My C: is a SSD Id like to have back as one disc, one partition..
The 101 mb 'unallocated' It was previously listed as " reserved system protected drive" I removed and formatted its 101 mb...back to empty, unallocated, can I lose that partition??
It shows up under disc management as a part of c...but really has no drive letter at all it just shows as C:
My windows 8 partition is inaccessible. Win 8 won't boot, even after attempted repair and running chkdsk.
This all happened after an automatic update.
I booted to another drive. Windows explorer shows the bad partition letter but no size or contents. Other partitions on the same drive are ok.
I also can see the bad drive contents from a cmd prompt.
I'm just going through the process of personalizing a new Inspiron 14z with Windows 8. The one thing that has me stumped are all the partitions that ship installed on the drive, due to a combination of everything being different on Win8, Dell doing things their own way, and GPT formatting. Generally I would like to know what the heck all those partitions are for, but it's fine if that will be a slow learning process. Specifically and immediately, I need to change the drive letter assigned to the "WINRETOOLS" partition. Currently it's D:, and the problem is that for 10 years I've been using D: as my data partition, and quite a number of applications, configurations, settings, etc. assume that all my files are on D:. For instance, by having all my music on D:, I can sync iTunes library and preference files between machines, and all ratings and playlists match from one machine to the next. Same thing for my photos. Same thing for a bunch of utilities like FTP consoles, sync utilities...
In a prior version of Windows, I would just go into Disk Management, right click the partition in question, assign a different drive letter, and job done. On my machine, the 2GB WINRETOOL partition doesn't even show as having a drive letter in Disk Management, despite the fact that it's D: in Win Explorer. Additionally, the only right click option is "help". I've taken that option, and, despite its aspirations, it's not useful.
How can I change that drive letter to something else? Should WINRETOOLS even have a drive letter in Explorer (some posts I've seen indicate that it should be hidden)? If I do manage to change the drive letter, will that break its function, whatever that is?
My machine has a 500GB spinning disk, which has all the aforementioned partitions. I've shrunk the C: partition to 80GB, in preparation for creating a data partition. I have not yet formatted the unassigned space as I would like to solve this WINRETOOLS thing first. Finally, there is a 32GB SSD that I've set up as an Intel Smart Response cache, and it's no longer visible to the OS.
I'm booting off my SSD which is drive C: and I have games and programs on an extra hard drive which was origanally drive H: but after a restart it switched to I: and when I go into Disk Management to change it Drive H: isn't there.
View 3 Replies View RelatedWhen I put my usb in my pc I see on my Computer a new drive letter H:
So now I have: C: D: E:
Floppy: A: and my DVD as F: and a Removeable disk I: but I don't have a any removeable disk on any usb port in my pc.
When I put now my other usb it's assigining it as drive H:
But I need it to be G: since I need to save to it something from a program I saved before and it must be G: not H:
How can I change/force it to be drive letter G: instead H: ?
I have a windows to go installation in a large external hdd, so I have made a second partition to use as data storage.
Now, when I insert the disk on my "normal" windows installation I would expect the data partition to be available... Instead I have to assign a letter to be able to use it.
The disk appears to be online and once assigned a letter you can unplug it and plug it again without having to do the letter assignment again.
BUT, every time I restart the pc I have to do it all over again.
This morning, my laptop wouldn't boot and I got a message saying I needed to use the recovery disk to fix the problem. A little investigating using the command prompt from that disk revealed my system and data partitions had no drive letter assigned to them. A little work with Diskpart fixed that but left me wondering what would have caused them to disappear.
View 1 Replies View RelatedThat is, I can allocate it one through drive management but it still doesn't show next switch on in My Computer, so I must go in an allocate it one. Otherwise it works fine. Bit tedious after a while.
Do I have to reformat it completely to regain auto allocation of a letter?
Used to be fine, but not now. A USB 3.0 Toshiba 500 gig external drive (sealed unit) doesn't have this problem.
After last "patch-tuesday" my Windows 8.1 don't assign drive letters to hotswaped HDD's and USB keys.
When starting my backupdrive (eSATA), it is now without a drive letter, I can give it one though in disk-management, but before last tuesday, it was given a letter automatic. Same problem when I connect an USB-HDD or an USB-stick.
Is there a way to get back "autoassign of a drive letter"? (don't know the correct word for this function in English).
I just looked at the disk manager, and I see this:
I am not sure what those 19 gb are.. and is there a way to get them back ? If I right click on it only gives me an option to delete..
He has a DELL XPS machine, an i7 newer model running 8.1, he's got a main internal HD as C: and a permanently added USB drive with 3 partitions ad D: E: and F: but on reboot the F: partition suddenly goes up a letter to G:, the other two stay the same.
