I want to format them first to remove all data.
Disk 1 is the new SSD that windows was installed on. It is "Healthy (Boot, Page File, Active, Crash Drump, Primary Partition)"
Disk 2 is the drive I want to reformat and replace, it is "Health (System, Primary Partition)"
How do I make the C drive (Disk 1) the System disk?
I have backed up all the files I want to keep onto an external hdd.
I was wondering what you'd recommend for the following:
I want a program that synchronizes my files with my external hard drive.
The client I use right now, Memeo Instant Backup, is decent, but has the following issues:
1. Takes a lot of resources to run
2. Is extremely slow
3. Doesn't mirror deleting files on my hard drive, keeps them on my external and causes it to get full
Is there a program I can use that just literally copies my user folder onto an external drive, and as I delete/move files on my hard drive, its mirrored on the external hard drive?
Unable to start Disk Management. I tried the following without success:
- Check file integrity
- Repair with DISM
- Start the Virtual Disk Service and Volume SHadoy Copy manually and set them to Automatic and Manual (it starts, but Disk Management cannot connect to it)
- Disable Firewall and Antivirus
- Verified that my system is malware free
- Tried opening it in Safe Mode
I'm booting off my SSD which is drive C: and I have games and programs on an extra hard drive which was origanally drive H: but after a restart it switched to I: and when I go into Disk Management to change it Drive H: isn't there.
View 3 Replies View RelatedIE won't work, Windows Store won't access, Can't "Refresh" without OS Disk, Won't access extra hard drive or format. Using Windows 8 Pro, don't have original disk. Can I purchase another Windows 8 Upgrade disk and install it to resolve this problem?
View 3 Replies View RelatedIs it still possible to bring a disk offline using Disk Management (diskmgmt.msc) in Windows 8 the same way it was possible in Windows 7 or is using Diskpart.exe the only way?
View 5 Replies View RelatedFirst of all.. let me say that this HDD does not have any kind physical damage. It has not been dropped.. nor it has a clicking or beeping sound.
The HDD is SeaGate FreeAgent Go 250 GB. I always watch movies in bulk. So I copy it to my HDD and plug it in the TV and use it. Today when I plugged it in to my PC for watching another set of movies, the copying was not going in a stable manner.. instead the graph showed mountain-like copying.. i.e. first it goes at much speed and then it loses and fall back to 1 or 2 mb/s.. So I thought that a defrag could set things right.
I defragged it and went for a coffee.. After coming back, the defrag was complete but i was unable to open the HDD.. I safely removed it but it said it was in use.. I shut down my PC and unplugged it.. turned on my PC but when I insert my HDD its unreadable.. it shows no percentage of free space.. only just Local Disk F.. ( earlier it used to show FreeAgent GO) I ran chkdsk F: /f /r.. but it showed some error.. I closed it. The log file is attached..
Now whenever I open my HDD, its stops responding.. I know it can be solved..
my WESTERN DIGITAL hard disk was running smoothly and i can access all datas.....but today 1 disconnected it and there after it is not showing on "my computer"...
bt d indicator light is on and it is rotatng insise......but cant access it ....
How can I get Windows 8 to recognize my secondary HD? It is a WD Green 500GB SATA drive. My bios reads it, but Windows 8 does not.
View 3 Replies View RelatedThere is 3 hdd's installed to my rig:
1 is 55gb kingston ssd where i run my windows
2 is 1tb hitachi where i keep my games and other junk
3 is seagates 250gb laptop hdd.
The main problem was that sometimes when opening or just clicking some folders freezes the file explorer and it crashes after it, so i tought to format the second hdd to make it work better now it seems work ok except for moving files from hdd to another.
When copying the copy speed just at random point drops to 0% and leaves the hdd 3 to hang 100% and the hdd 2 is dropping to 0%.
What i have tried:
I ran hdd regenerator and 18 bad sectors were fixed Also tried to change sata ports That's not much but can't figure anythin else for now and i am starting to suspect that my hdd is gone bad :/ also when downloading ~100mb file from internet it makes same thing but i don't know is it same problem...
I used four drives in my hard-disk. I needed to extend volume for my C drive. So using the Disk management utility I was trying to shrink the drive F (as it was very next to C, as in Disk management). But something happen accidental here. I found that two of my drives E & F went missing after the operation. Also my laptop suddenly restarted (after perform a checking task). I am not sure how this happened and looking for a way to recover the lost partitions as they are seen still exist, including the data.
I was only trying to shrink around 283 mb of volume from a drive with 138 gb, as an experiment basis, to see it work. On that process the drives were lost and those are not shown into my windows now. Using a software EaseUS Partition Master, I could still see the drives still exist as they contain the data as used spaces, and also show the unallocated space of 283 mb but I am not finding a way how could I recover my partition without affecting the data.
I originally built my computer with two 1 TB hdd as RAID1 with Windows 8 Pro 64 Bit as the OS.
The boot files eventually became corrupted. I could not reinstall Windows 8 on the RAID 1 array. So I then purchased two 2 TB HDD and created a new RAID 1 array which Windows 8 readily loaded onto.
