disk management won't allow me to extend empty 46GB volume.
Do I need to do an Fdisk ? or use a third party program to do this ?
Before I do this I must create a windows setup disk because I do not have one at the moment , all I have is a Dell usb Restore.
deleting the D:volume partition is easy but then Im left with empty partiton , I want to extend this to c: so that my c:418 goes back to 464gig.
Disk management won't allow me to extend empty 46GB volume. The windows disk management will not allow me to delete any partitions. Do I need to do an Fdisk ? or use a third party program to do this ?
Before I do this I must create a windows setup disk because I do not have one at the moment , all I have is a Dell usb Restore. would be good if there was a video clip of how to delete the partition.
[URL] ....
Here is the screen shot :
After installing Windows 8 my computer had four partitions; I thought they'd be fine but want to change it to have two big ones, one for Media and one for typical C: usage. I moved everything out of D: to delete the volume so I would have free space to the right of C:, which I've read is what you need to do in order to extend partitions using Disk Management. However, the option is still greyed-out when right-clicking C: as shown:
I did this because I've read mixed things about using 3rd-party software to extend partitions; some that don't truly extend it and just trick your computer into merging the two... I like doing things the purest way possible and would like to truly combine C: with the free space to the right of it. Why the option is not available?
I have Windows 8.1 x64, I have a 1TB drive attached on USB 3.0 port, the disk has four partitions, two are not allocated, I am trying to extend the volume on one of the active partitions, a Healthy, Primary partition but I get a message "The operation you selected will turn the selected disk(s) to Dynamic disk(s).
I'm not sure what it means but how do I get the extended volume to be a Basic volume?
Unable to start Disk Management. I tried the following without success:
- Check file integrity
- Repair with DISM
- Start the Virtual Disk Service and Volume SHadoy Copy manually and set them to Automatic and Manual (it starts, but Disk Management cannot connect to it)
- Disable Firewall and Antivirus
- Verified that my system is malware free
- Tried opening it in Safe Mode
Is it still possible to bring a disk offline using Disk Management (diskmgmt.msc) in Windows 8 the same way it was possible in Windows 7 or is using Diskpart.exe the only way?
View 5 Replies View RelatedI originally built my computer with two 1 TB hdd as RAID1 with Windows 8 Pro 64 Bit as the OS.
The boot files eventually became corrupted. I could not reinstall Windows 8 on the RAID 1 array. So I then purchased two 2 TB HDD and created a new RAID 1 array which Windows 8 readily loaded onto.
I then added the two original 1 TB HDD to the computed to use for photography and media storage. They also showed when booting my computer as a separate RAID 1 array, but were listed as "repair." I went into the RAID BIOS and separated the array. I connected only one of the 1 TB HDD, and the drive was the "E" Drive in my computer, but I was unable to access it. "E: is not accessible. Access is denied." Disk Management showed the drive as DISK 1, but as two partitions: System Reserved 350 MB NTFS Healthy (Active, Primary Partition) and 931.17 GB NTFS Healthy (Primary Partition). I used Diskpart to create a Primary partition and format the disk. That HDD now works fine. Unfortunately I did not backup the data on that HDD, which I would like to have.
I did try the second mirrowed 1 TB HDD on the computer before formatting the first and was able to access all of the data on the HDD.
Now after formatting the first 1 TB HDD, I added the second 1 TB HDD from the original RAID 1 array back onto the computer, wanting to retrieve the data on it. This HDD does not show on My computer and is not assigned a drive letter. However the HDD is listed in Disk Management as DISK 2 and partitioned into System Reserved 350 MB NTFS Healthy ( active, Primary Partition) and 931.17 GB NTFS Healthy (Primary Partition). Looking for retrieving the data on this disk, copying it to another HDD, and then creating one partition on this HDD? How to assign the HDD a drive letter. I would like to format this HDD after copying the data, and have my computer assign it a drive letter so that I can use it.
I have a win2012 server with many users on it and some jerk likes to delete drives, so I need to disable disk managmeant for everyone but myself.
View 3 Replies View RelatedI have created two disk images. I deleted the first one but in the restore point pop up the title is still here (but is empty!!! The red one.) How can delete it????
View 3 Replies View RelatedHow to post a screen capture of a full screen Disk Management window as I've done many times before. He said none were marked as Active.
I opened Disk Management (full screen) on my Windows 8.1.1 Pro X64 EFI/GPT system so I could post a screen capture showing him where it would show up.
I was very surprised when there was no Active flag shown anywhere. I know it used to show up.
What happened and when did this change occur. Must have been a Windows Update that screwed it up.
It's still there under Windows 7 on a different computer (BIOS/MBR):
HP 15-d005TU
-3rd Generation Intel Core i3-3110M Processor (2.4 GHz)
-500GB Hard Drive Toshiba MQ01ABF050
-4096MB DDR3 SDRAM
-DVD Optical drive hp DVDRAM GU90N
-Windows 8.1 64bit
On delivery it had 9 Windows updates installed ( 8, dated Nov 13 and the last one dated 07 Mar 2014, perhaps just before it left the factory). My first priority was to update Windows. A total of 78 updates including the last major Windows 8.1 update 1 akin to a Service Pack - KB2919335 and all this took a lot of time. All updates went on well with no problems.
