When I installed Win8 (at this point, updated to Win8.1 Update) on drive V:, it changed it to C:. Since I'm used to the drive letters as they used to be, I'd like to change it back to V:. I figure I'll have to change all the registry entries for installed programs from C: to V:.
How to confirm that I'll have to manually make those registry changes?
I have an SSD drive with 2 partitions on it. 1st partition has Win 7 on it as drive letter C. 2nd Partition has Win 8 on it as Drive letter W. At 1 point in time if I booted to Win 8 the drive letter would dynamically change from drive letter W to Drive letter C and make Win 7 drive letter W. The revers was true if I booted to Win 7. Something has changed somewhere, where this dynamic drive letter changing is no longer working. When I boot to Win 8 the drive letter remains to be drive letter W & Win 7 is still drive C. This is causing problems when I'm booted to Win 8 with regard to installing & using apps while in Win 8 since the C drive is really the Win 7 system drive.
How can I fix this to get back the dynamic flip flopping of drive C? I confess to being somewhat ignorant when dealing with this particular area of things.
I'm booting off my SSD which is drive C: and I have games and programs on an extra hard drive which was origanally drive H: but after a restart it switched to I: and when I go into Disk Management to change it Drive H: isn't there.
View 3 Replies View RelatedAlright, I just installed my Windows 8 Pro from a USB drive as I was installing it I was installing Windows 8 on the W:/ drive but once it was installed I came to found out that that My C:/ drive which was originally Windows 7's drive letter now belongs to Windows 8, and now the drive that is now Windows 7's is D:/ is is possible to change it back a W: drive or something? and yes, Windows 7 is the main partition on the system, I'm not sure why it changed but it's actually the first time this has happened.
View 1 Replies View RelatedI've installed Windows 8 starting the installer from Windows 8 RP and I've just noticed that it picked up the drive letters from the old system. Now my system drive is Y instead of C , because in the old system that partition was Y. If I try to change the drive letter in the Drive Management it gives an error. how to change system drive letter in Windows 8 RTM?
View 6 Replies View RelatedWhen I put my usb in my pc I see on my Computer a new drive letter H:
So now I have: C: D: E:
Floppy: A: and my DVD as F: and a Removeable disk I: but I don't have a any removeable disk on any usb port in my pc.
When I put now my other usb it's assigining it as drive H:
But I need it to be G: since I need to save to it something from a program I saved before and it must be G: not H:
How can I change/force it to be drive letter G: instead H: ?
My C: is a SSD Id like to have back as one disc, one partition..
The 101 mb 'unallocated' It was previously listed as " reserved system protected drive" I removed and formatted its 101 mb...back to empty, unallocated, can I lose that partition??
It shows up under disc management as a part of c...but really has no drive letter at all it just shows as C:
I tried to change the drive letter because it wont appear, but it didnt work. I have tried the CMD method with the volumes but the volume did not show up. All I know is that its a G-Technology hard drive. I tried formatting it to NTFS but that wont work. Basically I tried everything and nothing works. P.S The drive is Disk1...
View 2 Replies View RelatedI have a windows to go installation in a large external hdd, so I have made a second partition to use as data storage.
Now, when I insert the disk on my "normal" windows installation I would expect the data partition to be available... Instead I have to assign a letter to be able to use it.
The disk appears to be online and once assigned a letter you can unplug it and plug it again without having to do the letter assignment again.
BUT, every time I restart the pc I have to do it all over again.
I just recently built a new Windows 8 machine. Since I knew I was going to be getting an SSD down the road, I planned ahead:
Nutshell, the C: drive, the boot drive, is at the end of the partition, sized to 220 DB, so I knew it would be smaller than the 240/256GB drive I knew I'd eventually be getting. The Users folder is on the D: drive, so the C: partition is only the OS and apps. Everything's dandy.
