Unable to start Disk Management. I tried the following without success:
- Check file integrity
- Repair with DISM
- Start the Virtual Disk Service and Volume SHadoy Copy manually and set them to Automatic and Manual (it starts, but Disk Management cannot connect to it)
- Disable Firewall and Antivirus
- Verified that my system is malware free
- Tried opening it in Safe Mode
what is the windows virtual disk service? never heard of it before...
friend of mine on windows 8 saw it in his event log and he wants to know what it is, so..it falls to me to ask as he's not got regular internet access... that and I end up doing all his maintenance work for him somehow... *shrugs*
Is it still possible to bring a disk offline using Disk Management (diskmgmt.msc) in Windows 8 the same way it was possible in Windows 7 or is using Diskpart.exe the only way?
View 5 Replies View RelatedI originally built my computer with two 1 TB hdd as RAID1 with Windows 8 Pro 64 Bit as the OS.
The boot files eventually became corrupted. I could not reinstall Windows 8 on the RAID 1 array. So I then purchased two 2 TB HDD and created a new RAID 1 array which Windows 8 readily loaded onto.
I then added the two original 1 TB HDD to the computed to use for photography and media storage. They also showed when booting my computer as a separate RAID 1 array, but were listed as "repair." I went into the RAID BIOS and separated the array. I connected only one of the 1 TB HDD, and the drive was the "E" Drive in my computer, but I was unable to access it. "E: is not accessible. Access is denied." Disk Management showed the drive as DISK 1, but as two partitions: System Reserved 350 MB NTFS Healthy (Active, Primary Partition) and 931.17 GB NTFS Healthy (Primary Partition). I used Diskpart to create a Primary partition and format the disk. That HDD now works fine. Unfortunately I did not backup the data on that HDD, which I would like to have.
I did try the second mirrowed 1 TB HDD on the computer before formatting the first and was able to access all of the data on the HDD.
Now after formatting the first 1 TB HDD, I added the second 1 TB HDD from the original RAID 1 array back onto the computer, wanting to retrieve the data on it. This HDD does not show on My computer and is not assigned a drive letter. However the HDD is listed in Disk Management as DISK 2 and partitioned into System Reserved 350 MB NTFS Healthy ( active, Primary Partition) and 931.17 GB NTFS Healthy (Primary Partition). Looking for retrieving the data on this disk, copying it to another HDD, and then creating one partition on this HDD? How to assign the HDD a drive letter. I would like to format this HDD after copying the data, and have my computer assign it a drive letter so that I can use it.
I have a win2012 server with many users on it and some jerk likes to delete drives, so I need to disable disk managmeant for everyone but myself.
View 3 Replies View RelatedHow to post a screen capture of a full screen Disk Management window as I've done many times before. He said none were marked as Active.
I opened Disk Management (full screen) on my Windows 8.1.1 Pro X64 EFI/GPT system so I could post a screen capture showing him where it would show up.
I was very surprised when there was no Active flag shown anywhere. I know it used to show up.
What happened and when did this change occur. Must have been a Windows Update that screwed it up.
It's still there under Windows 7 on a different computer (BIOS/MBR):
After installing Windows 8 my computer had four partitions; I thought they'd be fine but want to change it to have two big ones, one for Media and one for typical C: usage. I moved everything out of D: to delete the volume so I would have free space to the right of C:, which I've read is what you need to do in order to extend partitions using Disk Management. However, the option is still greyed-out when right-clicking C: as shown:
I did this because I've read mixed things about using 3rd-party software to extend partitions; some that don't truly extend it and just trick your computer into merging the two... I like doing things the purest way possible and would like to truly combine C: with the free space to the right of it. Why the option is not available?
HP 15-d005TU
-3rd Generation Intel Core i3-3110M Processor (2.4 GHz)
-500GB Hard Drive Toshiba MQ01ABF050
-4096MB DDR3 SDRAM
-DVD Optical drive hp DVDRAM GU90N
-Windows 8.1 64bit
On delivery it had 9 Windows updates installed ( 8, dated Nov 13 and the last one dated 07 Mar 2014, perhaps just before it left the factory). My first priority was to update Windows. A total of 78 updates including the last major Windows 8.1 update 1 akin to a Service Pack - KB2919335 and all this took a lot of time. All updates went on well with no problems.
Now I find that Windows Disk Management lists two OEM recovery partitions D: ( What it was earlier, I did not notice but I presume it was showing one correctly since any abnormality would have caught my attention.)
Diskpart lists all the partitions correctly. And so also bootice. Now what is causing this and how do I fix it?
I find there is a Intel Manageability Firmware Recovery Agent - [URL] .... My own guess is some Intel driver/firmware may be causing it. As I said it is only a guess. I tried the update with it but so far Intel servers could not be reached though my internet connection is OK.
I have a laptop with Windows 8 installed in a 256Gb SSD. There's a 32Gb recovery partition whose purpose is to recover the drive to factory install. Since I already imaged this recovery partition to an external drive I would like to delete it and merge it to the main C partition to increase capacity. I know I can do this easily with 3rd party solutions (Easus, etc), but I'd like to do it using the Windows 8 built in Disk Management. I tried but when I right click on the 32Gb recovery partition the only option that shows up is "Help", it does not show any other option that shows for the other partitions (Shrink, etc).