I then added the two original 1 TB HDD to the computed to use for photography and media storage. They also showed when booting my computer as a separate RAID 1 array, but were listed as "repair." I went into the RAID BIOS and separated the array. I connected only one of the 1 TB HDD, and the drive was the "E" Drive in my computer, but I was unable to access it. "E: is not accessible. Access is denied." Disk Management showed the drive as DISK 1, but as two partitions: System Reserved 350 MB NTFS Healthy (Active, Primary Partition) and 931.17 GB NTFS Healthy (Primary Partition). I used Diskpart to create a Primary partition and format the disk. That HDD now works fine. Unfortunately I did not backup the data on that HDD, which I would like to have.
I did try the second mirrowed 1 TB HDD on the computer before formatting the first and was able to access all of the data on the HDD.
Now after formatting the first 1 TB HDD, I added the second 1 TB HDD from the original RAID 1 array back onto the computer, wanting to retrieve the data on it. This HDD does not show on My computer and is not assigned a drive letter. However the HDD is listed in Disk Management as DISK 2 and partitioned into System Reserved 350 MB NTFS Healthy ( active, Primary Partition) and 931.17 GB NTFS Healthy (Primary Partition). Looking for retrieving the data on this disk, copying it to another HDD, and then creating one partition on this HDD? How to assign the HDD a drive letter. I would like to format this HDD after copying the data, and have my computer assign it a drive letter so that I can use it.
I have just bought a 4TB external USB 3.0 hard drive. The plan is to copy all of the data from my current internal 2TB drive to the 4TB, then I'm going to crack the case of the external hard drive open, take the drive out, and put it in my PC to replace the 2TB drive that's in there now (which I know will void the warranty). This isn't going to be a boot drive as I have an SSD for that.
I had read that Windows does not support large drives of this size and that it would show up as 2 partitions, so I was prepared to convert the drive to GPT in order to have 1 large partition. However, I connected the drive up to my Windows 8.1 machine and it shows as 1 large partition of 3.63TB, which is about what I expected.
Does this mean I don't have to convert the drive after all? Can I do what I'm planning to do and everything will work fine? Or do I need to convert it to GPT before I copy all of my data over and if so, how do I do that exactly?
I recently discovered that one of my drives has been at 100% activity with no data being read or written. This particular drive is used for virtual instruments and samples for music. I've never had issues before, but I found it odd that loading projects took an insane amount of time to load, which lead me to check the disk usage of this particular drive.
Current response time spikes into the tens of thousands. Again, nothing is being written or read. If I open the drive, I can see all my files, but the drive never seems to stop "searching". I've attatched a picture below:
I have a win2012 server with many users on it and some jerk likes to delete drives, so I need to disable disk managmeant for everyone but myself.
View 3 Replies View RelatedI just installed Win 8 last night and everything seemed fine before I turned off the computer. Now, I'm a student and I work a lot from my USB/HD. I have both my usb and HD connected to the computer but the computer doesn't read them now.
View 8 Replies View RelatedMy portable hard drive stops showing up all of a sudden. It is connected to a USB hub. When I go to 'Disk Management' in 'Computer Management', the hard drive shows up as Unknown - Not Initialised. Also this hard drive works while not using the USB hub, and the USB hub works as well with other devices.
View 9 Replies View RelatedI built my computer a couple weeks ago and am running windows 8.1. I currently have a 128gb SSD and a 1tb internal hard drive (WD Caviar Blue) I obviously used the ssd to boot windows and currently windows is detecting my 1tb hard drive but it is not usable. I have tried diskpart commands to clean and format and I keep getting the error message "DiskPart has encountered an error: The request could not be performed because of an I/O device error". The hard drive was brand new and cables are fine. This is what everything looks like..
View 4 Replies View RelatedIs there a way I can back up my files from my 2tb WD My Passport External Hard Drive? I have a lot of files on there which I want to back up and convert to NTFS.
View 5 Replies View RelatedI am having a little trouble with windows disk management. I'm running a custom built rig with a 250GB SSD for OS & Programs, and a 2TB HDD for everything else. The hard drive was previously partitioned however I recently removed these partitions and Extended the main volume to fill the drive, however it is showing up as 3 distinct volumes in disk management (See attached screenshot). They're also Green from some reason and the disk is showing as a 'Dynamic' disk, which I don't remember changing.
View 5 Replies View RelatedHP Envy dv7, Windows 8
Seagate 2TB drive mounted in a Thermaltake, Max 5 enclosure. The drive does not show in Windows 8. Does show when running Disk Management (diskmgmt.msc) but shows as "Unallocated" without a drive letter. If run the Seagate drive tools, it shows up as unallocated, with drive letter "C". But there is obviously already a drive "C".
Disk Management does not present a means by which to assign a drive letter
I have a Simpletech Simpledrive External Hard drive. It works on my desktop running xp. When I connect to my Asus N56DP Laptop, I hear the binging and all. But I do not see it in my control panel. I can see it in the device manager. Not in Disc MAnagement. Is there something I can do to get it to install and be accessible? I have some race car pictures I would like to post to Facebook.
View 1 Replies View Related