I found EasyBCD and used it to move the boot manager over into the C: partition, so theoretically that's all I need to move over to the new drive. So what I want to do is move the C: partition over to the SSD, have it stay C: once it's there, and then have it boot into that partition. (Note that I cannot disconnect the hard drive when it's time to reboot because that's where the Users folder lives and I don't want to break that.)
I keep running into problems with the "keeping it C" part. When I clone the drive over, the old drive stays as C: (as you would expect), and the new drive gets a new letter. Attempts to change those letters using DISKPART from the Win 8 install DVD have been either futile or disastrous.
I've been using the free version of Macrium as my cloning / imaging tool...is there a better free tool I should be using?
This morning, my laptop wouldn't boot and I got a message saying I needed to use the recovery disk to fix the problem. A little investigating using the command prompt from that disk revealed my system and data partitions had no drive letter assigned to them. A little work with Diskpart fixed that but left me wondering what would have caused them to disappear.
View 1 Replies View RelatedLast night my computer died. Bought it a few months ago and now it's not working.
The problem I got was Exiting PXE Boot ROM. I found these suggestions and followed these instructions: Message during startup: Exiting PXE Boot ROM. However, after changing from ACHI to IDE, my computer now won't start at all.
It doesn't even boot up to the boot screen.
My windows 8 partition is inaccessible. Win 8 won't boot, even after attempted repair and running chkdsk.
This all happened after an automatic update.
I booted to another drive. Windows explorer shows the bad partition letter but no size or contents. Other partitions on the same drive are ok.
I also can see the bad drive contents from a cmd prompt.
That is, I can allocate it one through drive management but it still doesn't show next switch on in My Computer, so I must go in an allocate it one. Otherwise it works fine. Bit tedious after a while.
Do I have to reformat it completely to regain auto allocation of a letter?
Used to be fine, but not now. A USB 3.0 Toshiba 500 gig external drive (sealed unit) doesn't have this problem.
After last "patch-tuesday" my Windows 8.1 don't assign drive letters to hotswaped HDD's and USB keys.
When starting my backupdrive (eSATA), it is now without a drive letter, I can give it one though in disk-management, but before last tuesday, it was given a letter automatic. Same problem when I connect an USB-HDD or an USB-stick.
Is there a way to get back "autoassign of a drive letter"? (don't know the correct word for this function in English).
I'm just going through the process of personalizing a new Inspiron 14z with Windows 8. The one thing that has me stumped are all the partitions that ship installed on the drive, due to a combination of everything being different on Win8, Dell doing things their own way, and GPT formatting. Generally I would like to know what the heck all those partitions are for, but it's fine if that will be a slow learning process. Specifically and immediately, I need to change the drive letter assigned to the "WINRETOOLS" partition. Currently it's D:, and the problem is that for 10 years I've been using D: as my data partition, and quite a number of applications, configurations, settings, etc. assume that all my files are on D:. For instance, by having all my music on D:, I can sync iTunes library and preference files between machines, and all ratings and playlists match from one machine to the next. Same thing for my photos. Same thing for a bunch of utilities like FTP consoles, sync utilities...
In a prior version of Windows, I would just go into Disk Management, right click the partition in question, assign a different drive letter, and job done. On my machine, the 2GB WINRETOOL partition doesn't even show as having a drive letter in Disk Management, despite the fact that it's D: in Win Explorer. Additionally, the only right click option is "help". I've taken that option, and, despite its aspirations, it's not useful.
How can I change that drive letter to something else? Should WINRETOOLS even have a drive letter in Explorer (some posts I've seen indicate that it should be hidden)? If I do manage to change the drive letter, will that break its function, whatever that is?
My machine has a 500GB spinning disk, which has all the aforementioned partitions. I've shrunk the C: partition to 80GB, in preparation for creating a data partition. I have not yet formatted the unassigned space as I would like to solve this WINRETOOLS thing first. Finally, there is a 32GB SSD that I've set up as an Intel Smart Response cache, and it's no longer visible to the OS.