Now I find that Windows Disk Management lists two OEM recovery partitions D: ( What it was earlier, I did not notice but I presume it was showing one correctly since any abnormality would have caught my attention.)
Diskpart lists all the partitions correctly. And so also bootice. Now what is causing this and how do I fix it?
I find there is a Intel Manageability Firmware Recovery Agent - [URL] .... My own guess is some Intel driver/firmware may be causing it. As I said it is only a guess. I tried the update with it but so far Intel servers could not be reached though my internet connection is OK.
I have a laptop with Windows 8 installed in a 256Gb SSD. There's a 32Gb recovery partition whose purpose is to recover the drive to factory install. Since I already imaged this recovery partition to an external drive I would like to delete it and merge it to the main C partition to increase capacity. I know I can do this easily with 3rd party solutions (Easus, etc), but I'd like to do it using the Windows 8 built in Disk Management. I tried but when I right click on the 32Gb recovery partition the only option that shows up is "Help", it does not show any other option that shows for the other partitions (Shrink, etc).
View 9 Replies View RelatedCan I delete / merge the Recovery Partition into the EFI System Partition?
View 2 Replies View RelatedSo I've been playing around with FreeNAS on another rig, you install the server on a USB drive and run the server form the flash drive. I've decided to go another rout and not use free nas so I went to format the 2 flash drives I was messing with and there are some partitions I can't remove with disk management, and space missing.
disk 1.jpg
Disk 3 should be 4GB large but I can only find the 943 MB
disk 2.jpg
disk 3.jpg
It doesn't give me any options to change the volumes on Disk 4.
The disk management tool on my windows doesn't move on and hangs at "connecting to virtual disk service" forever:
My HP desktop is new, windows 8.1, hard drive having ample space. I searched the web and tried, but to no avail. Or where can I download a free windows disk management tool to fix the issue?
I have a Western Digital external hard drive. Model WD5000C032 500GB. It's an older device that was working just fine on my Mac (I don't know what OS it was running and do not have access to it any longer). I have brought this HD with me and am now trying to use it on my Windows 8.1 lap top. When I plug it in, the device is not assigned a letter. I can search for it in disk management, but it is uninitialized. I have right clicked on the drive to initialize, and receive an error message "the specific disk is not convertible because the size is less than the minimum size required for GPT disks." I searched and suggestion is downloading and using Partition Wizard. I downloaded the program and opened the wizard, but it does not see my hard drive. The screen shot will display as far as I've gotten.
View 9 Replies View RelatedI was going to reinstalling windows on my computer and i thought put 200gb for windows 8 and and 1300gb can be for windows 7(for gaming), So i install windows 8 and shrink the hard drive size so windows 8 has 200gb. And use windows 7 for gaming but my pc is a bit s#*t and a dont do gaming any more. (only on the ps3).
So can i unshrink or something so i have 1.5tb together for windows 8?
[URL] .....
I've long been an XP user, just purchased a new desktop with 8.1 and a 2TB HDD this week.
I was partitioning some drives to organize things, and i am stuck.
On a 2TB drive, i have so far allocated 900GB over 4 drives for files, etc. [100,200,300,300]
I have 946.42GB left on my C, and i was hoping to get at least 2-3 more 200/300GB drives before leaving the remainder to C, but when i attempt to shrink my C drive, Disk Management tells me ive only got 20835MB/20GB available space to shrink. Wtf? I have literally added nothing to the computer except uTorrent, ive used Disk Optimizer to defrag the C drive 3 times, and still all of this space is unavailable? The OS has unmovable files scattered that loosely??
Have 2 hard drives (SSDs).
Drive 1 : OS Win 8.1 for general web, office and junk running
Drive 2 : OS Win 8.1 for tweaked hobby work; Audio recording etc
Whilst I wish to not physically disconnect the drives on each boot. I would like to have the alternative drive hidden and not impacted when the other drive is running for the OS.Boot up from Drive 1 this currently shows as Drive C: and the secondary drive with the OS installed as D:
Boot up from Drive 2 this currently shows as Drive C: and the secondary drive with the OS installed as D:
End aim
Boot up from Drive 1 this currently shows as Drive C: and the secondary drive with the OS installed not running or showing on the system and vice versa. Is the online offline function what I need to use or is this going to put the drive offline for the system as a whole.
In my Windows 8 laptop, I have a C-drive of 421gb in which 358gb is free. As I tried to partition another disk of 300gb It was not allowing me that in shrink volume. It is allowing only 25gb to divide. What to do???
View 5 Replies View RelatedThe program Acronis True Image failed when attempting to clone win 8.1 C drive. The destination disk is now hidden in File Explorer but is present in Disk Management (and in Device Manager). The Disk Management command "Change Drive Letter ..." is grayed out. How can I unhide the drive?