View 9 Replies View RelatedCan I delete / merge the Recovery Partition into the EFI System Partition?
View 2 Replies View RelatedSo I've been playing around with FreeNAS on another rig, you install the server on a USB drive and run the server form the flash drive. I've decided to go another rout and not use free nas so I went to format the 2 flash drives I was messing with and there are some partitions I can't remove with disk management, and space missing.
disk 1.jpg
Disk 3 should be 4GB large but I can only find the 943 MB
disk 2.jpg
disk 3.jpg
It doesn't give me any options to change the volumes on Disk 4.
The disk management tool on my windows doesn't move on and hangs at "connecting to virtual disk service" forever:
My HP desktop is new, windows 8.1, hard drive having ample space. I searched the web and tried, but to no avail. Or where can I download a free windows disk management tool to fix the issue?
disk management won't allow me to extend empty 46GB volume.
Do I need to do an Fdisk ? or use a third party program to do this ?
Before I do this I must create a windows setup disk because I do not have one at the moment , all I have is a Dell usb Restore.
deleting the D:volume partition is easy but then Im left with empty partiton , I want to extend this to c: so that my c:418 goes back to 464gig.
Disk management won't allow me to extend empty 46GB volume. The windows disk management will not allow me to delete any partitions. Do I need to do an Fdisk ? or use a third party program to do this ?
Before I do this I must create a windows setup disk because I do not have one at the moment , all I have is a Dell usb Restore. would be good if there was a video clip of how to delete the partition.
[URL] ....
Here is the screen shot :
I have a Western Digital external hard drive. Model WD5000C032 500GB. It's an older device that was working just fine on my Mac (I don't know what OS it was running and do not have access to it any longer). I have brought this HD with me and am now trying to use it on my Windows 8.1 lap top. When I plug it in, the device is not assigned a letter. I can search for it in disk management, but it is uninitialized. I have right clicked on the drive to initialize, and receive an error message "the specific disk is not convertible because the size is less than the minimum size required for GPT disks." I searched and suggestion is downloading and using Partition Wizard. I downloaded the program and opened the wizard, but it does not see my hard drive. The screen shot will display as far as I've gotten.
View 9 Replies View RelatedI am using Dell Optiplex 3010 in my office.There are around 40 systems and all have same issue. Config is as follow
Windows 8 Genuine 64 bit
2GB DDR 3
Dell Optiplex 3010
Now the problem is there is one service Service Host: Local Network Restricted it consumes 100% disk usage and computer starts acting. I have to manually kill this process from task manager around 4-5 times to end it.
I was going to reinstalling windows on my computer and i thought put 200gb for windows 8 and and 1300gb can be for windows 7(for gaming), So i install windows 8 and shrink the hard drive size so windows 8 has 200gb. And use windows 7 for gaming but my pc is a bit s#*t and a dont do gaming any more. (only on the ps3).
So can i unshrink or something so i have 1.5tb together for windows 8?
[URL] .....
I've long been an XP user, just purchased a new desktop with 8.1 and a 2TB HDD this week.
I was partitioning some drives to organize things, and i am stuck.
On a 2TB drive, i have so far allocated 900GB over 4 drives for files, etc. [100,200,300,300]
I have 946.42GB left on my C, and i was hoping to get at least 2-3 more 200/300GB drives before leaving the remainder to C, but when i attempt to shrink my C drive, Disk Management tells me ive only got 20835MB/20GB available space to shrink. Wtf? I have literally added nothing to the computer except uTorrent, ive used Disk Optimizer to defrag the C drive 3 times, and still all of this space is unavailable? The OS has unmovable files scattered that loosely??
Have 2 hard drives (SSDs).
Drive 1 : OS Win 8.1 for general web, office and junk running
Drive 2 : OS Win 8.1 for tweaked hobby work; Audio recording etc
Whilst I wish to not physically disconnect the drives on each boot. I would like to have the alternative drive hidden and not impacted when the other drive is running for the OS.Boot up from Drive 1 this currently shows as Drive C: and the secondary drive with the OS installed as D:
Boot up from Drive 2 this currently shows as Drive C: and the secondary drive with the OS installed as D:
End aim
Boot up from Drive 1 this currently shows as Drive C: and the secondary drive with the OS installed not running or showing on the system and vice versa. Is the online offline function what I need to use or is this going to put the drive offline for the system as a whole.
The program Acronis True Image failed when attempting to clone win 8.1 C drive. The destination disk is now hidden in File Explorer but is present in Disk Management (and in Device Manager). The Disk Management command "Change Drive Letter ..." is grayed out. How can I unhide the drive?
The drive in question appears in attached screen shots as Disk 6 but is missing from Explorer.
Over the last couple days, I built a new PC and installed windows 8.1. Initially I had some issues installing windows, so I unplugged all my drives except the SSD and DVD. I installed windows to my SSD.
