I have something to ask about my partition problem here :
That's my partition list, and I want to extend Unallocated drive (that I recently used for Ubuntu) to drive C or D, but I can't do that because I can't click "Extend Volume" at drive D.
What I supposed to do ?
I have some unallocated space to the left of my c: drive, I have googled the issue and tried what I learned to reallocate it to my primary to no avail. I know it's just 300mb, but i would still like to recover that space if I can.
I have added a screenshot of what it looks like:
My C: is a SSD Id like to have back as one disc, one partition..
The 101 mb 'unallocated' It was previously listed as " reserved system protected drive" I removed and formatted its 101 mb...back to empty, unallocated, can I lose that partition??
It shows up under disc management as a part of c...but really has no drive letter at all it just shows as C:
OK, long story short. I did a clean install to Windows 8 Pro 64. Because of the System Reserved partition, it showed both Win 7 and Win 8 available and would prompt to do a dual boot. I cleaned it up by following the instructions on the below link.
Dual Boot - Delete a OS - Windows 7 Forums
It now no longer dual boots, and Windows 8 is fine. The only issue remaining is that my primary drive in drive management still has unallocated space. Disk 0 has 351MB Unallocated space, and 465GB of system boot, page file, etc...
In the instructions, it says to "Right click on the partition that contains the OS you want to delete and Delete Volume. Then right click on the deleted volume and Delete Partition. Now you should have "Freespace" where this partition originally was."
Well, I can't do that. When I right-click on the unallocated space, all I can do is: New Simple Volume, Properties. Everything else is greyed out. I also can't extend the other partition, the "extend" option is also greyed out.
I'm now on Win 8... How to put that 351MB onto the main partition?
I have Windows 8.1 x64, I have a 1TB drive attached on USB 3.0 port, the disk has four partitions, two are not allocated, I am trying to extend the volume on one of the active partitions, a Healthy, Primary partition but I get a message "The operation you selected will turn the selected disk(s) to Dynamic disk(s).
I'm not sure what it means but how do I get the extended volume to be a Basic volume?
I have a 1TB backup HDD that is dynamic and full. I have a new HDD that I wish to use to extend this drive.
Is there a way to do this?
I just looked at the disk manager, and I see this:
I am not sure what those 19 gb are.. and is there a way to get them back ? If I right click on it only gives me an option to delete..
I was recently experimenting with partitions and i had to assign 50 GB of disk space to a partition. Sadly, I noticed that after I deleted it I can't add it back to my main hard drive's space. How I can do this so I have all my disk space again?
View 5 Replies View RelatedI would like to ask what is OEM, EFI and unallocated partitions?How can i merge unallocated partitions into primary one???Another question is when my alienware restart , I just see my alienware Logo, cant enter to BIOS ??Computer logins smoothly just cant seem to enter BIOS.I will attatch an image of my disk management.
View 1 Replies View RelatedI have 16GB of unallocated space in front of System Reserved. I was wondering if there is a way to move the System Reserved to the front. I've used GParted before and I'm guessing I am going to have to make a backup of the C drive and then move it around. (and I know, only 10MB free on C drive. )
View 1 Replies View Relatedi've just formatted my HDD partition where os was. After that I've also deleted the respective partition and now I can not do anything to install the os in that partition, the partition now is unallocated space. I was using Windows 8.1 before all this mess.
View 9 Replies View RelatedI'm trying to extend my desktop screen on my TV. I have my laptop connected through an HDMI cable to the TV. When I choose extend desktop, nothing is shown on the TV. The TV is blank. Windows does detect the TV screen because both displays show up in the "Screen resolution" dialog. The TV also indicates that it has a signal.
The screen has been extended because when I move the mouse to edge of the screen, instead of stopping, it keeps going. When I drag a window, it does not stop at the edge but it keeps going. However, neither the mouse or the window is shown on the TV. Of course, I can move the mouse and window back to the laptop.