I don't know how this happened, but the Desktop folder under This PC changed to the D: drive. My system has two partitions, the second of which is the D: drive. The Desktop folder was not only renamed to "D:" but redirected to the drive as well. I tried to delete it from the registry editor and then add it back, but the D: keeps coming back instead. The desktop icon is still there, however.
Is there any way to delete the D: drive and bring back the desktop folder instead under This PC? Screenshot is attached.
P.S. In the screenshot, the actual D: drive (supposed to be next to the C: drive) is not shown because I deleted the partition in hopes of getting rid of the D: drive folder showing up under This PC.
I am trying to get my external hard drives setup from a freshly rebooted installed computer. I recently placed an external hard drive with all my back up files on my computer, but this drive is not going to be my main drive. I have two others I will be using as a main hdd and a backup drive that are brand new.
So, the question is, if I were to use a utility like the Windows 8.1 disk management feature to either delete the drive letter or even change it to another one, will that mess up the external hard drive or even lose data? Because until I transfer my files to my backup disk I am afraid of losing my only copy of my files.
Windows 8.1 failing to boot when any usb storage drive is plugged in during boot. My only solution is to unplug everything each boot unless I use my KVM switch which does not support usb 3.0.
View 2 Replies View RelatedI formatted a HD that had the bootmanager on it. The Win 8 disc can't repair it. I'm also getting a message that my C: drive is locked.
View 6 Replies View RelatedI'm running Win 8 Pro which is installed on my SSD and I need to remove my secondary drive and connect it to another PC. When I do this, I get a boot error. Why an error shows up especially when it is not a boot drive.
Error and My Disk Management information is attached as an image to this message.
C: is the SSD and K: is my PATA drive which I want to move.
I am wanting to install my W8 O/S onto a 64GB SSD drive. I just want to use this for boot purposes and to fit some programs on as well. Everything else I am wanting to have stored on a 1TB WD Black drive. I want to point my libraries (Docs, Music, pictures) towards the 1TB drive. How do I do this?
View 2 Replies View RelatedHe has a DELL XPS machine, an i7 newer model running 8.1, he's got a main internal HD as C: and a permanently added USB drive with 3 partitions ad D: E: and F: but on reboot the F: partition suddenly goes up a letter to G:, the other two stay the same.
Apparently its been fine until recently when this started happening, I made sure the used Disk Management to change the letter back but on reboot its back to G:
He has no other devices attached and any other USB drives either have a selected letter near the end of the alphabet or are not assigned a set letter but none are attached when the machine boots. It sounds like the F: is being reserved by something, possibly registry wise but I don't have the machine in front of me to check and I would rather its me using regedit and he's got slippery fingers due to arthritis and is prone to over clicking and wrong key presses.
where to check or what to check, I've done as much as I can via Skype but at a loss as to why its only doing it to one partition and always the same one, also did a dischk and the partiton is ok.
Why I am not able to choose the underlined letter when hitting alt-x which brings up the quick list of shortcuts? I was able to before and now it no longer allows it. I have to select w/the mouse. No huge deal but want things to be how they were. I 've also tried using Win 8's "refresh" to no avail.
View 9 Replies View RelatedI have a long alphabetical list of words straight down the page and they are 1 word per line.
I'd like to keep the alphabetical order but sort in groups by first letter with 5 spaces between each.
The list is too long to click in front of each word, backspace & tab. This is how I want it to appear
apple attire atom
cab cat cage camel cart
deep deer
To my own stupidity I decided to update my computer from Windows 8 to 8.1, every thing would be fine if not for the fact that my screen is now stuck as a letterbox.
The native for my monitor is 1920-1080 and was what I was running at pre-update, after restarting, my screen is confined to a letterbox setting. Changing the resolution does nothing, when looking for a solution I came across a post from this thread:
8.1 upgrade - generic video driver problem
I've got the same graphics card as the OP and have found the same events. My question is what did he mean when he said
"I deleted the AMD leaf-item (Control Panel, Display adapters, AMD Radeon HD 7650D)and rebooted the system." in post 3.