Apparently its been fine until recently when this started happening, I made sure the used Disk Management to change the letter back but on reboot its back to G:
He has no other devices attached and any other USB drives either have a selected letter near the end of the alphabet or are not assigned a set letter but none are attached when the machine boots. It sounds like the F: is being reserved by something, possibly registry wise but I don't have the machine in front of me to check and I would rather its me using regedit and he's got slippery fingers due to arthritis and is prone to over clicking and wrong key presses.
where to check or what to check, I've done as much as I can via Skype but at a loss as to why its only doing it to one partition and always the same one, also did a dischk and the partiton is ok.
I have something to ask about my partition problem here :
That's my partition list, and I want to extend Unallocated drive (that I recently used for Ubuntu) to drive C or D, but I can't do that because I can't click "Extend Volume" at drive D.
What I supposed to do ?
I have some unallocated space to the left of my c: drive, I have googled the issue and tried what I learned to reallocate it to my primary to no avail. I know it's just 300mb, but i would still like to recover that space if I can.
I have added a screenshot of what it looks like:
OK, long story short. I did a clean install to Windows 8 Pro 64. Because of the System Reserved partition, it showed both Win 7 and Win 8 available and would prompt to do a dual boot. I cleaned it up by following the instructions on the below link.
Dual Boot - Delete a OS - Windows 7 Forums
It now no longer dual boots, and Windows 8 is fine. The only issue remaining is that my primary drive in drive management still has unallocated space. Disk 0 has 351MB Unallocated space, and 465GB of system boot, page file, etc...
In the instructions, it says to "Right click on the partition that contains the OS you want to delete and Delete Volume. Then right click on the deleted volume and Delete Partition. Now you should have "Freespace" where this partition originally was."
Well, I can't do that. When I right-click on the unallocated space, all I can do is: New Simple Volume, Properties. Everything else is greyed out. I also can't extend the other partition, the "extend" option is also greyed out.
I'm now on Win 8... How to put that 351MB onto the main partition?
i've just formatted my HDD partition where os was. After that I've also deleted the respective partition and now I can not do anything to install the os in that partition, the partition now is unallocated space. I was using Windows 8.1 before all this mess.
View 9 Replies View RelatedI want to partition my C Drive to install Ubuntu 14.04 so I can dual-boot with Windows 8.1. When I tried to shrink the volume it wouldn't let me got higher than 4GB even though its a 500GB drive and I have over 259GB free. From looking at it the drive seems to have a few recovery partitions one being just under 24GB. Does the number of drive partitions factor into the amount of space I can give to a partition. Also if the recovery partitions are factoring into this can I move them to another drive or just outright delete them.
View 9 Replies View RelatedI have a USB hard drive which has two partitions:
1 x 100GB partition formatted as FAT32
1 x 900GB partition formatted as NTFS
(these sizes aren't perfectly correct, but it's a 1TB drive that's split in 1:9 proportions)
On my Windows 7 laptop, both partitions are visible in My Computer, and I can read/write with no problems. (On the same laptop, an Ubuntu install can also see and use them perfectly)
On my new Windows 8 laptop, the 100GB FAT32 patition appears under My Computer normally, but the 900GB NTFS partition does not. If I go to Computer -> Manage -> Disk Management, I can see the partition. It has no drive letter or file system listed, reports as "healthy, primary partition" and shows 100% free space. If I right click on the drive's entry in the list, my only options are "delete partition"; everything else is greyed out.
So, to summarise: One hard drive with two partitions. Both partitions work perfectly in Win 7 and Ubuntu. Win 8 can only see the FAT32 partition, and treats the NTFS partition as if it is junk.
way to persuade Windows 8 to mount this partition? I know that the drive and partition are fine, but for some reason Windows 8 isn't interested.
When I installed Win8 (at this point, updated to Win8.1 Update) on drive V:, it changed it to C:. Since I'm used to the drive letters as they used to be, I'd like to change it back to V:. I figure I'll have to change all the registry entries for installed programs from C: to V:.
How to confirm that I'll have to manually make those registry changes?
Alright, I just installed my Windows 8 Pro from a USB drive as I was installing it I was installing Windows 8 on the W:/ drive but once it was installed I came to found out that that My C:/ drive which was originally Windows 7's drive letter now belongs to Windows 8, and now the drive that is now Windows 7's is D:/ is is possible to change it back a W: drive or something? and yes, Windows 7 is the main partition on the system, I'm not sure why it changed but it's actually the first time this has happened.
View 1 Replies View RelatedI've installed Windows 8 starting the installer from Windows 8 RP and I've just noticed that it picked up the drive letters from the old system. Now my system drive is Y instead of C , because in the old system that partition was Y. If I try to change the drive letter in the Drive Management it gives an error. how to change system drive letter in Windows 8 RTM?
View 6 Replies View RelatedI tried to change the drive letter because it wont appear, but it didnt work. I have tried the CMD method with the volumes but the volume did not show up. All I know is that its a G-Technology hard drive. I tried formatting it to NTFS but that wont work. Basically I tried everything and nothing works. P.S The drive is Disk1...