Everything works great!
Now I started adding my drives back in 1 at a time. When I plugged my 2nd SSD in, it showed up in BIOS, but not in Disk Management or Device Manager. So I booted back into the install CD, it showed up in the disk manager there. Since this was also a blank SSD, I partitioned and formated the drive from the install CD, then exited the installer and booted back to my windows drive.
I have 2 SSD drives working great!
Now to add my 2TB HDD... Same issue, it shows up in BIOS and the install disc, but not in Disk Management or Device Manager. This drive does not have a boot partition on it, however, it does have two existing data partitions. They were made from my previous windows 7 system and the option to delete these partitions is grayed out in the install disc menu. I also have some data that I would like to keep on it. I have a USB dock that I can use to read the contents of the disk just fine. Everything is there and in working order.
What is different about Windows 8.1 that is preventing my hard drives from showing up in windows proper? I am reading things about UEFI online, but nothing seems to fit my exact scenario. I will try and post some screen shots when I get back at it.
System:
Mobo- Asrock Fatal1ty Killer z87
CPU- i3 4330
GPU- Gigabyte 660 OC
SSDs - Kingston V300 120GB
Windows 8.1 64bit
I have read some threads other info about shrinking the c drive where the os is,but none have ever said that it cannot be shrunken using the windows provided disk management but seems to talk around it?
View 9 Replies View RelatedI just bought a new SSD and did a fresh install of windows going from Windows 7 to 8.1.
I simply took out my old SSD and put in the new one, and installed windows 8.1 pro from a USB stick onto the new ssd.
2 existing HDDs were left on there, I'm also replacing them but I want to format them first to remove all data.
Disk 1 is the new SSD that windows was installed on. It is "Healthy (Boot, Page File, Active, Crash Drump, Primary Partition)"
Disk 2 is the drive I want to reformat and replace, it is "Health (System, Primary Partition)"
How do I make the C drive (Disk 1) the System disk?
I have backed up all the files I want to keep onto an external hdd.
on my computer with windows 8 format as I am. Dvd format to format I've installed disk, but I erased or something during the installation, format the error output. The computer BEGAN to GIVE the following ERROR :
GIVEN WARNING
Error: no boot disk has been detected or the disk has failed.
</b>
<img class="decoded" alt="http://i.hizliresim.com/W2jNzN.jpg" src="http://i.hizliresim.com/W2jNzN.jpg" />
I'm running windows 8 on a partition so I use it mostly for gaming. I have 115 GB on the partition, and when I totaled all the files in my Bootcamp drive it comes to a total of about 80 GB, 50 from games, 20 from the OS. However, I'm constantly getting error messages saying that my disk is almost full and that 105 gigabytes have been used. I've tried CCleaner and disk cleanup but nothing big is found. So why would it be using space greater than what can be seen in the disk when using explorer and is there any way to fix this error (if it is one)?
View 5 Replies View RelatedMy hard disk crashed. I have a recovery cd created on the time of purchase. I bought a new hard disk for this purpose. Now when I am trying to recover from the same cd it is getting stuck at 40 % showing error. I searched for this error and got something as such recovery disk can work on OEM hd. As my old hd has crashed how can I recover over there. Is there any system that dell provide me with necessary operating system so that atleast I can use my system.
View 7 Replies View RelatedI tried to put my computer in safe mode through system configuration and when I rebooted the computer will not start. It simply does nothing, I hear the HD start to work and the light flashes but nothing, it doesn't show anything on the monitor. I do not have a system restore disk either.
View 5 Replies View RelatedI tried to make partitions on my hard disk and then tried to reboot the system, but it fails to reboot, error 0xc0000225 (winloader) on blue screen. BIOS sees the harddisk. I can also load the recovery program (hp), but it provides me only 1 option - to make system recovery to factory settings and losing all I have on my hard disk. Can it be somehow possible to recover win 8 and start it without factory settings recovery and losing files?
View 9 Replies View Relatedso a few years ago i bought this pc and as Always i make 2 partitions one for backup and the other for windows and all the other stuff.
So today i wanted to reinstall windows because the Disk 0 partition fitness was 0% and randomly freezing. as my other half was like 70-80% fitness (rated by Speedfan). But this never happened to me, usually Partition C and D Always were on the same "disk #" and now they are separated and i just cant get them back.
now i want to put them back together and make one whole HDD, any way to get them back to eachother?
with this ill add some pictures, since a picture says more than 1000 words.And Edit, maybe usefull. i've noticed my partitions turned into 2 different "bus numbers" Bus number 0 and bus number 1
I installed Windows 8 with the program PWBOOT in USB disk drive and some of the apps in the metro Start Screen they didn't installed. Also the Windows store app is missing so I can't download the apps from the Windows 8 store. What should I do to bring em there? I also have a Windows 8 disc. Can I write em without deleting all the third party desktop apps? If so then how?
View 5 Replies View RelatedWhen i convert the disk says that the disk needs to be formatted.Does that format everything or only not the windows files (so the vital-to-run files )??
View 3 Replies View Related