Did he go ahead and un-install it? Clarification on what he exactly done would be great.
btw, if I did go ahead and un-install my graphics card like the OP originally suggested, would it reinstall on restart?
Windows Office 2007 - There is no better - however the migration to Win 8 ruined all my default settings! Anyhoo, I have already sussed out that one may apply headers and footers to repeating pages, but I'm very confused as to how one may apply ones business design - which is a WHOLE page, over which I type my gumpf... So far, I just insert a text box onto the page, but this only works for one page at a time. The answer should lie in converting it all to a JPG.
View 6 Replies View RelatedI have three hard drives. One is a Kingston Hyperx SSD 120GB. The other two are for internal storage and are WD 500GB Blacks. I recently upgraded my computer. My new mother board is the ASUS M5A99X. I installed Windows 8 just fine back in Dec 2012 and it worked up until April-Mayish. My USB Hub was causing my computer to halt before POST. After exchanging it with a new hub, I was able to boot just fine.
Later that same day, I cleaned out the dust in my computer and added another harddrive. I wasn't able to boot Windows 8. It would just stop with a blinking cursor right before it should show the four blue panes. I went into BIOS and it didn't have my SSD listed. I accidentally unplugged the SATA cable for my SSD and forgot to plug it back in. After I plugged it back in I set the boot priority back to my SSD first.
I still couldn't boot so inserted my Windows CD to reformat. After it says "Press any key to boot from CD...." I didn't press anything and it loaded into Windows just fine. I loaded Windows this way for a while until I was able to troubleshoot it. After reformatting, I get "Please select proper boot device.." message. If I put the CD in, that goes away and it loads into windows after saying "Press any key to boot from the CD..." Here's what I've done to troubleshoot so far:
1. Set SSD to first in boot priority order in BIOS. Forced boot to my SSD in BIOS. Changed SATA from AHCI to RAID (lol) to IDE.
I've used bootrec.exe and tried
bootrec /RebuildBcdbootrec /fixMbrbootrec /fixboot
This still didn't resolve my issue.
2. I flashed my BIOS to 1708 because it was going to fix an issue I had with a USB device.
3. I reformatted Windows 8 with all drives unplugged except my SSD.
4. I've unplugged all SATA devices except my harddrive and tried to boot.
5. I've set the 2nd partition (90+GB) to active partition on my SSD.
My next step is to RMA the motherboard.
I got this new Asus Transformer which is a Windows 8.1 system.
I made a few images with Macrium Reflect and created an UEFI recovery Flash Drive (with Macrium) for the Macrium recovery program. I can set the BIOS to boot from the stick (in the temporary or permanent BIOS settings). Problem is, when I hit Enter, it ignores the stick and boots directly into 8.1.
Is there another setting in the BIOS that I have to make in order to have it boot from the stick.
remotely via Teamviewer bought a Win 8 Lenovo laptap .
It's a Lenovo - IdeaPad Yoga 2 Pro Ultrabook with Win 8.1 preinstalled
Lenovo IdeaPad Yoga 2 Pro Ultrabook 2in1 13.3" TouchScreen Laptop 8GB Memory Yoga 2 Pro-59386391 -
She also bought an external USB DVD burner.I created a bootable Macrium Rescue disc so we can restore from a Backup Image if needed.The laptop won't boot from the USB DVD drive and gets a "blocked by the current security policy" error.
How can I boot from an external USB drive? Is there a setting in BIOS that will allow booting from the DVD?
I found this thread in the Lenovo forum for a different model that mentions "turn off secure boot", if it's an available option.
I cannot boot from my CD-DVD drive even after I turn OFF Secure Boot and UEFI. Then, yes, my machine DOES list my CD-DVD as a boot option, but when I actually try to boot from the CD-DVD, I get an error message. (Optiplex 7010 Mini-Tower with Win 8 Pro 64-bit, 8 GB RAM, 500 GB hard drive and an Intel i5 3470 processor. It has BIOS version A16.)
I have a good, detailed thread on this issue in Desktop Hardware Forum: [URL] ....