View 2 Replies View RelatedI have an SSD drive with 2 partitions on it. 1st partition has Win 7 on it as drive letter C. 2nd Partition has Win 8 on it as Drive letter W. At 1 point in time if I booted to Win 8 the drive letter would dynamically change from drive letter W to Drive letter C and make Win 7 drive letter W. The revers was true if I booted to Win 7. Something has changed somewhere, where this dynamic drive letter changing is no longer working. When I boot to Win 8 the drive letter remains to be drive letter W & Win 7 is still drive C. This is causing problems when I'm booted to Win 8 with regard to installing & using apps while in Win 8 since the C drive is really the Win 7 system drive.
How can I fix this to get back the dynamic flip flopping of drive C? I confess to being somewhat ignorant when dealing with this particular area of things.
I just recently built a new Windows 8 machine. Since I knew I was going to be getting an SSD down the road, I planned ahead:
Nutshell, the C: drive, the boot drive, is at the end of the partition, sized to 220 DB, so I knew it would be smaller than the 240/256GB drive I knew I'd eventually be getting. The Users folder is on the D: drive, so the C: partition is only the OS and apps. Everything's dandy.
I found EasyBCD and used it to move the boot manager over into the C: partition, so theoretically that's all I need to move over to the new drive. So what I want to do is move the C: partition over to the SSD, have it stay C: once it's there, and then have it boot into that partition. (Note that I cannot disconnect the hard drive when it's time to reboot because that's where the Users folder lives and I don't want to break that.)
I keep running into problems with the "keeping it C" part. When I clone the drive over, the old drive stays as C: (as you would expect), and the new drive gets a new letter. Attempts to change those letters using DISKPART from the Win 8 install DVD have been either futile or disastrous.
I've been using the free version of Macrium as my cloning / imaging tool...is there a better free tool I should be using?
i'm using Windows 8 Home 64 Bit.
I used AOMEI Partition Assistant Standard to add a NTFS Partition to my USB drive. I want to store large files over 4GB on this partition, while having the rest of my files on the primary partition which is FAT32. The problem is, when I plug my drive into the computer it only shows the primary partition.
Is there any way to get Windows to show both partitions when I plug the device in? I want to be able to store files on both partitions.
After doing some research, I found that one possible way would be to set the USB device as a "Fixed disk". I was unable to figure out how to do this.
The device is a 32GB Silicon Power Blaze Removable Disk with USB 3.0.
I am trying to get my external hard drives setup from a freshly rebooted installed computer. I recently placed an external hard drive with all my back up files on my computer, but this drive is not going to be my main drive. I have two others I will be using as a main hdd and a backup drive that are brand new.
So, the question is, if I were to use a utility like the Windows 8.1 disk management feature to either delete the drive letter or even change it to another one, will that mess up the external hard drive or even lose data? Because until I transfer my files to my backup disk I am afraid of losing my only copy of my files.
I was recently experimenting with partitions and i had to assign 50 GB of disk space to a partition. Sadly, I noticed that after I deleted it I can't add it back to my main hard drive's space. How I can do this so I have all my disk space again?
View 5 Replies View RelatedI would like to ask what is OEM, EFI and unallocated partitions?How can i merge unallocated partitions into primary one???Another question is when my alienware restart , I just see my alienware Logo, cant enter to BIOS ??Computer logins smoothly just cant seem to enter BIOS.I will attatch an image of my disk management.
View 1 Replies View Relatedi have Ultrabook Dell XPS 15 (Touch screen)
with 2 hard drivers (500GB SATA+ 32GB SSD )
now the question, when i re install windows 8.1
how i can partition the 32 SSD hard drive
should i install windows on it ? or just use it a a normal partition ?
I am currently running Windows 8.1 pro, and I wanted to partition my main drive which is the C: Drive and on that partition run Windows 7 Ultimate.
How to partition the drive in Windows 8.1 but when it comes to doing a dual boot everything I have come across says I need to have Windows 7 installed first then I can add Windows 8.1.
There has to be a way to Run Windows 7 from Windows 8.1 on a dual boot or multi-boot as Windows 8.1 is my main and only OS I am running right now.
I have 16GB of unallocated space in front of System Reserved. I was wondering if there is a way to move the System Reserved to the front. I've used GParted before and I'm guessing I am going to have to make a backup of the C drive and then move it around. (and I know, only 10MB free on C drive. )
View 1 Replies View RelatedI am new to Windows 8, and first time with a laptop. I have 1tb hard drive (minus a few gb) in c drive. d drive is being used as recovery
This is how it was setup. What I would like to do is to partition the amount of space i have from c drive into another drive.
Can manage to partition some hard drive space over to another driver letter, if i do a fresh install of windows, will this new drive be formatted too?
(Just asking this because when I owned a desktop computer, I had two drives. A c-drive and a d-drive. When I re-installed windows 7 on the desktop, all my files were still available on the d-drive, hence asking the above last question).