I have a Dell Inspiron laptop, Windows 8.1, Intel Core i3-4010u, 6GB RAM, Integrated Intel HD graphics. I have Sceptre X325BV-FMDR TV. Not sure if this is an issue with my TV or laptop.
I have a Windows 8 system on a SSD with about 200gb free on the left of the C: partition (left over from previous OS I dual booted). The ssd is gpt partitioned and boots using EFI.
I tried moving the partition to the left using Gparted which worked but windows wouldnt boot. I tried recreating the bcd files with no success. After doing some research I was lead to believe it was due to keys under HKLMSystemMountedDevices having the partition offset hardcoded as it would start to boot windows then crash with an error saying boot device inaccessible.
I got it booting again by moving the partition back to the correct position and recreating the bcd files again.
So are there any guides or tools that can move the partition to the left and update the relevant areas of windows so that it can boot? Or extend the partition to the left without breaking it?
I am trying to extend the taskbar to my 2nd monitor on Windows 8.1
I tried to use the tutorial on this site but I don't have any of those options. This is what it looks like for me:
Is there any other way?
PS - If it makes a difference: Primary computer resolution: 3200 x 1800 2nd monitor: 1920 x 1200
Just upgraded to 8.1. Now, it won't let me extend my desktop to a second display like I had with 8.0 ....
View 9 Replies View RelatedAfter installing Windows 8 my computer had four partitions; I thought they'd be fine but want to change it to have two big ones, one for Media and one for typical C: usage. I moved everything out of D: to delete the volume so I would have free space to the right of C:, which I've read is what you need to do in order to extend partitions using Disk Management. However, the option is still greyed-out when right-clicking C: as shown:
I did this because I've read mixed things about using 3rd-party software to extend partitions; some that don't truly extend it and just trick your computer into merging the two... I like doing things the purest way possible and would like to truly combine C: with the free space to the right of it. Why the option is not available?
After installing Windows 8 on my main partition C, it is getting nearly full. So, I just have tried to merge some free space from Partition F in Disk Management. But, that doesn't work. Some people tell me that is because the free space is not adjacent to my C partition. I don't know whether it is right. I simply want to extend my C partition successfully.
View 6 Replies View RelatedCurrently "restored" my PC to factory settings, now currently i am UNABLE to allocate unused HDD space back into (C
View 9 Replies View RelatedNew Laptop - I successfully resized, partition 600gb to 500gb --- 100gb unallocated space as i thought Iwill dual boot (8 MONTHS Ago).
Decided dont want to - Want to know EXTEND unallocated space - But CANT
I easily shrinked it but cant extend it. When right clicking the "extend" is faded out and i cant click it.
No luck with Esus partion manager ...
disk management won't allow me to extend empty 46GB volume.
Do I need to do an Fdisk ? or use a third party program to do this ?
Before I do this I must create a windows setup disk because I do not have one at the moment , all I have is a Dell usb Restore.
deleting the D:volume partition is easy but then Im left with empty partiton , I want to extend this to c: so that my c:418 goes back to 464gig.
Disk management won't allow me to extend empty 46GB volume. The windows disk management will not allow me to delete any partitions. Do I need to do an Fdisk ? or use a third party program to do this ?
Before I do this I must create a windows setup disk because I do not have one at the moment , all I have is a Dell usb Restore. would be good if there was a video clip of how to delete the partition.
[URL] ....
Here is the screen shot :
I'm using Windows 8.1pro,also I use HDMI to sometime output video files on a TV screen,that works fine. HDMI cable is always plugged in,primary display is set to my computer monitor.I don't always use TV screen and because of existing cable connection my OS extends image to second screen and my mouse cursor alway disappear when it goes to borders,that is an annoying situation,is there a way to disable/eanble extend display on second screen without unplug the cable,just like I can set default output sound device (computer/hdmi sound) ?