The drive in question appears in attached screen shots as Disk 6 but is missing from Explorer.
Over the last couple days, I built a new PC and installed windows 8.1. Initially I had some issues installing windows, so I unplugged all my drives except the SSD and DVD. I installed windows to my SSD.
Everything works great!
Now I started adding my drives back in 1 at a time. When I plugged my 2nd SSD in, it showed up in BIOS, but not in Disk Management or Device Manager. So I booted back into the install CD, it showed up in the disk manager there. Since this was also a blank SSD, I partitioned and formated the drive from the install CD, then exited the installer and booted back to my windows drive.
I have 2 SSD drives working great!
Now to add my 2TB HDD... Same issue, it shows up in BIOS and the install disc, but not in Disk Management or Device Manager. This drive does not have a boot partition on it, however, it does have two existing data partitions. They were made from my previous windows 7 system and the option to delete these partitions is grayed out in the install disc menu. I also have some data that I would like to keep on it. I have a USB dock that I can use to read the contents of the disk just fine. Everything is there and in working order.
What is different about Windows 8.1 that is preventing my hard drives from showing up in windows proper? I am reading things about UEFI online, but nothing seems to fit my exact scenario. I will try and post some screen shots when I get back at it.
System:
Mobo- Asrock Fatal1ty Killer z87
CPU- i3 4330
GPU- Gigabyte 660 OC
SSDs - Kingston V300 120GB
Windows 8.1 64bit
I have read some threads other info about shrinking the c drive where the os is,but none have ever said that it cannot be shrunken using the windows provided disk management but seems to talk around it?
View 9 Replies View RelatedI just bought a new SSD and did a fresh install of windows going from Windows 7 to 8.1.
I simply took out my old SSD and put in the new one, and installed windows 8.1 pro from a USB stick onto the new ssd.
2 existing HDDs were left on there, I'm also replacing them but I want to format them first to remove all data.
Disk 1 is the new SSD that windows was installed on. It is "Healthy (Boot, Page File, Active, Crash Drump, Primary Partition)"
Disk 2 is the drive I want to reformat and replace, it is "Health (System, Primary Partition)"
How do I make the C drive (Disk 1) the System disk?
I have backed up all the files I want to keep onto an external hdd.
I'm using a Logitech 35 headset on Windows 8.1 64-bit and all drivers are updated but when i want to adjust the volume, the volume mixer becomes unresponsive and stops working and my headset stops receiving sounds.
View 3 Replies View RelatedI have something to ask about my partition problem here :
That's my partition list, and I want to extend Unallocated drive (that I recently used for Ubuntu) to drive C or D, but I can't do that because I can't click "Extend Volume" at drive D.
What I supposed to do ?
I'm trying to extend my desktop screen on my TV. I have my laptop connected through an HDMI cable to the TV. When I choose extend desktop, nothing is shown on the TV. The TV is blank. Windows does detect the TV screen because both displays show up in the "Screen resolution" dialog. The TV also indicates that it has a signal.
The screen has been extended because when I move the mouse to edge of the screen, instead of stopping, it keeps going. When I drag a window, it does not stop at the edge but it keeps going. However, neither the mouse or the window is shown on the TV. Of course, I can move the mouse and window back to the laptop.
I have a Dell Inspiron laptop, Windows 8.1, Intel Core i3-4010u, 6GB RAM, Integrated Intel HD graphics. I have Sceptre X325BV-FMDR TV. Not sure if this is an issue with my TV or laptop.
I have a Windows 8 system on a SSD with about 200gb free on the left of the C: partition (left over from previous OS I dual booted). The ssd is gpt partitioned and boots using EFI.
I tried moving the partition to the left using Gparted which worked but windows wouldnt boot. I tried recreating the bcd files with no success. After doing some research I was lead to believe it was due to keys under HKLMSystemMountedDevices having the partition offset hardcoded as it would start to boot windows then crash with an error saying boot device inaccessible.
I got it booting again by moving the partition back to the correct position and recreating the bcd files again.
So are there any guides or tools that can move the partition to the left and update the relevant areas of windows so that it can boot? Or extend the partition to the left without breaking it?
I am trying to extend the taskbar to my 2nd monitor on Windows 8.1
I tried to use the tutorial on this site but I don't have any of those options. This is what it looks like for me:
Is there any other way?
PS - If it makes a difference: Primary computer resolution: 3200 x 1800 2nd monitor: 1920 x 1200
Just upgraded to 8.1. Now, it won't let me extend my desktop to a second display like I had with 8.0 ....
View 9 Replies View RelatedAfter installing Windows 8 on my main partition C, it is getting nearly full. So, I just have tried to merge some free space from Partition F in Disk Management. But, that doesn't work. Some people tell me that is because the free space is not adjacent to my C partition. I don't know whether it is right. I simply want to extend my C partition successfully.
View 6 Replies View Related