View 3 Replies View RelatedI have 2 Devolo AV 200 Smart, 2 Devolo 200, 1 TP-Link 300 Mbps Wi-Fi Range Extender being fed from a TP-Link N600 ADSL2 Modem Router. All great working together. Recently my wife got, (from the Amazon Vine program), Sagemcom F@ST plug, 501P/502W. Can I mix the different make's to extend the Wi-Fi and LAN coverage throughout my house? I might need to get some more, Homeplugs, at a later date, when the decorating is finished in the other rooms. The Sagemcom plugs, apparently, are paired to each other at manufacture, no setup required and they will associate automatically with each other once plugged into the ring circuit. Will the Sagemcom associate with the Devolo's?
View 1 Replies View RelatedI'm booting off my SSD which is drive C: and I have games and programs on an extra hard drive which was origanally drive H: but after a restart it switched to I: and when I go into Disk Management to change it Drive H: isn't there.
View 3 Replies View RelatedI have a 2TB Western Digital My Book Essentials, it's filled with tons of old photos, movies, docs, games, and I'm scared to think of what else. The SATA to USB connector broke on it, so I took the drive apart and put it inside my computer. I opened up device manager because it wasn't showing up automatically and the 2TB is showing up as unallocated, I'm freaking out now because I'm scared the data was somehow deleted.What do I do?
edit: I realize also this isn't directly related to Windows 8 (besides the fact it's the OS I'm on), but I don't know where else to post it. I'd also like to say that I had a really deep feeling the drive was going to break continually for about two weeks before it happened, so if you have a similar feeling about something, don't ignore it!
When I go to Computer Management my main (OS) drive shows as "Disk 1" and my 2nd internal data drive shows as "Disk 0". Should I switch the SATA cables so that the main drive will show as "Disk 0 and the 2nd internal drive as "Disk 1"?
View 5 Replies View RelatedI have just bought an AIO Asus desktop with 1 Tb of storage. The c: (Windows)drive is allocated 100gb and the d: drive 931gb. I just want to transfer all the data from my old computer. This was pretty much all in the folder c:>Users>Myname, but when I try to transfer it all into the same folder on the new computer, obviously with 100gb there is not enough space.
View 2 Replies View RelatedCan you save to hard drive and One Drive at Same Time?
View 2 Replies View RelatedI have a laptop that has an SSD with Win 8.1 + programs, and an HDD for projects. They are both formatted GPT. When I launch Macrium, for some reason my SSD is now GPT 1 and the second drive is now GPT 2. This is confusing because I'm used to imaging the top line of partitions which is usually my OS. Now that the GPT numbers are reversed, I have to be careful when doing my backups. How to change this assignment so that the SSD will be GPT1 again?
View 9 Replies View RelatedI'm in the process of moving to an SSD and need to create a backup drive in order to repair the BIOS after transferring everything. However, when I try to create one - the create a recovery drive program won't recognize the flash drive I have connected as a flash drive.
I first tried with a SanDisk Cruzer which apparently had a quirk in that it shows up as a hard drive instead of removable flash drive. That seems to be well documented on forums all over the place and there is no fix.
So, I purchased a cheap 8 GB stick (no brand) and Windows (I'm running 8.1 x64) recognizes it as a removable disk. However, the create a backup utility still won't recognize it. I've found some random fixes that have worked for some (such as plugging it into a different USB port) but nothing has worked for me so far. I've tried doing it with the "copy the recovery partition" option both checked and unchecked.
If there's no solution to this wonderful "quirk" of Windows, then is there something else I can do to repair BIOS? Seems like there's not a fix to my problem out there...
EDIT So as of right now, I tried using HPs recovery software which seems to do the same thing as copying over your entire recovery partition. That didn't work either. However..when I had both USB sticks plugged in the Windows supplied utility recognized the SanDisk Cruzer when I checked the "copy the partition" thing
Windows 8.1
pc bought in 2013 with windows 8 bundled (so no installation DVDs, no activation key communicated).
upgraded to windows 8.1 in 2013.
I made a recovery USB (system image) on 1st April 2014.
If I need to boot on this USB, my PC will be again exactly as it was on 1st April 2014?